Whitehall Manufacturing S-85-S User Manual

S Series

85 Gallon

Stationary Whirlpool

S-85-S

Product photo/image above may show some available options

Sports Whirlpools

Use

Whitehall S-85-S Stationary Whirlpool is rec­ommended for treatment and prevention of sports
injuries allowing coverage of the extremities, hips
and back area. Professional, college and high
school athletic trainers find the larger design most
suitable when treating today’s athletes.

Tank Capacity is 85 gallons.

Whirlpool Tank is 48”L x 20”W x 25”D and is

seamless welded construction, fabricated from heavy
gauge, type 304 stainless steel, polished to a satin
finish. Tank rim is reinforced with a concealed stain­less steel rod. Tank is fitted with an auxiliary drain
valve. Tank bottom is seamless, rounded coved
design to minimize bacteria buildup. Tank is also
provided with an extended stainless steel skirt flush
to the floor line to conceal internal drain piping.

A 2” Combination Drain and Overflow, and a Filler
Spout are provided. (See roughing-in dimensions
on the reverse side).

Turbine Raising and Lowering Device permits
adjustment of desired height and direction of
water agitation towards the area of the body to be
treated. It is spring balanced and provided with a
locking device.

Turbine Assembly functions both as agita­tor and emptying device. It is equipped with
Underwriters Laboratory listed 1/2 HP jet pump
motor protected with an ABS plastic shell, and

automatic thermal overload protector, and
lifetime-sealed bearings. All parts contacting the
water are stainless steel, chrome plated brass or
bronze.

Thermometer is provided with a dual scale, adjust­able calibration, and a stem inserts into a retainer
to prevent rattle during whirlpool agitation.

GUIDE SPECIFICATIONS

Provide Whitehall Stationary Whirlpool (specify
model number and options) with a 85-gallon
capacity, 48”L x 20”W x 25”D. Whirlpool shall be
fabricated from heavy gauge, type 304 stainless
steel. Construction shall be seamless welded and
exposed surfaces shall be polished to satin finish.
Tank shall have a reinforced rim and shall be fitted
with a stainless steel skirt flush to the floor line.
Bottom of tank shall be a seamless, rounded coved
design to minimize bacteria build up. Provide a 2”
combination drain and overflow, and a filler spout.
Provide a turbine assembly with raising and lower­ing device which functions both as agitator and
emptying device, permits adjustment of desired
height, direction of water agitation, and can be
locked into place. Turbine assembly shall be UL list­ed 1/2 HP jet pump motor with automatic thermal
overload protector, and lifetime-sealed bearings.
Provide a 3” dial thermometer with a stem retainer
to prevent rattle when whirlpool is in operation.

Whitehall Mfg. > P.O. Box 3527 > City of Industry, CA 91744 > [phone] > [phone] > FAX [phone]

S-85-S

Last Update: 2/14/08

Sports Whirlpools

MODEL NUMBER AND OPTION SELECTIONS

Series

m -S Sports Series

Capacity

m -85 Gallons

Type

m -S Stationary Whirlpool

Suffix Options

(See Whirlpool Option Section for Details)

m -AHC1 Adjustable High Chair with Casters
m -AHC2 Adjustable High Chair with Rubber Tips
m -ARS Arm Rest Support
m -AS1 Adjustable Suspension Seat
m -CTS1 Combination Table with Side Seats
m -EG Enviro Glaze Color Powder Coating -

m -GFI Ground Fault Interrupter
m -MXT1 Thermostatic Mixing Valve (15 G.P.M.)
m -MXT2 Thermostatic Mixing Valve (25 G.P.M.)
m -MXWH Washout Hose Attachment for MXT Valves
m -PCS Pump Cover Strainer
m -PHS2 Patient Handling System (Chair Type)
m -RHG Rubber Hand Grips
m -SDO Separate Drain and Overflow Assembly
m -TTS1 Tank Top Seat
m -WLS Water Level Sensor

Turbine Assembly

Electrical on standard turbine supplied is 115 V 60 Hz
if 220 V is required please specify:

m 50 Hz m 60 Hz

Specify Color:________________________

(Special Finish Consult Factory)

Note: Electrical requirements are 8 Amps / 115 Volts/ 60Hz/ 3 Pole GFI Receptacle.

All dimension figures
in parentheses are
in millimeters.

All dimensions are nominal and subject to manufac­turer’s change without notice. Whitehall assumes no
responsibility for use of void or suspended data. © 2008
Whitehall Manufacturing, A Division of Acorn Engineering
Company. Please visit www.whitehallmfg.com for most
current specifications.

Whitehall Mfg. > P.O. Box 3527 > City of Industry, CA 91744 > [phone] > [phone] > FAX [phone]

SELECTION SUMMARY & APPROVAL FOR MANUFACTURING

Model Number & Options_____________________________________________ Quantity_____________
Company_________________________________________________________ Date___________________
Contact________________________________________________ Title______________________________
Approval for Manufacturing/Signature_______________________________________________________

S-85-S

Last Update: 2/14/08