Whirlpool WVU7130JS0 Owner’s Manual

30" (76.2 CM) RANGE HOOD

Installation Instructions and Use & Care Guide

HOTTE DE 30" (76,2 CM)

Instructions d’installation et Guide d’utilisation et d’entretien

Table of Contents/Table des matières ..................................... 2

IMPORTANT: READ AND SAVE THESE INSTRUCTIONS. FOR RESIDENTIAL USE ONLY.

IMPORTANT : LIRE ET CONSERVER CES INSTRUCTIONS. POUR UTILISATION RÉSIDENTIELLE UNIQUEMENT.

LIB0138872A/W11374529A

TABLE OF CONTENTS

TABLE DES MATIÈRES

RANGE HOOD SAFETY .................................................................3

INSTALLATION REQUIREMENTS .................................................5

Tools and Parts .............................................................................5

Location Requirements ................................................................5

Venting Requirements ..................................................................6

Electrical Requirements ...............................................................8

INSTALLATION INSTRUCTIONS ...................................................8

Prepare Location ......................

Install Range Hood .....................................................................10

Make Electrical Connection .......................................................11

Complete Installation .................................................................11

RANGE HOOD USE ......................................................................12

Range Hood Controls ................................................................12

RANGE HOOD CARE ...................................................................12

Cleaning ..................................

WIRING DIAGRAM .......................................................................13

ASSISTANCE OR SERVICE .........................................................14

In the U.S.A. ...............................................................................14

In Canada ...................................................................................14

Accessories ................................................................................14

....................................................8

...................................................12

SÉCURITÉ DE LA HOTTE ............................................................1

EXIGENCES D’INSTALLATION ...................................................18

Outils et pièces ...........................................................................18

Exigences d’emplacement .........................................................18

Exigences concernant l’évacuation ...........................................19

..........................................................22

INSTRUCTIONS D’INSTALLATION .............................................22

Préparation de l’emplacement ...................................................22

Installation de la hotte ................................................................24

Raccordement électrique ...........................................................26

Terminer l’installation ..................................................................26

UTILISATION DE LA HOTTE .......................................................26

Commandes de la hotte de cuisinière .......................................26

ENTRETIEN DE LA HOTTE .........................................................27

Nettoyage .................

SCHÉMA DE CÂBLAGE ...............................................................28

ASSISTANCE OU DÉPANNAGE ..................................................29

Aux É.-U. ....................................................................................29

Au Canada ..................................................................................29

Accessoires ................................................................................29

..................................................................27

RANGE HOOD SAFETY

Your safety and the safety of others are very important.

We have provided many important safety messages in this manual and on your appliance. Always read and obey all safety messages.

This is the safety alert symbol.

This symbol alerts you to potential hazards that can kill or hurt you and others.

All safety messages will follow the safety alert symbol and either the word “DANGER” or “WARNING.”

These words mean:

You can be killed or seriously injured if you don't immediately

DANGER

WARNING

All safety messages will tell you what the potential hazard is, tell you how to reduce the chance of injury, and tell you what can happen if the instructions are not followed.

follow instructions.

You

can be killed or seriously injured if you don't

instructions.

IMPORTANT SAFETY INSTRUCTIONS

READ AND SAVE THESE INSTRUCTIONS

INSTALLATION REQUIREMENTS

(12.1 cm)

)

Tools and Parts

Gather the required tools and parts before starting installation.

here.

Tools needed

Drill

/4" (3.0 cm) drill bit

1/8" (3.0 mm) drill bit for pilot holes Pencil Wire stripper or utility knife Tape measure or ruler Caulking gun and weatherproof caulking compound Flat-blade screwdriver Phillips screwdriver Saber or keyhole saw Vent clamps Metal snips Compass or 8" (20.3 cm) circle template

Parts supplied

Remove parts from package. Check that all parts are included.

3 - 3.5 x 9.5 mm damper screws 4 - 4.5 x 13 mm mounting screws 2 - 3.5 x 9.5 mm mounting top/rear exhaust cover Top/rear exhaust cover 3¼" x 10" (8.3 x 25.4 cm) damper/vent connector T-20 Torx

Parts needed

3¼" x 10" (8.3 x 25.4 cm) or 6" (15.2 cm) or larger round

metal venting

6" (15.2 cm) or larger round damper, if using 6" (15.2 cm) or

larger round vent system

3¼" x 10" (8.3 x 25.4 cm) to 6" (15.2 cm) or larger diameter

transition piece if using 6" (15.2 cm) or larger diameter round vent system.

3 - UL listed wire connectors 1/2" (12.7 mm) UL Listed or CSA approved strain relief

For cabinets with recessed bottoms:

determined by recess dimensions.

† adapter

Location Requirements

IMPORTANT: Observe all governing codes and ordinances.

It is the installer’s responsibility to comply with installation

model/serial rating plate is located inside the range hood on the left wall.

Range hood location should be away from strong draft areas,

such as windows, doors and strong heating vents.

Cabinet opening dimensions that are shown must be used.

Given dimensions provide minimum clearance. Consult the cooktop/range manufacturer installation instructions before making any cutouts.

Grounded electrical supply is required. See “Electrical

Requirements” section.

The hood is factory-set for vented installations. All openings in ceiling and wall where range hood will be

installed must be sealed.

For Mobile Home Installations

The installation of this range hood must conform to the Manufactured Home Construction Safety Standards, Title 24 CFR, Part 328 (formerly the Federal Standard for Mobile Home Construction and Safety, title 24, HUD, Part 280) or when such standard is not applicable, the standard for Manufactured Home Installation 1982 (Manufactured Home Sites, Communities and Setups) ANSI A225.1/NFPA 501A*, or latest edition, or with local codes.

Product Dimensions

4³⁄4"

1³⁄4"

(4.4 cm)

³⁄4"

(2.0 cm)

29¹5⁄16 " (76.0 cm)

4¹⁄16 " (10.3 cm)

(22.9 cm)

1¹⁄2 "

(3.8 cm)

(50.8 cm)

20"

(2.5 cm

†®TORX is a registered trademark of Acument Intellectual Properties, LLC.

+ 11 hidden pages