Whirlpool WM1854 A W PRODUCT SHEET

PRODUCT SHEET

GB

10b

10a

9

10

8

1

3

4

2

5

7

6

Refrigerator Compartment

Crisper drawer

1.

Shelves / Shelf area

2.

Control panel

3.

Upper door tray

4.

Door trays

5.

Bottle rack

6.

Removable bottle restrainer (if present)

7.

Rating plate (at the side of crisper drawer)

8.

Light, positioned either below the control

9.

panel or inside the appliance (depending on model)

Fan with filter (if provided), see relevant

10.

instructions for filter

: The number of shelves and type of accessories may vary, depending on the model.

Notes

All shelves, door trays and racks are removable.

Important: Refrigerator accessories must not be washed in a dishwasher.

5019 635 01012

PL CZ SK RUS

H

BG RO

GB

Refrigerator compartment controls

(depending on the model)

B

G

F

Display indicating the set temperature. If the

A.

display indicating the set temperature blinks,
contact the After-sales Service.

ON/OFF button.

B.

Temperature selection button.

C.

Fast Cooling button. The function switches off

D.

automatically after approximately 6 hours.

A

H

C

DE

Fast Cooling function activated.

E.

Vacation” function activation button”: for

F.

prolonged disuse.
Vacation” function activation indicator”.

G.

“6th Sense” activation LED (blue) /“Dynamic

H.

Intelligence” (if provided). Indicates that the “6th Sense”
/“Dynamic Intelligence” function is active (see paragraph
“6th Sense function”/“Dynamic Intelligence”).

The refrigerator can operate at ambient temperatures be

tween +10°C and +38°C. Optimal performance is obtained

at temperatures between +16°C and +38°C.

: Ambient air temperature, the frequency of door opening and the position of the

Note

appliance can affect the internal

temperatures of the refrigerator. These factors must be taken into account when setting the thermostat.

Fan with a button

The fan gives more even temperature distribution inside the refrigerator compartment, allowing better preservation
of stored food.
To switch on the fan press the button (10a). It is advisable to activate the fan when the ambient air temperature is
over 27 ÷ 28°C or if you perceive drops of water on the glass shelves or in the severe humidity conditions.

Note: Do not obstruct the air intake area with food items (10b).
The fan will run ONLY when the compressor is in operation.
Remember to turn off the fan when there is a lower ambient air temperature.

Removing the light bulb How to replace the light bulb

Unscrew the light bulb as shown in the figure.

1.

5019 635 01012

PL CZ SK RUS

H

Loosen the screw and remove the lamp cover.

1.

When replacing the bulb, bear in mind that this

2.

appliance is fitted with a special bulb (15W with
bayonet fitting); to replace do not unscrew, but pull
towards the inside of the appliance (as indicated by
the arrow).

Refit the lamp cover and secure it with the screw.

3.

BG RO

GB

Printed in Italy 03/09