Whitehall Manufacturing F-260-S User Manual

F Series

260 Gallon

Stationary Full

Body Immersion Tank

F-260-S

Product photo/image above may show some available options

Full Body Immersion Tanks

Use

Whitehall Model F-260 Full Body Immersion
Tank is recommended for debridement of burn

patients and others requiring carefully controlled
water temperature and/or total immersion hydro­therapy.

Tank Capacity is 260 gallons.

Whirlpool Tank is 95”L x 41”W x 22”D and is

seamless welded construction, fabricated from heavy
gauge, type 304 stainless steel, polished to a satin
finish. Tank bottom is a rounded covered design to
minimize bacteria buildup with a reinforced stainless
steel base supported by adjustable stainless steel
legs. Tank fittings are two 1-1/4” OD overflows, one
1-1/4” NPT filler spout, one lever operated quick
open/close drain valve and an adjustable head rest.

Turbine Raising and Lowering Device permits
adjustment of desired height and direction of
water agitation towards the area of the body to be
treated. It is spring balanced and provided with a
locking device.

Turbine Assembly functions both as agitator and
emptying device. It is equipped with Underwriters
Laboratory listed 1/2 HP jet pump motor protected
with an ABS plastic shell, and automatic thermal
overload protector, and lifetime-sealed bearings.
All parts contacting the water are stainless steel,

chrome plated brass or bronze.

Thermometer is provided with a dual scale, adjust­able calibration, and a stem inserts into a retainer
to prevent rattle during whirlpool agitation.

GUIDE SPECIFICATIONS

Provide Whitehall Stationary Full Body Immersion
Tank (specify model number and options) with a
260-gallon capacity, 95”L x 41”W x 22”D.
Whirlpool shall be fabricated from heavy gauge,
type 304 stainless steel. Construction shall be
seamless welded and exposed surfaces shall
be polished to satin finish. Tank bottom shall
be a seamless rounded coved design to mini­mize bacteria buildup and shall be reinforced
with a stainless steel base supported by stain­less steel legs which are adjustable. Provide a
turbine assembly with raising and lowering device
which functions both as agitator and emptying
device, permits adjustment of desired height, direc­tion of water agitation, and can be locked into
place. Turbine assembly shall be UL listed 1/2 HP
jet pump motor with automatic thermal overload
protector, and lifetime-sealed bearings. Provide a
thermometer with a stem retainer to prevent rattle
when whirlpool is in operation. An adjustable head
rest assembly is also provided.

Member of
U.S. Green
Building Council

Whitehall Mfg. > P.O. Box 3527 > City of Industry, CA 91744 > [phone] > [phone] > FAX [phone]

Recycleable
Product

F-260-S

Last Update: 9/15/09

Full Body Immersion Tanks

MODEL NUMBER AND OPTION SELECTIONS

Series

m -F Full Body Immersion Tank

Capacity

m -260 Gallons

Type

m -S Stationary

Suffix Options (See Whirlpool Option Section for Details)

m -AEH Attachment for Electric Hoist
m -AMF Adjustable Mounting Fixture
m -BH Body Hammock
m -BHS Body Hoist Sling
m -BSS Body Support Stretcher
m -ECR Electric Cord Reel with 25’ Cord
m -GFI Ground Fault Interrupter

m -MXT3 Thermostatic Mixing Valve (45 G.P.M.)
m -MXT4 Thermostatic Mixing Valve (80 G.P.M.)
m -MXT5 Thermostatic Mixing Valve (125 G.P.M.)
m -MXWH Washout Hose Attachment
m -OEH1 Overhead Electric Hoist (115V 60Hz)
m -OEH2 Overhead Electric Hoist (220V 50Hz)
m -OEH3 Overhead Electric Hoist (220V 60Hz)
m -PCS Pump Cover Strainer
m -PHS1 Patient Handling System (Stretcher Type)
m -PHS2 Patient Handling System (Chair Type)
m -RC Recessed Stainless Steel Cabinet
m -WMB Wall Mounting Brackets

Turbine Assembly

Electrical on standard turbine supplied is 115 V 60 Hz
if 220 V is required please specify:

m 50 Hz m 60 Hz

All dimension figures in parentheses are in millimeters.

ELECTRIC REQUIREMENTS:

Amps: 8
Volts: 115
Hertz: 60
GFI Receptacle

All dimensions are nominal and
subject to manufacturer’s change
without notice. Whitehall assumes
no responsibility for use of void or
suspended data. © 2008 Whitehall
Manufacturing, A Division of Acorn
Engineering Company. Please visit
www.whitehallmfg.com for most
current specifications.

Whitehall Mfg. > P.O. Box 3527 > City of Industry, CA 91744 > [phone] > [phone] > FAX [phone]

SELECTION SUMMARY & APPROVAL FOR MANUFACTURING

Model Number & Options_____________________________________________________________ Quantity_____________

Company___________________________________________________________________ Date_________________________

Contact_______________________________________________________ Title_______________________________________

Approval for Manufacturing/Signature_______________________________________________________________________

F-260-S

Last Update: 9/15/09