Whitehall Manufacturing HL-22-M User Manual

HL Series

Hydrolift

HL-10, HL-15-M, HL-22-M

(Model HYL-15-M shown in photo

includes HL-15-M with P-)

Product photo/image above may show some available options

Hydrolift

The Whitehall HL Series Hydrolift is recom­mended for the raising and lowering of a single
Whitehall Hydrotherapy Whirlpool to treat lower
and upper extremities. The Hydrolift is fully adjust­able, raising the whirlpool rim to any height up to
32”, 36” or 38” depending on the model being
specified. In normal operating conditions, the
Hydrolift will remain as a stationary lift. However,
both Hydrolift and whirlpool may be moved by
lowering the whirlpool to the floor and using the
whirlpool casters.

New or existing Whitehall Hydrotherapy
Whirlpool models P-10-M, P-15-M, E-15-M,

P-22-M, E-22-M can be used with the HL series
Hydrolift. Due to variable dimensions, indicate if
whirlpool suffix option -SDP (Separate Drain Pump)
is specified with whirlpool.

Hydrolift Frame, Clamp and Push Bar are con­structed of heavy gauge, type 304 stainless steel,
polished to a satin finish. The base of the frame sits
underneath the whirlpool to prevent any possible
obstacle. The frame is of a telescoping design and
includes a tamper resistant clamp to secure the
Hydrolift to the whirlpool with a push bar to assist
when moving.

Crank Handle to raise and lower whirlpool is eas­ily adjustable and includes an integral brake lever
to lock the handle and whirlpool in place. A tension
adjuster is provided at the handle to regulate any
changes in weight being lifted.

GUIDE SPECIFICATIONS

Provide a Whitehall Hydrolift (specify model number
and options) for use with new or existing Whitehall
Hydrotherapy Whirlpool (specify model number).
Hydrolift is to raise whirlpool rim above the floor
(specify height dimension based on Hydrolift model
being specified). Frame is to include a vandal resis­tant clamp for attaching the whirlpool and push bar
to assist when moving the whirlpool. Frame, clamp
and push bar are to be steel, with a satin finish.
Crank handle is to include an integral brake lever
to lock the handle in place and tension adjuster.

Whitehall Mfg. > P.O. Box 3527 > City of Industry, CA 91744 > [phone] > [phone] > FAX [phone]

HL

Last Update: 2/14/08

Hydrolift

MODEL NUMBER AND OPTION SELECTIONS

Series

m -HL Hydrolift

Capacity

m -10 Gallons
m -15 Gallons
m -22 Gallons

Type

m -M Mobile

Suffix Options

(See Whirlpool Option Section for Details)

m -EG Enviro Glaze Color Powder Coating ­ Specify Color:________________________

(Special Finish Consult Factory)

m -SDP Separate Drain Pump

All dimensions are nominal and subject to manufac­turer’s change without notice. Whitehall assumes no
responsibility for use of void or suspended data. © 2008
Whitehall Manufacturing, A Division of Acorn Engineering
Company. Please visit www.whitehallmfg.com for most
current specifications.

Whitehall Mfg. > P.O. Box 3527 > City of Industry, CA 91744 > [phone] > [phone] > FAX [phone]

SELECTION SUMMARY & APPROVAL FOR MANUFACTURING

Model Number & Options_____________________________________________ Quantity_____________
Company_________________________________________________________ Date___________________
Contact________________________________________________ Title______________________________
Approval for Manufacturing/Signature_______________________________________________________

HL

Last Update: 2/14/08