Whitehall Manufacturing 4101 User Manual

Whitehall

Surgical Scrub Sinks

Surgical Scrub sink

One Station

Model 4101

Please visit www.whitehallmfg.com

for most current specifications.

Surgical Scrub Sink is designed for use in health GUIDE SPECIFICATION
care institutions providing surgeons with a
convenient sink for pre-op scrub up.

Fixture is fabricated from heavy gage, type 304 Fixture shall be fabricated from heavy gage, type
stainless steel and is seamless welded construction 304 stainless steel, with seamless welded
polished to a satin finish. The cabinet interior is construction polished to a satin finish. Cabinet
sound-deadened with a fire-resistant material. The interior shall have a sound-deadening, fire­unit is designed to be installed on the wall using a resistant material. Cabinet shall also have
mounting carrier or it can be floor mounted on a removable panels to allow access to water control
stainless steel pedestal base. valve, waste connection, stops and strainer. Sink

Scrub Sink is provided with front panels which are
easily removed for access to the water control valve
and waste connection. Scrub sink has a sloping
bottom surface to minimize splashing and a 1-1/2”
OD tailpiece with a 3” flat strainer drain.

Backsplash has a gooseneck assembly with a 1­1/2” spray head that can be removed for
sterilization.

T/P Temperature/Pressure Balancing Mixing
Valve Control is located on the control panel and

maintains a constant water temperature with a flow
control of 2.5 GPM. This easily adjustable, anti-scald
valve will automatically shut off if the hot or cold
water supply fails.

Water Supply Valve is a mechanical pilot type,
actuated by one push of a knee-operated front panel
and turned off by a second push.

Fixture May Show Some Available Options

Provide Whitehall One Station Surgical Scrub Sink
(specify model number and options) 32” wide.

shall have a sloping bottom to minimize splashing,
and a 3” flat strainer drain. Gooseneck shall have a
removable 1-1/2” spray head. Fixture shall have a
T/P temperature/pressure balancing mixing valve
which is easily adjustable at the control panel.
Manufacturer shall provide necessary installation
instructions.

4101-LFN-PDM

Please visit www.whitehallmfg.com
for most current specifications.

Whitehall Mfg. > P.O. Box 3527 > City of Industry, CA 91744 > [phone] > [phone] > Fax [phone]

Member of
U.S. Green
Building
Council

Recyclable
Product

4101

Complies

with the

following

standards:

®

Last Update: 05/31/13

Surgical Scrub Sinks

SELECTION SERIES

q

-4101 Surgical Scrub Sink (1 Station)

MOUNTING

q -MC Mounting Carrier (Off-Floor Installation)
q -PB Pedestal Base (On-Floor Installation)

Please visit www.whitehallmfg.com

for most current specifications.

4

2

5

14

8

(371)

"

27"

(686)

Product Options

q

-DTD Digital Time Display

q -ETC Electronic Timing Controller
q -EYW Eyewash
q -HTR Chronomite Instantaneous Water Heater

(Refer to Chronomite Labs at
http://chronomite.com for applications and sales
assistance, supplied by Chronomite for field
installation)

q -LFN Laminar Flow Nozzle
q -LM Light Module
q -PDM Metering Liquid Soap Dispenser
q -SFS Soap Flush System
q -SO Sensor Operated
q -SS Storage Shelf
q -SWV Swivel Nozzle on Gooseneck

32"

(813)

6

5

1

3

3

35

"

4

(908)

3

51

4

(1314)

"

24"

(610)

40"

(1016)

MODEL# 4101-EYW-LFN-PDM

NOTES:

1. Gooseneck Spout Assembly

2. Flat Strainer Drain.

3. Optional -PDM Soap Dispenser.

SELECTION SUMMARY & APPROVAL FOR MANUFACTURING

All dimensions are nominal and subject to
manufacturer's change without notice. Whitehall
assumes no responsibility fo use of void or
suspended data © Whitehall Manufacturing,

Member of Morris Group International.
Please visit www.whitehallmfg.com for most
current specifications.

Whitehall Mfg. > P.O. Box 3527 > City of Industry, CA 91744 > [phone] > [phone] > Fax [phone]

SELECTION SUMMARY & APPROVAL FOR MANUFACTURING

Model Number & Options______________________________________________Quantity___________

Model Number & Options______________________________________________Quantity___________
Company_________________________________________________________Date_______________

Company_________________________________________________________Date_______________
Contact_____________________________________Title_____________________________________

Contact_____________________________________Title_____________________________________

Approval for Manufacturing/Signature_____________________________________________________

Approval for Manufacturing/Signature_____________________________________________________

4. Control Panel.

5. T/P Mixing Valve.

6. Optional -EYW Eyewash

4101

Last Update: 05/31/13