Whirlpool WTC 3746 Product Sheet

A. Refrigerator Compartment

2. LED's lighting

3. Shelves / Shelf area

4. Multi-flow cold air system

5. Cooler compartment

6. Rating plate with commercial name
7a. Crisper divider

8. Egg tray

9. Reversibility kit

10. Separator

11. Door trays

B. Freezer Compartment

12. Area for freezing (with/without flap)

13. Area for storing frozen foods

14. Ice tray

15. Plastic shelf

16. Ice-cube tray

17. The freezer door trays for pizza or other frozen

products with a short storage time (2** storage
compartment)

Depending on the model the number and type of
accessories may vary.

C. Control panel and display

Anti-bacterial protection:

1. Filter in fan (depending on the model)

7. Crisper with antibacterial additives (depending

on the model)

18. Door seals

The crisper and the door seals are manufactured from
materials that inhibit bacterial growth.

Notes:

- All shelves and door trays are removable. Freezer plastic
shelf cannot be removed to have a good air flow rate
inside freezer compartment.

- The internal temperatures of the appliance depend on
the ambient temperature, frequency of opening the
doors, as well as location of the appliance. Temperature
setting must consider these factors.

- The appliance accessories are not suitable for washing in
dishwasher.

HOW TO START THE APPLIANCE

Fit the spacers (if supplied) on the
upper part of the condenser at the
rear of the appliance. When the
appliance is connected to the
power supply, the display lights up
and all the symbols appear on the
display for a few seconds.
The freezer factory setting -18°C appears and flashes,
while the refrigerator display shows a temperature of
+5°C (factory-set). While the appliance is working to
reach the factory-set temperature, an acoustic alarm
sounds and temperature symbol on the freezer display
flashes (- -). This indicates that the appliance has not yet
reached the optimal temperature for storage of foodstuffs.
Press and hold the button "Reset" until the acoustic alarm
disables.
The icon disappears when the freezer compartment
reaches a temperature below -12°C, the display will show
the temperature -18°C.
After being switched on, the refrigerator needs from 4 to
6 hours to reach the correct temperature to store a
typical volume of food in the refrigerator compartment.

Important:

•If food is placed in the refrigerator before the appliance
has cooled completely, it may deteriorate.

•Turning the refrigerator and freezer controls to a colder
than recommended setting will not cool the
compartments any faster.

•A built-in exterior moisture control continuously guards
against moisture build-up on the front edges.

Do not be alarmed if these edges sometimes feel warm to
the touch. The inside light switches on when the
refrigerator door is opened.
After 10 minutes of door opening the light switches off.

FAN WITH A BUTTON

The fan improves temperature distribution inside the
refrigerator compartment, allowing better preservation of
stored food. By default, the fan is ACTIVE.
It is advisable to keep the fan active, so that the "Fresh
Control" / "ProFresh" function can work and also when
the ambient air temperature is over 27 ÷ 28°C or if you
perceive drops of water on the glass shelves or in the
severe humidity conditions.

Note
Do not obstruct the air intake area with food items.
When Fresh Control / ProFresh is disabled
remember to turn off the fan when there is a lower
ambient air temperature.

To turn off the fan press the button (1a).
If the appliance has the fan it can be equipped with the
antibacterial filter.
Remove it from the box (found in the crisper drawer
(item 7) and insert into the cover of fan (item 1b).
The replacement procedure is attached with the filter.

PRODUCT SHEET

GB

ROBGRUSHSKCZPLIGB FINDKNSGRPENLFD

Downloaded from Fridge-Manual.com Manuals

CONTROL PANEL DESCRIPTION

Buttons:

1. Options button

2. Setting temperature in freezer compartment button

3. Appliance On-Stand-by button

4. Confirmation button

5. Setting temperature in fridge compartment button

6. Reset button.

Switching on the appliance: Press & hold for 3 sec. the

"On-Stand-by" button to activate the product.

Switching off the appliance: Press & hold for 3 sec. the
"On-Stand-by" button again.

Adjusting the temperature: To change the temperature
inside the refrigerator or freezer compartment, press the
Freezer or Fridge button.

Displaying the refrigerator and freezer
compartment temperatures.

The temperature inside the refrigerator compartment can
be adjusted between +2°C and + 8°C. In the same way,
the freezer compartment temperature can be adjusted
between -16°C and -24°C.

GUIDE TO SELECTING FUNCTIONS

Functions and settings for the refrigerator
compartment.

Fridge

Refrigerator compartment temperature setting.

Vacation

This function turns the refrigerator compartment
to a warmer state if you are going away for some
time.
To select the function, press the "Options" button
several times, until the vacation symbol will
blink, then press "OK" to confirm.
To turn the refrigerator back to setting point
repeat this procedure. When the function is active
fridge temperature display shows " - " symbol.
Important: after activating this function, remove
all perishable foodstuffs from the refrigerator
compartment and leave the door closed, since the
refrigerator maintains a suitable temperature to
prevent the formation of unpleasant odours.
The freezer compartment will keep on working
as usual also during the Vacation mode.

On-Stand-by

This function turns off both the refrigerator and
freezer compartments.

To enable the stand-by function, press & hold the
"On-stand-by" button for 3 seconds, hyphens
appear on both display to indicate that the
appliance is in stand-by.
To switch the appliance on again, follow the same
procedure until the previously set temperature is
shown on the display.
When the appliance is in stand-by the light inside
the refrigerator compartment does not work.
Remember that this operation does not
disconnect the appliance from the power supply.

Fast Cooling
The use of this function is recommended
when placing a very high quantity of food in
the refrigerator compartment.

To select the function, press the "Options" button
several times, until the Fast Cooling symbol
will blink, then press "OK" to confirm. The
function is automatically disabled after 6 hours, or
can be manually disabled by repeating the same
procedure.

Functions and settings for the freezer compartment

Freezer

Freezer compartment temperature setting.

Extra Load

The use of this function is recommended when
placing a very high quantity of food to be frozen in
the freezer compartment.
Activate this function 24 hours before freezing
fresh food. To select the function, press the
"Options" button just once, the Extra Load symbol

will blink, then press "OK" to confirm.
After 24 hours place the food to be frozen in the
upper basket of freezer compartment.

The function is automatically disabled after
48 hours, or can be manually disabled by
repeating the same procedure.

Party Mode

To select the function, press the "Options" button
several times, until the Party Mode symbol
will blink, then press "OK" to confirm. Use this
function to chill drinks inside the freezer
compartment.
30 minutes after selection (the time required to
chill a 0.75 l bottle without the glass breaking),
the symbol flashes, an acoustic alarm sounds and
the display lights up: remove the bottle from the
freezer compartment and press the "Reset"
button to disable the function.
Important: do not leave the bottle inside the
freezer compartment longer than the time
necessary for chilling.

ROBGRUSHSKCZPLFINDKNSGRIPENLFGBD

PRODUCT SHEET

GB

Downloaded from Fridge-Manual.com Manuals