Whitehall Manufacturing E-27-M User Manual

E Series

27 Gallon

Mobile Whirlpool

E-27-M

Product photo/image above may show some available options

Extremity Whirlpools

Use

Whitehall E-27-M Mobile Whirlpools is
recommended for treatment of the upper extremi­ties and the lower leg below the knee.

Tank Capacity is 27 gallons.

Whirlpool Tank is 28”L x 15”W x 21”D and is

seamless welded construction, fabricated from heavy
gauge, type 304 stainless steel, polished to a satin
finish. Tank rim is reinforced with a concealed stain­less steel rod. Tank bottom is a seamless, rounded
covered design to minimize bacteria buildup.

Heavy Duty Swivel Casters support all mobile
models. Rear pair of casters are lockable for
stabilizing whirlpool during treatment.

Turbine Raising and Lowering Device permits
adjustment of desired height and direction of
water agitation towards the area of the body to be
treated. It is spring balanced and provided with a
locking device.

Turbine Assembly functions both as agitator and
emptying device. It is equipped with Underwriters
Laboratory listed 1/2 HP jet pump motor protected with
an ABS plastic shell, and automatic thermal overload
protector, and lifetime-sealed bearings. All parts
contacting the water are stainless
steel, chrome plated brass or bronze.

Member of
U.S. Green
Building Council

Recycleable
Product

Drain options auxiliary drain valve on the bottom of
the unit. The E-27-M-SDP has a bottom drain, leading
to a separate, concealed water evacation pump. A hose
is attached to the side of the unit to facilitate the evacu­ation. The E-27-M-DS is constructed with an integral
sump which reduces residual water and eliminates the
need for a drain.

Thermometer is provided with a dual scale,
adjustable calibration, and a stem inserts into a
retainer to prevent rattle during whirlpool agita­tion.

GUIDE SPECIFICATIONS

Provide Whitehall Mobile Whirlpool (specify model
number and options) with a 27-gallon capacity,
28”L x 15”W x 21”D. Whirlpool shall be fabri­cated from heavy gauge, type 304 stainless steel.
Construction shall be seamless welded and exposed
surfaces shall be polished to satin finish. Tank shall
have a reinforced rim. Bottom of tank shall be a
seamless, rounded coved design to minimize bacte­ria build up. Whirlpool shall have heavy duty swivel
casters with locking device on rear pair of casters.
Provide a turbine assembly with raising and lowering
device which functions both as agitator and empty­ing device, permits adjustment of desired height,
direction of water agitation, and can be locked into
place. Turbine assembly shall be UL listed 1/2 HP
jet pump motor with automatic thermal overload
protector, and lifetime-sealed bearings. Provide a
thermometer with a stem retainer to prevent rattle
when whirlpool is in operation.

Whitehall Mfg. > P.O. Box 3527 > City of Industry, CA 91744 > [phone] > [phone] > FAX [phone]

E-27-M

Last Update: 9/15/09

Series

E-27-M

Standard

mobile

whirlpool

28”

(710)

15”

(380)

Stainless steel tank

1/2 hp jet pump motor

Variable pressure control

Thermometer

Turbine
raising
& lowering
device

Auxiliary drain valve

21”

(535)

27”

(685)

tank

floor

bottom

ELECTRIC REQUIREMENTS:

Amps: 8
Volts: 115
Hertz: 60
GFI Receptacle

Top view

shows

drain hose

E-27-M-SDP

Mobile whirlpool with
separate drain pump

Mobile whirlpool

with sump

E-27-M-DS

Sump

m -E Extremity Series

Capacity

m -27 Gallons

Type

m -DS Mobile Whirlpool with Sump
m -M Mobile Whirlpool
m -SDP Mobile Whirlpool with Seperate Drain Pump

Suffix Options (See Whirlpool Option Section for Details)

m -ADH Auxiliary Drain Hose Assembly
m -AHC1 Adjustable High Chair with Casters
m -AHC2 Adjustable High Chair with Rubber Grips
m -ALC Adjustable Low Chair

Extremity Whirlpools

m -ALS Adjustable Low Stool
m -ARS Arm Rest Support

MODEL NUMBER AND OPTION SELECTIONS

m -EG Enviro Glaze Color Powder Coating ­ Specify Color:________________________

(Special Finish Consult Factory)

m -GFI Ground Fault Interrupter
m -PCS Pump Cover Strainer
m -WLS Water Level Sensor

Turbine Assembly

Electrical on standard turbine supplied is 115 V 60 Hz
if 220 V is required please specify:

m 50 Hz m 60 Hz

All dimension figures in parentheses are in millimeters.

All dimensions are nominal and
subject to manufacturer’s change
without notice. Whitehall assumes
no responsibility for use of void or
suspended data. © 2008 Whitehall
Manufacturing, A Division of Acorn
Engineering Company. Please visit
www.whitehallmfg.com for most
current specifications.

Whitehall Mfg. > P.O. Box 3527 > City of Industry, CA 91744 > [phone] > [phone] > FAX [phone]

SELECTION SUMMARY & APPROVAL FOR MANUFACTURING

Model Number & Options_____________________________________________________________ Quantity_____________

Company___________________________________________________________________ Date_________________________

Contact_______________________________________________________ Title_______________________________________

Approval for Manufacturing/Signature_______________________________________________________________________

E-27-M

Last Update: 9/15/09