Whitehall Manufacturing H-105-S User Manual

H Series

105 Gallon

Stationary Whirlpool

H-105-S

Product photo/image above may show some available options

Hi-Boy Whirlpools

Use

Whitehall H-105 Stationary Whirlpool is
recommended for shallow or deep body immersion
offering complete coverage of extremities as well
as the entire back and shoulder area with greater
patient comfort.

Tank Capacity is 105 gallons.

Whirlpool Tank is 48”L x 24”W x 28”D and is

seamless welded construction, fabricated from heavy
gauge, type 304 stainless steel, polished to a satin
finish. Tank rim is reinforced with a concealed stain­less steel rod. Tank bottom is seamless, rounded
coved design to minimize bacteria buildup. Tank
is also provided with an extended stainless steel
skirt flush to the floor line to conceal internal drain
piping.

A 2” Combination Drain and Overflow, and a Filler
Spout are provided. (See roughing-in dimensions
on the reverse side).

Turbine Raising and Lowering Device permits
adjustment of desired height and direction of
water agitation towards the area of the body to be
treated. It is spring balanced and provided with a
locking device.

Turbine Assembly functions both as agitator and
emptying device. It is equipped with Underwriters
Laboratory listed 1/2 HP jet pump motor protected
with an ABS plastic shell, and automatic thermal

Member of
U.S. Green
Building Council

Recycleable
Product

overload protector, and lifetime-sealed bearings.
All parts contacting the water are stainless steel,
chrome plated brass or bronze.

Thermometer is provided with a dual scale,
adjustable calibration, and a stem inserts into a
retainer to prevent rattle during whirlpool agita­tion.

GUIDE SPECIFICATIONS

Provide Whitehall Stationary Whirlpool (specify
model number and options) with a 105-gallon
capacity, 48”L x 24”W x 28”D. Whirlpool shall be fab­ricated from heavy gauge, type 304 stainless steel.
Construction shall be seamless welded and exposed
surfaces shall be polished to satin finish. Tank shall
have a reinforced rim and shall be fitted with a
stainless steel skirt flush to the floor line. Bottom of
tank shall be a seamless, rounded coved design to
minimize bacteria build up. Provide a 2” combina­tion drain and overflow, and a filler spout. Provide a
turbine assembly with raising and lowering device
which functions both as agitator and emptying
device, permits adjustment of desired height, direc­tion of water agitation, and can be locked into place.
Turbine assembly shall be UL listed 1/2 HP jet pump
motor with automatic thermal overload protector,
and lifetime-sealed bearings. Provide a 3” dial
thermometer with a stem retainer to prevent rattle
when whirlpool is in operation.

Whitehall Mfg. > P.O. Box 3527 > City of Industry, CA 91744 > [phone] > [phone] > FAX [phone]

H-105-S

Last Update: 9/15/09

Hi-Boy Whirlpools

ELECTRIC REQUIREMENTS:

Amps: 8
Volts: 115
Hertz: 60
GFI Receptacle

MODEL NUMBER AND OPTION SELECTIONS

Series

m -H Hi-Boy Series

Capacity

m -105 Gallons

Type

m -S Stationary Whirlpool

Suffix Options (See Whirlpool Option Section for Details)

m -AHC1 Adjustable High Chair with Casters
m -AHC2 Adjustable High Chair with Rubber Tips
m -ARS Arm Rest Support
m -AS2 Adjustable Suspension Seat

 m -CTS2 Combination Table with Seats

m -EG Enviro Glaze Color Powder Coating -

Specify Color:________________________

(Special Finish Consult Factory)

 m -GFI Ground Fault Interrupter
 m -MXT1 Thermostatic Mixing Valve (15 G.P.M.)
 m -MXT2 Thermostatic Mixing Valve (25 G.P.M.)
 m -MXWH Washout Hose Attachment for MXT Valves
 m -PCS Pump Cover Strainer
 m -PHS2 Patient Handling System (Chair Type)
 m -RHG Rubber Hand Grips
 m -SDO Separate Drain and Overflow Assembly
 m -TTS2 Tank Top Seat

m -WLS Water Level Sensor

Turbine Assembly

Electrical on standard turbine supplied is 115 V 60 Hz
if 220 V is required please specify:

m 50 Hz m 60 Hz

All dimension figures in parentheses are in millimeters.

All dimensions are nominal and
subject to manufacturer’s change
without notice. Whitehall assumes
no responsibility for use of void or
suspended data. © 2008 Whitehall
Manufacturing, A Division of Acorn
Engineering Company. Please visit
www.whitehallmfg.com for most
current specifications.

Whitehall Mfg. > P.O. Box 3527 > City of Industry, CA 91744 > [phone] > [phone] > FAX [phone]

SELECTION SUMMARY & APPROVAL FOR MANUFACTURING

Model Number & Options_____________________________________________________________ Quantity_____________

Company___________________________________________________________________ Date_________________________

Contact_______________________________________________________ Title_______________________________________

Approval for Manufacturing/Signature_______________________________________________________________________

H-105-S

Last Update: 9/15/09