Whispair W5R09S2, W3M09S2, W5P09S2, A3W12S2, W5V09S2 Operating And Installation Instructions
...
OPERATING AND INSTALLATION INSTRUCTIONS
FOR WHISPAIR RANGEHOODS
TO AVOID THE RISK OF INJURY OR DAMAGE
TO THE PRODUCT IT IS ESSENTIAL TO READ
THESE INSTRUCTIONS PRIOR TO
INSTALLATION AND USE
Environmental Tip
2
Congratulations
Congratulations and thank you for choosing a WHISPAIR rangehood. We
are sure you will nd your new rangehood a pleasure to use.
To avoid the risks that are always present when you use an electrical
appliance it is important that the rangehood is installed correctly and that
you read the safety instructions carefully to avoid misuse and hazards.
We recommend that you keep this instruction booklet for future reference
and pass it on to any future owners.
AFTER UNPACKING THE RANGEHOOD PLEASE REVIEW YOUR NEW
ITEM TO ENSURE THAT IT HASN’T BEEN DAMAGED IN TRANSIT OR
IS MISSING ANY COMPONENTS. FAILURE TO REPORT ANY ISSUE
WITHIN 72 HOURS OF RECEIPT OF YOUR ITEM MAY RESULT IN ADDI-
TIONAL CHARGES.
Information on disposal for users
Most of the packing materials are recyclable. Please dispose of those
materials through your local recycling depot or by placing them in appro-
priate collection bin.
If you wish to discard this product, please contact your local authorities
and ask for the correct method of disposal.
•
•
Product Description & Carton Contents
Carton 1 - Hood Unit
You will be supplied with one of the three hood unit options detailed below.
Option 1 - Integrated Hood
Models include W3M06S2, W3M09S2, W3MD09S2 and
A3W12S2
Included in the carton:
1. Main hood housing including control module and lighting
2. Bafe Filters
3. Grease Trap
4. Fixing Screws
5. Operating & Installation Guide
Option 2 - Wall Hung Canopy
Models include W5L09S2, W5S09S2, W5R09S2, W5P09S2,
W5V09S2, W5B09S2, A5M09S2, A5C09S2 and A5N12S2
Included in the carton:
1. Main hood housing including control module and lighting
2. Bafe Filters
3. Grease Trap (W5L09S2 and A Series Hoods Only)
4. Flue Cover x2
5. Fixing Screws
6. Operating & Installation Guide
Option 3 - Island Hung Canopy
Models include W7S09S2, W7V09S2, W7B09S2 and A7N12S2
Included in the carton:
1. Main hood housing including control module and lighting
2. Bafe Filters
3. Grease Trap (A Series Hoods Only)
4. Flue Cover x2
5. Island Mounting Bracket
6. Fixing Screws
7. Operating & Installation Guide
3
Product Description & Carton Contents
Carton 2 - Fan Motor Unit
You will be supplied with one of the two fan motor options detailed.
Option 1 - Inline Solution (Fig. 4a)
Models include IL-765 and IP-1140
Unit designed to be located in a roof space and then
duct to an external vent.
Included in the carton:
1. KLEENAIR Inline Motor Unit
2. Mounting Bracket
3. Fixing Screws
4. Hose Clips x4
5. 200mm FlexiDuct (5 Mtr Length)
6. Stainless Steel Eave Vent
Option 2 - External Solution (Fig. 4b)
Models include EL-765, EP-1140 and EPP-2010
Unit designed to be mounted externally either on an
external wall or penetrating through the roof.
Included in the carton:
1. KLEENAIR External Motor Unit
2. Hose Clips x2
3. 200mm FlexiDuct (5 Mtr Length)
Optional accessories when roof mounting:
1. 200mm Tile Roof Install Kit (HBX200TILE)
Includes roof dektite (ashing) for tile
roof and mounting brackets x2
2. 200mm Metal Roof Install Kit (HBX200MET)
Includes roof dektite (ashing) for metal
roof and mounting brackets x2
Fig. 4b
Fig. 4a
4
Conditions of Use and Maintenance
This rangehood is a domestic appliance which has been manufactured and tested to comply with Australian
and New Zealand Standard AS/NZS 60335.2.31 and is designed to work under Australian and New Zealand
conditions. The hoods are designed to remove bi-products of cooking – heat, steam, grease and odour.
This appliance is intended for domestic application only. Any other usage is at the owner’s risk and could be
dangerous. The manufacturer cannot be held liable for damage resulting from incorrect or improper use or
operation. This unit is approved for electrical safety (N5761).
WHISPAIR reserves the right to change the specication without notice.
All WHISPAIR performance gures are based upon standards developed by the Haus Appliance Group, which
either comply or are in excess of the government regulated standards.
Safety
WARNING: The installation of WHISPAIR rangehoods must comply with the information in this guide.
Failure to install the rangehood in accordance with these installation instructions may result in
electrical hazards, injury, damage to your appliance and loss of warranty. Specically, failure by the
installer to install the screws or xing devices in accordance with these installation instructions may
result in electrical hazards. Please install the appliance as detailed in these instructions.
The rangehood is not intended for use by children or inrmed persons without supervision.
CAUTION: Accessible parts may become hot when used with cooking appliances. Please do not
touch halogen lighting whilst in use or for some time after switching off. The lamps operate at a high
temperature that may be harmful if contact is made.
Ensure the canopy rangehood is switched off before carrying out maintenance, to avoid any
possibility of electric shock.
Always use non-ammable materials to minimize the risk of re.
Do not ambé under the range hood.
There must be adequate ventilation of the room of operation when the range hood is used at the
same time as appliances burning gas or other fuels.
In the case of damage to power supply cords, use only an authorized service agent or licensed electrician.
Exhausted air must not be discharged into a chimney or ue.
5
Ducting & Extraction Levels
WHISPAIR ducting is designed to ensure optimum performance for your rangehood. Please follow the installation
instructions carefully.
Every WHISPAIR rangehood must be ducted to the externally or cavity mounted KLEENAIR unit by the use of
non-ammable ducting. The rangehood must not be ducted into a wall cavity or a ceiling space where a build-up
of grease can occur and become a potential re risk. Ensure the external outlet on the KLEENAIR unit is not
covered and the air ow is not restricted in any way as this may result in reduced performance.
The duct must at all times have a cross sectional surface area equivalent to the hood outlet. The hood outlet has
a circular cross section of 200mm in diameter or an approximate area of 31,400mm. Do not reduce the duct
size at any time and avoid sharp bends. If the duct run is longer than six (6) metres, it may be necessary to
enlarge the duct size to ensure optimum performance. The manufacturer does not guarantee performance
when the duct length is greater than six (6) metres.
Ensure that all ducting is correctly tted and sealed with pipe clips, duct tape or silicone to ensure that fumes do
not escape prior to reaching the KLEENAIR unit.
The WHISPAIR extraction calculations are based upon a 50pa change of head of pressure loss and are used to
factor the variance of air ow resistance through the ducting. 50pa is equivalent to approximately 4 metres (the
recommended length) of exi ducting with one gentle bend, which is above and beyond the industry standard
of one straight metre of ducting. The KLEENAIR LITE offers a powerful 765 cubic meters per hour (213 litres per
second) of air movement. The KLEENAIR PRO offers 1140 cubic meters per hour (317 litres per second) whilst
for serious users the KLEENAIR PRO PLUS boasts a market leading 2010 cubic meters per hour (558 litres per second).
To Rangehood Unit
Gentle Bend
In Ducting
THE RECOMMENDED DUCT
LENGTH (INSTALLATION DISTANCE)
IS 4 METERS.
THE MINIMUM INSTALLATION
DISTANCE IS 3 METERS.
GENTLE BENDS IN THE DUCTING
ARE RECOMMENDED AS IT ASSISTS
IN MUFFLING NOISE FROM THE
EXTERNAL FAN UNIT.
6
Loading...