Whirlpool YGR556LRKB0, YGR556LRKP0, YGR556LRKP1, YGR556LRKS0, YGR556LRKS1 Owner’s Manual

...
PO_ TMELECTRIC
REFRIGERATED
RANGE
For questions about features, operation/performance
parts, accessories or service, call: f-800-253-1301.
In Canada, call for assistance 1-800-461-5681, for installation
Table of Contents ................................................. 2
and service, call: 1-800-807-6777
or visit our website at...
9755084
Models GR556, YGR556
TABLEOFCONTENTS
RANGE SAFETY ............................................................................. 2
The Anti-Tip Bracket .................................................................... 3
PARTS AND FEATURES ................................................................ 5
COOKTOP USE .............................................................................. 6
Cooktop Controls ......................................................................... 6
ACCUSIMMER TM Feature ............................................................ 6
Dual Cooking Zone ...................................................................... 6
Ceramic Glass .............................................................................. 6
Home Canning ............................................................................. 7
Cookware ..................................................................................... 7
ELECTRONIC OVEN CONTROL ................................................... 8
Display .......................................................................................... 8
Start .............................................................................................. 8
Stop Cancel .................................................................................. 8
Clock ............................................................................................ 8
Tones ............................................................................................ 8
Fahrenheit and Celsius ................................................................. 9
Timer ............................................................................................. 9
Control Lock ................................................................................. 9
12-Hour Shutoff ............................................................................ 9
Oven Temperature Control .......................................................... 9
OVEN USE ....................................................................................... 9
Aluminum Foil............................................................................... 9
Positioning Racks and Bakeware .............................................. 10
Bakeware .................................................................................... 10
Meat Thermometer ..................................................................... 10
Oven Vent with Removable Deflector ........................................ 10
Oven Door Vent .......................................................................... 11
REFRIGERATED OVEN USE ....................................................... 11
Cool Function ............................................................................. 11
Sequence Programming ............................................................ 11
Bake ............................................................................................ 12
Broil ............................................................................................. 12
Convection Cooking ................................................................... 13
Convection Baking ..................................................................... 13
Warm Hold Feature .................................................................... 14
Timed Cooking ........................................................................... 15
RANGE CARE ............................................................................... 15
Self-Cleaning Cycle .................................................................... 15
General Cleaning ........................................................................ 16
Oven Light .................................................................................. 17
Oven Door .................................................................................. 17
TROUBLESHOOTING .................................................................. 18
ASSISTANCE OR SERVICE ......................................................... 19
WAR RANTY .................................................................................. 20
RANGESAFETY
Your safety and the safety of others are very important.
We have provided many important safety messages in this manual and on your appliance. Always read and obey all safety messages.
This symbol alerts you to potential hazards that can kill or hurt you and others. All safety messages will follow the safety alert symbol and either the word "DANGER" or
This is the safety alert symbol. "WARNING." These words mean:
You can be killed or seriously injured if you don't immediately follow instructions.
You can be killed or seriously injured if you don't
follow instructions.
All safety messages will tell you what the potential hazard is, tell you how to reduce the chance of injury, and tell you what can happen if the instructions are not followed.
The range will not tip during normal use. However, the range can tip if you apply too much force or weight to the open door without the
anti-tip bracket fastened down properly.
Tip Over Hazard
A child or adult can tip the range and be killed. Connect anti-tip bracket to rear range foot.
Reconnect the anti-tip bracket, if the range is moved. See the installation instructions for details.
Failure to follow these instructions can result in death or serious burns to children and adults.
Anti-Tip Bracket
Making sure the anti-tip bracket is installed:
Slide range forward.
Look for the anti-tip bracket securely attached to floor.
Slide range back so rear range foot is under anti-tip bracket.
Range Foot
The California Safe Drinking Water and Toxic Enforcement Act requires the Governor of California to publish a Hst of substances known to the State of California to cause cancer, birth defects, or other reproductive harm, and requires businesses to warn of potentiaU exposure to such substances,
WARNUNG: This product contains a chemicaU known to the State of California to cause cancer, birth defects, or other reproductive harm,
This appliance can cause UowqeveUexposure to some of the substances Hsted, incUuding benzene, formaUdehyde, carbon monoxide, and toUuene,
iMPORTANT SAFETY iNSTRUCTiONS
WARNUNG: To reduce the risk of fire, ebctrbaI
shock, injury to persons, or damage when using the range, follow basic precautions, including the
following:
w WARNING: TO REDUCE THE RISK OF
TIPPING OF THE RANGE, THE RANGE MUST BE SECURED BY PROPERLY INSTALLED ANTI-TIP
DEVICES. TO CHECK IF THE DEVICES ARE INSTALLED PROPERD4 SLIDE RANGE FORWARD,
LOOK FOR ANTPTIP BRACKET SECURELY
ATTACHED TO FLOOR, AND SLIDE RANGE BACK SO REAR RANGE FOOT IS UNDER ANTFTIP
BRACKET.
m CAUTUON: Do not store items of interest to
children in cabinets above a range or on the back- guard of a range - cNdren climbing on the range to
reach items could be seriously injured.
m Proper Installation - Be sure the range is properly
installed and grounded by a qualified technician.
,, Never Use the Range for Warming or Heating the
Room.
,, Do Not Leave Children Alone - Children should not
be left alone or unattended in area where the range is in use. They should never be allowed to sit or
stand on any part of the range.
,, Wear Proper Apparel - Loose-fitting or hanging
garments should never be worn while using the range.
,, User Servicing - Do not repair or replace any part of
the range unless specifically recommended in the manual. All other servicing should be referred to a
qualified technician.
,, Storage in or on the Range - Flammable materials
should not be stored in an oven or near surface units.
,, Do Not Use Water on Grease Fires - Smother fire or
flame or use dry chemical or foam-type extinguisher.
,, Use Only Dry Potholders - Moist or damp
potholders on hot surfaces may result in burns from steam. Do not let potholder touch hot heating
ebments. Do not use a towel or other bulky cloth.
m DO NOT TOUCH SURFACE UNITS OR AREAS
NEAR UNITS - Surface units may be hot even
though they are dark in color. Areas near surface units may become hot enough to cause burns.
During and after use, do not touch, or let clothing or
other flammable materials contact surface units or areas near units until they have had sufficient time
to cool. Among those areas are the cooktop and surfaces facing the cooktop.
Use Proper Pan Size - The range is equipped with
one or more surface units of different size. Select
utensils having flat bottoms large enough to cover
the surface unit heating elemenL The use of under- sized utensils will expose a portion of the heating
element to direct contact and may result in ignition of clothing. Proper relationship of utensil to burner
will also improve efficiency.
Never Leave Surface Units Unattended at High Heat
Settings - Boilover causes smoking and greasy spillovers that may ignite.
Make Sure Reflector Pans or Drip Bowls Are in Place - Absence of these pans or bowls during
cooking may subject wiring or components under-
neath to damage. Protective Liners - Do not use aluminum foil to line
surface unit drip bowls or oven bottoms, except as suggested in the manual Improper installation of
these liners may result in a risk of electric shock, or fire.
Glazed Cooking Utensils - Only certain types of
glass, glass/ceramic, ceramic, earthenware, or other glazed utensils are suitable for range-top service
without breaking due to the sudden change in temperature.
Utensil Handles Should Be Turned Inward and Not Extend Over Adjacent Surface Units - To reduce the
risk of burns, ignition of flammable materials, and
spillage due to unintentional contact with the utensil, the handle of a utensil should be positioned so that
it is turned inward, and does not extend over
adjacent surface units.
Do Not Soak Removable Heating Elements - Heating elements should never be immersed in
water.
Do Not Cook on Broken Cooktop - Jfcooktop
should break, cleaning solutions and spillovers may
penetrate the broken cooktop and create a risk of
electric shock. Contact a qualified technician
immediately. Clean Cooktop With Caution - If a wet sponge or
cloth is used to wipe spills on a hot cooking area,
be careful to avoid steam burn. Some cleaners can produce noxious fumes if applied to a hot surface.
Use Care When Opening Door - Let hot air or
steam escape before removing or replacing food.
Do Not Heat Unopened Food Containers - Build-up
of pressure may cause container to burst and result
in injury.
SAVE THESE INSTF{UCTIONS
IMPORTANT SAFETY INSTRUCTIONS
Keep Oven Vent Ducts Unobstructed.
Placement of Oven Racks - Always place oven racks in desired location while oven is cool. If rack
must be moved while oven is hot, do not let potholder contact hot heating element in oven.
DO NOT TOUCH HEATING ELEMENTS OR INTERIOR SURFACES OF OVEN - Heating
elements may be hot even though they are dark in color. Interior surfaces of an oven become hot
enough to cause burns. During and after use, do
not touch, or let clothing or other flammable materials contact heating elements or interior
surfaces of oven until they have had sufficient time to cool. Other surfaces of the appliance may
become hot enough to cause burns - among these
surfaces are oven vent openings and surfaces near these openings, oven doors, and windows of oven
doors.
SAVE THESE INSTRUCTIONS
PARTSANDFEATURES
For self-cleaning ranges -
Do Not Clean Door Gasket - The door gasket is essential for a good seal. Care should be taken not
to rub, damage, or move the gasket.
Do Not Use Oven Cleaners - No commercial oven cleaner or oven liner protective coating of any kind
should be used in or around any part of the oven.
Clean Only Parts Listed in Manual.
Before Self-Cleaning the Oven - Remove broiler pan and other utensils.
For units with ventilating hood -
Clean Ventilating Hoods Frequently - Grease should
not be allowed to accumulate on hood or filter.
When flaming foods under the hood, turn the fan on.
Control Panel
Range
1
3
4
6
.......... 14
1.Left Rear Control Knob
2. Left Front Control Knob (Dual Cooking Zone)
3. Electronic Oven Control Display
4. Right Front Control Knob (ACCUSSIMER TM Feature)
5. Right Rear Control Knob
1. Back Guard
2. Oven Vent
3. Dual Element
4. Control Panel
5. Model and Serial Number Plate (located on bottom left side of control panel)
6. Oven Rack
7.Anti-Tip Bracket
13
8. Compressor (not consumer accessible)
9. Surface Cooking Area
10. Hot Surface Indicator Light 1!. Automatic Oven Light Switch
12. Oven Door Gasket
13. Broil Element (not shown)
14. Bake Element (not shown)
15. Self-Clean Latch
Parts and Features Not Shown
Oven Door Window Broiler Pan and Grid Roasting Rack
Oven Light Convection Fan
COOKTOPUSE
_ £ £_X@a££3£
Fire Hazard
Turn off all controls when done cooking. Failure to do so can result in death or fire.
The control knobs can be set anywhere between HI and LO. Push
in and turn to setting. Use the following chart as a guide when setting heat levels.
SETTING RECOMMENDED USE HI Start food cooking.
Bring liquid to a boil.
6-8 Hold a rapid boil. [MED- HI] Quickly brown or sear food.
5 Maintain a slow boil. [MED] Fry or saut_ foods.
Cook soups, sauces and gravies.
2-4 Stew or steam food. [MED- LO] Simmer.
The ACCUSIMMER feature setting is the right front surface cooking area or element, and it can be used as an adjustable heat setting for more precise simmering.
The indicator light will glow when the ACCUSIMMER feature setting is on. When the setting is not on, the right front surface cooking area or element will function as usual.
To Use:
1. Press the ACCUSIMMER feature button to turn on.
2. Push in and turn the right front control knob ON between the MAX and MIN settings. Select the MIN range for a low simmer or when using lids and the MAX range for a high simmer or when not using lids.
3. Press the ACCUSIMMER feature button again and turn the knob to OFF when finished cooking.
\
\\\\_. /
1.Single Size(6in. [15.2 cm])
2. Dual Size(10 in. [25.4 crn])
The Dual Cooking Zone offers flexibility depending on the size of the cookware. Single size can be used in the same way as a regular element. The dual size combines both the single and outer element and is recommended for larger size cookware.
To Use SINGLE:
1. Push in and turn the left front control knob counterclockwise from the OFF position to the SINGLE zone anywhere between
HI and LO.
2. Turn knob to OFF when finished cooking.
LO Keep food warm.
Melt chocolate or butter.
ACCUSIMMER TM Feature
MAX
MIN
Precise simmer control. High simmer or simmer without
lids. Low simmer or when using lids.
REMEMBER: When range is in use or (on some models) during the Self=Cleaning cycle, the entire
cooktop area may become hot,
To Use DUAL:
1. Push in and turn the left front control knob clockwise from the OFF position to the DUAL zone anywhere between HI and
LO.
2. Turn knob to OFF when finished cooking.
The surface cooking area will glow red when an element is on. It will cycle on and off, at all settings, to maintain the selected heat
level. It is normal for the surface of white ceramic glass to appear to
change color when surface cooking areas are hot. As the glass cools, it will return to its original color.
Wiping off the cooktop before and after each use will help keep it free from stains and provide the most even heating. For more information, see "General Cleaning" section.
Do not store jars or cans above the cooktop. Dropping a heavy or hard object on the cooktop could crack it.
Do not leave a hot lid on the cooktop. As the cooktop cools, air can become trapped between the lid and the cooktop, and the ceramic glass could break when the lid is removed.
Cleanupsugaryspillsandsoilsassoonashotsurface indicatorlightgoesoff.Ifnotwipedupwhilewarm,surface pittingcanoccur.
Donotslidecookwareorbakewareacrossthecooktop. Aluminumorcopperbottomsandroughfinisheson
cookwareorbakewarecouldleavescratchesormarksonthe cooktop.
Donotcookpopcorninprepackagedaluminumcontainers onthecooktop.Itcouldleavealuminummarksthatcannot beremovedcompletely.
Donotallowobjectsthatcouldmelt,likeplasticoraluminum foil,totouchanypartoftheentirecooktop.
Donotusethecooktopasacuttingboard. Usecookwareaboutthesamesizeasthesurfacecooking
area.Cookwareshouldnotextendmorethan1in.(2.5cm) outsidethearea.
1. Surface Cooking Area
2. Cookware/Canner
3. 1 in. (2.5 cm) Maximum Overhang
Use flat-bottomed cookware for best heat conduction and energy efficiency. Cookware with rounded, warped, ribbed or
dented bottoms could cause uneven heating and poor cooking results.
Determine flatness by placing the straight edge of a ruler across the bottom of the cookware. While rotating the ruler, no space or light should be visible between it and the
cookware. Cookware designed with slightly indented bottoms or small
expansion channels can be used. Make sure the bottoms of pots and pans are clean and dry
before using them. Residue and water can leave deposits when heated.
Do not cook foods directly on the cooktop.
Hot Surface Indicator Light (under ceramic glass)
The hot surface indicator light will glow as long as any surface
cooking area is too hot to touch, even after the surface cooking area(s) is turned off.
When canning for long periods, alternate the use of surface cooking areas, elements or surface burners between batches. This allows time for the most recently used areas to cool.
Center the canner on the grate or largest surface cooking area or element. Canners should not extend more than 1 in.
(2.5 cm) outside the cooking area.
Do not place canner on two surface cooking areas, elements or surface burners at the same time.
On ceramic glass models, only use flat-bottomed canners. For more information, contact your local U.S. Government
Agricultural Department Extension Office. In Canada, contact Agriculture Canada. Companies that manufacture home canning products can also offer assistance.
IMPORTANT: Never leave empty cookware on a hot surface cooking area, element or surface burner.
Ideal cookware should have a flat bottom, straight sides, a well- fitting lid and the material should be of medium-to-heavy
thickness. Rough finishes may scratch the cooktop. Aluminum and copper
may be used as a core or base in cookware. However, when used as a base it can leave permanent marks on the cooktop or grates.
Cookware material is a factor in how quickly and evenly heat is transferred, which affects cooking results. A non-stick finish has the same characteristics as its base material. For example,
aluminum cookware with a non-stick finish will take on the properties of aluminum.
Use the following chart as a guide for cookware material characteristics.
COOKWARE CHARACTERISTICS
Aluminum Heats quickly and evenly.
Suitable for all types of cooking.
Medium or heavy thickness is best for
most cooking tasks.
Cast iron Heats slowly and evenly.
Good for browning and frying.
Maintains heat for slow cooking.
Ceramic or Follow manufacturer's instructions. Ceramic glass Heats slowly, but unevenly.
Ideal results on low to medium heat settings.
Copper Heats very quickly and evenly. Earthenware Follow manufacturer's instructions.
Use on low heat settings.
on-steel or cast iron
Stainless steel Heats quickly, but unevenly.
See stainless steel or cast iron.Porcelain enamel-
A core or base of aluminum or copper on
stainless steel provides even heating.
ELECTRONICOVENCONTROL
1 2 3 4
14
1. Sequence Programming
2. Electronic Oven Control Display
3. Oven Light
4. ACCUSIMMER TM Pad
13 12 11 10 9 8 7 6 5
5. Stop/Cancel 8. Timer Functions
6. Start 9. Hour/Minute Adjustment
7. Clock Set 10. Timed Cooking/Timed Cooling
Food Poisoning Hazard
Do not eat food in oven if "PF" shows on the electronic oven control display.
Doing so can result in food poisoning or
sickness.
When "PF" shows on the electronic oven control display, a power
failure has occurred and food in the oven may not be properly
cooled or fully cooked. In the case of a power failure, do not eat the food in the oven.
Press any pad and reset the Clock if needed. When power is first supplied to the appliance, "PF" and the
current time will appear on the display. Press any pad to clear "PF" from the display.
When the oven is not in use, the display shows the time of day. When performing a timed cook function, the display will show
either hours and minutes, or minutes and seconds.
1!. Auto Clean
12. Temperature Adjustment
13. Oven Functions
14. Cool Function
The STOP CANCEL pad stops any function except the Clock, Timer and Control Lock.
This is a 12-hour clock that shows a.m. and p.m. To Set:
Before setting, make sure the oven and Timer are off.
1. Press CLOCK SET.
2. Press the HR or MIN "up" or "down" arrow pads to set the time of day, including a.m. or p.m.
3. Press CLOCK SET or START.
Tones are audible signals, indicating the following: One tone
Valid pad press
Oven is preheated (long tone)
Function has been entered
The START pad begins any oven function. If not pressed within 5
seconds after pressing a function pad, the "START?" indicator light will flash as a reminder. On some models, "START?" will appear on the display.
If not pressed within 5 minutes after pressing a function pad, the oven display will return to the time of day mode and the programmed function will be canceled.
Three tones
Invalid pad press
Four tones
End-of-cycle
Reminder, repeating each minute after the end-of-cycle tones
Reminder Tones: Reminder tones may be turned off. Press and hold STOP TIME for 5 seconds. "rEP OFF" will appear in the display. Repeat to turn reminder tones back on, and "rEP on" will appear in the display.
All Tones: All of the above tones are preset on. All except the end-of-cycle tones can be turned off.
ToTurnOff/On: Press and hold START TIME for 5 seconds. A
tone will sound and "Snd OFF" will appear on the display. Repeat to turn tones on and "Snd on" will appear on the display.
Tone Pitch: The pitch is preset at high, but can be changed to
low.
To Change: Press and hold CONVECT BAKE for 5 seconds. A tone will sound and "Snd LO" will appear on the display. Repeat to change and "Snd Hi" will appear on display.
The temperature is preset at Fahrenheit, but can be changed to
Celsius.
To Change: Press and hold BROIL for 5 seconds. A tone will
sound and "°C" will appear on the display. Repeat to change back to Fahrenheit. To exit mode, press STOP CANCEL.
The Timer can be set in hours or minutes up to 12 hours and 59
minutes, and counts down the set time. The Timer does not start or stop the oven.
To Set:
1. Press TIMER SET. If no action is taken after 5 minutes, the display will return to the time of day mode.
2. Press the HR or MIN "up" or "down" arrow pads to set the length of time to cook.
3. Press START or TIMER SET. When the set time ends, end-of- cycle tones will sound, then, if enabled, reminder tones will
sound every minute.
4. Press TIMER OFF anytime to cancel the Timer. Remember, do not press the STOP CANCEL pad because
the oven will turn off.
To display the time of day for 5 seconds when the timer is
counting down, press CLOCK SET.
,, 4 - I
IMPORTANT: Do not use a thermometer to measure oven temperature because opening the oven door may cause burner
cycling to give incorrect readings. The oven provides accurate temperatures; however, it may cook
faster or slower than your previous oven, so the temperature calibration can be adjusted, It can be changed in Fahrenheit or
Celsius. A minus sign means the oven will be cooler by the displayed
amount. No sign means the oven will be warmer by the displayed amount. Use the following chart as a guide.
ADJUSTMENT °F COOKS FOOD
(ADJUSTMENT °C)
10°F (5°C) ...a little more
20°F (10°C) ...moderately more
30°F (15°C) ...much more
-10°F (-5°C) ...a little less
-20°F (-10°C) ...moderately less
-30°F (-15°C) ...much less
To Adjust Oven Temperature Calibration:
1. Press and hold BAKE for 5 seconds until the oven display shows the current calibration, for example "0°F CAL."
2. Press the TEMP '<up" or "down" arrow pad(s) to increase or to decrease the temperature in 10°F (5°C) amounts. The adjustment can be set between 30°F (15°C) and -30°F (-15°C).
3. Press START.
The Control Lock shuts down the control panel pads to prevent
unintended use of the oven. When the control is locked, only the ACCUSlMMER TM, CLOCK
SET, OVEN LIGHT and TIMER pads will function.
To Lock/Unlock Control: Before locking, make sure the oven
and Timer are off. Press and hold START for 5 seconds. A single
tone will sound and "Loc" will appear on the display.
Repeat to unlock. "Loc" will disappear from the display.
The oven control is set to automatically shut the oven off 12
hours after the oven turns on. This will not interfere with any
timed or delayed cook function. The oven light will come on when the oven door is opened. To
keep the light on continuously, turn the light on by pressing OVEN LIGHT.
To Override: For longer cooking periods that require oven usage
longer than 12 hours, press and hold CLOCK SET for 5 seconds.
A single tone will sound and "12H OFF" will appear on the
display. The oven will remain on until turned off.
To Reset: Press and hold CLOCK SET for 5 seconds. A single tone will sound and "12H on" will appear on the display.
OVENUSE
Odors and smoke are normal when the oven is used the first few times, or when it is heavily soiled.
IMPORTANT: The health of some birds is extremely sensitive to the fumes given off. Exposure to the fumes may result in death to certain birds. Always move birds to another closed and well
ventilated room.
IMPORTANT: Do not line the oven bottom with any type of foil, liners or cookware because permanent damage will occur to the
oven bottom finish.
Do not cover entire rack with foil because air must be able to move freely for best cooking results.
To catch spills, place foil on rack below dish. Make sure foil is at least 1 in. (2.5 cm) larger than the dish and that it is turned
up at the edges.
Do not cover food with aluminum foil when convection cooking (on some models).
i.._._,_.!_.__ _/_,_1_ _ _,_,__2_,_:_
IMPORTANT:Neverplacefoodorbakewaredirectlyontheoven doororbottom.Permanentdamagewilloccurtotheporcelain
finish.
RACKS Positionracksbeforeturningtheovenon.Donotmoveracks
withbakewareonthem.Makesureracksarelevel.Tomovea rack,pullitouttothestopposition,raisethefrontedge,thenlift
out.Usethefollowingillustrationandchartasaguide.
BAKEWARE/ RECOMMENDATIONS RESULTS
Insulated cookie Place in the bottom third of oven.
sheets or baking May need to increase baking time. pans
Little or no bottom
browning
Stainless steel
Light, golden crusts
Uneven browning
May need to increase baking time.
3
FOOD RACK POSITION
Frozen pies, large roasts, turkeys, angel 1 or 2 food cakes
Bundt cakes, most quick breads, yeast 2 breads, casseroles, meats
Cookies, biscuits, muffins, cakes, non- 2or 3 frozen pies
BAKEWARE
To cook food evenly, hot air must be able to circulate. Allow 2 in.
(5 cm) of space around bakeware and oven walls. Use the
following chart as a guide.
NUMBER OF POSITION ON RACK PAN(S)
1 Center of rack.
2 Side by side or slightly staggered.
Stoneware
Follow manufacturer's instructions.
Crisp crusts
Ovenproof glassware, ceramic
May need to reduce baking temperatures 25°F (15°C).
glassor ceramic
Brown, crisp
Crusts
On models without a temperature probe, always rely on a meat thermometer to determine doneness of meat and poultry. The internal temperature, not appearance, is what counts. A meat thermometer is not supplied with this appliance.
Insert the thermometer into the center of the thickest portion of the meat or inner thigh or breast of poultry. The tip of the thermometer should not touch fat, bone or gristle.
After reading the thermometer once, push it into the meat _/_in. (1.25 cm) more and read again. If the temperature drops, cook the meat or poultry longer.
Check all meat in two or three places.
J" 7 "
I 11 _I_II I, lllI l:l!emo_,IRl)l(l ;" .... ......
3 or 4 Opposite corners on each rack. Make sure that no
The bakeware material affects cooking results. Follow
manufacturer's recommendations and use the bakeware size recommended in the recipe. Use the following chart as a guide.
BAKEWARE/ RECOMMENDATIONS RESULTS
Light colored Usetemperature and time recommended
aluminum in recipe.
Light golden crusts
Even browning
Dark aluminum and other bakeware
with dark, dull and/ or non-stick finish
Brown, crisp crusts
bakeware piece is directly over another.
May need to reduce baking temperatures 25°F (15°O).
Use suggested baking time.
For pies, breads and casseroles, use temperature recommended in recipe.
Place rack in center of oven.
10
!. Removable Deflector
2. Oven Vent
The oven vent should not be blocked or covered, because the vent allows the release of hot air and moisture from the oven.
Doing so will cause poor air circulation, affecting cooking and cleaning results. Never set plastics, paper or other items that
could melt or burn near the oven vent. The oven vent has a removable porcelain enamel deflector to be
used during a Self-Clean Cycle. The deflector is used to reduce the possibility of staining. To ensure proper oven ventilation during any other oven function, remove the deflector from the
oven vent.
To Remove the Deflector:
1. Wait until deflector is cool.
2. Remove deflector. You may want to wear oven mitts while doing so.
J__ _ T% __,_ ,_"_7'.,,,_
!. Ovendoor vent
Hot air and moisture escape from the door vent during certain oven modes. Some condensation may occur, however this will not affect cooking performance.
REFRIGERATEDOVENUSE
The POLARA TM Electric Refrigerated Range combines the
convenience of a 30" freestanding electric self-cleaning range with an innovative refrigeration cooling system.
Both systems work together, giving you the flexibility to store
foods in the refrigerated range for up to 24 hours before a preset
cook time begins.
The Cool Function allows you to program a cool setting for a
maximum of 24 hours, and allows you to store your pre-prepared
food(s) at the same storage temperatures as those of your
refrigerator. Foods with beaten egg whites such as angel food cake and
souffles, foods with leavening agents or baking powder, or frozen meats and poultry are not suited to sequence cooking with a Cool Function at the beginning.
IMPORTANT: A 24-hour timer within the electronic oven control keeps track of the accumulated cooling time. Once the maximum
time has been reached, the COOL Function will be locked out.
Further cooling functions will be disabled until either 12 hours has elapsed with no cooling, or a cook function, such as preheat, has been accomplished.
6. Press START. "DELAY" and "COOL" will appear on the oven display. When the start time is reached, the oven will automatically begin to cool. When the stop time is reached, the oven will shut off automatically. "End" will appear on the display and end-of-cycle tones will sound.
7. Press STOP CANCEL to clear the display and/or stop reminder tones.
Use the following chart as guide when storing foods within the oven cavity.
COOL FUNCTION CHART
FOODS RECOMMENDATIONS
Breakfast Casserole Do not use warm sequence
Breakfast Rolls, Refrigerated Do not use warm sequence Dough after baking.
Chicken Breasts, Boneless, Cover with foil, brush with oil Skinless or shake with seasoned
Lasagna, Fresh Cover with foil.
Lasagna, Frozen Cover with foil.
Oven Stew Cover with lid or foil.
Roasts Cook uncovered or place in
Whole Chicken or Turkey Brush with oil or place in an
after baking.
Cool for no more than 12 hours uncovered.
Place in baking pan.
Cool for no more than 12 hours uncovered.
coating mix.
an oven bag.
oven bag.
To Set an Automatic Maximum 24 Hour Cool Function:
1. Press COOL. "COOL" will appear on the oven display. "START?" will appear on the oven display after 5 seconds.
When programming a COOL function as part of a sequence, COOL must be programmed as the first step. See "Sequence Programming" section for more information.
The preheat time may be longer if the oven was in a Cool Function mode prior to the beginning of the cook function. See "Bake" section for more information about preheating.
2. Press START.
3. Press STOP CANCEL at any time to clear function.
To Set a Delayed or Timed Cool Function:
1. Press COOL.
2. Press START TIME.
3. Press the HR and MIN "up" or "down" arrow pads to enter the time of day to start.
4. Press STOP TIME.
5. Press the HR and MIN "up" or "down" arrow pads to enter the time of day to end cooling.
Food Poisoning Hazard
Do not eat food in oven if "PF" shows on the electronic oven control display.
Doing so can result in food poisoning or sickness.
When "PF" shows on the electronic oven control display, a power failure has occurred and food in the oven may not be properly cooled or fully cooked.
In the case of a power failure, do not eat the food in the oven. Press any pad and reset the Clock if needed.
Sequence Programming allows you to program up to four cook functions at one time, and is usable with other electronic oven control functions, such as the Timer.
Sequence Programming takes precedence over any non- sequenced cook function. For example, if an untimed Bake function is in process and a sequence program is started, the untimed Bake function will be canceled, and the program sequence will start.
11
All steps of a sequenced program must be programmed with a
stop time. If a stop time is not entered for a step within the sequence program, and the FIRST STEP/NEXT STEP pad is pressed, three tones will sound indicating an invalid key press.
To Program the First Step of the Sequence:
1. Press FIRST STEP/NEXT STER "PROGRAM" and "STEP" will appear on the display. A
flashing "1" will also appear on the display, indicating that step 1 is being programmed.
2=
Choose the desired cook function. For example, press COOL.
3.
Press START TIME, then HR and MIN "up" or "down" arrow pads to set the time of day for the first cook function to begin.
If START TIME is not pressed, then the sequence of cook functions will begin immediately once programming is complete and START is pressed.
4.
Press STOP TIME, then HR and MIN "up" or "down" arrow pads to set the time of day for the first cook function to stop.
The display will show either the time of day (if start time was not programmed) or the start time (if same was programmed), but with a flashing colon. "Stop" and "Time" will also appear on the display.
NOTE: When programming a COOL function as part of a sequence, COOL must be programmed as the first step.
To Program Next Steps of the Sequence:
1. Press FIRST STEP/NEXT STER "PROGRAM" and "STEP" will appear on the display. The
number of the step being programmed will flash. "START" and "TIME will appear on the display.
2. Choose the desired cook function. For example, press BAKE.
3. Press TEMP "up" or "down" arrow pad (if desired) to select temperature.
4. Press STOP TIME, then HR and MIN "up" or "down" arrow pads to select stop time.
5. Press START to begin sequence once all steps haven been programmed.
6. Press STOP CANCEL at any time to clear program and to stop program.
Continue to repeat the steps above until up to all four cook
functions are programmed.
To Review/Modify Programmed Sequence:
If program steps are partially or completely programmed, and the sequence has not been started, the programmed cook functions
can be reviewed.
1. Press REVIEW STEPS. Step 1 will appear in the display Each subsequent press of REVIEW STEPS will cause display
of programmed steps in order. "STEP" and "RECALL" will appear on the display. The number of the displayed step will flash. A recalled step will remain lit on the display for 5
minutes if no further action is taken.
2=
If fewer than four steps have been programmed, press REVIEW STEPS repeatedly until the last programmed step is displayed, then press FIRST STEP/NEXT STEP if it is desired to program an additional step.
While a step is recalled, a cook function pad can be used to change the function, or the TEMPERATURE "up" or "down" arrow pad can be used to change the set temperature.
START TIME, when used with the HR or MIN "up" or "down" arrow pads, can be used to change, add or delete a delayed
start.
STOP TIME can be used to change the stop time. Changing the stop time of a step will automatically change the start times and stop times of all subsequent programmed cook
functions.
To Modify Sequence Programming:
1. Press UNDO. The last step of the sequence will be canceled. If the programmed sequence has not been started, see "To
Program Next Steps of the Sequence" section to program a step to replace the canceled cook function.
Press START. The first step will show on the display and the program sequence will begin.
Changes can be made to the STOP TIME during a programmed cook function. However, changes cannot be made after a programmed cook function has been completed.
If at any time during an active sequenced program FIRST STEP/NEXT STEP is pressed, three tones will sound.
ACCUBAKE ®DUO SYSTEM TM Temperature Management The ACCUBAKE DUO SYSTEM electronically regulates the oven
heat levels during preheat and bake to maintain the most uniform temperature control by utilizing 2 temperature sensors to independently control the bake and broil elements for optimal cooking results.
The bake and broil elements cycle on and off in intervals. The bake element will glow red when cycling on, the broil element will not. This feature is automatically activated when the oven is in
use. Before baking and roasting, position racks according to the
"Positioning Racks and Bakeware" section. When roasting, it is not necessary to wait for the oven preheat conditioning time to end before putting food in unless recommended in the recipe.
To Bake or Roast:
1. Press BAKE.
2. Press TEMP "up" or "down" arrow pad to set a temperature other than 350°F (175°C) in 5 ° amounts. The bake range can be set between 170°F and 500°F (75°C and 260°C).
3. Press START. The temperature can be changed after this step. START does not need to be pressed again.
4. Press STOP CANCEL when finished.
Preheating
After START is pressed, the oven will enter a timed preheat conditioning. "PrE" and the time countdown will appear on the display. When the preheat conditioning time ends, a tone will sound and the selected temperature will appear on the display.
Preheat temperatures are affected by varying factors such as room temperature and peak energy usage times. It is normal for the temperature showing on the display and the actual oven temperature to differ.
Waiting an additional 10 minutes after the preheat conditioning time ends to put food in the oven is suggested when baking foods with leavening ingredients, such as yeast, baking powder, baking soda and eggs.
Broiling uses direct radiant heat to cook food. Changing the temperature when Custom Broiling allows more precise control when cooking. The lower the temperature, the slower the cooking. Thicker cuts and unevenly shaped pieces of meat, fish and poultry may cook better at lower broiling temperatures.
12
Use only the broiler pan and grid provided with the range. It is designed to drain juices and help prevent spatter and smoke.
For proper draining, do not cover the grid with foil. The bottom of the pan may be lined with aluminum foil for easier cleaning.
Trim excess fat to reduce spattering. Slit the remaining fat on the edges to prevent curling.
Pull out oven rack to stop position before turning or removing food. Use tongs to turn food to avoid the loss of juices. Very thin cuts of fish, poultry or meat may not need to be turned.
After broiling, remove the pan from the oven when removing the food. Drippings will bake on the pan if left in the heated oven, making cleaning more difficult.
Before broiling, position rack according to Broiling Chart. It is not necessary to preheat the oven before putting food in unless recommended in the recipe. Position food on grid in the broiler pan, then place it in the center of the oven rack. Close the door to
the broil stop position to ensure proper broiling temperature.
To Broil:
1. Press BROIL.
2. Press START.
3. Press STOP CANCEL when finished.
BROILING CHART For best results, place food 3 in. (7cm) or more from the broil
element. Times are guidelines only and may need to be adjusted
for individual foods and tastes. Recommended rack positions are
numbered from the bottom (1)to the top (5). For diagram, see the "Positioning Racks and Bakeware" section.
COOK
RACK TIME
FOOD POSITION minutes
Side 1 Side 2
FOOD POSITION minutes
Chicken
bone-in pieces 3 17-20 17-20 boneless breasts 4 11-16 11-16
Fish Fillets V4- V2in. 4 8-10 4-5
(.6-1.25 cm) thick Steaks s/4- 1 in. 4 16-16 8-9
(2-2.5 cm) thick
* Place up to 9 patties, equally spaced, on broiler grid.
RACK TIME
COOK
Side 1 Side 2
In a convection oven, the fan-circulated hot air continually distributes heat more evenly than the natural movement of air in a
standard thermal oven. This movement of hot air maintains a consistent temperature throughout the oven, cooking foods more
evenly, crisping surfaces while sealing in moisture. Most foods can be cooked at lower cooking temperatures
25°F to 50°F (14°C to 28°C) and cooking time can be shortened by as much as 30 percent, especially for large turkeys and roasts.
It is important not to cover foods so that surface areas remain exposed to the circulating air, allowing browning and crisping.
Keep heat loss to a minimum by only opening the oven door when necessary.
Choose cookie sheets without sides and roasting pans with lower sides to allow air to move freely around the food.
Test baked goods for doneness a few minutes before the minimum cooking time with an alternative method such as a toothpick.
Use a meat thermometer or a temperature probe to determine the doneness of meats and poultry. Check the temperature of pork and poultry in two or three places.
Steak
1in. (2.5cm) thick
medium rare 4 14-15 7-8 medium 4 15-16 8-9 well done 4 18-19 9-10
*Ground meat patties s/4in. (2 cm) thick
well done 4 13-14 7-8
Pork chops
1 in. (2.5 cm) thick 4 20-22 10-11
Ham slice, precooked
V2in. (1.25 cm) thick 4 6-10 4-5
Frankfurters 4 5-7 3-4
Lamb chops
1 in. (2.5 cm) thick 4 14-17 8-9
During convection baking or roasting, the bake and broil elements cycle on and off in intervals to maintain the oven
temperature, while the fan constantly circulates the hot air. If the oven door is opened during convection baking or roasting,
the broil element and fan will turn off immediately and the bake element will turn off in 2 minutes. They will come back on once
the door is closed.
For optimal cooking results, do not use aluminum foil.
Reduce recipe temperature 25°F to 50°F (14°C to 28°C). The cook time may need to be reduced also.
To Convection Bake: Before convection baking or roasting, position the racks
according to the "Positioning Racks and Bakeware" section. When using two racks, place them on rack positions 2 and 4.
13
When roasting with CONVECT BAKE, use the roasting rack on
top of the broiler pan and grid. It is not necessary to wait for the
oven to preheat before putting food in, unless recommended in
the recipe.
t #
1. Roasting Rack
2. Broiler Grid
3. Broiler Pan
1. Press CONVECT BAKE.
2. Press the TEMP "up" or "down" arrow pads to enter a temperature other than 350°F (177°C). The convection bake
range can be set between 170°F and 500°F (77°C and 260°0).
3. Press START. A preheating time will count down on the display and "PrE"
will appear. The oven control automatically sets preheating time based on the oven temperature selected.
As the preheating time ends, the set temperature replaces "PrE" on the display. When the set temperature is reached, if
enabled, one tone will sound. The temperature settings can be changed any time after
pressing START. Changing the temperature will not change the preheat countdown time.
4. Press STOP CANCEL when finished cooking.
Use the following chart below when convection roasting meats and poultry.
tDo not stuff poultry when convection roasting.
CONVECTION ROASTING CHART
Food/Rack CookTime OvenTemp. Internal Food Position (minutes per Temp.
pound)
Beef, Rack Position 2
Food/Rack Cook Time Oven Temp. Internal Food Position (minutes per Temp.
Pork, Rack Position 2
Loin Roast 30-40 325°F (160°C) 160°F-170°F
(boneless) (71°C-75°C)
Shoulder 35-40 325°F (160°C) 160°F-170°F
Roast (71°C-75°C)
Ham, Rack Position 2
Fresh 25-35 300°F (145°C) 160°F (71°C) (uncooked)
Fully Cooked 15-20 300°F (145°C) 160°F (71°C)
Lamb, Rack Position 2
Leg, Shoulder Roast
medium
well done 25-30 300°F (145°C) 160°F (71°C)
tChicken, Rack Position 2
Whole 3-5 Ibs. 20-25 325°F (160°C) 180°F (82°C)
(1.5-2.2 kg)
5-7 Ibs. 15-20 325°F (160°C) 180°F (82°C)
(2.2-3.1 kg)
tTurkey, Rack Positions 1 or 2
13 Ibs. and 10-15 300°F (145°C) 180°F (82°C) under
(5.85 kg)
Over 13 Ibs. 10-12 300°F (145°C) 180°F (82°C)
(5.85 kg)
tCornish Game Hens, Rack Position 2 or 3
1-1.5 Ibs. 50-60 325°F (160°C) 180°F (82°C) (0.5-0.7 kg)
pound)
30-35 170°F (77°C)
Rib Roast rare 20-25 140°F (60°C) medium 25-30 300OF(145oc) 160°F (71°C)
well done 30-35 170°F (77°C)
Rib Roast (boneless)
rare 22-25 140°F (60°C) medium 27-30 300°F (145°C) 160°F (71°C)
well done 32-35 170°F (77°C)
Rump, Sirloin
Tip Roast
rare medium 20-25 140OF(60oc)
well done 25-30 300°F (145°C) 160OF(71oc)
Meat Loaf 30-35 170°F (77°C)
Veal, Rack Position 2
Loin, Rib, Rump Roast
medium
well done
20-25 325°F (160°C) 165OF(74oc)
25-35 325°F (160°C) 160°F (71°C) 30-40 170°F (77°C)
14
Warm Hold allows hot cooked foods to stay warm before serving. It can also be used at the end of a timed cook.
To Use Automatic Warm/Cool: At the end of a timed cook (either with or without a delayed start),
or at the end of a sequence program in which the last step is not the Warm Hold mode, the oven will automatically set a one hour warm hold at 170°F (77°C).
If the Warm Hold mode is not canceled at any time during the 1- hour period, it will immediately be followed by the Cool Function mode, which will operate for up through 24-hours or until the
function is canceled. The Cool Function mode will also occur at the end of a sequenced program which ends with a timed Warm
Function. See "Sequence Programming" section for more information.
When the cook time ends or the last step of the sequence is complete, the oven display will show a warming count down
time. When warming time ends and the oven control enters the Cool
Function mode, "COOL" will show on the oven display. The time of day will also show in the 4-digit display.
Loading...
+ 30 hidden pages