Whitehall Manufacturing 4025 User Manual
Whitehall
Care-Ware
®
Bedside Patient
Care Units
Built-In Swivette™
Includes Models
4020, 4022, 4025
4020-L
Fixture May Show Some Available Options
Cabinet exterior surfaces are high pressure GUIDE SPECIFICATION
laminate. Interior surfaces are stain-resistant
melamine laminate and stainless steel. Interior has
a removable stainless steel floor to conceal frame
anchors. Specify cabinet color selection.
Toilet is stainless steel, siphon jet type with white
plastic seat and self-sustaining check hinge. Door
linkage swivels the toilet into the room when
cabinet door is opened. The toilet is locked in place
when open and must be unlatched to close. Toilet
operates with a 1.6 GPF flush valve.
Hydraulic Flush Valve is furnished with a 1-3/4"
dia m e t er, hyd r a u lica l l y ac t uate d , r e m ote
pushbutton. Minimum required flow pressure is 25
PSI with a minimum water consumption of 1.28
GPF.
Swivel Assembly is cast iron with a sanitary
white Enviro-Glaze finish, and has a positive
watert ight, ch emica l-re sista nt seal. Sw ivel
assembly requires floor anchoring by others.
Toilets will withstand a 2,500 pound static vertical
load.
Floor Anchors are seismic rated for CBC category
IV structures.
Provide and install Whitehall Swivette™ (specify
model number and options). Cabinet frame shall
be heliarc welded, type 304 stainless steel, and
shall not require wall support. Cabinet doors and
panels shall be high pressure laminate. Door on
toilet side shall be linked to toilet, so that when
door is opened or closed, the toilet will swivel
accordingly. Door on the opposite side shall be
provided with a toilet paper holder. Doors shall
support a 250 pound static, vertical load. Front
panels shall hinge open for access to valves and
piping. Bedpan storage cupboard shall be provided
above the toilet. Cabinet shall provide front toe
space. P-trap shall be furnished. Toilet shall be
stainless steel, elongated, siphon jet type, and
shall flush in any position along the arc of
movement. Trap shall pass a 2-1/8" ball. Toilet
shall withstand loadings of 2,500 pounds without
permanent damage. Toilet seat shall have selfsustaining check hinge. Toilet to flush with a 1.6
GPF flush valve.
Please visit www.whitehallmfg.com
for most current specifications.
Whitehall Mfg. > P.O. Box 3527 > City of Industry, CA 91744 > (800) 782-7706 > (626) 968-6681 > Fax (626) 855-4862
Member of
U.S. Green
Building
Council
Recyclable
Product
Water
Conserving
Product
4020
Complies
with the
following
standards:
Last Update: 09/25/13
Care-Ware
®
Bedside Patient
Care Units
MODEL NUMBER AND OPTIONS SELECTION
BASE MODEL NUMBER (Must Specify)
q 4020 Swivette™, Built-In, Back Wall Waste Outlet
q 4022 Swivette™, Built-In, Side Wall Waste Outlet
q
4025 Swivette™, Built-In, Floor Waste Outlet
Note: Side wall outlet is only available on the toilet side
of fixture.
TOILET ORIENTATION (Must Specify)
q
-L Left Hand Toilet
q
-R Right Hand Toilet
Notes: L (left) or R (right) indicates toilet location in opened
position when facing the fixture. Lavatory is always located on side
opposite the toilet.
FLUSH VALVE SELECTION
q
-HET - 1.28 GPF
q
-ULF - 1.6 GPF
q
-3.5 GPF
COLOR SELECTION (Must Specify)
Cabinet ________________________
PRODUCT OPTIONS (Must Specify)
q -BL Bedpan Lugs
q -BW Bedpan Washer (Built-In)
q -DB1 Hemo-Dialysis Box, Singe Valve
q -DB2 Hemo-Dialysis Box, Dual Valve
q -EG Enviro-Glaze:
q Lavy
q Toilet Exterior Only
q Toilet Interior & Exterior
q Cabinet Interior
Specify Color: __________
q -EP Exposed Paper Holder
q -FCI Infectious Control Flush with Exposed Paper
Holder
q -MT Metal Template
q -OCP Optional Color Plastic Panels
Specify Color:__________
q -SS Storage Shelf
NOTES:
1. Flush Valve Pushbutton
2. Stainless Steel Toilet
3. Storage Compartment
4. Toilet Tissue Holder
4
38"
(965)
3
2
MODEL# 4020/4022/4025-L
1
34
(879)
1
19
"
2
(495)
5
"
8
3
17
"
4
(451)
35"
1
16
2
(419)
"
(889)
SELECTION SUMMARY & APPROVAL FOR MANUFACTURING
All dimensions are nominal and subject to
manufacturer's change without notice. Whitehall
assumes no responsibility fo use of void or
suspended data © Whitehall Manufacturing,
Member of Morris Group International.
Please visit www.whitehallmfg.com for most
current specifications.
Whitehall Mfg. > P.O. Box 3527 > City of Industry, CA 91744 > (800) 782-7706 > (626) 968-6681 > Fax (626) 855-4862
SELECTION SUMMARY & APPROVAL FOR MANUFACTURING
Model Number & Options______________________________________________Quantity___________
Model Number & Options______________________________________________Quantity___________
Company_________________________________________________________Date_______________
Company_________________________________________________________Date_______________
Contact_____________________________________Title_____________________________________
Contact_____________________________________Title_____________________________________
Approval for Manufacturing/Signature_____________________________________________________
Approval for Manufacturing/Signature_____________________________________________________
4020
Last Update: 09/25/13
Loading...