Whitehall Manufacturing 3775 User Manual
Whitehall
Best-Care™
Healthcare and Ligature
Resistant Products
Ligature Resistant
Corterra™ Basin
ADA Compliant
Model 3775
Ligature Resistant Corterra™ Basin
Ligature Resistant Corterra™ Basin is
engineered to combine the look and feel of
commercial grade designer basins and countertops
with durability and economy in mind. Each
standard height Washbasin complies with ANSI,
UFAS, and ADA requirements. Compliance is
subject to the interpretation and requirements of
the local code authority.
Countertop and Basin are constructed of
Corterra™ recycled solid surface polymer resin
and conform with ANSI Z124.3 and ANSI Z124.6
and is ICPA SS-1 approved. Corterra uses a
minimum of 15% post-consumer recycled material
and a minimum 5% rapidly renewable material
derived from biobased sources. Color furnished is
Blanco(White). Basin includes suicide resistant side
splashes, overflow, grid strainer, waste piping and
1-1/2” P-Trap.
Optional Valve is a pneumatically operated,
pushbutton Air-Control valve using atmospheric air.
Pushbuttons are vandal-resistant and require less
than 5 pounds of force to activate valve. Valve is
metering, non-hold open type. Valve timing range
is adjustable from 5-60 seconds. Valve includes a
0.5 GPM flow control and can be remotely located
up to 10 feet from the operating pushbutton. Valve
and bubbler conforms with lead free requirements
of NSF61, Section 9, 1997 and CHSC 116875.
3775-3374
Fixture May Show Some Available Options
Optional Mixing Valve delivers tempered water
flow by compensating for pressure and
temperature fluctuations and is ASSE 1070
compliant. Valve is to be field set to 105º
Fahrenheit and includes strainers and integral
checks. Operating range is 30 to 100PSI.
Enclosure Conceals valve assembly and P-trap
with 18 gage, type 304 stainless steel, powder
coated white
GUIDE SPECIFICATION
Ligature Resistant Corterra™ Washbasin. Unit with
34" standard rim height to conform with ANSI,
UFAS and ADA Accessibility Standards. Provide
integral “D” Shaped basin with an integral, rear
overflow. Basin, countertop, backsplash and
sidesplash to be constructed of Corterra™ recycled
solid surface polymer resin. Washbasin shall
conform to ANSI Z124.3 and ANSI Z124.6. Trap
enclosure to be constructed of heavy gage, type
304 stainless steel and powder coated white.
Washbasin to be furnished complete with the
following: hemispherical pushbutton(s), conical
sprayhead, 1-1/2" p-trap, and air-control metering
valve.
Please visit www.whitehallmfg.com
for most current specifications.
Whitehall Mfg. > P.O. Box 3527 > City of Industry, CA 91744 > (800) 782-7706 > (626) 968-6681 > Fax (626) 855-4862
Member of
U.S. Green
Building
Council
Recyclable
Product
Water
Conserving
Product
Complies
with the
following
standards:
3775
Federal
Public Law
111-380
(No Lead)
Last Update: 01/08/14
Best-Care™
Healthcare and Ligature
Resistant Products
MODEL NUMBER AND OPTIONS SELECTION:
BASE MODEL NUMBER
o 3775 Ligature Resistant Corterra™ Washbasin
VALVE SELECTION (Must Specify)
o -3373 Air-Control, Single Temp, Metering w/
Conical Sprayhead & Pushbuttons
o -3374 Air-Control, H & C, Metering w/
Conical Sprayhead & Pushbuttons
o -9 Punched for Valve by Others
(-H34 Three 1-5/16” Diameter Holes
4” Centerset)
4
2
21
(552)
1
PRODUCT OPTIONS (Must Specify)
o -MXTP Temperature-Pressure Balancing Mixing Valve
(ASSE 1070 Compliant)
o -OCC Optional Corterra™ Color - Specify: _______
ADDITIONAL VALVES
See Individual Spec Sheets: 3373, 3373-PZ, 3374
& 3374-PZ
NOTES:
1. Conical Sprayhead
2. Hemispherical Pushbutton
3. D-Shaped Bowl
3
"
4
4. Back/Side Splash
5. Ligature Resistant Bottom Enclosure
6. Tamper Resistant Screws
7. Wall Anchoring Hardware
(By Others)
3
20"
(508)
4"
3"
(76)
(102)
7
1
25
"
4
(641)
5
34"
6
(864)
1
16
"
4
(413)
MODEL# 3775-3774
SELECTION SUMMARY & APPROVAL FOR MANUFACTURING
All dimensions are nominal and subject to
manufacturer's change without notice. Whitehall
assumes no responsibility fo use of void or
superseded data © Whitehall Manufacturing,
Member of Morris Group International.
Please visit www.whitehallmfg.com for most
current specifications.
Whitehall Mfg. > P.O. Box 3527 > City of Industry, CA 91744 > (800) 782-7706 > (626) 968-6681 > Fax (626) 855-4862
SELECTION SUMMARY & APPROVAL FOR MANUFACTURING
Model Number & Options______________________________________________Quantity___________
Model Number & Options______________________________________________Quantity___________
Company_________________________________________________________Date_______________
Company_________________________________________________________Date_______________
Contact_____________________________________Title_____________________________________
Contact_____________________________________Title_____________________________________
Approval for Manufacturing/Signature_____________________________________________________
Approval for Manufacturing/Signature_____________________________________________________
3775
Last Update: 01/08/14
Loading...