Whirlpool WRT318FZDW05, WRT318FZDM05, WRT318FZDB05 Owner’s Manual

REFRIGERATOR

USER INSTRUCTIONS

THANK YOU for purchasing this high-quality product. Register your new refrigerator at www.whirlpool.com. In Canada, register your refrigerator at www.whirlpool.ca.

For future reference, please make a note of your product model and serial numbers. These can be located on the inside wall of the refrigerator compartment.

Model Number ___________________________________________ Serial Number____________________________________________

Para obtener acceso a “Instrucciones para el usuario del refrigerador” en español, o para obtener información adicional acerca de su producto, visite: www.whirlpool.com.

Necesitará su número de modelo y de serie, ubicado en el interior del compartimiento del refrigerador.

Table of Contents / Table des matières

REFRIGERATOR SAFETY.....................................................................2

Proper Disposal of Your Old Refrigerator...........................................3

INSTALLATION INSTRUCTIONS .........................................................3

Unpack the Refrigerator......................................................................3

Location Requirements.......................................................................4

Electrical Requirements........

Water Supply Requirements...............................................................4

Connect the Water Supply..................................................................5

Refrigerator Doors...............................................................................6

Reversibility Kit Instructions..............................................................11

Adjust the Doors .................................

REFRIGERATOR USE .........................................................................12

Using the Controls ............................................................................12

REFRIGERATOR FEATURES .............................................................13

Refrigerator Shelves..........................................................................13

Deli Drawer........................................................

Crisper...............................................................................................13

FREEZER FEATURES .........................................................................14

Freezer Shelf .....................................................................................14

DOOR FEATURES ...............................................................................14

Door Rails..............................

Door Bins...........................................................................................14

Utility Compartment..........................................................................15

Ice Maker..................................

REFRIGERATOR CARE.......................................................................15

Cleaning .........................

Changing the Light Bulb...................................................................16

Vacation and Moving Care ...............................................................16

TROUBLESHOOTING..........................................................................17

Refrigerator Operation ......................................................................17

Temperature and Moist

Ice and Water.................

ACCESSORIES ....................................................................................18

WARRANTY..........................................................................................19

BRAND BADGE PLACEMENT TEMPLATE...................BACK COVER

..............................................................4

..............................................11

...............................

............................................................14

.........................................................15

...................................................................15

ure ...............................................................18

...................................................................18

.13

SÉCURITÉ DU RÉFRIGÉRATEUR ..................................................... 20

Mis

e au rebut appropriée de votre vieux réfrigérateur.....................21

INSTRUCTIONS D’INSTALLATION ................................................... 21

Déballage du réfrigérateur ................................................................21

Exigences d‘emplacement ..............................................................

Spécifications électriques.................................................................22

Spécifications

Raccordement de la canalisation d'eau........................................... 23

Portes du réfrigérateur...................................................................... 24

Instructions pour l’ensemble d’inversion du sens d’ouverture........ 30

Ajustement des portes......................................................................30

UTILISATION DU RÉFRIGÉRATEUR.................................................31

Utili

sation des commandes..............................................................31

CARACTÉRISTIQUES DU RÉFRIGÉRATEUR .................................. 32

Tablettes du réfrigérateur ....................

Tiroir pour spécialités alimentaires................................................... 32

Bac à légumes..................................................................................33

CARACTÉR

Tablette du congélateur....................................................................33

CARACTÉRISTIQUES DE LA PORTE................................................34

Tringles de porte............................................................................... 34

Balconnets de porte .........................................................................34

Compa

Machine à glaçons....................

ENTRETIEN DU RÉFRIGÉRATEUR...................................................35

Nettoyage..........................................................................................35

Remplacement des ampoules d’éclairage.......................................35

Entretien

DÉPANNAGE........................................................................................ 37

Fonctionnement du réfrigérateur......................................................37

Température et humidité ..................................................................38

Glaçons et eau......................................................

ACCESSO

GARANTIE............................................................................................40

GABARIT DE POSITIONNEMENT

DE L’INSIGNE DE LA MARQUE..................COUVERTURE ARRIÈRE

de l’alimentation en eau............................................23

.............................................32

ISTIQUES DU CONGÉLATEUR......................................33

rtiment utilitaire ..................................................................... 34

........................................................34

avant les vacances ou lors d’un déménagement............. 36

............................38

IRES ....................................................................................39

. 22

W11208457 A

REFRIGERATOR SAFETY

Your safety and the safety of others are very important.

We have provided many important safety messages in this manual and on your appliance. Always read and obey all safety messages.

This is the safety alert symbol. This symbol alerts you to potential hazards that can kill or hurt you and others. All safety messages will follow the safety alert symbol and either the word “DANGER” or “WARNING.”

These words mean:

You can be killed or seriously injured if you don't immediately

DANGER

WARNING

All safety messages will tell you what the potential hazard is, tell you how to reduce the chance of injury, and tell you what can happen if the instructions are not followed.

IMPORTANT SAFETY INSTRUCTIONS

WARNING:

■ Plug into a grounded 3 prong outlet.

■ Do not remove ground prong.

■ Do not use an adapter.

■ Do not use an extension cord.

■ Disconnect power before servicing.

■ Replace all parts and panels before operating.

■ Remove doors from your old refrigerator.

■ Connect to a potable water supply only.

■ Use nonflammable cleaner.

■ Keep flammable materials and vapors, such as gasoline,

away from refrigerator.

■ Use two or more people to move and install refrigerator.

To reduce the risk of fire, electric shock, or injury when using your refrigerator, follow these basic precautions:

follow instructions.

You

can be killed or seriously injured if you don't

instructions.

■ Disconnect power before installing ice maker (on ice maker

kit ready models only).

■ Use a sturdy glass when dispensing ice (on some models).

■ Do not hit the refrigerator glass doors (on some models).

■ This appliance is not intended for use by persons (including

children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.

■ Children should be supervised to ensure that they do not

play with the appliance.

SAVE THESE INSTRUCTIONS

State of California Proposition 65 Warnings: WARNING: This product contains one or more chemicals known to the State of California to cause cancer. WARNING: This product contains one or more chemicals known to the State of California to cause birth defects or other

reproductive harm.

Proper Disposal of

Your Old Refrigerator

WARNING

Suffocation Hazard Remove doors from your old refrigerator. Failure to do so can result in death or brain damage.

IMPORTANT: Child entrapment and suffocation are not problems of the past. Junked or abandoned refrigerators are still dangerous – even if they will sit for “just a few days.” If you are getting rid of your old refrigerator, please follow these instructions to help prevent accidents.

Before You Throw Away Your Old Refrigerator or Freezer:

Take off the doors. Leave the shelves in place so that children may not easily

climb inside.

INSTALLATION INSTRUCTIONS

Important information to know about disposal of refrigerants:

Dispose of refrigerator in accordance with Federal and Local regulations. Refrigerants must be evacuated by a licensed, EPA certified refrigerant technician in accordance with established procedures.

Unpack the Refrigerator

WARNING

Excessive Weight Hazard

Use two or more people to move and install refrigerator.

Failure to do so can result in back or other injury.

Remove the Packaging

IMPORTANT: Do not remove the white foam air return insert from

behind the control panel on the ceiling of the refrigerator. If the insert is removed, ice may migrate down from the freezer and cause icicles to form.

Remove tape and glue residue from surfaces before turning on the refrigerator. Rub a small amount of liquid dish soap over the adhesive with your fingers. Rinse with warm water and dry with a soft cloth.

Do not use sharp instruments, rubbing alcohol, flammable fluids, or abrasive cleaners to remove tape or glue. These products can damage the surface of your refrigerator. For more information see “Refrigerator Safety.”

When Moving Your Refrigerator:

Your refrigerator is heavy. When moving the refrigerator for cleaning or service, be sure to cover the floor with cardboard or hardboard to avoid floor damage. Always pull the refrigerator straight out when moving it. Do not wiggle or “walk” the refrigerator when trying to move it, as floor damage could occur.

Clean Before Using

After you remove all of the package materials, clean the inside of your refrigerator before using it. See the cleaning instructions in “Refrigerator Care.”

Important information to know about glass shelves and covers:

Do not clean glass shelves or covers with warm water when they are cold. Shelves and covers may break if exposed to sudden temperature changes or impact, such as bumping. Tempered glass is designed to shatter into many small, pebble-size pieces. This is normal. Glass shelves and covers are heavy. Use both hands when removing them to avoid dropping.

Location Requirements

Electrical Requirements

WARNING

Explosion Hazard

Keep flammable materials and vapors, such as gasoline, away from refrigerator.

Failure to do so can result in death, explosion, or fire.

IMPORTANT: This refrigerator is designed for indoor household use only.

To ensure proper ventilation for your refrigerator, allow for ½" (1.25 cm) of space on each side and at the top. Allow for 1" (2.54 cm) of space behind the refrigerator. If your refrigerator has an ice maker, allow extra space at the back for the water line connections. When installing your refrigerator next to a fixed wall, leave a 2" (5.08 cm) minimum space on the hinge side (some models require more) to allow the door to swing open.

NOTE: This refrigerator is intended for use in a location where the temperature ranges from a minimum of 55°F (13°C) to a maximum of 110°F (43°C). The preferred room optimum performance, which reduces electricity usage and provides superior cooling, is between 60°F (15°C) and 90°F (32°C). It is recommended that you do not install the refrigerator near a heat source, such as an oven or radiator.

temperature range

for

WARNING

Electrical Shock Hazard Plug into a grounded 3 prong outlet. Do not remove ground prong. Do not use an adapter. Do not use an extension cord. Failure to follow these instructions can result in death,

fire, or electrical shock.

Before you move your refrigerator into its final location, it is important to make sure you have the proper electrical connection.

Recommended Grounding Method

A 115-volt, 60 Hz, AC-only, 15- or 20-amp fused, grounded electrical supply is required. It is recommended that a separate circuit serving only your refrigerator be provided. Use an outlet that cannot be turned off by a switch. Do not use an extension cord.

NOTE: Before performing any type of installation or cleaning, or removing a light bulb, turn cooling off or turn the control (Thermostat, Refrigerator, or Freezer control depending on the model) to OFF, and then disconne electrical source. When you are finished, reconnect the refrigerator to the electrical source and turn cooling on or reset the control (Thermostat, Refrigerator, or Freezer control, depending on the model) to the desired setting. See “Using the Controls” in the User Instructions, User Guide, or Use & Care Guide.

ct the refriger

ator from the

2" (1.25 cm)

2" (5.08 cm)

Water Supply Requirements

Gather the required tools and parts before starting installation. Read and follow the instructions provided with any tools listed here.

TOOLS NEEDED:

Flat-blade screwdriver ⁷⁄₁₆" and ¹⁄₂" open-end or two

adjustable wrenches

NOTE: Your refrigerator dealer has a kit available with a ¹⁄₄" (6.35 mm) saddle-type shut-off valve, a union, and copper tubing. Before purchasing, make sure a saddle-type valve complies with your local plumbing codes. Do not use a piercing-type or ³⁄₁₆" (4.76 mm) saddle valve which reduces water flow and clogs more easily.

IMPORTANT:

All installations must meet local plumbing code requirements. Use copper tubing and check for leaks. Install copper tubing

only in areas where the household temperatures will remain above freezing.

¹⁄₄" nut driver ¹⁄₄" drill bit

Cordless drill

Water Pressure

A B

DEF

D E

A cold water supply with water pressure of between 30 and 120 psi (207 and 827 kPa) is required to operate the water dispenser and ice maker. If you have questions about your water pressure, call a licensed, qualified plumber.

Reverse Osmosis Water Supply

IMPORTANT: The pressure of the water supply coming out of a

reverse osmosis system going to the water inlet valve of the refrigerator needs to be between 30 and 120 psi (207 and 827 kPa).

If a reverse osmosis water filtration system is connected to your cold water supply, the water pressure to the reverse osmosis system needs to be a minimum of 40 to 60 psi (276 to 414 kPa).

If the water pressure to the reverse osmosis system is less than 40 to 60 psi (276

Check to see whether the sediment filter in the reverse osmosis system is blocked. Replace the filter if necessary.

Allow the storage tank on the reverse osmosis system to refill after heavy usage.

If you have questions about your water pressure, call a licensed, qualified plumber.

to 414 kPa):

Connect the Water Supply

Read all directions before you begin. IMPORTANT: If you turn the refrigerator on before the water line is

connected, turn the ice maker off.

7. Slip the compression sleeve and compression nut on the copper tubing as shown. Insert the end of the tubing into the outlet end squarely as far as it will go. Screw compression nut onto outlet end with adjustable wrench. Do not overtighten.

8. Place the free end of the tubing in a container or sink, and turn on the main water supply. Flush the tubing until water is clear. Turn off the shut-off valve on the water pipe. Coil the copper tubing.

Connect to Refrigerator

1. Unplug refrigerator or disconnect power.

2. Attach the copper tubing to the valve inlet using a

compression nut and sleeve as shown. Tighten the compression nut. Do not overtighten.

3. Use the tube clamp on the back of the refrigerator to secure the tubing to the refrigerator as shown. This will help avoid damage to the tubing when the refrigerator is pushed back against the wall.

4. Turn shut-off valve ON.

5. Check for leaks. Tighten any connections (including

connections at the valve) or nuts that leak.

Connect to Water Line

1. Unplug refrigerator or disconnect power.

2. Turn off main water supply. Turn on nearest faucet long

enough to clear line of water.

3. Locate a ½" to 1¹⁄₄" (1.25 cm to 3.18 cm) vertical cold water pipe near the refrigerator.

IMPORTANT:

Make sure it is a cold water pipe. Horizontal pipe will work, but drill on the top side of the

pipe, not the bottom. This will help keep water away from the drill and normal sediment from collecting in the valve.

4. Determine the length of copper tubing you need. Measure from the connection on the lower left rear of refrigerator to the water pipe. Add 7 ft (2.1 m) to allow for cleaning. Use ¹⁄₄" (6.35 mm) O.D. (outside diameter) copper tubing. Be sure both ends of copper tubing are cut square.

5. Using a cordless drill, drill a ¹⁄₄" hole in the cold water pipe you have selected.

A. Cold water pipe

B. Pipe clamp C. Copper tubing D. Compression nut

6. Fasten

the shut-off valve to the cold water pipe with the pipe clamp. Be sure the outlet end is solidly in the ¹⁄₄" drilled hole in the water pipe and that the washer is under the pipe clamp. Tighten the pack and evenly so washer makes a watertight seal. Do not overtighten or you may crush the copper tubing.

ing nut. Tighten the pipe clamp screws slowly

E. Compression sleeve F. Shut-off valve

G. Packing nut

6. The ice maker is equipped with a built-in water strainer. If your water conditions require a second water strainer, install it in the ¹⁄₄" a water strainer from your nearest appliance dealer.

Complete the Installation

Plug into a grounded 3 prong outlet. Do not remove ground prong. Do not use an adapter. Do not use an extension cord. Failure to follow these instructions can result in death,

fire, or electrical shock.

1. Plug into a grounded 3 prong outlet.

NOTE: Allow 24 hours to produce the first batch of ice. Discard

the first three batches of ice produced. Allow 3 days to completely fill ice container.

A. Tube clamp B. Tube clamp screw C. Copper tubing

5 mm) water line at either tube connection. Obtain

(6.3

WARNING

Electrical Shock Hazard

D. Compression nut

E. Valve inlet

Refrigerator Doors

Door Hinge

Hole Plug

Cabinet Hinge

Hole Plug

Dome Cap

Washer

Setscrew

Shoulder

Screw

Shoulder

Screw Washer

Door Stop

Screw

Flat-Head

Handle

Screw

Door Handle

Hole Cap

Depending on the width of your doorway, you may need to remove the doors to move the refrigerator into your home. Also, the door hinges are factory installed on the right-hand side. If you want the door to open from the other direction, you must reverse the door swing.

IMPORTANT:

Before you begin, turn the refrigerator control off, unplug refrigerator or disconnect power. Remove food and any adjustable door or utility bins from doors.

Depending on your model, your refrigerator has either Style 1 – Contour Doors or Style 2 - Standard Doors. Reference the graphic specific to your model later in this section following “Final Steps.”

NOTE: A Reversibility Kit, which includes a new Brand Badge and hole covers, is available.

Tools Needed: ⁵⁄₁₆" hex-head socket wrench, #2 Phillips screwdriver, flat-b lade screwdriver, ⁵⁄₁₆" open-end wrench, flat 2" putty knife

6. Remove the washer from the bottom of the Cent

er Hinge

pin.

7. Lift the refrigerator door from the Bottom Hinge and set aside.

8. Using a hex-head socket wrench, remove the four ⁵⁄₁₆"

hex-head hinge screws from the Bottom Hinge and pull the hinge from the bottom of the refrigerator door.

Remove Doors and Hinges

⁵⁄₁₆

" Hex-Head Hinge Screw

1. Unplug refrigerator or disconnect power.

2. Using a hex-head socket wrench, remove the three ⁵⁄₁₆"

hex-head hinge screws from the Top Hinge and lift up to remove the hinge. See Top Hinge graphic.

NOTE: Provide additional support for the doors while the hinges are being moved. Do not depend on the door magnets to hold the doors in place while you are working.

3. Lift the freezer door off of the center hinge and set it aside.

4. Remove the washer from the top of the Center Hinge pin.

Reverse Doors and Hinges (optional)

IMPORTANT: If you want to reverse your doors so that they open

in the opposite direction, follow these steps. If you are not reversing the doors, see “Replace Doors and Hinges.”

See complete graphics later in these instructions.

Reverse Center Hinge

1. Remove the three dome caps and screws from the handle

side and use them to fill the holes created when the hinge screws were removed.

A. Washer

5. Using a hex-head socket wrench and an open-end wrench, remove the three screws from the Center Hinge and remove the hinge. Set aside.

A. Center hinge B.

⁵⁄₁₆

" hex-head hinge screws

A. Dome cap washers B. Hex-head hinge screws

C. Dome caps

2. Using the three ⁵⁄₁₆" hex-head hinge screws, removed in Step 1, insert two screws halfway into the holes, leaving space to insert the Center Hinge.

3. Once the refrigerator door is in place, slide the center hinge

A B

from the right onto the screws, insert the third screw, and then tighten all screws completely.

NOTE: Make sure the washers are in place on both the top and bottom pins of the center hinge.

⁵⁄₁₆

" hex-head hinge screws

B. Washers

Reverse Freezer Door

1. Remove the three cabinet hole plugs from the top of the

cabinet and place them in the hinge holes on the opposite side.

6. Move the door stop to the opposite side making sure that the hole in the door stop plate is aligned perfectly with the hole for the center hinge pin.

7. Using the screw removed earlier, fasten the door stop to the bottom of the freezer door.

A. Door stop screw

8. Depending on your model, place the handle on the shoulder

ew and

scr

push the handle toward the door until the mounting

base is flush against the door.

A. Cabinet hole plugs

2. Remove the door handles. See the model specific graphics later in these instructions.

Door Handles installed with flat-head screws and setscrews:

Remove the two flat-head handle screws from the bottom of the freezer door handle.

Using the ¹⁄₈" hex key, loosen the setscrew attaching the top of the handle.

Pull the handle away from the door to release it from the shoulder screw. Keep all parts together.

Door handles installed with flat-head screws only:

Remove the screw cover and the three flat-head handle screws. Keep all parts together.

3. Using the plastic tool (provided), remove the brand badge from the freezer door by prying up the right-hand side and slowly peeling the badge away from the door, revealing the

9. Fasten the bottom of the handle to the bottom of the freezer door.

10. Tighten all screws. Set aside the freezer door until the hinges and refrigerator door are in place.

Reverse Refrigerator Door

1. Remove the door stop from the bottom of the refrigerator

door.

A. Setscrew

hole to mount the door handle.

NOTES:

To avoid scratching the finish, do not use a sharp or metallic object to pry the brand badge from the door.

Rub a small amount of liquid dish soap over any adhesive residue with your fingers. Rinse the door with warm water and dry with a soft cloth.

4. Depending on your model, remove the shoulder screw and its washer from the left-hand side of the door and fasten it into the hole that was behind the brand badge.

5. Remove the door stop from the bottom of the freezer door.

2. Replace the door stop on the opposite side of the refrigerator

door, making sure that the hole in the door stop plate is

A. Door stop screw B. Door stop

aligned perfectly with the hole for the Bottom Hinge pin.

door st

3. Fasten the

A. Door stop screw B. Door stop

4. Remove the door handles. See the model-specific graphics later in these instructions.

op to the door.

Door Handles installed with flat-head screws and

CCA

setscrews:

Remove the screws from the top of the refrigerator door handle.

Remove the setscrew from the lower part of the handle. Pull the handle away from the door to release it from the

shoulder screw. Keep all parts together.

Door handles installed with flat-head screws only:

Remove the screw cover and the three flat-head handle screws. Keep all parts together.

5. Remove the cap covering the hole on the opposite side of the door where the refrigerator door handle will be installed and discard the cap.

Reverse Top Hinge - Contour door models only

1. Remove the screw attaching the hinge pin to the hinge. Turn

the hinge over so that it is pointing in the opposite direction.

2. Place the plastic spacer beneath the hinge so that it will be between the hinge and the cabinet, making sure the holes are aligned.

A. Plastic spacer B. Hinge pin screw

C. Hinge pin

6. Depending on your model, remove the shoulder screw and its washer from the left-hand side of the door and fasten it into the hole that was behind the cap.

7. Depending on your model, place the handle on the shoulder screw and push the handle toward the door until the mounting base is flush against the door.

8. Fasten the top of the refrigerator handle to the top of the refrigerator door.

3. Fasten the Top Hinge to the opposite side of the cabinet, only

inserting the screws

halfway, so you will be able to

replace and align the freezer door later.

⁵⁄₁₆

" hex-head hinge screws

A. B. Top hinge pin

C. Plastic spacer

Replace Doors and Hinges

IMPORTANT: Provide additional support for the doors while the

hinges are being moved. Do not depend on the door magnets to hold the doors in place while you are working.

Install Refrigerator Door

1. Insert the hinge pin into the Bottom Hinge of the refrigerator

door and fasten the hinge to the cabinet. Do not tighten completely.

A. Flat-head handle screws

9. Cover the remaining hole with

the cap (provided).

A. Bottom hinge

2. Place the washer on top of the Bottom Hinge pin.

3. Place the refrigerator door onto the Bottom Hinge pin.

4. Measure the distance from the bottom of the refrigerator door

to the floor. The distance should be approximately 1⁴⁄₅" (4.6 cm).

NOTE: If necessary, loosen the Bottom Hinge, without removing the screws, adjust the door to the correct height and fully tighten the screws.

10. Remove door hinge hole plug from the refrigerator door. Move to opposite side.

11. Tighten all screws. Set aside refrigerator door until bottom hinge is installed on the opposite side of the refrigerator.

Install Freezer Door

A. Door Hinge Hole Plug

A. Door Stop B. Door Stop Screw

A. Cabinet Hinge Hole Plugs

A. Door Stop B. Door Stop Screw

A. Shoulder Screw B. Setscrew

C. Flat-Head Handle Screw

/16" Hex-Head Hinge

Screws,

Dome Caps and Dome Cap Washers

B.5/16" Hex-Head Hinge Screws

A. Center Hinge

A. Flat-Head Handle Screw

B. Top Hinge

C. Hinge Pin

B C

A. Door Handle

Hole Cap

A. Bottom Hinge B. Washer

C.5/16" Hex-Head Hinge Screws

1. Place washer on the upper hinge pin of the Center Hinge.

2. Place the freezer door on the upper hinge pin of the Center

Hinge.

3. Insert the Top Hinge pin into the drilled hole in the top of the freezer door. Do not tighten the screws completely

4. Align the doors so that the bottom of the freezer door aligns evenly with the top of the refrigerator door. Tighten all screws.

NOTE: The distance between the doors should be approximately ³⁄₄" (19 mm).

Style 1 – Contour Door

Final Steps

1. Plug in the refrigerator or reconnect the power.

2. Reset the controls. See “Using the Controls.”

3. Return all removable door parts to doors and food to

refrigerator.

Door Removal &

Replacement

Top Hinge

Center Hinge

Bottom Hinge

Door Swing Reversal (optional)

1-1

1-2

Reinstallation of Door Stops

Removal of Door Stops

Style 2 – Standard Doors

A. Door Hinge Hole Plug

A. Door Handle Sealing Screws

A. Cabinet Hinge Hole Plugs

B.5/16" Hex-Head Hinge Screws C. Top Hinge

A. Top Hinge Cover

A. Door Handle

Hole Cap

/16" Hex-Head Hinge

Screws,

Dome Caps and Dome Cap Washers

B.5/16" Hex-Head Hinge Screws

A. Center Hinge

A. Bottom Hinge B. Washer

C.5/16" Hex-Head Hinge Screws

A. Door Stop Screw B. Door Stop

Side View

Front View

A. Shoulder Screw B. Setscrew

C. Flat-Head Handle Screw

A. Flat-Head Handle Screw

B. Screw Cover

D. Screw Cover

Door Removal &

Replacement

Door Swing Reversal (optional)

1-2

1-1

Top Hinge

Center Hinge

Bottom Hinge

Reversibility Kit Instructions

If your model came with a Reversibility kit, please use the Brand Badge Placement template and the following instructions to install the Brand Badge on the opposite side of the freezer door.

Parts Included:

Brand badge removal tool Brand badge template (on last page of User Instructions) Door handle hole cap

Tools Needed:

Scissors Masking tape

Freezer Door

1. Using the removal tool (provided), remove the brand badge

from the freezer door by lifting up the right-hand side and peeling the badge away from the door from right to left.

NOTE: To avoid scratching the do metallic object to pry the brand badge from the door.

2. Rub a small amount of liquid dish soap over any adhesive residue with your fingers. Rinse the door with warm water and dry with a soft cloth.

3. Cut the template along the dotted lines that match the shape of the brand badge.

4. Align the edges of the template with the side and top of the freezer door and tape the template to the door.

NOTE: When the template is correctly aligned, the hole in the door, where the handle was, will be within the cutout of the template, as shown.

or, do not use a sharp or

Adjust the Doors

IMPORTANT: Your refrigerator complies with American

Disabilities Act (ADA) guidelines.

Door Closing

Your refrigerator has two front adjustable levelers - one on the right and one on the left. If your refrigerator seems unsteady or you want the doors to close easier, adjust the refrigerator's tilt using the following instructions:

1. Turn the leveler to lower or raise that side of the refrigerator. It may take several turns to adjust the tilt of the refrigerator.

To raise, turn the leveler to the right. To lower, turn the leveler to the left.

NOTE: Having someone push against the top of the refrigerator takes some weight off the levelers and rollers which makes it easier to adjust.

5. Using the cutout as a guide, press the brand badge onto the freezer door making sure that the hole is completely covered.

6. Slowly remove the template.

2. Open both doors again to make sure they close as easily as

you like. If not, tilt the refrigerator slightly more to the rear by turning both leveling legs to the left; it may take several more turns.

NOTE: To keep the refrigerator level, you should turn both leveling legs the same amount.

3. Using a level, be sure that the refrigerator is still level side to side. Readjust if necessary.

Door Aligning

If the space between your doors looks uneven, you can adjust it using the following instructions:

1. Depending on your model, remove the Top Hinge cover.

2. Loosen the top hinge screws using a ⁵⁄₁₆" socket or wrench.

3. Have someone hold the door in place or put a spacer between

the doors while you tighten the top hinge screws.

4. Replace the Top Hinge cover, if removed in Step 1.

REFRIGERATOR USE

Using the Controls

Your refrigerator has two controls that affect the temperature. T h e Temperature control located at the top front of the refrigerator compartment and the Airflow control located on the back wall of the freezer compartment.

IMPORTANT:

The recommended setting should be correct for normal household refrigerator use. The controls are set correctly when milk or juice is as cold as you like and when ice cream is firm.

Wait 24 hours for your refrigerator to cool completely before adding food. If you add food before the refrigerator has cooled completely, your food may spoil.

NOTE: Adjusting the refrigerator and freezer temperature controls to a colder than recommended setting will not cool the compartments any faster.

If the temperature is too warm or too cold in the refrigerator or freezer, first check the air vents to be sure they are not blocked before adjusting the controls.

Adjusting the Temperature Control

If you need to adjust the temperature in either the refrigerator or freezer compartment, use the settings listed in the chart below as a guide.

NOTE: Except when starting the refrigerator, do not adjust the control more than one setting at a time. Wait 24 hours between adjustments for the temperature to stabilize.

Press the SETTING button to toggle among the 4 LED lights which indicate the temperature setting. Reading from left to right, the LED in the first position is the least cold. The LEDs indicate increasingly colder settings as you continue to the right until all 4 LEDs are illuminated.

CONDITION/REASON: ADJUSTMENT:

REFRIGERATOR too warm TEMPERATURE control one

FREEZER too warm/Too little ice

setting higher AIRFLOW or TEMPERATURE

control one setting higher

Temperature Control

For your convenience, the Temperature control is preset at the factory. When you first install your refrigerator, make sure the control is still preset as shown.

Recommended Setting

Cooling Off/On

To turn cooling off, press and hold the Setting button for 4 seconds until all lights are illuminated for 1 second. To turn cooling back on, press and hold the Setting button again for 4 seconds.

NOTE: Neither compartment will cool when the control is set to OFF.

REFRIGERATOR too cold TEMPERATURE co ntrol one

setting lower

FREEZER too cold AIRFLOW or TEMPERATURE

control one setting lower

Airflow Control

The Airflow control regulates the amount of air flowing between the freezer and the refrigerator compartments.

When you plug in the refrigerator for the first time, turn the Airflow control to the Recommended setting.

Adjusting the Airflow Control

If you want to temporarily increase the cold airflow to a specific compartment, adjust the control.

Max - Increase airflow to the freezer. Min - Increase airflow to the refrigerator.

IMPORTANT: Once the performance is achieved, return the Airflow control to the Recommended setting to keep the refrigerator operating at optimum efficiency.

CONDITION/REASON: ADJUSTMENT:

Heavy ice use Max Hot room temperature Max - to maintain ice making

Large quantity of groceries Min - to

production rate

quickly chill food and

beverages

REFRIGERATOR FEATURES

Your model may have some or all of these features.

Important information to know about glass shelves and covers:

Refrigerator Shelves

The shelves in your refrigerator are adjustable to match your individual storage needs.

Storing similar food items together in your refrigerator and adjusting the shelves to fit different heights of items will make finding the exact item you want easier. It will also reduce the amount of time the refrigerator door is open, and save energy.

To remove and replace a shelf:

1. Remove items from the shelf.

2. Slide the shelf straight out to the stop.

3. Depending on your model, lift back or front of the shelf past

the stop. Slide shelf out the rest of the way.

4. Replace the shelf by sliding the back of the shelf into the in the wal

5. Guide the front of the shelf into the shelf track. Be sure to slide the shelf in all the way.

l of the cabinet.

track

Deli Drawer Cover

To remove and replace the deli drawer cover: Style 1 - Wire Shelves

1. Remove the deli drawer.

2. Push the cover back to release the rear clips from the shelf.

Tilt the cover up at the front, and then pull it forward.

3. Replace the deli drawer cover by fitting the notches and clips on the cover over the rear and center crossbars on the shelf.

4. Replace the deli drawer.

Style 2 - Glass Shelves

1. Remove the deli drawer.

2. Remove items from the shelf.

3. Slide the shelf straight out to the stop.

4. Slide the deli cover to one side until free.

5. Insert the cover into the shelf tracks.

6. Slide the shelf back into the refrigerator, and then replace the

deli drawer.

on the

NOTE: The deli drawer slides sideways flexible positioning.

Meat Storage Guide

shelf to allow for

Deli Drawer

The deli drawer design allows flexible positioning.

Deli Drawer

To reposition the deli drawer:

1. Remove deli drawer.

2. Release cover and place it between the desired crossbars.

3. Secure the rear clips onto the shelf.

4. Replace the deli drawer. To remove and replace the deli drawer:

1. Slide deli drawer out to the stop.

2. Lift front of deli drawer with one hand while supporting bottom

of drawer with other hand. Slide drawer out the rest of the way.

3. Replace the drawer by sliding it back in fully past the drawer stop.

Store most meat in original wrapping as long as it is airtight and moisture-proof. Rewrap if necessary. See the following chart for storage times. When storing meat longer than the times given, freeze the meat.

Fresh fish or shellfish.........................Use same day as purchased.

Chicken, ground beef, variety meats (liver)......................1-2 days

Cold cuts, steaks/roasts ..................................................3-5 days

Cured meats...................................................................7-10 days

ith pl

Leftovers - Cover leftovers w plastic containers with tight lids.

astic wrap, aluminum foil, or

Crisper

Crisper Drawers

To remove and replace the crisper drawer:

1. Slide the crisper drawer straight out to the stop. Lift the front

and slide the drawer out the rest of the way.

2. Replace the drawer by sliding the drawer in fully past the stop.

Crisper Cover

To remove and replace the crisper cover:

1. Remove the crisper(s).

2. Pull the glass straight out.

3. Replace the glass by pushing it straight in.

Crisper Humidity Control

Frozen Food Storage Guide

Storage times will vary according to the quality and type of food, the type of packaging or wrap used (should be airtight and moisture-proof), and the storage temperature. Seal the package or container securely to avoid taste and odor transfer throughout the product. Ice crystals inside a sealed package are normal. This simply means that moisture in the food and air inside the package have condensed, creating ice crystals.

Put no more unfrozen food into the freezer than will freeze within 24 hours (no more than 2 to 3 lbs of food per cubic foot [907 to 1,350 g per L] of freezer space). Leave enough space in the freezer for air to cir close tightly.

NOTE: For more information on preparing food for freezing, check a freezer guide or reliable cookbook.

ate around packages. The freezer door must

cul

You can control the amount of humidity in the moisture-sealed crisper. Adjust the control to any setting between LOW and HIGH.

LOW (open) lets moist air out of the crisper for best storage of fruits and vegetables with skins.

Fruit: Wash, let dry, and store in refrigerator in plastic bag or crisper. Do not wash or hull berries until they are ready to use. Sort and keep berries in original container in crisper or store in a loosely closed paper bag on a refrigerator shelf.

Vegetables with skins: Place in plastic bag or plastic container and store in crisper.

HIGH (closed) keeps moist air in the crisper for best storage of fresh, leafy vegetables.

Leafy vegetables: Wash in cold water, drain, and trim or tear off bruised and discolored areas. Place in plastic bag or plastic container and store in crisper.

FREEZER FEATURES

Your model may have some or all of these features.

Important information to know about glass shelves and covers:

DOOR FEATURES

Your model may have some or all of these features.

Door Rails

The door rails may be removed for easier cleaning.

To remove and replace the rails:

1. Depending on your model, remove the rails by pushing in

slightly on the front of the bracket while pulling out on the inside tab. Repeat these steps for the other end.

2. Replace the rails by aligning the ends of the brackets with the buttons on the sides of the door liner. Firmly snap bracket and assembly onto the tabs above the shelf as shown.

Door Bins

To remove and replace the bins:

1. Remove the bin by lifting it and pulling it straight out.

2. Replace the bin by sliding it in above the desired support and

pushing it down until it stops.

Freezer Shelf

Depending on your model, the shelf may be wire or glass.

To remove and replace a shelf:

1. Remove items from the shelf.

2. Slide the shelf straight out to the stop.

3. Depending on your model, lift back or front of the shelf past

the stop. Slide shelf out the rest of the way.

4. Replace the shelf by sliding the back of the shelf into the track in the wall of the cabinet.

5. Guide the front of the shelf into the shelf track. Be sure to slide the shelf in all the way.

Utility Compartment

The utility compartment may be removed for easier cleaning.

To remove and replace the utility compartment:

1. Remove the utility compartment by squeezing against one

side while raising the utility compartment up and pulling it straight out.

2. Replace the utility compartment by positioning one side in the lock and sliding in the opposite side until it stops.

Ice Maker

IMPORTANT: For models with a water filter, after connecting the

refrigerator to a water source or replacing the water filter, fill and discard three full containers of ice to prepare the water filter for use.

Ice Production Rate

The ice maker should produce approximately 8 to 12 batches of ice in a 24-hour period. Allow 3 days to completely fill the ice container.

To increase ice production, lower the freezer and refrigerator temperatures. See “Using the Controls.” Wait 24 hours between adjustments.

Remember

The quality of your ice will be only as good as the quality of the water supplied to your ice maker. Avoid connecting the ice maker to a softened water supply. Water softener chemicals (such as salt) can damage parts of the ice maker and lead to poor quality ice. If a softened water supply cannot be avoided, make sure the water softener is operating properly and is well maintained.

Do not use anything sharp to break up the ice in the bin. This can cause damage to the ice storage bin and the dispenser mechanism.

Do not store anything on top of or in the ice maker or ice storage bin.

REFRIGERATOR CARE

Turning the Ice Maker On/Off

To turn the ice maker on, simp ly lower the wire shut-off arm. To manually turn the ice maker off, lift the wire shut-off arm to the

Off (arm up) position and listen for the click. NOTE: Your ice maker has an automatic shutoff. As ice is made,

the ice cubes will fill the ice storage bin and the ice cubes will raise the wire shut-off arm to the Off (arm up) position. Do not force the wire shut-off arm up or down.

Ice Storage Bin

1. Wash the ice storage bin with mild soap and warm water.

2. Slide the ice storage bin under the ice maker and push it

toward the back as far as it will go.

3. Lower the arm on the ice maker to the On position. NOTE: It usually takes approximately 24 hours for the ice

maker to begin producing ice. You may notice the ice has an “off-taste.” If so, discard the first three batches of ice produced. After that the “off-taste” should be gone.

Cleaning

WARNING

Explosion Hazard Use nonflammable cleaner. Failure to do so can result in death, explosion, or fire.

Both the refrigerator and freezer sections defrost automatically. However, clean both sections about once a month to avoid buildup of odors. Wipe up spills immediately.

IMPORTANT:

Because air circulates between both sections, any odors formed in one section will transfer to the other. You must thoroughly clean both sections to eliminate odors. To avoid odor transfer and drying out of food, wrap or cover foods tightly.

For stainless steel models, stainless steel is corrosionresistant and not corrosion-proof. To help avoid corrosion of your stainless steel, keep your surfaces clean by using the following cleaning instructions.

To Clean Your Refrigerator:

NOTE: Do not use abrasive or harsh cleaners such as window

sprays, scouring cleansers, flammable fluids, muriatic acid, cleaning waxes, concentrated detergents, bleaches or cleansers containing petroleum products on exterior surfaces (doors and cabinet), plastic parts, interior and door liners, or gaskets. Do not use paper towels, scouring pads, or other harsh cleaning tools.

1. Unplug refrigerator or disconnect power.

2. Hand wash, rinse, and dry removable parts and interior

surfaces thoroughly. Use a clean sponge or soft cloth and a mild detergent in

warm wate

3. Clean the exterior surfaces. Painted metal: Wash painted metal exteriors with a clean,

soft cloth or sponge and a mild detergent in warm water. Rinse surfaces with clean, warm water and dry immediately to avoid water spots.

Stainless steel: Wash stainless steel surfaces with a clean, soft cloth or sponge and a mild detergent in warm water. Rinse surfaces with clean, warm water and dry immediately to avoid water spots.

NOTE: When cleaning stai direction of the grain to avoid cross-grain scratching.

4. There is no need for routine condenser cleaning in normal home operating environments. If the environment is particularly greasy or dusty, or there is significant pet traffic in the home, the co 3 months to ensure maximum efficiency.

If you need to clean the condenser:

Remove the base grille. Use a vacuum cleaner with a soft brush to clean the grille,

the open areas behind the grille, and the front surface area of the condenser.

Replace the base grille when finished.

5. Plug in refrigerator or reconnect power.

ndenser should be cleaned every 2 to

nless steel, always wipe in the

Changing the Light Bulb

NOTE: Applies to some models. IMPORTANT: The light bulbs in both the refrigerator and freezer

compartments of your new refrigerator use LED technology. If the lights do not illuminate when the refrigerator and/or freezer door is opened, call for assistance or service.

Refrigerator Compartment Light

The refrigerator light bulb is located behind the control.

1. Unplug refrigerator or disconnect power.

2. Remove the light bulb and replace it with an appliance bulb of

the same size and shape.

To replace the LED bulb with an LED bulb, order part number W10565137 (3.6 watts).

NOTE: Some LED replacement bulbs are not recommended for wet/damp environments. The refrigerator and freezer compartments are considered to be wet/damp environments. If using a brand of LED bulb other than the recommended LED bulb, before installation, read and follow all instructions on the LED packaging.

To replace an LED bulb with an incandescent bulb, use only incandescent bulbs for household appliances with a maximum of 60 watts.

3. Plug in refrig

erator or reconnect power.

Vacation and Moving Care

Vacations

If You Choose to Leave the Refrigerator On While You’re Away:

1. Use up any perishables and freeze other items.

2. If your refrigerator has an automatic ice maker and is

connected to the household water supply, turn off the water supply to the refrigerator. Property damage can occur if the water supply is not turned off.

3. If you have an automatic ice maker, turn off the ice maker. NOTE: Raise the wire shut-off arm to OFF (up) po

4. Empty the ice bin.

If You Choose to Turn Off the Refrigerator Before You Leave:

1. Remove all food from the refrigerator.

2. If your refrigerator has an automatic ice maker:

Turn off the water supply to the ice maker at least one day ahead of time.

When the last load of ice drops, raise the wire shut-off arm to the Off (up) position.

3. Turn off the Temperature controls. See “Using the Controls.”

4. Clean refrigerator, wipe it, and dry well.

5. Tape rubber or wood blocks to the tops of both doors to prop

them open far enough for air to get in. This stops odor and mold from building up.

Moving

When you are moving your refrigerator to a new home, follow these steps to prepare it for the move.

1. If your refrigerator has an automatic ice maker:

Turn off the water supply to the ice maker at least one day ahead of time.

Disconnect the water line from the back of the refrigerator. When the last load of ice drops, raise the wire shut-off arm

to the Off (up) position.

2. Remove all food from the refrigerator and pack all frozen food in dry ice.

3. Empty the ice bin.

4. Turn off the Temperature controls. See “Using the Controls.”

5. Unplug refrigerator.

6. Clean, wipe, and dry thoroughly.

7. Take out all removable parts, wrap them well, and tape them

together so they don’t shift and rattle during the move.

8. Depending on the model, raise the front of the refr rolls more easily OR raise the leveling screws so they don't scrape the floor. See “Adjust the Door(s)” or “Door Closing and Door Alignment.”

9. Tape the doors closed and tape the power cord to the back of the refrigerator.

When you get to your new home, put everything back and refer to the “Installation Instructions” section for preparation instructions. Also, if your refrigerator has an auto reconnect the water supply to the refrigerator.

matic ice maker, remember to

sition.

igerator so it

TROUBLESHOOTING

First try the solutions suggested here. If you need further assistance or more recommendations that may help you avoid a service call, refer to the warranty page in this manual and scan the code with your mobile device, or visit www.whirlpool.com/product_help. In Canada, visit www.whirlpool.ca.

Whirlpool Brand Home Appliances Customer eXperience Center 553 Benson Road Benton Harbor, MI 49022-2692

Please include a daytime phone number in your cor

Refrigerator Operation

respondence.

In Canada:

Whirlpool Brand Home Appliances Customer eXperience Centre 200 – 6750 Century Ave. Mississauga, Ontario L5N 0B7

The refrigerator will not operate

WARNING

Electrical Shock Hazard Plug into a grounded 3 prong outlet. Do not remove ground prong. Do not use an adapter. Do not use an extension cord. Failure to follow these instructions can result in death,

fire, or electrical shock.

Power cord unplugged? Plug into a grounded 3 prong outlet. Is outlet working? Plug in a lamp to see if the outlet is

working. Household fuse blown or circuit breaker tripped? Replace

the fuse or reset the circuit breaker. If the problem continues, call an electrician.

Controls on? Make sure the refrigerator control is ON. See “Using the Controls.”

New installation? Allow 24 hours following installation for the refrigerator to cool completely.

NOTE: Adjusting the temperature controls to coldest setting will not cool the refrigerator more quickly.

The lights do not work

Light bulb burned out? Replace light bulb. See “Changing the

Light Bulb.”

The motor seems to run too much

Your new refrigerator may run longer than your old one due to its high-efficiency compressor and fans. The unit may run even longer if the room is warm, a large food load is added, the door is opened often, or if the door has been left open.

The refrigerator seems noisy

Refrigerator noise has been reduced over the years. Due to this reduction, you may hear intermittent noises from your new refrigerator that you did not notice from your old model. Below are listed some normal sounds with explanations.

Buzzing - heard when the water valve opens to fill the ice maker

Pulsating - fans/compressor adjusting to optimize performance.

Hissing/Rattling - flow of refrigerant, movement of water lines, or from items placed on top of the refrigerator.

Sizzling/Gurgling - water dripping on the heater during Defrost cycle

Popping - contraction/expansion of inside walls, especially during initial cooldown

Water running/dripping - may be heard when ice melts during defrosting and water runs into the drain pan.

Creaking/Cracking - occurs as ice is being ejected from the ice maker mold

The doors will not close completely or they pop open

Door blocked open? Move food packages away from door. Bin or shelf in the way? Push bin or shelf back in the correct

position. Crisper cover in the way? Make sure the crisper cover is fully

pushed in so that the ba ck rests on the supports. Refrigerator not tilted toward the rear? So the doors will

close easier, raise the front of the refrigerator so that it tilts slightly downward toward the rear. See “Adjust the Doors.”

Door closed too quickly? Close the door slowly and firmly to keep the door from popping open.

The door is difficult to open

WARNING

Explosion Hazard Use nonflammable cleaner. Failure to do so can result in death, explosion, or fire.

Gaskets dirty or sticky? Clean gaskets and contact surfaces with mild soap and warm water. Rinse and dry with soft cloth.

Temperature and Moisture

Temperature is too warm

New installation? Allow 24 hours following installation for the

refrigerator to cool completely. Door opened often or left open? Allows warm air to enter

refrigerator. Minimize door openings and keep door fully closed.

Large load of food added? Allow several hours for refrigerator to return to normal temperature.

Controls set correctly for the surrounding conditions?

Adjust the controls a setting colder. Check temperature in 24 hours. See “Using the Controls.”

There is interior moisture buildup

Ice and Water

The ice maker is not producing ice or not enough ice

Refrigerator connected to a water supply and the supply shut-off valve turned on? Connect refrigerator to water

supply and turn water shut-off valve fully open. Kink in the water source line? A kink in the line can reduce

water flow. Straighten the water source line. Ice maker turned on? Make sure wire shut-off arm or switch

(depending on model) is in the On position. New installation? Wait 24 hours after ice maker installation

for ice production to begin. Allow 3 days to completely fill the ice container.

Large amount of ice recently removed? Allow 24 hours for ice maker to produce more ice.

Ice cube jammed in the ice maker ejector arm? Remove ice from the ejector arm with a plastic utensil.

Reverse osmosis water filtration system connected to your cold water supply? This can decrease water pressure.

See “Water Supply Requirements.”

The ice cubes are hollow or small

NOTE: This is an indication of low water pressure.

Water shut-off valve not fully open? Turn the water shut-off

valve fully open. Kink in the water source line? A kink in the line can reduce

water flow. Straighten the water source line.

Reverse osmosis water filtration system connected to your cold water supply? This can decrease water pressure.

See “Water Supply Requirements.” Questions remain regarding water pressure? Call a

licensed, qualified plumber.

NOTE: Some moisture buildup is normal.

Humid room? Contributes to moisture buildup. Door opened often or left open? Allows humid air to enter

refrigerator. Minimize door openings and keep door fully closed.

ACCESSORIES

The following accessories are available for your refrigerator. To order, contact us and ask for the part number.

In the U.S.A., visit our webpage www.whirlpool.com/ accessories or call 1-800-901-2042.

In Canada, visit our webpage www.whirlpoolparts.ca or call 1-800-807-6777.

affresh

In U.S.A., order Part #W10355016 In Canada, order Part #W10355016B

Stainless Steel Cleaner:

Off-taste, odor, or gray color in the ice

New plumbing connections? New plumbing connections can cause discolored or off-flavored ice.

Ice stored too long? Discard ice. Wash ice bin. Allow

24 hours for ice maker to make new ice. Odor transfer from food? Use airtight, moisture proof

packaging to store food. Are there minerals (such as sulfur) in the water? A water

filter may need to be installed to remove the minerals.

affresh

In U.S.A., order Part #W10355049 In Canada, order Part #W10355049B

affresh

In U.S.A., order Part #W10355010 In Canada, order Part #W10355010B

Reversibility Kit:

Order Part # W10395148

Stainless Steel Wipes:

Kitchen & Appliance Cleaner:

ATTACH YOUR RECEIPT HERE. PROOF OF PURCHASE IS REQUIRED

WHIRLPOOL®

MAJOR APPLIANCE

LIMITED WARRANTY

TO OBTAIN WARRANTY SERVICE. Please have the following information available when you call the

Customer eXperience Center:

Name, address and telephone number Model number and serial number A clear, detailed description of the problem Proof of purchase including dealer or retailer name and address

IF YOU NEED SERVICE:

1. Before contacting us to arrange service, please determine whether your product requires repair. Some

questions can be addressed without service. Please take a few minutes to review the Troubleshooting or Problem Solver section of the Use and Care Guide, scan the QR code on the right to access additional resources, or visit www.whirlpool.com/product_help.

2. All warranty service is provided exclusively by our authorized Whirlpool Service Providers

Canada, direct all requests for warranty service to:

Whirlpool Customer eXperience Center

In the U.S.A., call 1-800-253-1301. In Canada, call 1-800-807-6777.

If outside the 50 United States or Canada, contact your authorized Whirlpool dealer to determine whether another warranty applies.

ONE YEAR LIMITED WARRANTY

WHAT IS COVERED WHAT IS NOT COVERED

For one year from the date of purchase, when this major appliance is installed, operated and maintained according to instructions attached to or furnished with the product, Whirlpool Corporation or Whirlpool Canada LP (hereafter “Whirlpool”) will pay for Factory Specified Replacement Parts and repair labor to correct defects in materials or workmanship that existed when this major appliance was purchased, or at its sole discretion replace the product. In the event of product replacement, your appliance will be warranted for the remaining term of the original unit's warranty period.

YOUR SOLE AND EXCLUSIVE REMEDY UNDER THIS LIMITED WARRANTY SHALL BE PRODUCT REPA AS

PROVIDED HEREIN. Service must be provided by a Whirlpool designated service company. This limited warranty is valid only in the United States or Canada and applies only when the major appliance is used in the country in which it was purchased. This limited warranty is effective from the date of original consumer purchase. Proof of original purchase date is required to obtain service under this limited warranty.

1. Commercial, non-residential, multiple-family use, or use inconsistent with published user, operator or installation instructions.

2. In-home instruction on how to use your product.

rect

3. Service to cor accordance with electrical or plumbing codes or correction of household electrical or plumbing (i.e. house wiring, fuses or water inlet hoses).

4. Consumable parts (i.e. light bulbs, batteries, air or water filters, preservation solutions, etc.).

5. Defects or damage caused by the use of non-genuine Whirlpool parts or accessories.

6. Conversion of products from natural gas or L.P. gas.

7. Damage from accident, misuse, abuse, fire, floods, acts of God or use with products

not approved by Whirlpool.

8. Repairs to parts or systems to correct product damage or defects caused by unauthorized service, alteration or modification of the appliance.

9. Cosmetic damage including appliance finishes unless such damage results from defects in materials and workmanship and is reported to Whirlpool within 30 days.

10. Discoloration, rust or oxidation of surfaces resulting from caustic or corrosive environments including but not limited to high salt concentrations, high moisture or humidity or exposure to chemicals.

11. Food or medicine loss due to product failure.

12. Pick-up or delivery. This product is intended for in-home repair.

13. Travel or transportation expenses for service in remote locations where an authorized

Whirlpool servicer is not available.

14. Removal or r decorative panels, flooring, cabinetry, islands, countertops, drywall, etc.) that interfere with servicing, removal or replacement of the product.

15. Service or parts for appliances with original model/serial numbers removed, altered or not easily determined.

The cost of repair or replacement under these excluded circumstances shall be borne by the customer.

improper product maintenance or installation, installation not in

einstallation

. In the U.S. and

w.whirlpool.com/product_hel

ratches, dents, chips, and other damage to the

of inaccessible appliances or built-in fixtures (i.e. trim,

DISCLAIMER OF IMPLIED WARRANTIES

IMPLIED WARRANTIES, INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY OR IMPLIED WARRANTY OF FITNESS FOR A PARTICULAR PURPOSE, ARE LIMITED TO ONE YEAR OR THE SHORTEST PERIOD ALLOWED BY LAW. Some states and provinces do not allow limitations on the duration of implied warranties of merchantability or fitness, so this limitation may not apply to you. This warranty gives you specific legal rights, and you also may have other rights that vary from state to state or province to province.

DISCLAIMER OF REPRESENTATIONS OUTSIDE OF WARRANTY

Whirlpool makes no representations about the quality, durability, or need for service or repair of this major appliance other than the representations cont you should ask Whirlpool or your retailer about buying an extended warranty.

YOUR SOLE AND EXCLUSIVE REMEDY UNDER THIS LIMITED WARRANTY SHALL BE PRODUCT REPAIR AS PROVIDED HEREIN. WHIRLPOOL SHALL NOT BE LIABLE FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES. Some states and provinces do not allow the exclusion or limitation of incidental or consequential damages, so these limitations and exclusions may not apply to you. This warranty you also may have other rights that vary from state to state or province to province.

in this warranty. If you want a longer or more comprehensive warranty than the limited warranty that comes with this major appliance,

ained

LIMITATION OF REMEDIES; EXCLUSION OF INCIDENTAL AND CONSEQUENTIAL DAMAGES

gives

you specific legal rights, and

11/14

W11208457 A

04/16

Whirlpool WRT318FZDW05, WRT318FZDM05, WRT318FZDB05 Owner’s Manual

Specifications and Main Features

Frequently Asked Questions

User Manual