THANK YOU for purchasing this high-quality product. If you should experience a problem not covered in TROUBLESHOOTING,
please visit our website at www.whirlpool.ca for additional information. Ifyou still need assistance, call us at 1-800-807-6777.
You will need your model and serial number located on the oven frame behind the storage drawer panel.
Table of Contents
RANGE SAFETY ....................................................................................... 2
The Anti-Tip Bracket ............................................................................. 2
FEATURE GUIDE ..................................................................................... 4
COOKTOP USE ........................................................................................ 6
Cookware .............................................................................................. 7
Home Canning ...................................................................................... 8
OVEN USE ................................................................................................ 9
Electronic Oven Controls ...................................................................... 9
Sabbath Mode ...................................................................................... 9
Aluminum Foil...................................................................................... 10
Positioning Racks and Bakeware ....................................................... 10
Oven Vent............................................................................................ 11
Baking and Roasting ........................................................................... 11
Broiling ................................................................................................ 11
Convection Baking and Roasting ....................................................... 12
Cook Time ........................................................................................... 12
RANGE CARE ......................................................................................... 13
Self-Cleaning Cycle (on some models) .............................................. 13
Steam Clean ........................................................................................ 13
General Cleaning ................................................................................. 14
Oven Light ........................................................................................... 15
Appliance Outlets (on some models) .................................................. 15
TROUBLESHOOTING ............................................................................ 15
ACCESSORIES ...................................................................................... 17
WARRANTY ............................................................................................ 18
W10719736A
RANGE SAFETY
Your safety and the safety of others are very important.
We have provided many important safety messages in this manual and on your appliance. Always read and obey all safety
messages.
This is the safety alert symbol.
This symbol alerts you to potential hazards that can kill or hurt you and others.
All safety messages will follow the safety alert symbol and either the word "DANGER" or "WARNING."
These words mean:
You can be killed or seriously injured if you don't immediately
follow instructions.
You can be killed or seriously injured if you don't follow
instructions.
All safety messages will tell you what the potential hazard is, tell you how to reduce the chance of injury, and tell you what can
happen if the instructions are not followed.
.... "he AntioTip Bracket
The range will not tip during normal use. However, the range can tip if you apply too much force or weight to the open door without having
the anti-tip bracket fastened down properly.
Tip Over Hazard
A child or adult can tip the range and be killed.
Verify the anti-tip bracket has been properly installed and engaged per installation instructions.
Re-engage anti-tip bracket if range is moved.
Do not operate range without anti-tip bracket installed and engaged.
Failure to follow these instructions can result in death or serious burns to children and adults.
To verify the anti-tip bracket is installed and engaged:
Bracket
Anti-Tip
Range Foot
State of California Proposition 65 Warnings:
WARNING: This product contains one or more chemicals known to the State of California to cause cancer.
WARNING: This product contains one or more chemicals known to the State of California to cause birth defects or other
reproductive harm.
• Slide range forward.
• Look for the anti-tip bracket securely attached to floor or wall.
• Slide range back so rear range foot is under anti-tip bracket.
• See installation instructions for details.
iMPORTANT SAFETY iNSTRUCTiONS
WARN(NG: To reduce the risk of fire, electrical shock,
injury to persons, or damage when using the range, follow
basic precautions, including the following:
[] WARNING: TO REDUCE THE RISK OF TIPPING OF
THE RANGE, THE RANGE MUST BE SECURED BY
PROPERLY INSTALLED ANTI-TIP DEVICES. TO CHECK
IF THE DEVICES ARE INSTALLED PROPERLY, SLIDE
RANGE FORWARD, LOOK FOR ANTI-TIP BRACKET
SECURELY ATTACHED TO FLOOR OR WALL, AND
SLIDE RANGE BACK SO REAR RANGE FOOT IS
UNDER ANTI-TIP BRACKET.
[] CAUTION: Do not store items of interest to children in
cabinets above a range or on the backguard of a range -
children climbing on the range to reach items could be
seriously injured.
[] Proper Installation - Be sure the range is properly installed
and grounded by a qualified technician.
[] Never Use the Range for Warming or Heating the Room.
[] Do Not Leave Children Alone - Children should not be left
alone or unattended in area where the range is in use.
They should never be allowed to sit or stand on any part of
the range.
[] Wear Proper Apparel - Loose-fitting or hanging garments
should never be worn while using the range.
[] User Servicing - Do not repair or replace any part of the
range unless specifically recommended in the manual. All
other servicing should be referred to a qualified technician.
[] Storage in or on the Range - Flammable materials should
not be stored in an oven or near surface units.
[] Do Not Use Water on Grease Fires - Smother fire or flame
or use dry chemical or foam-type extinguisher.
[] Use Only Dry Potholders - Moist or damp potholders on
hot surfaces may result in burns from steam. Do not let
potholder touch hot heating elements. Do not use a towel
or other bulky cloth.
[] DO NOT TOUCH SURFACE UNITS OR AREAS NEAR
UNITS - Surface units may be hot even though they are
dark in color. Areas near surface units may become hot
enough to cause burns. During and after use, do not touch,
or let clothing or other flammable materials contact surface
units or areas near units until they have had sufficient time
to cool. Among those areas are the cooktop and surfaces
facing the cooktop.
[] Use Proper Pan Size - The range is equipped with one or
more surface units of different size. Select utensils having
flat bottoms large enough to cover the surface unit heating
element. The use of undersized utensils will expose a
portion of the heating element to direct contact and may
result in ignition of clothing. Proper relationship of utensil to
burner will also improve efficiency.
[] Never Leave Surface Units Unattended at High Heat
Settings - Boilover causes smoking and greasy spillovers
that may ignite.
[] Make Sure Reflector Pans or Drip Bowls Are in Place -
Absence of these pans or bowls during cooking may
subject wiring or components underneath to damage.
[] Protective Liners - Do not use aluminum foil to line surface
unit drip bowls or oven bottoms, except as suggested in
the manual. Improper installation of these liners may result
in a risk of electric shock, or fire.
[] Glazed Cooking Utensils - Only certain types of glass,
glass/ceramic, ceramic, earthenware, or other glazed
utensils are suitable for range-top service without breaking
due to the sudden change in temperature.
[] Utensil Handles Should Be Turned Inward and Not Extend
Over Adjacent Surface Units - To reduce the risk of burns,
ignition of flammable materials, and spillage due to
unintentional contact with the utensil, the handle of a
utensil should be positioned so that it is turned inward, and
does not extend over adjacent surface units.
[] Do Not Soak Removable Heating Elements - Heating
elements should never be immersed in water.
[] Do Not Cook on Broken Cooktop - If cooktop should
break, cleaning solutions and spillovers may penetrate the
broken cooktop and create a risk of electric shock. Contact
a qualified technician immediately.
[] Clean Cooktop With Caution - If a wet sponge or cloth is
used to wipe spills on a hot cooking area, be careful to
avoid steam burn. Some cleaners can produce noxious
fumes if applied to a hot surface.
[] Use Care When Opening Door - Let hot air or steam
escape before removing or replacing food.
[] Do Not Heat Unopened Food Containers - Build-up of
pressure may cause container to burst and result in injury.
[] Keep Oven Vent Ducts Unobstructed.
[] Placement of Oven Racks - Always place oven racks in
desired location while oven is cool. If rack must be moved
while oven is hot, do not let potholder contact hot heating
element in oven.
[] DO NOT TOUCH HEATING ELEMENTS OR INTERIOR
SURFACES OF OVEN - Heating elements may be hot even
though they are dark in color. Interior surfaces of an oven
become hot enough to cause burns. During and after use,
do not touch, or let clothing or other flammable materials
contact heating elements or interior surfaces of oven until
they have had sufficient time to cool. Other surfaces of the
appliance may become hot enough to cause burns - among
these surfaces are oven vent openings and surfaces near
these openings, oven doors, and windows of oven doors.
For self-cleaning ranges -
[] Do Not Clean Door Gasket - The door gasket is essential
for a good seal. Care should be taken not to rub, damage,
or move the gasket.
[] Do Not Use Oven Cleaners - No commercial oven cleaner
or oven liner protective coating of any kind should be used
in or around any part of the oven.
[] Clean Only Parts Listed in Manual.
[] Before Self-Cleaning the Oven - Remove broiler pan and
other utensils.
For units with ventilating hood -
[] Clean Ventilating Hoods Frequently - Grease should not
be allowed to accumulate on hood or filter.
[] When flambeing foods under the hood, turn the fan on.
SAVE THESE INSTRUCTIONS
FEATURE GUIDE
This manual covers several models. Your model may have some or all of the items listed. Refer to this manual or the Frequently Asked
Questions (FAQs) section of our website at www.whirlpool.com for more detailed instructions. In Canada, refer to the Customer Service
Section at www.whirlpool.ca.
Bake Broil
Start Cancel
Food Poisoning Hazard
: Convect Warm ;
Keep ':
®
, ........ Temp/Time
Timer _
i Set/Off
Do not let food sit in oven more than one hour before
or after cooking.
Doing so can result in food poisoning or sickness.
KEYPAD FEATURE INSTRUCTIONS
CLOCK Clock The Clock uses a 12-hour cycle.
1. Check that the oven is off.
2. Press CLOCK.
3. Press TEMP/TIME "up" or "down" arrow pads to set the time of day.
4. Press CLOCK or START.
OVEN LIGHT Oven cavity ight Depending on your model the oven iight maY be Controlled by a keypad on the oven Control pane
or by a manual switch located on the top !eft corner of the range console: While the 0yen door is
closed, press the oven light switch to turn the light on and off. The oven light will come on when the
oven door is opened, The oven light wi!! not come on during the Se!f-C!ean cyc!e,
TIMER Oven timer The Timer can be set in hours or minutes up to 12 hours and 59 minutes.
(Set/Off) 1. Press TIMER.
2. Press TEMP/TIME "up" or "down" arrow pads to set the length of time.
3. Press START to begin the countdown. If enabled, end-of-cycle tones will sound at end of
countdown.
4. Press TIMER twice to cancel the Timer. Do not press the Cancel keypad because the oven will
turn off.
5. If the TIMER is running, but not in the display, press TIMER to display the countdown for
5 seconds.
START cOoking start The Start pad begins any oven funct onl if start is not pressed Within 5 seconds PUSH appears
in the display. If Start isnot pressed within 1 minute after pressing a keypad the function is
cance!ed and the time of day is displayed,
CANCEL Range function The Cancel keypad stops any function except the Clock, Timer and Oven Control Lockout.
TEMP/TIME Temperature and The ,,up,,or !,down'! arrow pads are used to adjust time and temperature settings.
time adjust
BAKE Baking and
roasting
1. Press BAKE.
2. Press TEMP/TIME "up" or "down" arrow pads to set a temperature other than 350°F (175°C) in
5°F (5°C) increments between 170°F and 500°F (75°C and 260°C).
3. Press START.
4. To change the temperature, repeat Step 2. Press START or wait 5 seconds for the change to
take effect.
5. Press CANCEL when finished.
BROIL Broiling
1. Press BROIL.
2. Press TEMP/TIME "up" or "down" arrow pads to change the temperature in 5°F (5°C)
increments between 300°F and 500°F (150°C and 260°C).
3. Press START. and allow oven to preheat for 5 minutes.
4. Position cookware in the oven and close the oven door to the broil stop position so that the
door is open approximately 6" (15 cm).
5. Press CANCEL when finished.
KEYPAD FEATURE INSTRUCTIONS
CONVECT Convection 1. Press CONVECT.
(on some baking and 2. Press TEMP/TIME "up" or "down" arrow pads to set a temperature other than 350°F (175°C) in
models) roasting 5°F (5°C) increments between 170°F and 500°F (75°C and 260°C).
3. Press START.
4. To change the temperature, repeat Step 2. Press START or wait 5 seconds for the change to
take effect.
5. Press CANCEL when finished.
// NOTE"Theoven wi!!automatica!!yturn off after 60 minutes.
START TIME Delayed start The Start Time keypad is used to enter the starting time for an oven function with a delayed start.
Start Time should not be used for foods such as breads and cakes because they may not bake
properly.
To set a Timed Cook or a Delayed Timed Cook, see "Cook Time" section.
COOK TIME Timed cooking Timed Cooking allows the oven to be set to turn on at a certain time of day, cook for a Set iength of
...... time, and!or shut off automatically. ,, ...............................
SELF CLEAN Self-Cleaning See the "Self-Cleaning Cycle" section.
(on some cycle
models)
STEAM Steam cleaning See ',Steam Clean" section for more information and helpful tips for the Steam Clean featurel
CLEAN cyc e 1 Remov e a!! racks and accessodes ffom the oven cavityl
START Oven control
(hold 3 sec lockout
to lock)
To set a Timed cook or a DelaYed Timed Co0k, see Cook Time sectionl
2. PressSTEAM CLEANI Add_" "H20 will appear in the displaYl
3, Add 10 oz (295 mL) of distilled or filtered water to the oven bottom. ....................................
4. Push START.
5. After 20 minutes, ,'END,' Will appear in the display to signal the end of the cyclel
6' Press CANCEL to Clear the displaY:
7; Remove any excess water with a sponge or cloth and wipe down oven interior.
1. Check that the oven is off.
2. Press and hold the START (hold 3 sec to lock) keypad for 3 seconds.
3. A tone will sound, and "Loc" will be displayed.
4. Repeat to unlock. Only the CLOCK, OVEN LIGHT and TIMER keypads will function with the
controls locked. The cooktop functions are not affected by the oven control lockout.
COOKTOP USE
Fire Hazard
Turn off all controls when done cooking.
Failure to do so can result in death or fire.
OFF
Lo -- Hi
2
\
The control knobs can be set to anywhere between Hi and Lo.
Push in and turn to setting.
may become hot.
I REMEMBER: When range is in use, the entire cooktop area
Ceramic Glass Cooktop
The surface cooking area will glow red when an element is on.
Some parts of the surface cooking area may not glow red when an
element is on. This is normal operation. The burner will cycle on
and off to maintain the selected heat level. It will also randomly
cycle off and back on again even while in High to keep the cooktop
from extreme temperatures.
It is normal for the surface of light colored ceramic glass to appear
to change color when surface cooking areas are hot. As the glass
cools, it will return to its original color.
Clean the cooktop after each use to help avoid scratches, pitting,
abrasions and to condition the glass surface. Ceramic glass
cooktop cleaner and a cooktop scraper are also recommended for
stubborn soils. Do not use abrasive cleaners, cleaning pads or
harsh chemicals for cleaning. The Cooktop Care Kit Part Number
3160B contains all of the items needed to clean and condition your
ceramic glass cooktop. Refer to the "Range Care" section for
additional information.
IMPORTANT: To avoid permanent damage to the cooktop surface
and to make soils easier to remove, clean the cooktop after each
use to remove all soils.
• Avoid storing jars or cans above the cooktop. Dropping a heavy
or hard object onto the cooktop could crack the cooktop.
To avoid damage to the cooktop, do not leave a hot lid on the
cooktop. As the cooktop cools, air can become trapped
between the lid and the cooktop, and the ceramic glass could
break when the lid is removed.
For foods containing sugar in any form, clean up all spills and
soils as soon as possible. Allow the cooktop to cool down
slightly. Then, while wearing oven mitts, remove the spills using
a scraper while the surface is still warm. Ifsugary spills are
allowed to cool down, they can adhere to the cooktop and can
cause pitting and permanent marks.
To avoid scratches, do not slide cookware or bakeware across
the cooktop. Aluminum or copper bottoms and rough finishes
on cookware or bakeware could leave scratches or marks on
the cooktop.
Do not cook popcorn in prepackaged aluminum containers on
the cooktop. They could leave aluminum marks that cannot be
removed completely.
To avoid damage to the cooktop, do not allow objects that
could melt, such as plastic or aluminum foil, to touch any part
of the entire cooktop.
To avoid damage to the cooktop, do not use the cooktop as a
cutting board.
Use cookware about the same size as the surface cooking
area. Cookware should not extend more than 1/2' (13 mm)
outside the area.
/ B
I \
\ /
A. Surface cooking area
B. Cookware/canner
C. V2"(13 mm) maximum overhang
l
I
Use flat-bottomed cookware for best heat conduction and
energy efficiency. Cookware with rounded, warped, ribbed or
dented bottoms could cause uneven heating and poor cooking
results.
Determine flatness by placing the straight edge of a ruler
across the bottom of the cookware. While you rotate the ruler,
no space or light should be visible between it and the
cookware.
Cookware designed with slightly indented bottoms or small
expansion channels can be used.
Make sure the bottoms of pots and pans are clean and dry
before using them. Residue and water can leave deposits when
heated.
To avoid damage to the cooktop, do not cook foods directly on
the cooktop.
Ceramic Glass Cooktop Cleaning
Clean the cooktop after each use to help avoid scratches, pitting,
abrasions and to condition the glass surface. Ceramic glass
cooktop cleaner and a cooktop scraper are also recommended for
stubborn soils. Do not use abrasive cleaners, cleaning pads or
harsh chemicals for cleaning. The Cooktop Care Kit Part Number
31605B contains all of the items needed to clean and condition
your ceramic glass cooktop. Refer to the "Range Care" section for
additional information.
IMPORTANT: To avoid permanent damage to the cooktop surface
and to make soils easier to remove, clean the cooktop after each
use to remove all soils.
Cooktop On Indicator Light
The Cooktop On indicator light is located on the console panel.
When any control knob on the console panel is turned on, the
Cooktop On indicator light will glow.
Hot Surface Indicator Light
On ceramic glass models, the hot surface indicator light is located
on the console panel.
The hot surface indicator light will glow as long as any surface
cooking area is too hot to touch, even after the surface cooking
area is turned off.
Dual Zone Cooking Element (on some models)
The Dual Zone Cooking Element offers flexibility depending on the
size of the cookware. Single size can be used in the same way as a
regular element. The dual size combines both the single and outer
element and is recommended for larger size cookware.
OFF
Lo lJ" Lo
A .............................(
Hi Hi
A.Dual
B. Single
Rapid Boil Element (on some models)
The Rapid Boil Element offers additional cooking flexibility. The
Rapid Boil element can be used to boil liquids faster. The lowest
melt setting can be used to prepare sauces, to brown or saute
foods and to keep foods at a low temperature. Use cookware
appropriate in size for the Rapid Boil Element.
OFF
Warm Zone Element (on some models)
Food Poisoning Hazard
Do not let food sit for more than one hour before or
after cooking.
Doing so can result in food poisoning or sickness.
Use the Warm Zone element to keep cooked foods warm.
One hour is the recommended maximum time to maintain food
quality.
Do not use it to heat cold foods.
The Warm Zone element can be used alone or when any of the
other surface cooking areas are being used.
The Warm Zone element area will not glow red when cycling on.
However, the Element On light will glow while the Cooktop Warm
Zone element is in use.
• Use only cookware recommended for oven and cooktop use.
• Cover all foods with a lid or aluminum foil. When warming
baked goods, allow a small opening in the cover for moisture to
escape.
• To avoid damage to the cooktop, do not use plastic wrap to
cover food because the plastic wrap may melt.
• Use pot holders or oven mitts to remove food.
A Melt __,? Hi B
2
4
Med
A. Lower heat option
B. Rapid Boil option
IMPORTANT: Do not leave empty cookware on a hot surface
cooking area, element or surface burner.
Ideal cookware should have a flat bottom, straight sides and a well-
fitting lid, and the material should be of medium-to-heavy
thickness.
Rough finishes may scratch the cooktop. Aluminum and copper
may be used as a core or base in cookware. However, when used
as a base they can leave permanent marks on the surfaces.
Cookware material is a factor in how quickly and evenly heat is
transferred, which affects cooking results. A nonstick finish has the
same characteristics as its base material. For example, aluminum
cookware with a nonstick finish will take on the properties of
aluminum.
Cookware with nonstick surfaces should not be used under the
broiler.
[_ Warm Zone
On/off
To Use:
1. To turn on, press WARM 7ONE push button.
2. To turn off, press WARM 7ONE push button a second time.
Check for flatness by placing the straight edge of a ruler across the
bottom of the cookware. While you rotate the ruler, no space or
light should be visible between it and the cookware.
Usethefollowingchartasaguideforcookwarematerial
characteristics.
COOKWARE CHARACTERISTICS
Aluminum • Heats quickly and evenly.
• Suitable for all types of cooking.
• Medium or heavy thickness is best for
most cooking tasks.
• May leave aluminum residues, which
may be diminished if cleaned
immediately after cooking.
Cast iron
Ceramic or
Ceramic glass
Copper
• Heats slowly and evenly.
• Good for browning and frying.
• Maintains heat for slow cooking.
• Rough edges or burrs may scratch the
cooktop.
• Follow manufacturer's instructions.
• Heats slowly, but unevenly.
• Ideal results on low to medium heat
settings.
• May scratch the cooktop.
• Heats very quickly and evenly.
• May leave copper residues, which
may be diminished if cleaned
immediately after cooking.
• Can leave a permanent stain or bond
to the cooktop if overheated.
COOKWARE CHARACTERISTICS
Earthenware • Follow
Porcelain enamel-on-steel or cast • See stainless steel or
iron cast iron.
Stainless steel
Use flat-bottomed cookware for best cooking results and energy
efficiency. The cookware should be about the same size as the
cooking area outlined on the cooktop. Cookware should not extend
more than 1/2"(13 mm) outside the area.
manufacturer's
instructions.
• Use on low heat
settings.
• May scratch the
cooktop.
Porcelain enamel
bakeware without the
metal base may bond
to the cooktop if
overheated.
Heats quickly, but
unevenly.
A core or base of
aluminum or copper
on stainless steel
provides even
heating.
Home Oannin 9
Canning can be performed on a glass smooth top cooking surface
or traditional coil element cooktop. When canning for long periods,
alternate the use of surface cooking areas or elements between
batches. This allows time for the most recently used areas to cool.
• Center the canner on the largest surface cooking area or
element. On electric cooktops, canners should not extend
more than 1/2"(13 mm) beyond the surface cooking area or
element.
Do not place canner on 2 surface cooking areas or elements at
the same time.
On ceramic glass models, use only flat-bottomed canners to
avoid damage to the cooktop and elements.
For more information, contact your local agricultural extension
office, or refer to published home canning guides. Companies
that manufacture home canning products can also offer
assistance.
OVEN USE
Odors and smoke are normal when the oven is used the first few
times, or when it is heavily soiled.
E ect onic Oven Oont oB
IMPORTANT: The health of some birds is extremely sensitive to the
fumes given off. Exposure to the fumes may result in death to
certain birds. Always move birds to another closed and well-
ventilated room.
Control Display
The display will flash when powered up or after a power loss. Press
CANCEL to clear. When oven is not in use, the time of day is
displayed.
Options Mode
Press and hold TIMER for 5 seconds, and "Opt" will appear. Use
the Temp/Time "up" or "down" arrow pads to cycle through the
following options. Press CANCEL to exit the mode.
Fahrenheit and Celsius
The temperature is preset at Fahrenheit, but can be changed to
Celsius. Press TIMER to toggle between Fahrenheit and Celsius.
Press CANCEL to exit.
End of Cycle Tones
"bl" (beep once) or "b" (continue to beep) will be displayed. Press
TIMER to toggle through selections. Press CANCEL to exit.
Oven Light with Door Open
"LOn" indicates that the oven light will turn on when the door is
open. If "LOFF" is displayed, the oven light will turn on only with the
oven light switch. Press TIMER to toggle through selection. Press
CANCEL to exit.
12-Hour Shutoff
If "12 Hr" is displayed, the oven will automatically shut off after
12 hours. Press TIMER to toggle to "- - Hr" to disable the 12-hour
shutoff. Press CANCEL to exit.
Tones
Tones are audible signals, indicating the following:
Basic Functions
One tone
• Valid pad press
• Oven is preheated (long tone)
• Function has been entered
• Reminder (on some models), repeating every 20 seconds after
the end-of-cycle tones
Three tones
• Invalid pad press
Four tones
• End of cycle
Oven Temperature Control
IMPORTANT: Do not use a thermometer to measure oven
temperature. Elements will cycle on and off as needed to provide
consistent temperature but may run slightly hot or cool at any point
in time due to this cycling. Most thermometers are slow to react to
temperature change and will not provide an accurate reading due
to this cycling.
The oven provides accurate temperatures; however, it may cook
faster or slower than your previous oven, so the temperature can
be adjusted to personalize it for your cooking needs. It can be
changed in Fahrenheit or Celsius.
To Adjust Oven Temperature:
1. Press and hold BAKE for 5 seconds until the oven display
shows the current setting, for example "0°F CAL" or "00."
2. Press the Temp/Time "up" or "down" arrow pads to increase or
to decrease the temperature in 10°F (5°C or 6°C) amounts. The
adjustment can be set between 30°F (17°C) and -30°F (-17°C).
3. Press START.
Sabbath
The Sabbath Mode sets the oven to remain on in a Bake setting
until turned off. A Timed Bake can also be set to keep the oven on
for only part of the Sabbath. The Oven Control Lockout Feature (if
present) will be disabled during the Sabbath Mode. After the
Sabbath Mode is set no tones will sound, the display will not show
the temperature, the Kitchen Timer Mode will be canceled (if active)
and only the following pads will function:
• "up" or"down" arrow pads
• Cancel
When the oven door is opened or closed, the oven light will not turn
on or off and the heating elements will not turn on or off
immediately.
When power is restored after a power failure, the oven will return to
Sabbath Mode and remain Sabbath compliant with the bake
elements off until the Cancel keypad is pressed.
Pressing the Cancel keypad at any time returns the oven to the
normal cooking mode (not Sabbath Mode compliant).
Mode
Before entering the Sabbath Mode, it must be decided if the oven
light is to be on or off for the entire Sabbath Mode period. If the
light is on when entering Sabbath Mode, it will remain on for the
entire time Sabbath Mode is in use. If the light is off when entering
Sabbath Mode, it will remain off for the entire time Sabbath Mode is
in use. Opening the oven door or pressing the Oven Light keypad
will not affect the oven light once Sabbath Mode has been entered.
If the oven has the Convection Bake feature, the oven light is
controlled by a separate Oven Light switch on the console. If the
oven light is on when entering the Sabbath Mode, it will remain on
for the entire time Sabbath Mode is in use. For the oven light to be
off during the Sabbath Mode, the light bulb must be removed from
the oven prior to entering the Sabbath Mode. Not performing these
steps will cause the oven light to turn on when the oven door is
opened, resulting in the oven being not Sabbath compliant.
On the Holiday, the oven temperature can be changed once the
oven is in Sabbath Mode by pressing the "up" or "down" arrow
pads. The oven temperature will change 25°F (14°C) each time the
keypad is pressed. The display will not change, and there will be no
sounds during this adjustment.
To Bake Using Sabbath Mode:
Press BAKE.1=
2.
Press the "up" or "down" arrow pads.
3.
Press START.
4.
Press and hold the TIMER keypad for 5 seconds. "SAb" will
flash in the display.
5. Press START within 5 seconds to enter Sabbath Mode;
otherwise, the entire cycle cancels out. "SAb" will stop flashing
and remain on in the display. The oven is now in Sabbath Mode
and is Sabbath compliant.
Pressing the Cancel keypad at any time returns the oven to the
normal cooking mode (not Sabbath Mode compliant).
To set a Timed Bake using Sabbath Mode
(on some models):
Food Poisoning Hazard
Do not let food sit in oven more than one hour before
or after cooking.
Doing so can result in food poisoning or sickness.
1. Press BAKE.
2. Press the "up" or "down" arrow pads to enter a temperature
other than the one displayed.
3. Press COOK TIME. The Cook Time oven indicator light will light
up.
4. Press the "up" or "down" arrow pads to enter a cook time
length.
5. Press START.
6. Press and hold the TIMER keypad for 5 seconds. "SAb" will
flash in the display.
7. Press START within 5 seconds to enter Sabbath Mode;
otherwise, the entire cycle cancels out. "SAb" will stop flashing
and remain on inthe display. The oven is now in Sabbath Mode
and is Sabbath compliant. The Bake, On and Cook Time
indicator lights will be displayed.
When the set cook time ends, the oven will shut off automatically
and the indicator lights will turn off, indicating the end of the cycle.
Pressing the Cancel keypad at any time returns the oven to the
normal cooking mode (not Sabbath Mode compliant).
To set a Delayed Timed Bake using Sabbath Mode
(on some models):
1. Press BAKE.
2. Press the "up" or "down" arrow pads to enter a temperature
other than the one displayed.
3. Press COOK TIME. The Cook Time oven indicator light will light
up.
4. Press the "up" or "down" arrow pads to enter a cook time
length.
5. Press START TIME. The Start Time indicator light will light up.
6. Press the "up" or "down" arrow pads to enter a start time.
7. Press START.
8.
Press and hold the TIMER keypad for 5 seconds. "SAb" will
flash in the display.
9. Press START within 5 seconds to enter Sabbath Mode;
otherwise, the entire cycle cancels out. "SAb" will stop flashing
and remain on inthe display. The oven is now in Sabbath Mode
and is Sabbath compliant. The On and Delay indicator lights
will be displayed.
When the start time is reached the Bake, On and Cook Time
indicator lights will automatically turn on. When the set cook time
ends, the oven will shut off automatically and the indicator lights
will turn off, indicating the end of the cycle.
Pressing the Cancel keypad at any time returns the oven to the
normal cooking mode (not Sabbath Mode compliant).
A uminum Foi
IMPORTANT: To avoid permanent damage to the oven bottom For best cooking results, do not cover entire oven rack with foil
finish, do not line the oven bottom with any type of foil or liner, because air must be able to move freely.
Positioning Racks and Bakewa e
IMPORTANT: To avoid permanent damage to the porcelain finish, Racks
do not place food or bakeware directly on the oven door or bottom. • Position racks before turning on the oven.
Bakeware
To cook food evenly, hot air must be able to circulate. Allow 2" (5)
of space around bakeware and oven walls. Make sure that no
bakeware piece is directly over another.
• Do not move racks with bakeware on them.
• Make sure racks are level.
Tomove a rack, pull it out to the stop position, raise the front edge,
and then lift out. Use the following illustration and charts as a
guide.
10
Rack Positions
Rack 5: Toasting bread or broiling thin, non-fatty foods.
Rack 4: Use for 2-rack baking and broiling.
Rack 3: Most baked goods on a cookie sheet, muffin pan or jelly
roll pan; and layer cakes. Broiling chicken pieces.
Rack 2: Pies, casseroles, yeast bread, quick breads, frozen
convenience foods, and 2-rack baking.
Rack 1: Roasting large and small cuts of meat and poultry.
Multiple Rack Cooking
2-rack: Use rack positions 2 and 4.
Oven Vent
A
A. Oven vent
Baking and Roasting
ACCUBAKE TM Temperature Management System
The ACCUBAKE TM system electronically regulates the oven heat
levels during preheat and bake to maintain a precise temperature
range for optimal cooking results. The bake and broil elements
cycle on and off in intervals. The bake element will glow red when
cycling on; the broil element will not. This feature is automatically
activated when the oven is in use.
Before baking and roasting, position racks according to
"Positioning Racks and Bakeware" section. When roasting, it is not
necessary to wait for the oven preheat cycle to end before putting
food in unless it is recommended in the recipe.
Baking Layer Cakes on 2 Racks
For best results when baking cakes on 2 racks, use racks 2 and 4
for baking. Place the cakes on the racks as shown.
The oven vent releases hot air and moisture from the oven, and
should not be blocked or covered. Blocking or covering the vent
will cause poor air circulation, affecting cooking and cleaning
results. Do not set plastics, paper or other items that could melt or
burn near the oven vent.
Preheating
When START is pressed, the oven will begin preheating. Once
100°F (38°C) is reached, the display temperature will increase as
the actual temperature of the oven increases. When the preheat
temperature is reached, a tone will sound, and the selected
temperature will appear on the display.
Leave the door open 6" (15 cm) at the broil stop position to ensure
proper broiling temperature. Preheat the oven for 5 minutes before
putting food in unless recommended otherwise in the recipe.
Position food on grid in a broiler pan, then place it in the center of
the oven rack.
/
/
/
/
NOTE: Odors and smoke are normal the first few times the oven is
used or if the oven is heavily soiled.
Changing the temperature when broiling allows more precise
control when cooking. The lower the broil setting, the slower the
cooking. Thicker cuts and unevenly shaped pieces of meat, fish
and poultry may cook better at lower broil settings. Use racks 4 or
5 for broiling. Refer to the "Positioning Racks and Bakeware"
section for more information.
On lower settings, the broil element will cycle on and off to maintain
the proper temperature.
• For best results, use a broiler pan and grid. It is designed to
drain juices and help avoid spatter and smoke.
Ifyou would like to purchase a broiler pan, one may be ordered.
Please refer to the "Accessories" section for more information.
11
Convection Bakin 9 and Boasting
(on some models}
In a convection oven, the fan-circulated hot air continually With convection cooking, most foods can be cooked at a
distributes heat more evenly than the natural movement of air in a temperature 25°F (15°C) lower than in a standard thermal oven,
standard thermal oven. This movement of hot air helps maintain a and cooking time can be shortened by up to 30%.
consistent temperature throughout the oven, cooking foods more During convection baking or roasting, the bake and broil elements
evenly, crisping surfaces while sealing in moisture and yielding cycle on and off in intervals to maintain the oven temperature, while
crustier breads, the fan circulates the hot air.
If the oven door is opened during convection baking or roasting,
the fan will turn off immediately. It will come back on when the oven
door is closed.
Cook "I'ime
To Set a Delayed Timed Cook:
Before setting, make sure the clock is set to the correct time of day.
See the "Clock" keypad feature in the "Feature Guide" section.
Food Poisoning Hazard
Do not let food sit in oven more than one hour before
or after cooking.
Doing so can result in food poisoning or sickness.
To Set a Timed Cook:
1. Press BAKE. The bake indicator light will light up.
2. Press the TEMP/TIME "up" or "down" arrow pads to enter a
temperature other than the one displayed.
3. Press COOK TIME. The cook time oven indicator light will light
up.
4. Press the TEMP/TIME "up" or "down" arrow pads to enter the
length of time to cook.
5. Press START. The display will count down the time. When the
time ends, the oven will shut off automatically and "End" will
appear on the display.
6. Press CANCEL to clear the display.
1. Press BAKE.
2. Press the TEMP/TIME "up" or "down" arrow pads to enter a
temperature other than the one displayed.
3. Press COOK TIME. The cook time oven indicator light will light
up.
4. Press TEMP/TIME "up" or "down" arrow pads to enter the
length of time to cook.
5. Press START TIME. The start time/delay oven indicator light will
light up.
6. Press TEMP/TIME "up" or "down" arrow pads to enter the time
of day to start.
7. Press START.
When the start time is reached, the oven will automatically turn on.
The temperature and/or time settings can be changed anytime
after pressing Start by repeating steps 1-7. When the set cook time
ends, the oven will shut off automatically and "End" will appear on
the display.
8. Press CANCEL to clear the display.
12