Whirlpool WMH53520CE, WMH53520CS, AWM 5050/1 INSTALLATION
3gb05410.fm5 Page 1 Friday, October 4, 2002 10:51 AM
GB
AWM 5050/1
A. “On/Off” Button
B. “On/Off” Indication
Programme
+
+
Cotton
with prewash
Cotton
Synthetics
Cotton
short
Synthetics
short
Delicates
Wool
Rinse +
long spin
Long spin
Rinse +
gentle spin
Gentle spin
Drain
Care
Labels
—
—
—
—
—
A
Type of wash/Notes
Heavily soiled, long wearing and temperature stable textiles in cotton and linen
(bed linen, table linen, underwear, shirts etc.).
The max load for heavily soiled laundry is 3.5 kg.
Slightly to normally soiled bed linen, table linen and underwear, towels, shirts etc.
made of cotton and linen.
The max load for heavily soiled laundry is 3.5 kg.
Slightly to normally soiled blouses, shirts, overalls etc. made of polyester (Diolen,
Trevira), polyamide (Perlon, Nylon) or blends with cotton.
Slightly soiled bed linen, table linen and underwear, towels, shirts etc. made of cotton
and linen.
Slightly soiled overalls and sports wear made of cotton, polyester, polyamide and
blends with cotton.
Curtains and delicate clothing, dresses skirts, shirts and blouses.
Only woollens with a felt-free finish, labelled with the woolmark and identified as
machine washable.
If you select “Rinse Hold” do not leave items to soak for too long.
With this programme you can add starch and/or fabric softener.
The programme ends with an intensive spin cycle.
In this programme spinning is intensive. Same as the spin cycle in the “Cotton” programme.
With this programme you can add starch and/or fabric softener.
The programme ends with an intensive spin cycle.
In this programme spinning is gentle. Same as the spin cycle in the “Wool” programme.
Drain only - no spinning. Alternative method of terminating programme the synthetic,
delicate and wool programme and for premature removal of the laundry.
B
: optional / Yes : dosing required
❉
Max
Load
Kg
Detergents and additives Special options
Bleach Softener Main
5.0 Yes
5.0 Yes
2.0 —
2.5 —
1.5 —
1.5 —
1.0 —
5.0 —
Pre-
Wash
❉
❉
❉
❉
❉
❉
❉
❉
Yes Yes
Yes —
Yes —
Yes —
Yes —
Yes — —
Yes — —
———
Half Load No Spin Rinse
wash
❉❉❉
❉❉❉
❉❉❉
❉❉❉
❉❉❉
Hold
❉❉
❉❉
❉❉
Temperature
Selector
°C
Max. 95°
Max. 95°
Max. 60°
Max. 40°
Max. 40°
Max. 40°
Max. 40°
—
5.0 — — — — — — — —
1.5 —
❉
———
❉❉
—
1.5 — — — — — — — —
—— — — — — — — —
Whirlpool is a registered trademark of Whirlpool USA.
5019 301 05410
Programme
Selector
1
2
3
4
5
6
7
A
B
C
D
E
Black Process Plate
3gb05410.fm5 Page 2 Friday, October 4, 2002 10:51 AM
CONSUMPTION DATA
Temperature
Programme
Cotton 95 5.0 — 72 1.60 1:55
Cotton 60 5.0 — 72 1.20 1:55
Cotton 40 5.0 — 72 0.60 1:55
Cotton 60 2.5 Half Load 52 0.60 1:55
Synthetics 60 2.0 — 65 0.60 1:40
Synthetics 40 2.0 — 65 0.40 1:40
Delicates 40 1.5 — 65 0.50 0:55
Wool 30 1.0 — 72 0.30 0:45
Prewash cycle increases programme duration approximately 15 min. Consumption values were measured in normalized
conditions in compliance with Standard IEC 60 456.
Consumption data in the home may vary with respect to the values in the table in relation to the water supply pressure and
temperature, the load and the type of wash.
ADD DETERGENTS, CLOSE THE DOOR AND SELECT
THE PROGRAMME
Add the detergents as described in the programme
table or in the chapter “Detergents and Additives” in
the booklet.
1. Open the tap.
2. Set the
3. Set the
4.
5. Check that the door is well closed and turn on the
SELECT ANY DESIRED OPTION
“Half Load” button
• Reduces water consumption, above all during rinsing.
• Suitable for lightly-soiled laundry and small loads
(max 3 kg).
Note:
programme selector
programme.
temperature selector
temperature.
Special options
washing machine by pressing the
button. The indicator lights up, indicating that
the washing machine is on.
Reduce the detergent quantity.
can be selected.
Selector
(°C)
to the desired
to the desired
Load
(kg)
“ON/OFF”
Options Water
“No Spin” button
• Especially for delicate garments to avoid wear
Note:
programmes a short spin cycle is provided in any
case, even if the exclusion has been selected, in
order to optimize rinsing results.
“Rinse Hold” button
• The laundry remains in the last rinse water
• This option is particularly recommended for the
• This function is particularly useful if you want to
Terminate the “Rinse Hold” option:
• Press the “Rinse Hold” button again; the
• If you do not wish to spin the clothes, turn the
Energy
(l)
and tear caused by the spin.
with the “Cotton” and “Synthetics”
without progressing to the final spin cycle to
avoid creasing and prevent colours from
changing.
programme “Synthetics” or “Delicates”.
postpone spinning to a later time, or if you want
to drain only.
programme will terminate automatically with the
final spin cycle for the present wash programme.
programme selector knob to the “Drain”
programme.
(kWh)
Approx.
Programme
Duration
(hours:minutes)
PROGRAMME CHANGE
To reselect a programme when a cycle has already
begun:
1. Switch off the appliance by pressing the
ON/OFF
“
2. Select the new programme.
3. Start the programme by pressing the “
button.
PROGRAMME END
1. At the end of the programme the programme
selector moves to the stop position.
2. To unload the machine wait for the door to
unlock (about 1 minute).
3. Switch off the appliance, open the door and
take out the laundry.
4. Close the tap and leave the door ajar to allow
the drum to dry out.
” button.
ON/OFF
NOTES AND INDICATIONS FOR USE
WATER LEVEL
•
It may not be visible as the cycle is optimized
for a minimum water consumption without
compromising washing results.
SPIN SPEED CONTROL
•
”
Spin speed may be reduced automatically or
may even be excluded in the case of small
loads with highly absorbent garments (e.g.
bathrobes, bathmat).
This control avoids cloth and machine
damage and excessive vibrations and
consequent noise produced by the machine
due to load unbalance: by selecting high spin
speeds the noise level increases.
MOTOR NOISE
•
The running noises of the new, electronicallycontrolled motor are not the same as the
ones you are used to from your old appliance.
Don’t be surprised - modern technology has a
modern sound.
CLEANING THE FILTER
•
To ensure an impeccable function of the
pump, check the filter regular and clean it if
necessary.
Black Process Plate
Whirlpool is a registered trademark of Whirlpool USA.
5019 301 05410
Loading...