Whistler 695SE User Manual

OWNER’S MANUAL

XTR-

690SE/695SE

Total Band Protection

™

LASER-RADAR

DETECTOR

The Whistler Group Corporate Headquarters

3604 NW Frontage Rd. • Bentonville, AR 72712

Tel [phone] • Fax [phone]

Customer Return Center

551 N. 13th St. • Rogers, AR 72756

Customer Service Tel [phone]

www.whistlergroup.com

One or more U.S. patents may apply:

#5,146,227, #5,379,456, #5,666,120,

#5,990,821, #7,215,276

P/N 260023, ©2009 The Whistler Group, Inc.

Dear Whistler Owner,

If you have questions concerning the operation of this
Whistler pr

oduct please call:

CCuussttoommeerr SSeerrvviicce

11--880000--553311--0000004

e

4

Monday - Friday • 8:00 am - 5:00 pm CT

or visit our website

www.whistlergroup.com

Please keep the receipt in a safe place. You may
register your product online
For warranty

verification purposes, a copy of your dated

at www

..wwhhiissttlleerrggrroouupp.

.

com.

store receipt must still accompany any unit sent in for
warranty work. If the unit is returned without a dated store
receipt, an out of warranty service charge applies.
YYoouurr wwaarrrraannttyy ppeerriioodd bbeeggiinnss aatt tthhee ttiimmee oof
ppuurrcchhaassee.. TThhee wwaarrrraannttyy iiss vvaalliiddaatteedd oonnllyy bbyy tthhe
ddaatteedd ssttoorree rreecceeiipptt!!

Please record the serial number

NNoottee:

:
f

e

of the unit in the space provided in the warranty
section of the manual.

To fully acquaint yourself with the operation of your
Whistler detector and to better understand the
differences between detecting radar, laser, and
safety radar signals, we recommend reading this
entire manual or visiting our F.A.Q. page on our
website www.

wwhhiissttlleerrggrroouup

p

.com

Enjoy your Whistler detector and please drive
safely.

ely,

Sincer
The Whistler Gr

oup, Inc.

M

odel Features Summary . . . . . . . . . . . . . . . .3 - 4

I

nstallation . . . . . . . . . . . . . . . . . . . . . . . . . . .5 - 6

Mounting Guidelines

•
Windshield Mounting

•
Power Connection and Fuse Replacement

•

Operation

•

•

•

• F

• Integrated Real Voice

• A

• A

• Quiet Mode 8

• E

• B

• City/City 1/ City 2 Mode 9

• H

• Vehicle Battery Monitor 9

• Low Profile Alert Periscopes 10

• C

• B

• 7 Color Multi-band Display (XTR-695 only) 11

• Vehicle Battery Saver Mode 11

• F

• Option Select Mode - Stay Alert Feature 13

• S

• Alert Priority 15

• Compass Calibration Set-up 15

• Reset Features 16

• Intellicord

• Ka RSID 17

• LSID 17

POP™Mode Alerts . . . . . . . . . . . . . . . . . . . . . .

Laser/Radar Alerts . . . . . . . . . . . . . . . . . . . . . .18

• Speed Radar Audio/Visual Alerts 18

• Laser Audio/Visual

• Pulse Protection

Troubleshooting Guide . . . . . . . . . . . . . . . . . . .19

Care and Maintenance . . . . . . . . . . . . . . . . . . .20

Are Detectors Legal? . . . . . . . . . . . . . . . . . . . .20

FCC Information . . . . . . . . . . . . . . . . . . . . . . . .20

Speed Monitoring . . . . . . . . . . . . . . . . . . . .21 - 23

• POP™Mode 21

•

• Radar Facts 22

• Other Speed Detection Systems 22 - 23

•

Warranty Information . . . . . . . . . . . . . . . . .23 - 26

Specifications . . . . . . . . . . . . . . . . . . . . . . . . . .26

Accessories

. . . . . . . . . . . . . . . . . . . . . . . . . . .7 - 17

Power On, Self T
Teach/Tutorial Mode
Setting Saver

eatur

udio Level
uto Quiet Mode

xternal
acklit Buttons

ighway Mode

ompass Mode

acklight Setting - Dim/Dark

ilter Mode

afety W

Laser Facts

Radar Detector Detector

est

e Engaged Confirmation 7

Audio Jack (XTR-695SE only) 8

arning System

®

Adjustment 8

(XTR-695SE only) 8

™

®

Alerts

®

. . . . . . . . . . . . . . . . . . . . . . . . . . . .

10-11

18

21 - 22

27

5
6
6

7
7
7

7

8

9

10

12

14

16

18
18

23

WHISTLER FEATURES

Feature Listings of XTR-690SE/695SE

3

1
6

9

0

1
8

12

4

1

3

2
11

7

3

5

4

5

1
6

9

10
8

12a

13

2
11

7

FEATURE DESCRIPTIONS

Whistler’s ergonomic and user-friendly design
provides a new level of operating convenience.
Special features include:

1. Bracket Release Button – provides quick
and easy release of the mounting bracket.

2. Speaker – provides distinct audio warnings
for X, K, Ka band radar, safety radar, and laser

Mounting Bracket Location

3.

mounting bracket firmly.

4. Radar Antenna – compact, high-efficiency

eceives radar signals.

antenna r

– slot holds

3

FEATURE DESCRIPTIONS

5. Front Laser – high gain optical lens
rovides increased sensitivity and field of

p

iew for leading-edge laser detection.

v

6. Rear Laser – an integrated optical

aveguide provides superior detection of

w

aser signals transmitted from behind.

l

7. City Button - reduces the annoyance of

false alerts typically encountered in urban

riving areas.

d

8. Quiet Button - pressing QUIET before a

signal is detected engages Auto Quiet Mode

tomatically reduces the audio level after

hich au

w
the initial warning to a low audio level setting.
Pressing QUIET during a radar/laser encounter
silences audio alerts, while allowing visual
alerts to keep you informed.

9. Power / Volume Control – push this button

to turn the unit on/off. Move back or
forward to adjust the audio level.

10. Dim / Dark - engages Dim/Dark modes.

11. Menu Button - enters Option Select Mode.

12. Text Display – provides distinct visual

confirmation of signals detected, signal
strength, and indicates engaged modes of
operation.

12a.7 Color Backlit LCD Text Display –

provides distinct visual confirmation of signa ls
detected, signal strength, and indicates
engaged modes of operation in 7 colors.

13. Low Profile Alert Periscopes - provide an

additional attention getting visual aler

IMPORTANT:

.

ttoo pprroovviiddee aaccccuurraattee ccoommppaassss hheeaaddiinnggss..
SSeeee CCoommppaassss CCaalliibbrraattiioonn SSeett--uupp sseeccttiioonn
oonn ppaaggee 1155..

TThhee uunniitt mmuusstt bbee ccaalliibbrraatteedd

45

Mounting Guidelines

INSTALLATION

Mount the unit as low as possible near the

•
enter of the windshield.

c

• Do not mount the unit behind wipers,

rnaments, mirrored sunscreens, etc. These

o
obstructions have metal surfaces which can

ffect radar and laser signals and reduce

a

ritical warning time. (Regular tinted glass

c
does not affect reception).

• Some windshields have an Instaclear

E
signals. Consult your dealer or the owner’s
manual supplied with your vehicle to determine
if your windshield has this coating.

• Avoid placing the unit in direct contact with

the windshield.

• To reduce the possibility of theft, conceal

the unit when not in use.

Windshield Mounting

• Install the two suction cups and rubber bumper

onto the bracket by fitting them into their holes.

t.

• Pr

location you have chosen.

™

lectriclear

IIMMPPOORRTTAANNT

ess the suction cups onto the windshield at the

ype coating, which affect radar

t

T

: Make sure the unit is level

Rubber
Bumper

™

r

o

Windshield
Mounting

Important: Some newer cars have a plastic safety

INSTALLATION OPERATION

oating on the inside of the windshield. The

c

indshield bracket may leave permanent marks on

w
this type of surface. To find out if your vehicle has

his type of windshield, check the vehicle’s owner’s

t

anual or ask your dealer. We recommend that you

m
do not leave the suction cup bracket on the window
in direct sunlight. If the detector is removed, this

ay cause blistering of the dash in some

m
vehicles.

• Slide the detector onto the bracket until it locks into
lace.

p

• If necessary, the unit may be leveled by bending

the windshield bracket. Press the bracket release
button and remove the detector before bending.

Power Cord Connection

• Plug the small end of the power cord into the
unit’s power jack.

• Plug the large end into the vehicle’s cigarette
lighter socket.

:

NNoottee:

Cord fits tightly into detector. When

installing the cord, expect some resistance.

Fuse Replacement

The lighter socket plug is equipped with a
replaceable 2 amp, 3AG fuse located behind the
silver tip. To replace the fuse, carefully unscrew
the tip of the plug.

IImmppoorrttaanntt:
spring which may fly out when disassembling.
Insert the new fuse with the spring and screw on
the tip. With use, screw cap on plug may loosen.
Retighten occasionally.

:

Unscrew slowly. The tip contains a

6

Power On, Self Test

To turn the unit ON or OFF, push the center of
the Power/Volume button.

E

ach time your Whistler detector is turned on,
an automatic self-test sequence confirms that
the speaker and visual displays are functional.

isplay shows in order:

• D

HISTLER 2. X-band 3. K-band 4.Ka-band

1.W

5. LASER NORM 6

8. POP ON 9. B S

IGHWAY

12.H

Teach/Tutorial Mode

Provides simulated alerts for each type of signal.

• Press City and Quiet buttons simultaneously

• Display Shows:

• Press Dark button to exit.

Setting Saver

Setting Saver saves your personalized settings
so that when the detector is turned off and then
on again, you do not have to re-enter them.

Feature Engaged Confirmation

Each time a button is pressed, one beep confirms
feature “on”, two beeps confirm feature “off”.

Integrated Real Voice

When selected, Real Voice®will be used to

ticulate the following:

ar

1. Band Identification

2. Safety Warning System messages

3. Feature Selection

Note: In cer

eplicate the text message.

r

..

SR OFF 7. VOICE ON

VR 3

tain cases, the voice message does not

10. FILT

7

ER

11. COMBO

®

Audio Level Adjustment

OPERATION

T

o change the audio level:

•

Move Power/Volume button back to increase
audio level.

• Move Power/Volume button forward to
d

ecrease audio level. As audio level is
adjusted, beeps are provided and the display
indicates volume level.

Auto Quiet Mode

Auto Quiet mode re
to level (1) approximately 5 seconds after a radar or
safety radar signal is detected. The alert
new signal within 20 seconds will re
Auto Quiet mode does not affect laser alerts.

• Press Quiet (before a signal is detected) to
engage Auto Quiet mode.

• Once the Auto Quiet mode is engaged, you

may cancel the audio alarm by pr

• Press Quiet (when the unit is not alarming) to

cancel Auto Quiet mode.

Quiet Mode

Quiet mode cancels audio during an alert and any
new alert within 20 seconds. After 20 seconds of no
radar signal detected, the audio alerts are

ed.

restor

• Press Quiet to cancel the audio.

• Press Quiet a second time during an alert to

restore the standard audio alert pattern.

External Audio Jack (XTR-695SE only)

The 2.5mm external audio jack can be used to
connect an external speaker or headphones in
environments with high ambient noise levels. The
internal speaker will be disconnected.

Backlit Buttons (XTR-695SE only)

Function buttons ar

duces the selected audio level

for any

sume at level (1).

essing Quiet.

e illuminated for ease of use.

8