Whitehall Manufacturing H-90-M User Manual

H Series

90 Gallon

Mobile Whirlpool

H-90-M

Product photo/image above may show some available options

Hi-Boy Whirlpools

Use

Whitehall H-90-M Mobile Whirlpool is
recommended for shallow or deep body immersion
offering complete coverage of extremities as well as
the entire back and shoulder area with greater patient
comfort.

Tank Capacity is 90 gallons.

Whirlpool Tank is 48”L x 20”W x 28”D and is

seamless welded construction, fabricated from
heavy gauge, type 304 stainless steel, polished to a
satin finish. Tank rim is reinforced with a concealed
stainless steel rod. Tank is fitted with an auxiliary
drain valve. Tank bottom is a seamless, rounded
covered design to minimize bacteria buildup.

Heavy Duty Swivel Casters support all mobile
models. Rear pair of casters are lockable for stabi­lizing whirlpool during treatment.

Turbine Raising and Lowering Device permits
adjustment of desired height and direction of water
agitation towards the area of the body to be
treated. It is spring balanced and provided with a
locking device.

Turbine Assembly functions both as agitator and
emptying device. It is equipped with Underwriters
Laboratory listed 1/2 HP jet pump motor protected
with an ABS plastic shell, and automatic ther­mal overload protector, and lifetime-sealed bear-

Member of
U.S. Green
Building Council

Recycleable
Product

ings. All parts contacting the water are stainless
steel, chrome plated brass or bronze.

Drain options auxiliary drain valve on the bottom of
the unit. The H-90-M-DS is constructed with an integral
sump which reduces residual water and eliminates the
need for a drain.

Thermometer is provided with a dual scale, adjust­able calibration, and a stem inserts into a retainer
to prevent rattle during whirlpool agitation.

GUIDE SPECIFICATIONS

Provide Whitehall Mobile Whirlpool (specify model
number and options) with a 90-gallon capacity,
48”L x 20”W x 28”D. Whirlpool shall be fab­ricated from heavy gauge, type 304 stainless
steel. Construction shall be seamless welded and
exposed surfaces shall be polished to satin finish.
Tank shall have a reinforced rim and shall be fitted
with an auxiliary drain valve. Bottom of tank shall
be a seamless, rounded coved design to minimize
bacteria build up. Whirlpool shall have heavy duty
swivel casters with locking device on rear pair of
casters. Provide a turbine assembly with raising and
lowering device which functions both as agi­tator and emptying device, permits adjust­ment of desired height, direction of water agi­tation, and can be locked into place. Turbine
assembly shall be UL listed 1/2 HP jet pump
motor with automatic thermal overload pro­tector, and lifetime-sealed bearings. Provide a
thermometer with a stem retainer to prevent rattle
when whirlpool is in operation.

Whitehall Mfg. > P.O. Box 3527 > City of Industry, CA 91744 > [phone] > [phone] > FAX [phone]

H-90-M

Last Update: 9/15/09

Hi-Boy Whirlpools

Turbine
raising
& lowering
device

28”

(710)

35”

(890)

20”

(510)

48”

(1220)

tank
floor

bottom

1/2 hp jet pump motor

Variable pressure control

Thermometer

Auxiliary drain valve

Standard

mobile

whirlpool

H-90-M

Stainless steel tank

Sump

Mobile whirlpool

with sump

H-90-M-DS

ELECTRIC REQUIREMENTS:

Amps: 8
Volts: 115
Hertz: 60
GFI Receptacle

MODEL NUMBER AND OPTION SELECTIONS

Series

m -H Hi-Boy Series

Capacity

m -90 Gallons

Type

m -M Mobile Whirlpool
m -M-DS Mobile Whirlpool with Sump

Suffix Options (See Whirlpool Option Section for Details)

m -ADH Auxiliary Drain Hose Assembly
m -AHC1 Adjustable High Chair with Casters
m -AHC2 Adjustable High Chair with Rubber Tips
m -ARS Arm Rest Support
m -AS1 Adjustable Suspension Seat
m -CTS1 Combination Table with Side Seats

m -EG Enviro Glaze Color Powder Coating -

Specify Color:________________________

(Special Finish Consult Factory)

m -GFI Ground Fault Interrupter
m -PCS Pump Cover Strainer
m -PHS2 Patient Handling System (Chair Type)
m -RHG Rubber Hand Grips
m -TTS1 Tank Top Seat

Turbine Assembly

Electrical on standard turbine supplied is 115 V 60 Hz
if 220 V is required please specify:

m 50 Hz m 60 Hz

All dimension figures in parentheses are in millimeters.

All dimensions are nominal and
subject to manufacturer’s change
without notice. Whitehall assumes
no responsibility for use of void or
suspended data. © 2008 Whitehall
Manufacturing, A Division of Acorn
Engineering Company. Please visit
www.whitehallmfg.com for most
current specifications.

Whitehall Mfg. > P.O. Box 3527 > City of Industry, CA 91744 > [phone] > [phone] > FAX [phone]

SELECTION SUMMARY & APPROVAL FOR MANUFACTURING

Model Number & Options_____________________________________________________________ Quantity_____________

Company___________________________________________________________________ Date_________________________

Contact_______________________________________________________ Title_______________________________________

Approval for Manufacturing/Signature_______________________________________________________________________

H-90-M

Last Update: 9/15/09