
WHAT’S INCLUDED
2
D11VR
USB CABLEDC POWER
CORD
OWNER’S
MANUAL
Welcome
Thank you for choosing a Whistler product. We are dedicated
to providing products that represent both quality and value.
Please read the user manual carefully before using this product.
If you have additional questions, please visit the FAQ page
on our website at www.whistlergroup.com or call toll free
800-531-0004, 8am to 5pm CT, Monday through Friday to
speak to a Customer Service Representative.
WINDSHIELD
BRACKET

FEATURE DESCRIPTION
4
Button and Function
1. Camera Lens – 120 wide-angle lens.
2. LED Light - Provides light for night recordings.
3. Speaker – Provides audio for playback and device tones.
4. Power Button – Press to power on/o. When on, press
to turn on/o the LED light.
5. MENU Button – Press button to display menu settings.
6. Mode Button - Press and hold to switch modes: Video,
Camera, Play back.
7. UP Button – Press UP to zoom in. In Menu allows
scrolling of menu items.
8. OK/Record Button – Press and hold to start recording.
Press again to stop. In menu, selects highlighted items.
9. Down/Mute Button - Press DOWN to zoom out. In
Menu, allows scrolling of menu items. When zoomed
out, mutes audio.
10. LCD Display – View photo and video.
11. MicroSD Card Slot – Slot for memory card.
12. HDMI Jack – Provides connection to a HDMI monitor.
13. USB Jack – Allows PC interface to access microSD
card, PC camera and charge the battery.
14. AV Output Jack - Provides Audio and Video output to
an external monitor.

FEATURE DESCRIPTION / OPERATIONS
5
15. Bracket Mount – windshield bracket attachment.
16. Microphone – Allows audio recordings.
17. Reset Button – Using a small pin, push in to reset
the device.
18. Status LED – Blue = power on, Red = charging.
Operations
Inserting a microSD Card
Before initial use, insert a microSD card. (Suggest at least a
4GB card High Capacity, up to 32GB)
Charging the Unit
Fully charge DVR for initial use by:
• 12 volt Car charger
• PC USB port
The status LED is red during charging.
NOTE: Turn DVR o before inserting or removing the
microSD card.

OPERATIONS
6
Installing the Windshield Bracket
The included windshield bracket securely places the DVR
onto the vehicle’s windshield.
Follow the procedure below to secure the bracket:
1. Slide the BRACKET into the rail on the top of the DVR.
2. If applicable, remove protective lm from the suction cup.
3. Clean the selected area of the windshield for mounting
using a quality glass cleaner.
4. Press the bracket onto the windshield. To secure the
suction cup press the locking tab toward the windshield.
5. Loosen the knob on the bracket to adjust the angle of the
DVR. Tighten knob securely to secure the DVR’s position.
STEP 1
STEP 5
STEP 4