Whirlpool WHCF-SUF, WHCF-SUFC User Manual

Models
WHCF-SUF and WHCF-SUFC
1 Y ear Limited Warranty
CUNO Incor porated warrants the original purchaser-consumer of its Product that is free of defects in materials and workmanship.Any defect, malfunction, or other failure of the Product to conform to this warranty will be remedied by Warrantor in the manner provided below.
This Warranty, together with any warranties implied by law, shall be limited to a duration of one (1) year from the original date of purchase by the consumer.
This Warranty does not apply to defects that result from abuse, misuse, alter­ation or damage not caused by CUNO Incorporated.
THIS WARRANTY DOES NOT COVER, AND IS INTENDED TO EXCLUDE ANY LIABILITY ON THE PART OF WARRANTOR, WHETHER UNDER THIS WAR­RANTY OR UNDER ANY WARRANTY IMPLIED BY LAW, FOR ANY INDIRECT OR CONSEQUENTIAL DAMAGES FOR BREACH HEREOF OR THEREOF.
Note: Some states prohibit limitations on the duration of implied warranties and on the exclusion of indirect or consequential damages; and so the limitation on implied warranties and on incidental and consequential damages may not be applicable to you.
RESPONSIBILITY OF WARRANTOR
CUNO Incor porated’s responsibility under this warranty shall be to repair at its expense, at no charge to the original purchaser-consumer any product that is actually defective, malfunctioning or otherwise in violation of this warranty.If CUNO Incor porated for any reason cannot repair a Product covered hereby within two (2) weeks after receipt of the original purchaser-consumer’s notifica­tion of a Warranty claim and the Product, then CUNOIncorporated’s responsi­bility shall be, at its option, either to replace the defective Product with a compa­rable new unit at no charge to the consumer or to refund the full purchase price. CUNO Incor porated’s obligations of repair, replacement, or refund are condi­tioned upon the return of the defective product to CUNO Incorporated.
If any Product hereby is actually defective within the terms of this Warranty, then CUNO Incor porated will bear all the reasonable and proper shipping and mail­ing charges actually incurred in the consumer’s return of the Product set forth herein. If the Product proves not to be defective within the terms of this Warranty, then all costs and expenses in connection with the processing of the consumer’s claim hereunder shall be borne by the consumer.
RESPONSIBILITY OF THE CONSUMER The original purchaser-consumer’s sole responsibility in the instance of a war­ranty claim shall be to notify CUNO Incorporated of the defect, malfunction or other manner in which the terms of this Warranty are violated.You may secure performance or obligations hereunder by (in writing):
1. Identifying the Product involved (by model or serial number or other sufficient description that will allow Warrantor to determine which product is defective).
2. Specifying where, when and from whom the Product was purchased.
3. Describing the nature of the defect, malfunction or other violation of this Warranty.
4. Return the Product, with the above information to:
CUNO Incorporated, 400 Research Parkway,Meriden, CT 06450, U.S.A.
THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS, AND YOU MAY
ALSO HAVE OTHER RIGHTS, WHICH VARY FROM STATE TO STATE.
UNDER SINK MAIN FAUCET
FILTRATION
UltraEase™Filtration System and
UltraEase™PLUS Filtration System
Installation, Use & Care Guide
8559764/INSTR7014 1203
04/04
INSTR7014 1203 Whirlpool Water Products
400 Research Parkway, P.O. Box 765
8559764 Meriden, CT 06450 U.S.A.
Filter Replacement:
The contaminants or other substances removed or reduced by this water filter are not necessarily in all users’ water.
Filter life varies depending on local water conditions and the vol­ume of water used.We recommend that you change your filter every 6 months.However, it can be replaced earlier if there is a drop in pressure at the faucet.
To reduce Chlorine Taste and Odor and Cysts, use Replacement Filter: WHCF-SRC
To reduce Sediment and Chlorine Taste and Odor, use Replacement Filter: WHCF-SR
Do not use with water that is microbiologically unsafe or of unknown quali­ty without adequate disinfection before or after the system. Systems certified for Cyst reduction may be used on disinfected water that may contain filterable cysts.EPA Establishment #070595-CT-001
Filter Cartridge Replacement Instructions:
To remove old filter: Turn filter 1/4 turn to the left.Top surface
of filter will move away from the bottom of the head. Pull filter down to disengage.
T
o insert new filter: Push filter into Filter Head/Bracket.Turn filter
1/4 turn to the right until it stops.Top surface of filter will become flush with bottom of the Filter Head/Bracket when fully engaged. Label will face forward.
Flush filter for 5 minutes to remove air.
Troubleshooting Guide
Water Leaks at Threaded Fittings: Tighten slightly more until leak stops. Water leaks at Push-in Connections Push tubing in as far as it will go.If leaking continues, shut off
water at the original valve and remove water line by pushing in on the connector collar while pulling the tubing away.Use a catch basin (See Push-in Fittings Section) Inspect tubing for cracks and scratches.If tubing is cracked or scratched, cut that portion away and reinsert tubing into fitting.
Make sure tubing is cut straight.If not, recut.
Help Line 1-866-245-9474
Monday Through Friday
8:00 a.m. to 9:00 p.m. EST
or write us at
Whirlpool Water Products
PO Box 765
Meriden, CT 06450
® Registered trademark/TM Trademark of Whirlpool, USA,
used under license.
© 2004 Whirlpool Corporation.All rights reserved.
® Marca registrada/TM Marca de comercio de Whirlpool, USA,
usado bajo licencia.
Todos los derechos reservados.
#2 Phillips Mounting Screws
Filter Head/Bracket
Filter Cartridge
3/8" Tubing
3/8" Compression Hex Nut
3/8" Ferrule
3/8" T
ube Insert
3/8"x1/2" Faucet Adapter
Hot
Cold
Parts and Materials Included:
1. Filter Cartridge
2. Filter Head/Bracket
3. 5’ of 3/8” Tubing
4. 3/8” x 1/2” Faucet Adapter Kit contains components necessary to connect 3/8” outlet tube to 1/2”
faucet fitting and 3/8” water supply.If you have any other size faucet connection, you may need other parts for installation as required.
5. 3/8” Compression Hex Nut
6. 3/8” Ferrule
7. 3/8”Tube Insert
8. #2 Phillips Mounting Screws
Tools Needed:
Gather the required tools before starting installation. Read and fol­low the instructions provided with any tools listed here.
• Phillips Head Screwdriver • Adjustable Wrench
• Utility knife or tube cutter for copper tubing
Installation Requirements:
• Proper ly tighten all fittings to ensure a leak-free assembly.
• Install in a location that is not susceptible to freezing tempera-
tures as damage to the housing could occur.
• Install away from direct sunlight as prolonged exposure to light
can weaken plastic components.
• Some local codes may require the use of a licensed plumber or
certified installer when disrupting a potable water line. Determine and follow any and all local codes and requirements.
• Allow a minimum of 2 1/2” clear space below unit to facilitate
filter change.
This filter can be used at any sink where water is used for drinking.
Installation Instructions
For Use With Cold Water Only NOTE: Remove items from under the sink.Place a catch basin there
to collect small amounts of water that may run out when disconnecting water supply lines.
1.Turn off cold water supply valve and remove existing water supply tubing and/or fitting.
2. Select and mark a location under the sink that allows access for fil­ter change.
3. Using filter head/bracket as a guide, fasten Filter Head/Bracket to wall with #2 Phillips mounting screws supplied.
Mark hole locations so that there is 1 1/2” between the screws (see Figure 1), from center of each screw.When installed, filter bottom should be at least 2 1/2” from sink cabinet floor to facilitate cartridge change. Install screws, but only halfway, so you can easily slip the bracket to wall before firmly setting screws.
Figure 1
4. Deter mine length of tubing required from filter head/bracket to faucet and from water supply line to filter head/bracket by holding tubing in place ensuring it is of appropriate length. Do not kink tubing as this will impede
Correct
water flow. If necessary, loop tubing around to avoid it being kinked.
Cut tubing straight with a utility knife or tube cutter (for copper piping).(See Figure 2.)
Incorrect
Figure 2
5. Install faucet adapter fitting to faucet.This should be a snug fit. Do not overtighten. (See Figure 3.)
Figure 3
“Using Push-In Fittings”
To Attach Tubing
Push tubing in as far as it will go.Tubing must be inserted past o-ring and hit backstop.Pull tube to ensure it is secured.
Backstop
6. Referring to section “Using Push-In Fittings,” insert a sec­tion of the plastic tubing into faucet adapter fitting, making sure end of tubing is firmly seat­ed to backstop.
B
A
Inlet
Hold the filter head/bracket away from the wall, press other end of tubing into outlet side as indicated by arrow on Filter Head/Bracket.(See Figure 4,
Outlet to Equipment
Figure 4
A.)
7.Take the remaining section of tubing, slide the compres­sion hex nut and 3/8”ferrule (tapered end away from com­pression hex nut) onto the tubing and put in the tube insert (see Figure 5). Fasten this assembly onto 3/8” cold water supply outlet. Do not
Figure 5
overtighten (see Figure 6). Overtightening will cause tub­ing to separate from fitting. Connect other end to the inlet side as indicated by the arrow on Filter Head/Bracket (see Figure 4, B).
8. Place Filter Head/Bracket
Figure 6
holes over mounting screws, press down to lock into place and tighten screws for a snug fit.
9. Insert filter into Filter Head/Bracket.Turn filter 1/4 turn to the right until it stops.Top surface of filter will become flush with bottom of the Filter Head/Bracket when fully engaged. Label will face forward.
10.Turn on water and open faucet to flush air from the system. Run water for 5 minutes to flush out air. Check for leaks.
Close sink faucet. System is now ready for use!
To Release Tubing
Collet
Push in grey collet to release tubing.With collet held, pull tubing straight out.
Loading...
+ 1 hidden pages