Whitehall Manufacturing S-90-M User Manual

S Series

90 Gallon

Mobile Whirlpool

S-90-M

Product photo/image above may show some available options

Sports Whirlpools

Use

Whitehall S-90-M Mobile Whirlpool is recom­mended for treatment and prevention of sports
injuries allowing coverage of the extremities, hips
and back area. Professional, college and high
school athletic trainers find the larger design most
suitable when treating today’s athletes.

Tank Capacity is 90 gallons.

Whirlpool Tank is 46”L x 24”W x 25”D and

is seamless welded construction, fabricated from
heavy gauge, type 304 stainless steel, polished to a
satin finish. Tank rim is reinforced with a concealed
stainless steel rod. Tank is fitted with an auxiliary
drain valve. Tank bottom is a seamless, rounded
covered design to minimize bacteria buildup.

Heavy Duty Swivel Casters support all mobile
models. Rear pair of casters are lockable for stabi­lizing whirlpool during treatment.

Turbine Raising and Lowering Device permits
adjustment of desired height and direction of
water agitation towards the area of the body to be
treated. It is spring balanced and provided with a
locking device.

Turbine Assembly functions both as agitator and
emptying device. It is equipped with Underwriters
Laboratory listed 1/2 HP jet pump motor protected
with an ABS plastic shell, and automatic thermal
overload protector, and lifetime-sealed bearings.
All parts contacting the water are stainless steel,
chrome plated brass or bronze.

Thermometer is provided with a dual scale, adjust­able calibration, and a stem inserts into a retainer
to prevent rattle during whirlpool agitation.

Guide Specifications

Provide Whitehall Mobile Whirlpool (specify model
number and options) with a 90-gallon capacity,
46”L x 24”W x 25”D. Whirlpool shall be fab­ricated from heavy gauge, type 304 stainless
steel. Construction shall be seamless welded and
exposed surfaces shall be polished to satin finish.
Tank shall have a reinforced rim and shall be fitted
with an auxiliary drain valve. Bottom of tank shall
be a seamless, rounded coved design to minimize
bacteria build up. Whirlpool shall have heavy duty
swivel casters with locking device on rear pair of
casters. Provide a turbine assembly with raising
and lowering device which functions both as agi­tator and emptying device, permits adjustment of
desired height, direction of water agitation, and
can be locked into place. Turbine assembly shall
be UL listed 1/2 HP jet pump motor with auto­matic thermal overload protector, and lifetime­sealed bearings. Provide a thermometer with a
stem retainer to prevent rattle when whirlpool is in
operation.

Whitehall Mfg. > P.O. Box 3527 > City of Industry, CA 91744 > [phone] > [phone] > FAX [phone]

S-90-M

Last Update: 2/14/08

Sports Whirlpools

MODEL NUMBER AND OPTION SELECTIONS

Series

m -S Sports Series

Capacity

m -90 Gallons

Type

m -M Mobile Whirlpool

Suffix Options

(See Whirlpool Option Section for Details)

m -ADH Auxiliary Drain Hose Assembly
m -AHC1 Adjustable High Chair with Casters
m -AHC2 Adjustable High Chair with Rubber Tips
m -ARS Arm Rest Support
m -AS2 Adjustable Suspension Seat
m -CTS2 Combination Table with Side Seats

m -EG Enviro Glaze Color Powder Coating -

Specify Color:________________________

(Special Finish Consult Factory)

m -GFI Ground Fault Interrupter
m -PCS Pump Cover Strainer
m -PHS2 Patient Handling System (Chair Type)
m -RHG Rubber Hand Grips
m -SDP Separate Drain Pump
m -TTS2 Tank Top Seat
m -WLS Water Level Sensor

Note: Separate Drain and Overflow Assembly (-SDO)
is not available with Model S-90-M.

Turbine Assembly

Electrical on standard turbine supplied is 115 V 60 Hz
if 220 V is required please specify:

m 50 Hz m 60 Hz

Note: Electrical requirements are 8 Amps / 115 Volts/ 60Hz/ 3 Pole GFI Receptacle.

All dimension figures in
parentheses are in millimeters.

All dimensions are nominal and subject to manufac­turer’s change without notice. Whitehall assumes no
responsibility for use of void or suspended data. © 2008
Whitehall Manufacturing, A Division of Acorn Engineering
Company. Please visit www.whitehallmfg.com for most
current specifications.

Whitehall Mfg. > P.O. Box 3527 > City of Industry, CA 91744 > [phone] > [phone] > FAX [phone]

SELECTION SUMMARY & APPROVAL FOR MANUFACTURING

Model Number & Options_____________________________________________ Quantity_____________
Company_________________________________________________________ Date___________________
Contact________________________________________________ Title______________________________
Approval for Manufacturing/Signature_______________________________________________________

S-90-M

Last Update: 2/14/08