Whitehall Manufacturing H-60-M User Manual

H Series

60 Gallon

Mobile Whirlpool

H-60-M

Product photo/image above may show some available options

Hi-Boy Whirlpools

Use

Whitehall H-60-M Mobile Whirlpool is
recommended for shallow or deep body immersion
offering complete coverage of the lower extremities
as well as the lower back and hip.

Tank Capacity is 60 gallons.

Whirlpool Tank is 36”L x 20”W x 28”D and is

seamless welded construction, fabricated from heavy
gauge, type 304 stainless steel, polished to a satin
finish. Tank rim is reinforced with a concealed stain­less steel rod. Tank bottom is a seamless, rounded
covered design to minimize bacteria buildup.

Heavy Duty Swivel Casters support all mobile
models. Rear pair of casters are lockable for stabi­lizing whirlpool during treatment.

Turbine Raising and Lowering Device permits
adjustment of desired height and direction of water
agitation towards the area of the body to be
treated. It is spring balanced and provided with a
locking device.

Turbine Assembly functions both as agitator and
emptying device. It is equipped with Underwriters
Laboratory listed 1/2 HP jet pump motor protected
with an ABS plastic shell, and automatic thermal
overload protector, and lifetime-sealed bearings.
All parts contacting the water are stainless steel,
chrome plated brass or bronze.

Member of
U.S. Green
Building Council

Recycleable
Product

Drain options auxiliary drain valve on the bottom
of the unit. The H-60-M-SDP has a bottom drain,
leading to a separate, concealed water evacation
pump. A hose is attached to the side of the unit
to facilitate the evacuation. The H-60-M-DS is
constructed with an integral sump which reduces
residual water and eliminates the need for a drain.

Thermometer is provided with a dual scale, adjust­able calibration, and a stem inserts into a retainer
to prevent rattle during whirlpool agitation.

GUIDE SPECIFICATIONS

Provide Whitehall Mobile Whirlpool (specify model
number and options) with a 60-gallon capacity,
36”L x 20”W x 28”D. Whirlpool shall be fabri­cated from heavy gauge, type 304 stainless steel.
Construction shall be seamless welded and exposed
surfaces shall be polished to satin finish. Tank shall
have a reinforced rim. Bottom of tank shall be
a seamless, rounded coved design to minimize
bacteria build up. Whirlpool shall have heavy duty
swivel casters with locking device on rear pair of
casters. Provide a turbine assembly with raising and
lowering device which functions both as agita­tor and emptying device, permits adjustment of
desired height, direction of water agitation, and
can be locked into place. Turbine assembly shall
be UL listed 1/2 HP jet pump motor with auto­matic thermal overload protector, and lifetime­sealed bearings. Provide a thermometer with a
stem retainer to prevent rattle when whirlpool is in
operation.

Whitehall Mfg. > P.O. Box 3527 > City of Industry, CA 91744 > [phone] > [phone] > FAX [phone]

H-60-M

Last Update: 9/15/09

Series

m -H Hi-Boy Series

Capacity

m -60 Gallons

Type

m -M Mobile Whirlpool
m -M-DS Mobile Whirlpool with Sump
m -M-SDP Mobile Whirlpool with Separate Drain Pump

Suffix Options (See Whirlpool Option Section for Details)

m -ADH Auxiliary Drain Hose Assembly
m -AHC1 Adjustable High Chair with Casters
m -AHC2 Adjustable High Chair with Rubber Tips
m -ARS Arm Rest Support

ELECTRIC REQUIREMENTS:

Amps: 8
Volts: 115
Hertz: 60
GFI Receptacle

36”

(915)

H-60-M

Standard

mobile

whirlpool

Hi-Boy Whirlpools

MODEL NUMBER AND OPTION SELECTIONS

m -AS1 Adjustable Suspension Seat
m -CTS1 Combination Table with Side Seats

m -EG Enviro Glaze Color Powder Coating ­ Specify Color:________________________

(Special Finish Consult Factory)

m -GFI Ground Fault Interrupter
m -PCS Pump Cover Strainer
m -PHS2 Patient Handling System (Chair Type)
m -RHG Rubber Hand Grips
m -TTS1 Tank Top Seat
m -WLS Water Level Sensor

Turbine Assembly

Electrical on standard turbine supplied is 115 V 60 Hz
if 220 V is required please specify:

m 50 Hz m 60 Hz

All dimension figures in parentheses are in millimeters.

H-60-M-SDP

Mobile whirlpool

with separate

drain pump

20”

(510)

Stainless steel tank

1/2 hp jet pump motor

Variable pressure control

28”

(710)

35”

tank

(890)

floor

bottom

All dimensions are nominal and
subject to manufacturer’s change
without notice. Whitehall assumes
no responsibility for use of void or
suspended data. © 2008 Whitehall
Manufacturing, A Division of Acorn
Engineering Company. Please visit
www.whitehallmfg.com for most
current specifications.

Top view

shows

drain hose

Thermometer

Turbine
raising
& lowering
device

Auxiliary drain valve

SELECTION SUMMARY & APPROVAL FOR MANUFACTURING

Model Number & Options_____________________________________________________________ Quantity_____________

Company___________________________________________________________________ Date_________________________

Contact_______________________________________________________ Title_______________________________________

Approval for Manufacturing/Signature_______________________________________________________________________

H-60-M-DS

Mobile whirlpool

with sump

Sump

Whitehall Mfg. > P.O. Box 3527 > City of Industry, CA 91744 > [phone] > [phone] > FAX [phone]

H-60-M

Last Update: 9/15/09