Whitehall Manufacturing F-300-S User Manual

F Series

300 Gallon

Stationary Full

Body Immersion Tank

F-300-S

Product photo/image above may show some available options

Full Body Immersion Tanks

Use

Whitehall Model F-300-S Full Body Immersion
Tank is recommended for debridement of

burn patients and others requiring carefully
controlled water temperature and/or total immer­sion hydrotherapy.

Tank Capacity is 300 gallons.

Whirlpool Tank is 89”L x 50”W x 22”D and

is seamless welded construction, fabricated from
heavy gauge, type 304 stainless steel, polished to a
satin inish. Tank bottom is a rounded covered design
to minimize bacteria buildup with a reinforced stain­less steel base supported by adjustable stainless
steel legs. Tank fittings are two 1-1/4” OD over­flows, one 1-1/4” NPT filler spout, one lever oper­ated quick open/close drain valve and an adjustable
head rest.

Turbine Raising and Lowering Device permits
adjustment of desired height and direction of
water agitation towards the area of the body to be
treated. It is spring balanced and provided with a
locking device.

Twin Turbine Assembly functions both as agi­tator and emptying device. It is equipped with
Underwriters Laboratory listed 1/2 HP jet pump
motor protected with an ABS plastic shell, and
automatic thermal overload protector, and lifetime-

sealed bearings. All parts contacting the water are
stainless steel, chrome plated brass or bronze.

Thermometer is provided with a dual scale, adjust­able calibration, and a stem inserts into a retainer
to prevent rattle during whirlpool agitation.

GUIDE SPECIFICATIONS

Provide Whitehall Stationary Full Body Immersion
Tank (specify model number and options) with a
300-gallon capacity, 89”L x 50”W x 22”D. Whirlpool
shall be fabricated from heavy gauge, type 304
stainless steel. Construction shall be seamless
welded and exposed surfaces shall be polished
to satin finish. Tank bottom shall be a seamless
rounded coved design to minimize bacteria buildup
and shall be reinforced with a stainless steel base
supported by stainless steel legs which are adjust­able. Provide a turbine assembly with raising and
lowering device which functions both as agita­tor and emptying device, permits adjustment of
desired height, direction of water agitation, and
can be locked into place. Turbine assembly shall
be UL listed 1/2 HP jet pump motor with auto­matic thermal overload protector, and lifetime­sealed bearings. Provide a thermometer with a
stem retainer to prevent rattle when whirlpool is
in operation. An adjustable head rest assembly is
also provided.

Member of
U.S. Green
Building Council

Whitehall Mfg. > P.O. Box 3527 > City of Industry, CA 91744 > [phone] > [phone] > FAX [phone]

Recycleable
Product

F-300-S

Last Update: 9/15/09

Series

m -F Full Body Immersion Tank

Capacity

m -300 Gallons

Type

m -S Stationary

Suffix Options (See Whirlpool Option Section for Details)

m -AEH Attachment for Electric Hoist
m -AMF Adjustable Mounting Fixture
m -BH Body Hammock
m -BHS Body Hoist Sling
m -BSS Body Support Stretcher
m -ECR Electric Cord Reel with 25’ Cord
m -GFI Ground Fault Interrupter

Full Body Immersion Tanks

MODEL NUMBER AND OPTION SELECTIONS

m -MXT3 Thermostatic Mixing Valve (45 G.P.M.
m -MXT4 Thermostatic Mixing Valve (80 G.P.M.)
m -MXT5 Thermostatic Mixing Valve (125 G.P.M.)
m -MXWH Washout Hose Attachment
m -OEH1 Overhead Electric Hoist (115V 60Hz)
m -OEH2 Overhead Electric Hoist (220V 50Hz)
m -OEH3 Overhead Electric Hoist (220V 60Hz)
m -PCS Pump Cover Strainer
m -PHS1 Patient Handling System (Stretcher Type)
m -PHS2 Patient Handling System (Chair Type)
m -RC Recessed Stainless Steel Cabinet
m -WMB Wall Mounting Brackets

Turbine Assembly

Electrical on standard turbine supplied is 115 V 60 Hz
if 220 V is required please specify:

m 50 Hz m 60 Hz

All dimension figures in parentheses are in millimeters.

All dimensions are nominal and
subject to manufacturer’s change
without notice. Whitehall assumes
no responsibility for use of void or
suspended data. © 2008 Whitehall
Manufacturing, A Division of Acorn
Engineering Company. Please visit
www.whitehallmfg.com for most
current specifications.

ELECTRIC REQUIREMENTS:

Amps: 8
Volts: 115
Hertz: 60
GFI Receptacle

SELECTION SUMMARY & APPROVAL FOR MANUFACTURING

Model Number & Options_____________________________________________________________ Quantity_____________

Company___________________________________________________________________ Date_________________________

Contact_______________________________________________________ Title_______________________________________

Approval for Manufacturing/Signature_______________________________________________________________________

Whitehall Mfg. > P.O. Box 3527 > City of Industry, CA 91744 > [phone] > [phone] > FAX [phone]

F-300-S

Last Update: 9/15/09