Whistler D13VR Owner's Manual
OWNER’S MANUAL
DVR Camera
D13VR
WHAT’S INCLUDED
2
D13VR
USB CABLEDC POWER
CORD
OWNER’S
MANUAL
Welcome
Thank you for choosing a Whistler product. We are dedicated
to providing products that represent both quality and value.
Please read the user manual carefully before using this product.
If you have additional questions, please visit the FAQ page
on our website at www.whistlergroup.com or call toll free
800-531-0004, 8am to 5pm CT, Monday through Friday to
speak to a Customer Service Representative.
WINDSHIELD
BRACKET
Features
FEATURE DESCRIPTION
3
1
7
15
8
9
10
11
12
3 4 5 6
14
13
2
1. Camera Lens
2. Speaker
3. MENU Button
4. Up Button
5. Down/Mute
Button
6. OK/Record
Button
7. LCD Display
8. USB Jack
9. HDMI Port
10. Reset Button
11. Power Button
12. MicroSD Card Slot
13. Bracket Mount
14. Microphone
15. Status LED
FEATURE DESCRIPTION
4
OPERATIONS
5
Operations
Inserting a microSD Card
Before initial use, insert a microSD card. (Suggest at least a
4GB card High Capacity, up to 32GB)
Charging the Unit
Fully charge DVR for initial use by:
• 12 volt Car charger
• PC USB port
The status LED is red during charging.
NOTE: Turn DVR o before inserting or removing the
microSD card.
Button and Function
1. Camera Lens – 170 wide-angle lens.
2. Speaker – Provides audio for playback and device tones.
3. MENU Button – Press button to display menu settings.
Press and hold to switch modes: Video, Camera, Play back.
4. UP Button – Press UP to zoom in. In Menu allows
scrolling of menu items.
5. Down/Mute Button - Press DOWN to zoom out. In
Menu, allows scrolling of menu items. When zoomed
out, mutes audio.
6. OK/Record Button – Press and hold to start recording.
Press again to stop. In menu, selects highlighted items.
7. LCD Display – View photo and video.
8. USB Jack – Allows PC interface to access microSD
card, PC camera and charge the battery.
9. HDMI Port – Provides connection to a HDMI monitor.
10. Reset Button – Using a small pin, push in to reset
the device.
11. Power Button – Press to power ON/OFF.
12. MicroSD Card Slot – Slot for memory card.
13. Bracket Mount – windshield bracket attachment.
14. Microphone – Allows audio recordings.
15. Status LED – Blue = power on, Red = charging.
OPERATIONS
6
Installing the Windshield Bracket
The included windshield bracket securely places the DVR
onto the vehicle’s windshield.
Follow the procedure below to secure the bracket:
1. Slide the BRACKET into the rail on the top of the DVR.
2. If applicable, remove protective lm from the suction cup.
3. Clean the selected area of the windshield for mounting
using a quality glass cleaner.
4. Press the bracket onto the windshield. To secure the
suction cup press the locking tab toward the windshield.
5. Loosen the knob on the bracket to adjust the angle of the
DVR. Tighten knob securely to secure the DVR’s position.
OPERATIONS
7
Power Connection in Vehicle
1. Plug the USB end of the vehicle power cord into the USB
jack of the DVR.
2. Insert the other end of the power cord into the vehicle’s
lighter socket/power port.
NOTE: Unit will automatically turn on and start recording
when power is applied. It will turn o when power is removed.
Power ON/OFF
Power On: Press
to turn on DVR. Blue Status LED
illuminates.
Power O: Press and hold
until the Whistler screen
appears.
NOTE: The D13VR will automatically power OFF after the
low battery warning is displayed.
STEP 1
STEP 1
STEP 5
STEP 4
Loading...