White FR-2000C, FR-1800 User Manual
Specifications and Main Features
- Model: Onan/Briggs & Stratton-engine powered machines FR-2000C and FR-1800
- Type of Engine: The engine installed is Air cooled 2 Cylinder Gas engine
- Horsepower:
- FR-1800: These machines are capable of producing 18 HP
- FR-2000C: The four machines can produce a horsepower of 20 HP
- Displacement:
- FR-1800: The engine type has a rotational volume of 42.8 Cu. In which is approximately equal to 694cc
- FR-2000C: This engine type has a rotational volume of 47 Cu. In, and it is also equal to 770cc
- Intermediate Transmission: FR-1800 comprises of Eaton 720, whilst FR-2000C is equipped with Sundstrand BDU-10L.
- Displacement: Rotational Volume for FR-1800 is 42.8 Cu In which is equal to 694 C, and for FR 2000C is 47 Cu In equal to 770 C
- Power: Peak Power output for FR 1800 gets delivered at a Drive Speed of 20 HP otherwise is at 18 HP
- Fuel Tank Volume and Capacity: FR 2000C is credited with a Tank capacity of 5 G while FR 1800 has a Drive Speed of 20
- Driving and Steering: Drive Speed: 0-7.5 MPH, maneuvering radius equal to 0 , Onan/Briggs is the engine powering it
- Weight Attributes: Weight while shipping for FR 2000C rests at 876 lb while FR 1800 gets 660 lb
- Available Attachments: Among the multi tasking riding machines – multi speed decks boasting 42 inches, 52 inches and 62 inches are also present
- Lift deck manually or hydraulically
- Electric elevators available on request
- Hinge at back of the deck
- Interlock safety measures
- Hour and amperes monitor
- Twin lamps at front of the machine
- 20.4 kg for the rear frame
Frequently Asked Questions
- Q: What’s the horsepower of the FR-1800 model?
A: The FR-1800 model is 18 HP.
- Q: What’s the fuel tank capacity for these tractors?
A: The fuel tank capacity is 19 liters.
- Q: How do I crank the engine?
A: Only turn the key on once your steering levers are in a locked neutral position with the PTO switch turned off.
- Q: What’s the engine mounted on the FR-2000C?
A: The Onan air cooled features a 2 piston gas engine that the FR-2000C uses.
- Q: What’s the couples per minute for the engine?
A: The couple per minute for the engine is 3450.
- Q: What’s the procedure when engaging the electric clutch?
A: Set the throttle of the ignition to a third before pulling out and up along the shaft drive mode switch to engage the electric clutch.
- Q: What’s the Wight of the FR-2000C model?
A: The Wightly 876 lbs is set as default in the FR-2000C model for shipping.
- Q: Is it possible for me to add a dual tail wheel kit to my machinery?
A: A dual tail wheel kit can be fitted but only if the machine does not already have a tail weight fitted on it, otherwise, the dual tail wheel kit can be fitted on it.
- Q: In case my tractor moves even when the steering lever is placed in neutral, what do I need to do?
A: Should the tractor begin to creep it would be prudent to check the steering cables as they may need to be adjusted to ensure they are in the right orientation.
- Q: What is the ideal time frame for me to check if my tire pressure levels are stable?
A: Ideally speaking, If your car's tires look low, or every 100 hours of work have elapsed.
User Manual
Loading...