Whirlpool YLTE5243DQ5, YLTE6234DQ4, YLTE6234DQ3, YLTE5243DQ4 Owner’s Manual
WASHER/DRYERUSERINSTRUCTIONS
INSTRUCTIONSPOUR L'UTILISATEUR
DELALAVEUSE/SECHEUSE
TableofContents/Tabledesmatibres
ASSISTANCE OR SERVICE ............................ 1
WASHER/DRYER SAFETY .............................. 2
WASHER USE .................................................. 4
DRYER USE ...................................................... 5
WASHER/DRYER CARE ................................. 6
WASHER TROUBLESHOOTING ..................... 8
DRYER TROUBLESHOOTING ...................... 10
WARRANTY .................................................... 11
AssistanceorService
If you need assistance or service, first see the "Troubleshooting"
section. Additional help is available by calling our Customer
Interaction Center at 1-800-253-1301 from anywhere in the
U.S.A., or write:
Whirlpool Corporation
Customer Interaction Center
553 Benson Road
Benton Harbor, MI 49022-2692
To order parts and accessories, call 1-800-442-9991 or visit our
website at www.whirlpool.com.
In Canada call: 1-800-461-5681 Monday to Friday 8:00 a.m. -
6:00 p.m. (EST). Saturday 8:30 a.m. - 4:30 p.m. (EST)or write:
Customer Interaction Center
Whirlpool Canada Inc.
1901 Minnesota Court
Mississauga, Ontario L5N 3A7
Please include a daytime phone number in your correspondence.
For installation and service in Canada, call: 1-800-807-6777 or
visit our website at www.whirlpool.com/canada.
ASSISTANCE OU SERVICE ........................... 12
SECURITE DE LA LAVEUSE/SECHEUSE....12
UTILISATION DE LA LAVEUSE ..................... 14
UTILISATION DE LA SECHEUSE .................. 16
ENTRETIEN DE LA LAVEUSE/SECHEUSE..17
DEPANNAGE LAVEUSE ................................. 19
DEPANNAGE SECHEUSE ............................. 21
GARANTIE ....................................................... 23
Keep this book and your sales slip together for future
reference. You must provide proof of purchase or installation
date for in-warranty service.
Write down the following information about your appliance to help
you obtain assistance or service if you ever need it. You will need
to know your complete model number and serial number. You can
find this information on the model and serial number label, located
at the top inside dryer door well.
Dealer name
Serial number
Address
Phone number
Model number
Purchase date
3406881
WASHER/DRYERSAFETY
Your safety and the safety of others are very important.
We have provided many important safety messages in this manual and on your appliance. Always read and obey all safety
messages.
This is the safety alert symbol.
This symbol alerts you to potential hazards that can kill or hurt you and others.
All safety messages will follow the safety alert symbol and either the word "DANGER" or "WARNING."
These words mean:
You can be killed or seriously injured if you don't immediately
follow instructions.
You can be killed or seriously injured if you don't follow
instructions.
All safety messages will tell you what the potential hazard is, tell you how to reduce the chance of injury, and tell you what can
happen if the instructions are not followed.
WARNING: For your safety, the information in this manual must be followed to minimize
the risk of fire or explosion, or to prevent property damage, personal injury, or death.
- Do not store or use gasoline or other flammable vapors and liquids in the vicinity of this
or any other appliance.
- WHAT TO DO IF YOU SMELL GAS:
• Do not try to light any appliance.
• Do not touch any electrical switch; do not use any phone in your building.
• Clear the room, building, or area of all occupants.
• Immediately call your gas supplier from a neighbor's phone. Follow the gas supplier's
instructions.
• If you cannot reach your gas supplier, call the fire department.
- Installation and service must be performed by a qualified installer, service agency, or
the gas supplier.
iMPORTANT SAFETY iNSTRUCTiONS
WARNmNG:To reduce the riskof fire, electric shock, or injury to persons when using the washer/dryer, follow
basic precautions, including the following:
m Read a!I instructions before using the washer/dryer.
m Do not place items exposed to cooking oils in your dryer.
Htemscontaminated with cooking oils may contribute to a
chemical reaction that could cause a load to catch fire.
m Do not wash or dry articles that have been previously
cleaned in, washed in, soaked in, or spotted with gasoline,
dry-cleaning solvents, other flammable, or explosive
substances as they give off vapors that could ignite or
explode.
m Do not add gasoline, dry-cleaning solvents, or other
flammable, or explosive substances to the wash water.
These substances give off vapors that could ignite or
explode.
m Do not allow children to play on or in the washer/dryer.
Close supervision of children is necessary when the
washer/dryer is used near children.
m Before the washer/dryer is removed from service or
discarded, remove the doors to the washer/dryer
compartments.
m Do not reach into the washer/dryer if the tub, agitator or
drum is moving.
m Do not install or store the washer/dryer where it will be
exposed to the weather.
m Do not tamper with controls.
m Clean dryer lint screen before or after each load.
_=Under certain conditions, hydrogen gas may be produced
in a hot water system that has not been used for 2 weeks
or more. HYDROGEN GAS IS EXPLOSIVE. If the hot water
system has not been used for such a period, before using
the washing machine, turn on all hot water faucets and let
the water flow from each for several minutes. This will
release any accumulated hydrogen gas. As the gas is
flammable, do not smoke or use an open flame during
this time.
_=Do not repair or replace any part of the washer/dryer or
attempt any servicing unless specifically recommended in
this Use and Care Guide or in published user-repair
instructions that you understand and have the skills to
carry out.
_=Do not use fabric softeners or products to eliminate static
unless recommended by the manufacturer of the fabric
softener or product.
_=Do not use heat to dry articles containing foam rubber or
similarly textured rubber-Iike materials.
_=Keep area around the exhaust opening and adiacent
surrounding areas free from the accumulation of lint, dust,
and dirt.
_=The interior of the machine and dryer exhaust vent should
be cleaned periodically by qualified service personnel.
_=See "Electrica! Requirements" section for grounding
instructions.
SAVE THESE _NSTRUCT_ONS
Your dryer must be properly installed and vented to achieve
maximum drying efficiency and shorten drying times. Use the
minimum recommended installation clearances (found in your
Installation Instructions) to avoid blocking the flow of combustion
and ventilation air. See the Installation Instructions for more
information.
Fire Hazard
Use a heavy metam vent.
Do not use a pmastic vent.
Do not use a meta_ foil vent.
Failure to follow these instructions can result in death
or fire.
If the dryer is not properly installed and vented, it will not be
covered under the warranty.
NOTE: Service calls caused by improper venting will be paid for
by the customer, whether it was a paid installation or self-
installed.
1. Do not use plastic vent or metal foil vent. Use 4 in. (10.2 cm)
metal or flexible metal vent. Do not kink or crush flexible metal
vent. It must be completely extended to allow adequate
exhaust air to flow. Check vent after installation. Refer to your
Installation Instructions for proper length requirements of vent.
2. Use a 4 in. (10.2 cm) exhaust hood.
3. Use the straightest path possible when routing the vent.
4,
Use clamps to seal all joints. Do not use duct tape, screws or
other fastening devices that extend into the interior of the vent
to secure vent.
5.
Clean exhaust vent periodically, depending on use, but at
least every 2 years, or when installing your dryer in a new
location. When cleaning is complete, be sure to follow the
Installation Instructions supplied with your dryer for final
product check.
WASHERUSE
For these suggested full-sized loads, set the LOAD SIZE selector to the highest load size setting.
LARGE CAPACITY WASHERS
Heavy Work Mixed Load Towels Delicates Permanent Knits
Clothes 2 double sheets 8 bath towels 2 camisoles Press 2 pair of pants
2 pair of pants 4 pillowcases 8 hand towels 4 slips 1 double sheet 2 blouses
3 shirts 6 T-shirts 10 washcloths 6 undergarments 1 tablecloth 4 shirts
3 jeans 6 pair of shorts 1 bath mat 2 sets of sleepwear 1 dress 4 tops
1 coverall 2 shirts 1 child's outfit 1 blouse 2 dresses
2 blouses 2 pair of pants
6 handkerchiefs 3 shirts
2 pillowcases
COMPACT WASHERS
Heavy Work Mixed Load Towels Delicates Permanent Knits
Clothes 1 pair of pants 9 bath towels 1 camisole Press 2 pair of pants
2 pair of pants 2 pillowcases -or- 2 slips 6 shirts 2 shirts
3 shirts 2 shirts 6 bath towels 4 undergarments -or- -or-
1 T-shirt 3 hand towels 1 set of sleepwear 2 double sheets 3 dresses
6 washcloths 1 half slip 2 pillowcases
-or-
2 single sheets
2 pillowcases
Fire Hazard
Never place items in the washer that are dampened
with gasoline or other flammable fluids.
No washer can compmetemyremove oil
Do not dry anything that has ever had any type of oim on
it (including cooking oils).
Doing so can reeumt in death, explosion, or fire.
1. Measure detergent and pour it into the washer. If desired, add
powdered or liquid color safe bleach. Drop a sorted load of
clothes loosely into your washer.
• Load evenly to maintain washer balance. Mix large and
small items. Items should move easily through the wash
water. Overloading can cause poor cleaning.
2. (OPTIONAL) Add Liquid Chlorine Bleach.
Always measure liquid chlorine bleach. Do not guess. Never
use more than 1 cup (250 mL) for a full load. Follow
manufacturer's directions for safe use. Use a cup with a
pouring spout to avoid spilling.
Emectrical Shock Hazard
Plug into a grounded 3 prong outmet.
Do not remove ground prong.
Do not use an adapter.
Do not use an extension cord.
Failure to follow these instructions can result in death,
fire, or emectrica_ shock,
Let the washer fill and begin agitating the load. Add bleach to
the wash cycle so it can be removed in the rinse cycle. Pour
bleach around the agitator, not directly onto the load.
• Follow directions on the care labels. Do not use chlorine
bleach on wool, silk, spandex, acetates, or some flame-
retardant fabrics.
NOTE: Undiluted bleach will damage any fabric it touches.
The damage appears as rips, holes, tears, or color loss and
may not show up until several washings later.
3=
(OPTIONAL) Add liquid fabric softener.
NOTE: Your washer/dryer does not come with afabric
softener dispenser installed.
Tofind out whether your model allows fabric softener
dispenser usage and for ordering information, refer to the front 4.
page of your manual or call the dealer from whom you
purchased your washer/dryer. Ask for Part Number 3350834. 5.
NOTE: Do not spill or drip any fabric softener onto the clothes.
Undiluted fabric softener can stain fabrics. Always dilute fabric
softener with warm water. Too much fabric softener can make
some items (diapers and towels) nonabsorbent. If this 6.
happens, do not use it in every load, or use less of it in each
load.
Style 1: With Liquid Fabric Softener dispenser (on some
models)
• Use only liquid fabric softener in this dispenser. Pour
measured liquid fabric softener into the dispenser.
Softener is added automatically during the rinse portion of
the cycle. Dilute liquid fabric softener by filling the
dispenser with warm water until liquid reaches the
crossbar in the dispenser opening.
Style 2: Without Liquid Fabric Softener dispenser (on some
models)
• In the final rinse ONLY, add fabric softener that has been
diluted with 1/2to 1 cup (125 to 250 mL) warm water.
Close the washer lid. Washer will not agitate or spin with the
lid open.
Turn the LOAD SIZE selector to the correct setting for your
wash load and the type of fabric being washed. You may
change the load size or water level selection after the washer
has started filling by turning the selector to a different setting.
Set the TEMPERATURE selector to the correct setting for the
type of fabric and soils being washed. Use the warmest water
safe for fabric. Follow garment label instructions.
NOTE: In wash water temperatures colder than 70°F (21°C),
detergents do not dissolve well. Soils can be difficult to
remove. Some fabrics can retain wear wrinkles and have
increased pilling (the formation of small lint-like balls on the
surface of garments).
Push in the Cycle Control knob and turn it clockwise to the
wash cycle you want. Reduce the wash time when using a
small load size setting. Pull out the Cycle Control knob to start
the washer.
To stop or restart your washer:
• To stop the washer at any time, push in the Cycle
Control knob.
• To restart the washer, close the lid (if open) and pull out the
Cycle Control knob.
DRYERUSE
Load clothes loosely into the dryer. Do not pack the dryer. Allow space for clothes to tumble freely. The following charts show examples
of balanced loads that would allow for proper tumbling.
LARGE CAPACITY DRYER
Heavy Work Mixed Load Towels Delicates Permanent Press Knits
Clothes 2 double sheets 8 bath towels 2 camisoles 1 double sheet 2 pair of pants
2 pair of pants 4 pillowcases 8 hand towels 4 slips 1 tablecloth 2 blouses
3 pair of jeans 6 T-shirts 10 washcloths 6 undergarments 1 dress 4 shirts
1 coverall 6 pair of shorts 1 bath mat 2 sets of sleepwear 1 blouse 4 tops
3 shirts 2 blouses 1 child's outfit 2 pair of pants 2 dresses
Heavy Work Mixed Load Towels Delicates Permanent Press Knits
Clothes 1 pair of pants 9 bath towels 1 camisole 6 shirts 2 pair of pants
2 pair of pants 2 pillowcases -or- 2 slips -or- 2 shirts
3 shirts 1 T-shirt 6 bath towels 7 undergarments 2 double sheets -or-
6 handkerchiefs 3 shirts
2 shirts 2 pillowcases
COMPACT DRYER
2 shirts 3 hand towels 1 set of sleepwear 2 pillowcases 3 dresses
6 washcloths -or-
2 single sheets
2 pillowcases
ExplosionHazard
Keepflammablematerialsandvapors,suchas
gaeoline_awayfromdryer.
Donotdryanythingthathaseverhadanything
flammabteonit(evenafterwashing).
Failuretofollowtheseinstructionscanresultindeath,
explosion, or fire.
Fire Hazard
No washer can completely remove oil.
Do not dry anything that has ever had any type of oi on
it (including cooking oils).
_tems containing foam, rubber, or plastic must be dded
on a clotheaine or by using an Air Cycle.
Falure to folow these instructions can result in death
or fire.
This booklet covers several different models. Your dryer may not
have all of the cycles and features described.
Before using your dryer, wipe the dryer drum with a damp cloth to
remove dust from storing and shipping.
1. Load clothes loosely into the dryer and close the door. Do not
pack the dryer. Allow space for clothes to tumble freely.
2. Turn the Cycle Control knob to the recommended cycle for the
type of load being dried. Use the Energy Preferred Automatic
Setting to dry most heavy to medium weight fabrics.
3. (OPTIONAL) Your dryer may have an END OF CYCLE SIGNAL.
The signal is helpful when drying items that should be
removed from the dryer as soon as it stops. The End of Cycle
signal is part of the Start button and is selectable. Turn the
Start button to ON or OFR The signal will sound only if the
selector is set to On.
WASHER/DRYERCARE
Use a soft, damp cloth or sponge to wipe up any spills such as
detergent or bleach from the outside of your washer.
Clean your washer interior by mixing 1 cup (250 mL) of chlorine
bleach and 2 cups (500 mL) of detergent. Pour this mixture into
your washer and run it through a complete cycle using hot water.
Repeat this process if necessary.
Remove any hard water deposits using only cleaners labeled as
washer safe.
Cleaning the liquid fabric softener dispenser (on some
models):
1. Remove dispenser by grasping top with both hands and
squeezing, while pushing upward with thumbs.
2. Rinse dispenser under a warm water faucet, then replace it.
NOTE: Ifyour model has a liquid fabric softener dispenser, do not
wash clothes with this dispenser removed. Do not add detergent
or bleach to this dispenser; it is for liquid fabric softener only.
Replace inlet hoses after 5 years of use to reduce the risk of hose
failure. Periodically inspect and replace inlet hoses if bulges,
kinks, cuts, wear or leaks are found.
When replacing your inlet hoses, mark the date of replacement on
the label with a permanent marker.
4. If desired, add a fabric softener sheet. Use only ones labeled
as dryer safe. Follow package instructions.
5. Press the PUSH TO START button.
Stopping and Restarting
You can stop your dryer anytime during a cycle.
To stop your dryer
Open the dryer door or turn the Cycle Control knob to OFE
NOTE: The Cycle Control knob should point to an Off area when
the dryer is not in use.
To restart your dryer
Close the door. Select a new cycle and temperature (if desired).
Press the PUSH TO START button.
Keep dryer area clear and free from items that would obstruct the
flow of combustion and ventilation air.
Explosion Hazard
Keep flammable materiaBs and vapors, such as
gasoine, away from dryer.
Place dryer at least 18 inches (46 cm) above the floor
for a garage instalation.
Failure to do so can result in death, explosion, or fire.
Cleanthelintscreenbeforeeachload.Ascreenblockedbylint
canincreasedryingtime.
IMPORTANT:
• Do not run the dryer with the lint screen loose, damaged,
blocked, or missing. Doing so can cause overheating and
damage to both the dryer and fabrics.
• If lint falls off the screen into the dryer during removal, check
the exhaust hood and remove the lint.
Every Load Cleaning
Style 1:
1. The lint screen is located inside the dryer on the back wall.
Pull out the lint screen and its cover.
2. Separate the cover and the screen by squeezing the screen
and pulling on the cover at the same time.
3. Roll lint off the screen with your fingers. Do not rinse or wash
screen to remove lint. Wet lint is hard to remove.
4. Put the lint screen and cover back together and push firmly
back into place.
Style 2:
1. The lint screen is located inside the dryer in the front door well.
Pull the lint screen straight up. Roll lint off the screen with your
fingers. Do not rinse or wash screen to remove lint. Wet lint is
hard to remove.
2. Push the lint screen firmly back into place.
As Needed Cleaning
1. Roll lint off the screen with your fingers.
2. Wet both sides of lint screen with hot water.
3. Wet a nylon brush with hot water and liquid detergent. Scrub
lint screen with the brush to remove residue buildup.
4. Rinse screen with hot water.
5. Thoroughly dry lint screen with a clean towel. Replace screen
in dryer.
1. Apply a non-flammable household cleaner to the stained area
of the drum and rub with a soft cloth until stain is removed.
2. Wipe drum thoroughly with a damp cloth.
3. Tumble a load of clean cloths or towels to dry the drum.
NOTE: Garments which contain unstable dyes, such as denim
blue jeans or brightly colored cotton items, may discolor the dryer
interior. These stains are not harmful to your dryer and will not
stain future loads of clothes. Dry unstable dye items inside-out to
prevent dye transfer.
Install and store your washer/dryer where it will not freeze.
Because some water may stay in the hoses, freezing can damage
your washer/dryer. If storing or moving your washer/dryer during
freezing weather, winterize it.
To winterize washer/dryer
1. Shut off both water faucets. Disconnect and drain water inlet
hoses. Put 1 qt (1 L) of R.V.-type antifreeze in the basket.
2. Run washer on a drain and spin setting for about 30 seconds
to mix the antifreeze and water.
3. Unplug washer/dryer or disconnect power.
To use washer/dryer again
1. Flush water pipes and hoses. Reconnect water inlet hoses.
Turn on both water faucets.
2. Plug in washer/dryer or reconnect power.
3. Run the washer through a complete cycle with 1 cup (250 mL)
of detergent to clean out antifreeze.
Non-use or vacation care
Operate your washer/dryer only when you are at home. If you will
be on vacation or not using your washer/dryer for an extended
period of time, you should:
• Unplug washer/dryer or disconnect power.
• Turn off the water supply to the washer. This helps avoid
accidental flooding (due to a water pressure surge) while you
are away.
To transport the washer/dryer
1. Shut off both water faucets. Disconnect and drain water inlet
hoses. Place the inlet hoses in the basket.
2. If washer/dryer will be moved during freezing weather, put in a
qt (1 L) of R.V.-type antifreeze in the basket. Run washer on a
spin setting for about 30 seconds to mix the antifreeze and
water.
3. Disconnect the drain from the drain system.
4. Unplug washer/dryer or disconnect power.
5. Disconnect the exhaust vent.
6. If your washer/dryer is a gas model, close shutoff valve in gas
supply line, disconnect gas supply line pipe and remove
fittings attached to the washer/dryer pipe.
7. Wash lint screen.
8. Drape the power cord and drain hose over edge and into the
basket.
9. Make sure leveling legs are secure. Use masking tape to
secure the washer lid and dryer door.
Reinstalling your washer/dryer
From Inside the Dryer Cabinet
Lint should be removed every 2 years, or more often, depending
on dryer usage. Cleaning should be done by a qualified person.
From Inside the Exhaust Vent
Lint should be removed every 2 years, or more often, depending
on dryer usage.
1. Follow the "Installation Instructions" to locate, level, and
connect the washer/dryer.
2. Run the washer through the Normal cycle with 1 scoop or cap
full of detergent to clean the washer and remove the
antifreeze, if used.
WASHERTROUBLESHOOTING
Firsttry the solutions suggested here and possibly avoid the cost of a service call...
Noisy
• Is the load balanced and the washer/dryer level? The wash
load should be balanced and not overloaded. The washer/
dryer must be level. The front feet should be properly installed
and the nuts tightened. Reset the rear leveling legs (if needed).
See the Installation Instructions.
• Did you completely remove the yellow shipping strap with
cotter pins? See the Installation Instructions.
• Are the gears engaging after the drain and before spin, or
is the upper part of agitator clicking during the wash
cycle? These are normal washer noises.
Leaking
• Check the following:
Are the fill hoses tight?
Are the fill hose washers properly seated?
Is the drain hose clamp properly installed? See the Installation
Instructions.
Is the sink or drain clogged? Sink and standpipe must be
able to handle 17 gal. (64 L) of water per minute.
Is water deflecting off the tub ring or the load? Center the
tub before starting the washer. The wash load should be
balanced and not overloaded. The fill or spray rinses can
deflect off the load. The washer/dryer must be level. Ensure
that the leveling legs are properly installed. See the Installation
Instructions.
• Check household plumbing for leaks.
Washer stops, won't fill, rinse or agitate
• Check the following:
Is the power cord plugged into a grounded 3 prong outlet?
Is the indicator on the Cycle Control knob properly lined up
with a cycle? Turn the Cycle Control knob to the right slightly
and pull to start.
Are the water inlet valve screens clogged?
Are both the hot and cold water faucets turned on?
Is the water inlet hose kinked?
Does the water level seem too low, or does the washer
appear to not fill completely? The top of the agitator is much
higher than the highest water level. This is normal and
necessary for clothes to move freely.
Is there power at the plug? Check your electrical source or
call an electrician.
Has a fuse blown or is the circuit breaker open? If problem
continues, call an electrician.
Are you using an extension cord? Do not use an extension
cord.
Is the washer in a normal pause in the cycle? The washer
pauses for about 2 minutes during certain cycles. Allow the
cycle to continue. Some cycles feature periods of agitation
and soak.
Is the washer overloaded? Wash smaller loads.
Is the lid open? The lid must be closed during operation.
Washer will not agitate or spin with the lid open.
Basket crooked
• Was the washer basket pulled forward during loading?
Push the basket to the center before starting wash.
• Is the load balanced and the washer/dryer level? The wash
load should be balanced and not overloaded. The washer/
dryer must be level. Ensure that the leveling legs are properly
installed. See the Installation Instructions.
• The washer basket moves while washing. This is normal.
Agitator operation
• The top of the agitator is loose, or moves in only one
direction. This is normal.
Dispenser clogged (on some models)
• Did you follow the manufacturer's directions when adding
fabric softener to the dispenser (on some models)?
Measure fabric softener and carefully pour into the dispenser.
Wipe up all spills. Dilute fabric softener in the fabric softener
dispenser.
Washer won't drain or spin
• Is the drain hose clogged, or the end of the drain hose
more than 96 in. (244 cm) above the floor? See the
Installation Instructions for proper installation of drain hose.
• Is the lid open? The lid must be closed during operation.
Washer will not agitate or spin with the lid open.
• Is there excessive sudsing? Always measure detergent.
Follow manufacturer's directions. If you have very soft water,
you may need to use less detergent.
• Is your voltage low? Check your electrical source or call an
electrician. Do not use an extension cord.
Washer continues to fill or drain, cycle seems stuck
• Is the top of drain hose lower than the water level in
washer? The top of the hose must be higher than the water
level in the washer for proper operation. See the Installation
Instructions.
Does the drain hose fit too tightly inthe standpipe, or is it
taped to the standpipe? The drain hose should be loose yet
fit securely. Do not seal the drain hose with tape. The hose
needs an air gap. See the Installation Instructions.
Loading...