WGD97HEX
PRODUCT MODEL NUMBERS
WGD94HEX, WGD95HEX, WGD97HEX
Gas Dryer
38
(968 mm)
(18 mm)
53/4"*
(146 mm)
Front view:
27"
(686 mm)
1
"
/8
* Approx. measurement
3
/4
"*
Back view:
61/4"
(159 mm)
Water
Vent
NOTE: Most installations require a minimum 5" (102 mm)
clearance behind the dryer for the exhaust vent with elbow.
See “Venting Requirements”.
Recommended installation clearances (dryer only):
7
29
/8"*
(759 mm)
1
/2"*
3
(89 mm)
Side view:
18" min.
(457 mm)
3"
(76 mm)
48 in.2 min.
(310 cm
2
)
3
/4"*
(18 mm)
Gas
(654 mm)
253/4"
3
14
/8"
(365 mm)
1
/8"*
6
(156 mm)
5"
(127 mm)
1"
(25 mm)
(76 mm)
1"
(25 mm)
3"
24 in.2 min.
(155 cm2)
Installation spacing for recessed area
or closet installation
All dimensions show recommended and minimum spacing allowed.
■ Additional spacing should be considered for ease of
installation and servicing.
■ Additional clearances might be required for wall, door, oor moldings, dryer venting, and gas line.
■ Additional spacing should be considered on all sides
of the dryer to reduce noise transfer.
■ For closet installation, with a door, minimum ventilation openings in the top and bottom of the door are required. Louvered
doors with equivalent ventilitation openings are acceptable.
■ Companion appliance spacing should also be considered.
Loading...