Whitehall Manufacturing T-12-M User Manual

Thermalator Mobile

Moist Heating Unit

Models T-8-M & T-12-M

Sh own fr om Lef t t o Righ t

T-8 -M and T-12- M

Moist Heat Therapy

Picture may show some available options

Whitehall Thermalators have the best elements of
a thermal therapy unit to maintain a constant water
temperature for comfortable effective therapy. Model
T-8-M is recommended for use in medium clinics.
Model T-12-M is recommended for use in larger
clinics.

Unit is fabricated from heavy gauge, type 304
stainless steel polished to a satin finish. Cover has a
continuous hinge pin and a built in stop that will
keep it in the upright position when open.

Interior Wire Rack is vinyl coated stainless steel
and will hold Thermal Packs in the upright position.

Heating Unit has a built-in adjustable thermostat
which ranges between 65° and 165°F, and is
certified to UL Standards. On/off switch had a built-in
light to indicate that the unit is on. (Thermalators are
furnished complete with rack and a set of Thermal
Packs.)

GUIDE SPECIFICATIONS

Thermalator shall be fabricated from heavy gauge,
type 304 stainless steel, polished to satin finish.
Cover shall have a continuous hinge pin and a built­in stop that will hold it in the upright position when
open. Heating unit is certified to UL Standards and
shall have an adjustable thermostat which ranges
between 65° and 165°F. On/off switch shall have a
built-in light to indicate when unit is on.
(Thermalators are furnished complete with rack and
a set of Thermal Packs.)

Please visit www.whitehallmfg.com
for most current specifications.

Whitehall Mfg. > P.O. Box 3527 > City of Industry, CA 91744 > [phone] > [phone] > Fax [phone]

Member of
U.S. Green
Building
Council

Recyclable
Product

T-M

Last Update: 12/03/13

Moist Heat Therapy

MODEL NUMBER AND OPTIONS SELECTION

BASE MODEL NUMBER

q

T Thermalator 115 Volt

q E

T Thermalator 220 Volt ( )

CAPACITY (Must Specify)

q
q

8 Thermal Packs, 10” x 12”

-8

12 Thermal Packs, 10” x 12”

-12

PRODUCT OPTIONS (Must Specify)

-ADH Auxiliary Drain Hose, 5 ft.

q

-DG Digital Thermometer

q

-EG Enviro Glaze Color Powder Coating

q

Specify Color:____________________

(Special Finish Consult Factory)

-GFI Ground Fault Interrupter

q

TYPE

q

Mobile

-M

All dimension figures
in parentheses are
in millimeters.

15-1/2" 17-1/2"

(395) (445)

16"

(405)

1

24"

(610)

20-1/2"

(520)

1

2

2

32-3/4"

(830)

3

(815)

4

3

32"

4

T-8-M
Mobile Thermalator

NOTES:

1) Lid with Hinge Pin & Stop

2) Stainless Steel Thermalator Tank

3) Illuminated On/Off Indicator Switch

4) 3/4" (20 mm) Hose Bib Drain

SELECTION SUMMARY & APPROVAL FOR MANUFACTURING

All dimensions are nominal and subject to
manufacturer's change without notice. Whitehall
assumes no responsibility fo use of void or
suspended data © Whitehall Manufacturing,

Member of Morris Group International.
Please visit www.whitehallmfg.com for most
current specifications.

Whitehall Mfg. > P.O. Box 3527 > City of Industry, CA 91744 > [phone] > [phone] > Fax [phone]

SELECTION SUMMARY & APPROVAL FOR MANUFACTURING

Model Number & Options______________________________________________Quantity___________

Model Number & Options______________________________________________Quantity___________
Company_________________________________________________________Date_______________

Company_________________________________________________________Date_______________
Contact_____________________________________Title_____________________________________

Contact_____________________________________Title_____________________________________

Approval for Manufacturing/Signature_____________________________________________________

Approval for Manufacturing/Signature_____________________________________________________

T-12-M
Mobile Thermalator

T-M

Last Update: 12/03/13