Model No: Roto Boss 530
Type of Machine: Rear Tine Tiller
Power Unit: Combustion Engine (details not check detailed engines )
Power Transmission: Uses a belt
Adjustments for Tilling Depth: Five settings (1", 1.5", 3", 4", 6")
Width of Tillage: Not specified
Clutch Control: There are separate drive clutch and tine clutch
Handle Adjustment: There are three positions for adjustment of handle heights
Weight: Not specified
Warranty: Limited warranty for one year
Lubrication: Churning cases are pre-lubricated; other components require periodic lubrication
Safety Components: Require a spark arrester for use in certain areas.
Q: Can you tell me how to start Roto Boss 530 tiller?
A: Start with throttle control lever turned in the START position, choke lever moved into CHOKE position, at the side of the tiller while the starter handle is pulled out. When engine starts, turn the choke lever slowly into the OFF position.
Q: Which type of fuel may be for the tiller?
A: Recommended fuel is clean, fresh and lead-free gasoline. Regular grade leaded gasoline may be also used.
Q: How should the maximum depth of tilling be changed?
A: Any modifications can be made to the depth bar to meet the requirements of the maximum tilling depth needed. For this purpose, temporally take off the clevis pin and hairpin cotter, relocate the depth bar to its intended position, and insert the set pins back to position.
Q: What are the regular procedures to be followed in the maintenance of the Roto Boss 530?
A: The basic maintenance includes – Checking and changing the engine oil, Air cleaner service, Lubricating movable parts and Spark plug checking.
Q: Am I entitled to get a warranty for the Roto Boss 530?
A: Yes, a limited warranty for a period of one year is being offered for material and workmanship defects.