Whirlpool WGD6400SW2, WGD6400SG2, WGD6400SB2, WGD6200SW2 Owner’s Manual

cabrlo

FABRIC CARE SYSTEM

SYSTEME DE SOIN DES TISSUS

CABRIOTMFABRIC

CARESYSTEMGAS

DRYER

W _ _"!

For questions about features, operation/performance,

parts, accessories or service call: 1-800-253-1301

In Canada, call: 1-800-807-6777

www.whirlpool.com or www.whirlpool.ca

p Ik

SECHEUSEA GAZ

CABRIOTMAVEC

SYSTEMEDESOINDES

or visit our website at

TISSUS

W10150626A

Au Canada, pour assistance, installation ou service, composez le :

Para obtener acceso al Manual de uso y cuidado en

espafiol, o para obtener informacion adicional acerca

de su producto, visite: www.whirlpool.com.

Tenga listo su nQmero de modelo completo. Puede

encontrar el nQmero de modelo y de serie dentro de la

cavidad superior de la puerta.

Table of Contents/Table des matieres ................. 2

1-800-807-6777

ou visitez notre site internet h

www.whirlpool.ca

TABLEOFCONTENTS

TABLEDESMATIERES

DRYER SAFETY .............................................................................. 3

INSTALLATION INSTRUCTIONS .................................................. 5

Tools and Parts ............................................................................ 5

Location Requirements ............................................................... 5

Electrical Requirements ............................................................... 6

Gas Supply Requirements ........................................................... 7

Venting Requirements .................................................................. 8

Plan Vent System ......................................................................... 9

Install Vent System ..................................................................... 10

Install Leveling Legs ................................................................... 10

Make Gas Connection ............................................................... 11

Connect Vent .............................................................................. 11

Level Dryer ................................................................................. 11

Reverse Door Swing .................................................................. 12

Complete Installation ................................................................. 13

DRYER USE .................................................................................. 14

Starting Your Dryer ..................................................................... 14

Stopping, Pausing or Restarting ................................................ 15

Drying and Cycle Tips ................................................................ 15

Status Lights .............................................................................. 15

Cycles ......................................................................................... 16

Modifiers ..................................................................................... 17

Options ....................................................................................... 17

End of Cycle Signal .................................................................... 18

Changing Cycles, Modifiers and Options .................................. 18

Drying Rack Option .................................................................... 18

DRYER CARE ............................................................................... 19

Cleaning the Dryer Location ...................................................... 19

Cleaning the Lint Screen ............................................................ 19

Cleaning the Dryer Interior ......................................................... 19

Removing Accumulated Lint ...................................................... 19

Vacation and Moving Care ......................................................... 20

Changing the Drum Light ........................................................... 20

TROUBLESHOOTING .................................................................. 20

ASSISTANCE OR SERVICE ......................................................... 22

ACC ESSO R IES............................................................................. 22

WARRANTY .................................................................................. 23

SI_CURITI_ DE LA SI_CHEUSE .................................................... 24

INSTRUCTIONS D'INSTALLATION ............................................. 26

Outillage et pieces ...................................................................... 26

Exigences d'emplacement ......................................................... 26

Specifications electriques .......................................................... 27

Alimentation en gaz .................................................................... 28

Exigences concernant I'evacuation ........................................... 29

Planification du systeme d'evacuation ...................................... 30

Installation du systeme d'evacuation ......................................... 32

Installation des pieds de nivellement ......................................... 32

Raccordement au gaz ................................................................ 32

Raccordement du conduit d'evacuation ................................... 33

Reglage de I'aplomb de la secheuse ......................................... 33

Inversion du sens d'ouverture de la porte ................................. 33

Achever I'installation .................................................................. 35

UTILISATION DE LA SI_CHEUSE ................................................ 36

Mise en marche de la secheuse ................................................ 36

Arr_t, pause ou remise en marche ............................................. 37

Conseils pour le sechage et les programmes ........................... 37

T6moins lumineux ...................................................................... 38

Programmes ............................................................................... 38

Modificateurs .............................................................................. 39

Options ....................................................................................... 40

Signal de fin de programme ....................................................... 40

Changement des programmes, modificateurs et options .........41

Option de grille de sechage ....................................................... 41

ENTRETIEN DE LA SI_CI-IEUSE .................................................. 42

Nettoyage de I'emplacement de la secheuse ........................... 42

Nettoyage du filtre a charpie ...................................................... 42

Nettoyage de I'interieur de la secheuse ..................................... 43

Retrait de la charpie accumulee ................................................ 43

Precautions & prendre pour les vacances et avant un

dem6nagement .......................................................................... 43

Changement de I'ampoule d'eclairage du tambour .................. 43

DI_PAN NAGE................................................................................. 44

ASSISTANCE OU SERVICE ......................................................... 46

ACCESSOIRES ............................................................................. 46

GARANTIE ..................................................................................... 47

DRYERSAFETY

Your safety and the safety of others are very important.

We have provided many important safety messages in this manual and on your appliance. Always read and obey all safety

messages.

This is the safety alert symbol. This symbol alerts you to potential hazards that can kill or hurt you and others.

All safety messages will follow the safety alert symbol and either the word "DANGER" or "WARNING."

These words mean:

You can be killed or seriously injured if you don't immediately

follow instructions.

You can be killed or seriously injured if you don't follow instructions.

All safety messages will tell you what the potential hazard is, tell you how to reduce the chance of injury, and tell you what can happen if the instructions are not followed.

WARNING: For your safety, the information in this manual must be followed to minimize the risk of fire or explosion, or to prevent property damage, personal injury, or death,

- Do not store or use gasoline or other flammable vapors and liquids in the vicinity of this or any other appliance.

- WHAT TO DO IF YOU SMELL GAS:

• Do not try to light any appliance.

• Do not touch any electrical switch; do not use any phone in your building.

• Clear the room, building, or area of all occupants.

• Immediately call your gas supplier from a neighbor's phone. Follow the gas supplier's

instructions.

• If you cannot reach your gas supplier, call the fire department.

- Installation and service must be performed by a qualified installer, service agency, or the gas supplier,

In the State of Massachusetts, the following installation instructions apply: [] Installations and repairs must be performed by a qualified or licensed contractor, plumber, or gasfitter qualified or licensed by

the State of Massachusetts.

[] If using a ball valve, it shall be a T-handle type. [] A flexible gas connector, when used, must not exceed 3 feet.

IMPORTANT SAFETY INSTRUCTIONS

WAR NiNG" To reduce the risk of fire, electric shock, or injury to persons when using the dryer, follow basic precautions,

including the following:

[] Read all instructions before using the dryer. [] Do not place items exposed to cooking oils in your dryer.

Items contaminated with cooking oils may contribute to

a chemical reaction that could cause a load to catch fire.

[] Do not dry articles that have been previously cleaned in,

washed in, soaked in, or spotted with gasoline, dry- cleaning solvents, or other flammable or explosive

substances as they give off vapors that could ignite or explode.

[] Do not allow children to play on or in the dryer. Close

supervision of children is necessary when the dryer is used near children.

[] Before the dryer is removed from service or discarded,

remove the door to the drying compartment.

[] Do not reach into the dryer if the drum is moving. [] Do not install or store the dryer where it will be exposed

to the weather.

[] Do not tamper with controls.

SAVE THESE INSTRUCTIONS

[] Do not repair or replace any part of the dryer or attempt

any servicing unless specifically recommended in this Use and Care Guide or in published user-repair instructions that you understand and have the skills to carry out.

[] Do not use fabric softeners or products to eliminate static

unless recommended by the manufacturer of the fabric softener or product.

[] Do not use heat to dry articles containing foam rubber or

similarly textured rubber-like materials.

[] Clean lint screen before or after each load. [] Keep area around the exhaust opening and adjacent

surrounding areas free from the accumulation of lint, dust, and dirt.

[] The interior of the dryer and exhaust vent should be

cleaned periodically by qualified service personnel.

[] See installation instructions for grounding requirements.

iMPORTANT: The gas installation must conform with local codes, or inthe absence of local codes, with the National Fuel Gas Code, ANSI Z223.1/NFPA 54 or the Canadian Natural Gas and Propane Installation Code, CSA B149.1.

The dryer must be electrically grounded in accordance with local codes, or in the absence of local codes, with the National

Electrical Code, ANSI/NFPA 70 or Canadian Electrical Code, CSA C22.1.

INSTALLATIONINSTRUCTIONS

Gather the required tools and parts before starting installation. Read and follow the instructions provided with any tools listed

here.

8" or 10" pipe wrench • 8" or 10" adjustable

wrench (for gas • connections) •

Flat-blade screwdriver

Adjustable wrench that

opens to 1" (2.5 cm) or hex-head socket wrench

(for adjusting dryer feet) Level

Parts supplied:

Remove parts package from dryer drum. Check that all parts were included.

4 leveling legs

Parts needed:

Check local codes and consult gas supplier. Check existing gas supply, electrical supply and venting, and read "Electrical Requirements," "Gas Supply Requirements" and "Venting Requirements" before purchasing parts.

Mobile home installations require special parts (listed following) that may be ordered by calling the dealer from whom you purchased your dryer. For information on ordering, please refer to the "Assistance or Service" section. You may also contact the dealer from whom you purchased your dryer.

• Mobile home installation kit. Ask for Part Number 346764.

• Metal exhaust system hardware.

¼"nut driverorsocket wrench

Knife

Vent clamps

Pipe-joint compound resistant to LP gas

Caulking gun and compound (for installing new exhaust vent)

Pliers

Explosion Hazard

Keep flammable materials and vapors, such as gasoline, away from dryer.

Place dryer at least 18 inches (46 cm) above the floor

for a garage installation.

Failure to do so can result in death, explosion, or fire.

You will need

• A location that allows for proper exhaust installation. See "Venting Requirements."

• A separate 30-amp circuit.

• A grounded electrical outlet located within 2 ft (61 cm) of either side of the dryer. See "Electrical Requirements."

• A sturdy floor to support the total weight (dryer and load) of 200 Ibs (90.7 kg). The combined weight of a companion appliance should also be considered.

• A level floor with a maximum slope of 1" (2.5 cm) under entire dryer.

Do not operate your dryer at temperatures below 45°F (7°C). At lower temperatures, the dryer might not shut off at the end of an automatic cycle. Drying times can be extended.

The dryer must not be installed or stored in an area where it will

be exposed to water and/or weather. Check code requirements. Some codes limit, or do not permit,

installation of the dryer in garages, closets, mobile homes or sleeping quarters. Contact your local building inspector.

NOTE: No other fuel-burning appliance can be installed in the same closet as a dryer.

Installation Clearances

The location must be large enough to allow the dryer door to

open fully.

Dryer Dimensions

5z21./_"crn)

*Most installations require a minimum 5" (12.7 cm) clearance

behind the dryer for the exhaust vent with elbow. See "Venting Requirements."

Installation spacing for recessed area or closet installation The following spacing dimensions are recommended for this

dryer. This dryer has been tested for spacing of 0" (0 cm) clearance on the sides and rear. Recommended spacing should be considered for the following reasons:

• Additional spacing should be considered for ease of installation and servicing.

• Additional clearances might be required for wall, door and floor moldings.

• Additional spacing should be considered on all sides of the dryer to reduce noise transfer.

• For closet installation, with a door, minimum ventilation openings in the top and bottom of the door are required. Louvered doors with equivalent ventilation openings are acceptable.

• Companion appliance spacing should also be considered.

• Additional spacing is required if you exhaust out the rear of the dryer to either the right or left side.

_f 3"*

(7.6cm)

¢6om)

(45.7cm)

1"-_ _ _"-_ _1" 1"*I_2_,4"_15"÷

(2.5cm) (73.7crn) (2.5crn) (2.5crn)(74.3cm)(12.7crn)

A B

A. Recessed area

B. Side view - closet or confined area

C. Closet door with vents

481n.2._

(310cm2)

24in.z*

(155cm2)-

*Required spacing

Mobile home - Additional installation requirements This dryer is suitable for mobile home installations. The

installation must conform to the Manufactured Home Construction and Safety Standard, Title 24 CFR, Part 3280

(formerly the Federal Standard for Mobile Home Construction and Safety, Title 24, HUD Part 280) or Standard CAN/CSA-Z240

MH.

Mobile home installations require:

• Metal exhaust system hardware, which is available for purchase from your dealer.

• Mobile home Installation Kit Part Number 346764. See "Tools and Parts" section for information on ordering.

• Special provisions must be made in mobile homes to introduce outside air into the dryer. The opening (such as a nearby window) should be at least twice as large as the dryer exhaust opening.

Electrical Shock Hazard Plug into a grounded 3 prong outlet. Do not remove ground prong.

Do not use an adapter. Do not use an extension cord.

Failure to follow these instructions can result in death,

fire, or electrical shock.

120 Volt, 60 Hz., AC only, 15- or 20-amp fused electrical supply is required. A time-delay fuse or circuit breaker is recommended. It is also recommended that a separate circuit serving only this dryer be provided.

GROUNDING iNSTRUCTiONS

[] For a grounded, cord-connected dryer:

This dryer must be grounded. In the event of malfunction or

breakdown, grounding will reduce the risk of electric shock by providing a path of least resistance for electric current.

This dryer is equipped with a cord having an equipment-

grounding conductor and a grounding plug. The plug must be plugged into an appropriate outlet that is properly

installed and grounded in accordance with all local codes and ordinances.

WARNING: Improper connection of the equipment-

grounding conductor can result in a risk of electric shock. Check with a qualified electrician or service representative

or personnel if you are in doubt as to whether the dryer is properly grounded. Do not modify the plug provided with the dryer: if it will not fit the outlet, have a proper outlet installed by a qualified electrician.

SAVE THESE INSTRUCTIONS

Explosion Hazard

Use a new CSA (nternational approved gas supply line.

Install a shut=off valve. Securely tighten all gas connections.

if connected to LP, have a qualified person make sure gas pressure does not exceed 13" (33 cm) water

column.

Examples of a qualified person include: licensed heating personnel,

authorized gas company personnel, and authorized service personnel.

Failure to do so can result in death, explosion, or fire.

Gas Type

• 3/8"flare x 3/8"NPT adapter fitting between dryer pipe and 3/8" approved tubing.

• Lengths over 20 ft (6.1 m) should use larger tubing and a different size adapter fitting.

• If your dryer has been converted to use LP gas, 3/8"LP compatible copper tubing can be used. If the total length of the supply line is more than 20 ft (6.1 m), use larger pipe.

NOTE: Pipe-joint compounds that resist the action of LP gas must be used. Do not use TEFLON ®ttape.

• Must include a shutoff valve: In the U.S.A.: An individual manual shutoff valve must be installed within

six (6)feet (1.8 m) of the dryer in accordance with the National Fuel Gas Code, ANSI Z223.1.

In Canada: An individual manual shutoff valve must be installed in

accordance with the B149.1, Natural Gas and Propane Installation Code. It is recommended that an individual

manual shutoff valve be installed within six (6)feet (1.8 m) of the dryer.

The location should be easy to reach for opening and closing.

A C E

Natural Gas:

This dryer is equipped for use with Natural gas. It is design- certified by CSA International for LP (propane or butane) gases with appropriate conversion.

• Your dryer must have the correct burner for the type of gas in your home. Burner information is located on the rating plate in the door well of your dryer. If this information does not agree with the type of gas available, contact your dealer or call the phone numbers referenced on the front page of this

manual.

LP gas conversion: Conversion must be made by a qualified technician.

No attempt shall be made to convert the appliance from the gas specified on the model/serial rating plate for use with a different gas without consulting your gas company. For information on ordering an LP conversion kit, please refer to the "Assistance or

Service" section. Ask for Part Number 49572.

Gas Supply Line:

• Must include 1/8"NPT minimum plugged tapping accessible for test gauge connection, immediately upstream of the gas connection to the dryer (see illustration).

• 1/2"IPS pipe is recommended.

• 3/8"approved aluminum or copper tubing is acceptable for lengths under 20 ft (6.1 m) if local codes and gas supplier permit.

• If you are using Natural gas, do not use copper tubing.

B D

A. _" flexible gas connector

B. _" pipe to flare adapter fitting C. _" NPT minimum plugged tapping D. 7/2"NPT gas supply fine

E. Gas shutoff valve

Gas supply connection requirements

• Use an elbow and a 3/8"flare x 3/8"NPT adapter fitting between the flexible gas connector and the dryer gas pipe, as needed to avoid kinking.

• Use only pipe-joint compound. Do not use TEFLON ®ttape.

• This dryer must be connected to the gas supply line with a listed flexible gas connector that complies with the standard for connectors for gas appliances, ANSI Z21.24 or CSA 6.10.

1-®TEFLON is a registered trademark of E.I. Du Pont De Nemours and Company.

Burner Input Requirements:

If this is a new vent system

Elevations above 10,000 ft (3,048 m):

• When installed above 10,000 ft (3,048 m) a 4% reduction of the burner Btu rating shown on the model/serial number plate is required for each 1,000 ft (305 m) increase in elevation.

Gas Supply Pressure Testing

• The dryer must be disconnected from the gas supply piping system during pressure testing at pressures greater than 1/2psi.

Dryer Gas Pipe

• The gas pipe that comes out through the rear of your dryer has a 3/8"male pipe thread.

2 It

(5.1crn)

A ¸ 3/4-

(1.9crn)

A.3/8"NPTdryer pipe

Fire Hazard

Use a heavy metal vent. Do not use a plastic vent.

Do not use a metal foil vent. Failure to follow these instructions can result in death

or fire.

Vent material

• Use a heavy metal vent. Do not use plastic or metal foil vent.

• 4" (10.2 cm) heavy metal exhaust vent and clamps must be used. DURASAFE TM venting products are recommended.

4" (10.2cm) heavymetal exhaust vent

DURASAFE TM vent products can be purchased from your dealer or by calling Whirlpool Parts and Accessories. For more information, see the "Assistance or Service" section.

Rigid metal vent

• For best drying performance, rigid metal vents are recommended.

• Rigid metal vent is recommended to avoid crushing and kinking.

Flexible metal vent

• Flexible metal vents are acceptable only if accessible for cleaning.

• Flexible metal vent must be fully extended and supported when the dryer is in its final location.

• Remove excess flexible metal vent to avoid sagging and kinking that may result in reduced airflow and poor performance.

• Do not install flexible metal vent in enclosed walls, ceilings or floors.

Elbows

45° elbows provide better airflow than 90° elbows.

WARNING: To reduce the risk of fire, this dryer MUST BE

EXHAUSTED OUTDOORS. IMPORTANT: Observe all governing codes and ordinances.

The dryer exhaust must not be connected into any gas vent, chimney, wall, ceiling or a concealed space of a building.

If using an existing vent system

• Clean lint from the entire length of the system and make sure exhaust hood is not plugged with lint.

• Replace any plastic or metal foil vent with rigid or flexible heavy metal vent.

• Review Vent system chart. Modify existing vent system if necessary to achieve the best drying performance.

Good Better

Clamps

• Use clamps to seal all joints.

• Exhaust vent must not be connected or secured with screws or other fastening devices that extend into the interior of the

duct. Do not use duct tape.

Clamp

Exhaust

Recommended hood styles are shown here.

(10.2cm)

A. Louvered hood style

B. Box hood style

The angled hood style (shown here) is acceptable.

Standard exhaust installation with rigid metal or flexible metal vent

Alternate installations for close clearances

Venting systems come in many varieties. Select the type best for your installation. Two close-clearance installations are shown.

Refer to the manufacturer's instructions.

(10.2cm)__

• An exhaust hood should cap the vent to keep rodents and insects from entering the home.

• Exhaust hood must be at least 12" (30.5 cm) from the ground or any object that may be in the path of the exhaust (such as flowers, rocks or bushes, snow line, etc.).

• Do not use an exhaust hood with a magnetic latch.

improper venting can cause moisture and lint to collect indoors, which may result in:

[] Moisture damage to woodwork, furniture, paint, wallpaper,

carpets, etc.

[] Housecleaning problems and health problems.

Choose your exhaust installation type

Recommended exhaust installations Typicalinstallationsvent the dryer from the rear of the dryer.

!..... i....

A B C

A. Over-the-top installation (also available with one

offset elbow)

B.Periscope installation

C. Rear exhaust installation to left or right side

NOTE: The following kits for close clearance alternate installations are available for purchase. Please see the

"Assistance or Service" section to order.

• Over-the-Top Installation: Part Number 4396028

Periscope Installation (For use with dryer vent to wall vent mismatch):

Part Number 4396037 - 0" (0 cm) to 18" (45.72 cm) mismatch Part Number 4396011 - 18" (45.72 cm) to 29" (73.66 cm)

mismatch Part Number 4396014 - 29" (73.66 cm) to 50" (127 cm)

mismatch Rear exhaust installation to left or right side:

Part Number 8212504

Special provisions for mobile home installations

The exhaust vent must be securely fastened to a noncombustible

portion of the mobile home structure and must not terminate beneath the mobile home. Terminate the exhaust vent outside.

A. Dryer B. Elbow

C. Wall

D. Exhaust hood

|-i CG

_1.................................

...............H

E.Clamps

E Rigid metal or flexible metal vent

G. Vent length necessary to connect elbows

H. Exhaust outlet

Determine vent path

• Select the route that will provide the straightest and most direct path outdoors.

• Plan the installation to use the fewest number of elbows and turns.

• When using elbows or making turns, allow as much room as possible.

• Bend vent gradually to avoid kinking.

• Use the fewest 90° turns possible.

Determine vent length and elbows needed for best drying performance

• Use the following Vent system chart to determine type of vent material and hood combinations acceptable to use.

NOTE: Do not use vent runs longer than those specified in the Vent system chart. Exhaust systems longer than those specified will:

• Shorten the life of the dryer.

• Reduce performance, resulting in longer drying times and

increased energy usage.

The Vent system chart provides venting requirements that will help to achieve the best drying performance.

..... _ _ _7_w_ _S__

...... 9

Excessive Weight Hazard

Use two or more people to move and install dryer. Failure to do so can result in back or other injury.

1. To protect the floor, use a large flat piece of cardboard from the dryer carton. Place cardboard under the entire back edge of the dryer.

2. Firmly grasp the body of the dryer (not the top or console panel). Gently lay the dryer on the cardboard. See illustration.

3. Examine the leveling legs. Find the diamond marking.

Vent system chart NOTE: Performance of rear exhaust to either side of the dryer is

equivalent to adding one elbow. To determine maximum exhaust length, add one elbow to the chart.

Number of Type of Box or Angled

90° turns vent Louvered hoods or elbows hoods

0 Rigid metal 64 ft (20 m) 58 ft (17.7 m)

Flexible metal 36 ft (11 m) 28 ft (8.5 m)

1 Rigid metal 54 ft (16.5 m) 48 ft (14.6 m)

Flexible metal 31 ft (9.4 m) 23 ft (7 m)

2 Rigid metal 44 ft (13.4 m) 38 ft (11.6 m)

Flexible metal 27 ft (8.2 m) 19 ft (5.8 m)

3 Rigid metal 35 ft (10.7 m) 29 ft (8.8 m)

Flexible metal 25 ft (7.6 m) 17 ft (5.2 m)

4 Rigid metal 27 ft (8.2 m) 21 ft (6.4 m)

Flexible metal 23 ft (7 m) 15 ft (4.6 m)

Install exhaust hood. Use caulking compound to seal exterior wall opening around exhaust hood.

Connect vent to exhaust hood. Vent must fit inside exhaust hood. Secure vent to exhaust hood with 4" (10.2 cm) clamp.

Run vent to dryer location. Use the straightest path possible. See "Determine vent path" in "Plan Vent System." Avoid 90° turns. Use clamps to seal all joints. Do not use duct tape, screws or other fastening devices that extend into the interior

of the vent to secure vent.

4. Screw the legs into the leg holes by hand. Use a wrench to finish turning the legs until the diamond marking is no longer

visible.

5. Place a carton corner post from dryer packaging under each of the 2 dryer back corners. Stand the dryer up. Slide the dryer on the corner posts until it is close to its final location. Leave enough room to connect the exhaust vent or gas line.

For mobile home use Gas dryers must be securely fastened to the floor.

Mobile home installations require a Mobile Home Installation Kit. See "Tools and Parts" section for information on ordering.

R¸- / ......

Remove the red cap from the gas pipe.

Using a wrench to tighten, connect the gas supply to the dryer. Use pipe-joint compound on the threads of all non-

flared male fittings. If flexible metal tubing is used, be sure there are no kinks.

.... g

A ................

1. Using a 4" (10.2 cm) clamp, connect vent to exhaust outlet in dryer. If connecting to existing vent, make sure the vent is

clean. The dryer vent must fit over the dryer exhaust outlet and inside the exhaust hood. Check that the vent is secured

to exhaust hood with a 4" (10.2 cm) clamp.

2. Move dryer into its final location. Do not crush or kink vent.

3. (On gas models) Check that there are no kinks in the flexible gas line.

4. Once the exhaust vent connection is made, remove the corner posts and cardboard.

A.Flared male thread B.Non-flared male thread

NOTE: For LP gas connections, you must use pipe-joint compound resistant to the action of LP gas. Do not use

TEFLON®ttape. A combination of pipe fittings must be used to connect the

dryer to the existing gas line. Shown is a recommended connection. Your connection may be different, according to

the supply line type, size and location.

A. _" flexible gas connector B. _" dryer pipe

C. _" to _" pipe elbow D. _" pipe-to-flare adapter fitting

Open the shutoff valve in the supply line. The valve is open when the handle is parallel to the gas pipe.

Check the levelness of the dryer by first placing a level on the top of the dryer near the console.

Then, by placing a level in the crease on the side of the dryer

between the top of the dryer and the dryer cabinet, check the levelness from front to back.

If the dryer is not level, prop up the dryer using a wood block. Use a wrench to adjust the legs up or down and check again for

levelness.

A. Closed valve B. Open valve

Test all connections by brushing on an approved noncorrosive leak-detection solution. Bubbles will show

a leak. Correct any leak found.

t®TEFLON is a registered trademark of E.I. Du Pont De Nemours and Company.

You can change your door swing from a right-side opening to a left-side opening, if desired.

1. Place a towel or soft cloth on top of the dryer or work space to protect the surface.

Remove the door assembly

1. Open the dryer door.

2. Remove the bottom screw from each of the 2 hinges that attach the dryer door to the front panel of the dryer.

3. Loosen the top screw from each of the 2 hinges in Step 2.

A B

A, Loosen these screws. B. Remove these screws.

Reverse the strike

1. Remove the door strike from the dryer door opening.

2. Remove the cosmetic screw opposite the door strike.

A. Door strike B. Cosmetic screw

3. Reinstall the door strike and cosmetic screw on the opposite side of the dryer door opening from where they were

removed. NOTE: Door strike and plugs must be on the same side of the

dryer door opening.

Reinstall the door

Remove the 4 screws and 2 hinges from the dryer door.

Replace the 4 screws in the same holes.

4. Remove the dryer door and the hinges by lifting upward on the door. Lay the door on a flat, protected surface, with the inside of the door facing up. Remove remaining 2 loose screws from dryer front panel.

5. Remove the 4 plastic plugs located outside the dryer door opening.

Install 4 plastic plugs into screw holes in the dryer left where the hinges were removed in Step 4.

3. Remove the 4 screws from the opposite side of the door.

®_q[:--

4. Install the 2 hinges to the front panel of the dryer using 4 screws. Use the non-slotted side to attach the hinge to the front panel.

5. Install screws in the top hinge holes in the door. Do not tighten screws. Leave approximately 1¼,,(5 mm) of screw exposed.

A. Install these screws firsL

Hang door by placing screw heads into top slotted holes of hinges and slide door down. Align bottom screw holes in hinge and door. Install two bottom screws. Tighten all hinge

screws.

7. Close door to engage door strike.

1. Check that all parts are now installed. If there is an extra part, go back through the steps to see which step was skipped.

2. Check that you have all of your tools.

3. Dispose of/recycle all packaging materials.

4. Check the dryer's final location. Be sure the vent is not crushed or kinked.

5. Check that the dryer is level. See "Level Dryer."

Electrical Shock Hazard

Plug into a grounded 3 prong outlet. Do not remove ground prong. Do not use an adapter.

Do not use an extension cord. Failure to follow these instructions can result in death,

fire, or electrical shock.

Plug into a grounded 3 prong outlet. Turn on power.

Remove any protective film or tape remaining on the dryer. NOTE: Glass door models have a protective film on the

window that should be removed.

8. Read "Dryer Use."

9. Wipe the dryer drum interior thoroughly with a damp cloth to remove any dust.

10. Test dryer operation by selecting a Timed Dry heated cycle and starting the dryer. For this test, do not select the Air Only

modifier. If the dryer will not start, check the following:

• Dryer is plugged into a grounded 3 prong outlet.

• Electrical supply is connected.

• Household fuse is intact and tight, or circuit breaker has

not tripped.

• Dryer door is closed.

11. When the dryer has been running for 5 minutes, open the dryer door and feel for heat. If you feel heat, cancel cycle and close door. If you do not feel heat, turn off the dryer and check that the gas supply line shutoff valve is open.

• If the gas supply line shutoff valve is closed, open it, then

repeat the 5-minute test as outlined above.

• If the gas supply line shutoff valve is open, contact a

qualified technician.

DRYERUSE

f Cool w_nkle \

"_ NN\

/ More edium Di_UMLIGHT \\

// _ormal _w '\

slANt \

/" DRY QUICK T H ,

/ DRY

TIMEC OUUpC

9RYN[SS T[MP 9AMP ONY ENDOF CYCLE

Explosion Hazard

Keep flammable materials and vapors, such as gasoline, away from dryer.

Do not dry anything that has ever had anything

flammable on it (even after washing).

Failure to follow these instructions can result in death,

explosion, or fire.

No washer can completely remove oil.

Do not dry anything that has ever had any type of oil on it (including cooking oils).

Items containing foam, rubber, or plastic must be dried

on a clothesline or by using an Air Cycle.

Failure to follow these instructions can result in death

SIGNAL SIGNAL

Fire Hazard

or fire.

This manual covers several different models. Your dryer may not • have all of the cycles and features described.

Follow these basic steps to start your dryer. Please refer to specific sections of this manual for more detailed information.

1. Clean lint screen before each load. See "Cleaning the Lint Screen."

2. Place laundry into dryer and shut door.

3. Press POWER.

4. Turn the knob to the selected cycle. The preset settings for Automatic Cycles or Timed Cycles will illuminate. The • estimated (automatic cycle) or actual (timed) cycle time (in minutes) will show in the display.

NOTE: A default time is displayed when an automatic cycle is selected. During the first few minutes of the drying process, the cycle time may automatically vary from the default time based on the size and fabric type of the load. Toward the end of the drying process, the estimated time display will adjust again, showing the final drying time.

To use an Automatic Cycle

• Press POWER.

• Turn the knob to desired Automatic Cycle.

Select DRYNESS to adjust how dry you want the load. As the cycle runs, the control senses the dryness of the load and adjusts the time automatically for the selected dryness level.

The default dryness setting is Normal when an Automatic Cycle is selected. You can select a different dryness level, depending on your load, by pressing Dryness and choosing More, Less or Damp. Selecting More, Less or Damp automatically adjusts the sensed time needed. Once a dryness level is set, it cannot be changed without stopping the cycle.

Select the desired Options.

To make changes during an Automatic Cycle:

• Press PAUSE/CANCEL.

• Adjust Dryness.

DRYNESS

NOTE: Dryness selections can be made only while using Automatic Cycles.

How the AccelerCare TM Drying System Works

Moisture-sensing strips inside the dryer drum and temperature sensors in the airstream monitor how fast the load is drying, how hot the air should be and when clothes are dry. The system automatically stops the cycle to help save time and avoid overdrying.

To use a Timed Cycle

• Turn knob to desired Timed Cycle.

• Press the TIME ADJUST up or down arrows until the

desired drying time is displayed. Press the up or down arrows and the time will change by 1-minute intervals. Press and hold the up or down arrows and the time will change by 5-minute intervals.

NOTE: The Time Adjust features can be used only with Timed Cycles.

TIMEADJUST

• Press TEMP until the desired temperature illuminates.

TEMP

NOTE: The Temp feature can be used only with Timed Cycles.

NOTE: During a Timed Cycle, you can change the settings for Time, Temp, WRINKLE SHIELD TM and the End of Cycle Signal.

(OPTIONAL STEP) If desired, select OPTIONS. For more details, see "Options."

(OPTIONAL STEP) If desired, press END OF CYCLE SIGNAL. A signal will sound to alert you when a cycle ends. For more details, see "End of Cycle Signal."

Press START. Be sure the door is closed.

• If you do not press Start within 5 minutes of selecting the

cycle, the dryer automatically shuts off.

• If you wish to end your drying cycle after pressing Start,

press PAUSE/CANCEL twice.

Select the correct cycle and dryness level or temperature for your load. If an Automatic Cycle is running, the display shows the estimated cycle time when your dryer is automatically sensing the dryness level of your load. If a Timed Cycle is running, the display shows the exact number of minutes remaining in the cycle.

Cool Down tumbles the load without heat during the last few minutes of all cycles. Cool Down makes the loads easier to handle and reduces wrinkling. The length of the Cool Down depends on the load size and dryness level.

Drying tips

• Follow care label directions when they are available.

• If desired, add a fabric softener sheet. Follow package instructions.

• To reduce wrinkling, remove the load from the dryer as soon as tumbling stops. This is especially important for permanent press, knits and synthetic fabrics.

• Avoid drying heavy work clothes together with lighter fabrics. This could cause overdrying of lighter fabrics and lead to increased shrinkage or wrinkling.

Cycle tips

• Dry most loads using the preset cycle settings.

• Refer to the Automatic or Timed Preset Cycle Settings chart (in the "Cycles" section) for a guide to drying various loads.

Drying temperature and dryness level are preset when you choose an Automatic Cycle. You can select a different dryness level, depending on your load, by pressing Dryness and choosing More, Normal, Less or Damp.

NOTE: You cannot use the Time Adjust and you cannot choose a Temperature with the Automatic Cycles.

If you wish to adjust the cycle length of a Timed Cycle, press the Time Adjust up or down arrows. Adjust the temperature of a Timed Cycle by pressing Temp until the desired temperature is selected.

NOTE: You cannot choose a dryness level with Timed Cycles.

Follow the progress of your dryer with the drying Status indicator lights.

Cool Wrinkle

To stop or pause your dryer at any time Open the door or press PAUSE/CANCEL once. Press PAUSE/

CANCEL twice to cancel a cycle. To restart the dryer

Close the door. Press START until dryer starts. NOTE: Drying will continue from where the cycle was interrupted

if you close the door and press Start within 5 minutes. If the cycle is interrupted for more than 5 minutes, the dryer will shut off. Select new cycle settings before restarting the dryer.

Sensing

• In an Automatic Cycle, the Sensing light illuminates until a wet item is detected.

• In a Timed Cycle, the Sensing light illuminates at the beginning of a cycle and turns off 5 minutes into the cycle.

Wet

The Wet light illuminates at the beginning of an Automatic Cycle if

a wet item is detected.

• In an Automatic Cycle, if a wet item is not detected after approximately 5 minutes, the dryer goes directly into Cool

Down and the Cool Down and the WRINKLE SHIELD TM setting indicators illuminate, if selected.

• In a Timed Cycle, wet items are not detected. The dryer will continue to run for the length of time selected, and the Wet light will illuminate. The damp light will not illuminate.

Damp The Damp light illuminates in an Automatic Cycle when the

laundry is approximately 80% dry. Damp Dry Signal beeps, if selected. See "Options."

Cool Down

The Cool Down light illuminates during the cool down part of the cycle. Laundry cools for ease in handling.

Done

The Done light illuminates when the drying cycle is finished. This indicator stays on during the WRINKLE SHIELD TM setting.

WRINKLE SHIELD TM Setting

The WRINKLE SHIELD TM setting light illuminates when this option is selected. This indicator stays on during the WRINKLE SHIELD TM setting.

Indicator lights

Other indicator lights show Cycle, Modifiers, Options and Cycle Signal settings selected. The display shows the estimated or actual time remaining.

Select the drying cycle that matches the type of load you are drying. See Automatic or Timed Preset Cycle Settings charts.

HEAVYDUTY CASUAL

DELICATE

Automatic Preset Cycle Settings

Automatic Cycles Temperature

Load Type HEAVY DUTY High

Heavyweight mixed loads, cottons,

jeans

NORMAL Medium Corduroys, work clothes

CASUAL Low

Business casual clothes, permanent press, synthetics

DELICATE Extra-Low Lingerie, blouses, washable knit

fabrics

Timed Cycles

Use Timed Cycles to select a specific amount of drying time and a drying temperature. When a Timed Cycle is selected, the Estimated Time Remaining display shows the actual time remaining in your cycle. You can change the actual time in the cycle by pressing the Time Adjust up or down arrows. See "Changing Cycles, Modifiers and Options."

NOTE: Timed Cycles may also be used with the dryer rack. See "Dryer Rack."

TIMED QUICK TOuUCH

DRY DRY

Automatic Cycles

Automatic Cycles allow you to match the cycle to the load you are drying. See the following Automatic Preset Cycle Settings chart. Each cycle dries certain fabrics at the recommended temperature. A sensor detects the moisture in the load and automatically adjusts the drying time for optimal drying.

Heavy Duty

Use this cycle to get high heat for heavyweight mixed loads, cottons and jeans.

Normal

Use this cycle to get medium heat for drying sturdy fabrics such as work clothes.

Casual

Use this cycle to get low heat for drying no-iron fabrics, such as sport shirts, casual business clothes and permanent press

blends.

Timed Dry

Use this cycle to complete drying if items are still damp after an

Automatic Cycle. Timed Dry is also useful for drying heavyweight

and bulky items, such as bedspreads and work clothes. Lightweight garments, such as exercise wear, can be dried using

Timed Dry on a low temperature setting.

QUICK DRY

Use this cycle for drying small loads or loads that need a short drying time.

Touch Up

Use this cycle to help smooth out wrinkles from such items as clothes packed in a suitcase or items wrinkled from being left in the dryer too long.

Timed Preset Cycle Settings

Timed Cycles Default Default Time

Load Type Temperature (Minutes)

TIMED DRY High 40

Heavyweight, bulky items, work clothes

QUICK DRY Medium 24 Small loads

TOUCH UP Medium 20

Helps to smooth out wrinkles

Delicate

Use this cycle to get extra-low heat to gently dry items such as lingerie, blouses or washable knit fabrics.

Automatic Cycle Modifiers

You can customize your cycles by selecting options.

Use the Dryness Modifier to select dryness levels for the Auto Dry Cycles. Press DRYNESS until the desired Dryness setting

illuminates. The preset dryness setting is Normal when an Automatic Cycle is

selected. You can select a different dryness level, depending on your load, by pressing Dryness and choosing More, Normal, Less or Damp. Selecting More, Normal, Less or Damp automatically adjusts the dryness level at which the dryer will shut off. Once a dryness level is set, it cannot be changed without stopping the cycle.

DRYNESS

NOTE: Dryness Level selections cannot be used with the Timed Cycles.

Timed Cycle Modifiers

Use the Temperature Modifier to select temperatures for the Timed Cycles. Press TEMP until the desired temperature setting

illuminates.

TEMP

NOTE: Temperature modifiers cannot be used with the Auto Dry Cycles.

Air Only Use the Air Only Modifier for items that require drying without

heat such as rubber, plastic and heat-sensitive fabrics. This table shows examples of items that can be dried using Air Only.

Type of Load Time*

(Minutes)

Foam rubber - pillows, padded bras, stuffed toys 20 - 30 Plastic - Shower curtains, tablecloths 20 - 30 Rubber-backed rugs Olefin, polypropylene, sheer nylon

40 - 50 10 -20

*Reset cycle to complete drying, if needed.

When using Air Only

• Check that coverings are securely stitched.

• Shake and fluff pillows by hand periodically during the cycle.

• Dry item completely. Foam rubber pillows are slow to dry. NOTE: Air Only is not available with Automatic Cycles.

DRUMLIGHT

WRINKLESHIELD

((,_,))

DAMPDRY

SIGNAL

OPTIONS

Drum Light

On some models, select Drum Light to turn on the light inside the dryer drum. During a cycle, if Drum Light is selected, the drum light turns on and will remain on until DRUM LIGHT is pressed again, the door is opened and closed, or the door is left open for

5 minutes. When the dryer is not running, the drum light will turn on when

DRUM LIGHT is pressed or the dryer door is opened, and it will remain on until the dryer door has been open for 5 minutes, the dryer door is closed or DRUM LIGHT is pressed again.

Press DRUM LIGHT at any time to turn the drum light ON or OFF.

WRINKLE SHIELD TM Setting The WRINKLE SHIELD TM setting helps keep wrinkles from

forming when you cannot unload the dryer promptly at the end of a cycle. During this option, the dryer stops tumbling and then tumbles again for a brief period.

• Press the WRINKLE SHIELD TM setting to get up to 120 minutes of heat-free, periodic tumbling at the end of a cycle.

• Stop the WRINKLE SHIELD TM setting at any time by pressing WRINKLE SHIELD TM setting or opening the dryer door.

• For the Perm Press/Casual Cycle, the WRINKLE SHIELD TM setting is preset to ON. The other Automatic Cycles will retain the WRINKLE SHIELD TM setting. For example, if you select the WRINKLE SHIELD TM setting in the Normal cycle, the WRINKLE SHIELD TM setting will be on the next time you select the Normal cycle.

NOTE: If you do not select the WRINKLE SHIELD TM setting, the dryer stops after cool down.

Damp Dry Signal

Select the Damp Dry Signal to alert you that your clothes are approximately 80% dry. This is useful when you want to remove lightweight items in a mixed load to avoid overdrying or remove partially dry items that may need ironing.

The Damp Dry Signal is useful when drying bedsheets/linens in a

mixed load. When the signal goes off, open the door to stop the dryer, rearrange the load inside the dryer, close the door and restart the dryer to finish the drying cycle. Rearranging the load will aid in the drying process.

NOTE: The Damp Dry Signal is available only with the Automatic Cycles.

End of Cycle Signal

The End of Cycle Signal produces an audible sound when the drying cycle is finished. Promptly removing clothes at the end of the cycle reduces wrinkling.

Press END OF CYCLE SIGNAL until the desired volume (Loud, Soft or Off) is selected.

ENDOFCYCLE

SIGNAL

NOTE: When the WRINKLE SHIELD TM setting is selected and the End of Cycle Signal is on, a tone sounds every 5 minutes until the clothes are removed, or the WRINKLE SHIELD TM setting ends.

You can change Automatic and Timed Cycles, Modifiers and Options anytime before pressing Start.

• Three short tones sound if an unavailable combination is selected. The last selection will not be accepted.

Changing Cycles after pressing Start

1. Press PAUSE/CANCEL twice.

2. Select the desired cycle and options.

3. Press START. The dryer starts at the beginning of the new cycle.

NOTE: If you do not press Start within 5 minutes of selecting the cycle, the dryer automatically shuts off.

Changing Modifiers and Options after pressing Start

You can change an Option or Modifier anytime before the selected Option or Modifier begins.

1. Press PAUSE/CANCEL once.

2. Select the new Option and/or Modifiers.

3. Press START to continue the cycle.

NOTE: If you happen to press PAUSE/CANCEL twice, the program clears and your dryer shuts down. Restart the selection

process.

3. To select a new drying setting, press the DRYNESS button again until the desired drying setting is shown. NOTE: While cycling through the settings, the current setting will not flash, but the other settings will flash.

4. Press START to save the drying setting.

5. The drying setting you selected will become your new preset drying setting for all Auto Dry cycles.

Use the Drying Rack to dry items such as sweaters and pillows without tumbling. The drum turns, but the drying rack does not

move. If your model does not have a drying rack, you may be able to

purchase one for your model. To find out whether your model allows drying rack usage and for information on ordering, please refer to the front page of the manual or contact the dealer from whom you purchased your dryer.

NOTE: The drying rack must be removed for normal tumbling. Do not use the automatic cycle with the drying rack.

To use the drying rack

1. Open dryer door.

A. Front edge

Place drying rack inside dryer drum, positioning the back wire on the ledge of the inner dryer back panel. Push down on front edge of drying rack to secure at the front of the dryer.

Changing the Preset Dryness Level Settings

If all of your loads on all Auto Dry cycles are consistently not as dry as you would like, you may change the preset Dryness Level settings to increase the dryness. This change will affect all of your Auto Dry cycles.

Your Dryness Level settings can be adjusted to adapt to different installations, environmental conditions or personal preference.

There are 3 drying settings: 1 (factory preset dryness level), 2 (slightly dryer clothes, approximately 15% more drying time)

and 3 (much dryer clothes, approximately 30% more drying time).

1. The Dryness Level settings cannot be changed while the dryer is running.

2. Press and hold the DRYNESS button for 5 seconds. The dryer will beep, and "CF" will be displayed for 1 second

followed by the current drying setting.

A. Dryer rack front edge

B. Dryer back panel

3. Put the wet items on top of the drying rack. Leave space between the items so air can reach all the surfaces.

NOTE: Do not allow items to hang over the edge of the drying rack.

4. Close the door.

5. Press the POWER button.

6. Select a timed drying cycle and temperature (see following chart). Items containing foam, rubber or plastic must be dried on a clothesline or by using the Air Only temperature setting.

7. You must select a time by pressing TIME ADJUST Up or Down. Reset time as needed to complete drying. Refer to the following table.

8. Press (and hold) START button (about 1 second).

This chart shows examples of items that can be rack dried and the suggested cycle, temperature setting and drying time. Actual drying time will depend on the amount of moisture items hold.

DRYERCARE

Rack Dry Setting Temp. Time*

Wool Sweaters Timed Low 60

Block to shape and lay flat on Dry

the drying rack. Stuffed toys or pillows Timed Low 60

Cotton or polyester fiber filled Dry Stuffed toys or pillows Timed Air Only 90

Foam rubber filled Dry (no heat)

Sneakers or canvas shoes Timed Air Only 90

Dry (no heat)

*(Minutes) Reset time to complete drying, if needed.

2. Push the lint screen firmly back into place.

Keep dryer area clear and free from items that would obstruct the flow of combustion and ventilation air.

Explosion Hazard

Keep flammable materials and vapors, such as gasoline, away from dryer.

Place dryer at least 18 inches (46 cm) above the floor

for a garage installation.

Failure to do so can result in death, explosion, or fire.

(;IJ_lil_llI__ Ii,I (:_III]

Clean the lint screen before each load. A screen blocked by lint can increase drying time.

IMPORTANT:

• Do not run the dryer with the lint screen loose, damaged, blocked or missing. Doing so can cause overheating and damage to both the dryer and fabrics.

• If lint falls off the screen into the dryer during removal, check the exhaust hood and remove the lint.

Every load cleaning

1. The lint screen is located on the top of the dryer. Pull the lint screen toward you. Roll lint off the screen with your fingers.

Do not rinse or wash screen to remove lint. Wet lint is hard to remove.

I.l/<i I _>=_i I Jl

As needed cleaning

1. Roll lint off screen with your fingers.

2. Wet both sides of lint screen with hot water.

3. Wet a nylon brush with hot water and liquid detergent. Scrub lint screen with the brush to remove residue buildup.

4. Rinse screen with hot water.

5. Thoroughly dry lint screen with a clean towel. Insert lint screen back into dryer.

l. lelllllll= _ I .... " = °,

1. Apply a liquid, nonflammable household cleaner to the stained area of the drum and rub with a soft cloth until stain is

removed.

2. Wipe drum thoroughly with a damp cloth.

3. Tumble a load of clean cloths or towels to dry the drum.

NOTE: Garments that contain unstable dyes, such as denim blue

jeans or brightly colored cotton items, may discolor the dryer

interior. These stains are not harmful to your dryer and will not stain future loads of clothes. Dry unstable dye items inside out to avoid transfer of dye.

From Inside the Dryer Cabinet

Lint should be removed every 2 years, or more often, depending on dryer usage. Cleaning should be done by a qualified person.

From the Exhaust Vent

Lint should be removed every 2 years, or more often, depending on dryer usage.

Vacation care

The dryer light automatically turns on inside the dryer drum when you open the door.

Operate your dryer only when you are at home. If you will be on vacation or not using your dryer for an extended period of time, you should:

1. Unplug dryer or disconnect power.

2. Close shutoff valve in gas supply line.

3. Clean lint screen. See "Cleaning the Lint Screen."

Moving care

1. Unplug the power supply cord.

2. Close shutoff valve in gas supply line.

3. Disconnect gas supply line pipe and remove fittings attached to dryer pipe.

4. Cap the open fuel supply line.

5. Make sure leveling legs are secure in dryer base.

6. Use masking tape to secure dryer door.

To change the drum light

1. Unplug dryer or disconnect power.

2. Open the dryer door. Locate the light bulb cover on the back wall of the dryer. Remove the screw located in the lower right

corner of the cover. Remove the cover.

3. Turn bulb counterclockwise. Replace the bulb with a lO-watt appliance bulb only. Replace the cover and secure with the

screw.

4. Plug in dryer or reconnect power.

TROUBLESHOOTING

Firsttry the solutions suggested here or visit our website and reference FAQs (Frequently Asked Questions) to possibly

In U.S.A. www.whirlpool.com/help - In Canada www.whirlpool.ca

avoid the cost of a service call...

Dryer will not run

• Has a household fuse blown, or circuit breaker tripped? Replace the fuse or reset the circuit breaker. If the problem continues, call an electrician.

• Was a regular fuse used? Use a time-delay fuse.

• Is the dryer door firmly closed?

• Was the Start button firmly pressed? Large loads may require pressing and holding the Start

button for 2-5 seconds.

No heat

• Has a household fuse blown, or has a circuit breaker tripped?

The drum may be turning, but you may not have heat. Replace the fuse or reset the circuit breaker. If the problem continues, call an electrician.

• Is the valve open on the gas supply line?

Unusual sounds

• Has the dryer had a period of non-use? If the dryer hasn't been used for a while, there may be a thumping sound during the first few minutes of operation.

• Is a coin, button or paper clip caught between the drum and front or rear of the dryer? Check the front and rear edges of the drum for small objects. Clean out pockets before laundering.

• Is it a gas dryer? The gas valve clicking is a normal operating sound.

• Are the four legs installed, and is the dryer level front to back and side to side?

The dryer may vibrate if not properly installed. See the Installation Instructions.

Is the clothing knotted or balled up?

When balled up, the load will bounce, causing the dryer to vibrate. Separate the load items and restart the dryer.

Dryer displaying code message

• "PF" (power failure), check the following: Was the drying cycle interrupted by a power failure? Press and hold START to restart the dryer.

• "F" Variable (F1, F2, F20, etc.) service codes: Call for service.

Clothes are not drying satisfactorily, drying times are too long, or load is too hot

• Is the lint screen clogged with lint? Lint screen should be cleaned before each load.

Fire Hazard

Use a heavy metal vent. Do not use a plastic vent.

Do not use a metal foil vent. Failure to follow these instructions can result in death

or fire.

Is the exhaust vent or outside exhaust hood clogged with lint, restricting air movement?

Run the dryer for 5-10 minutes. Hold your hand under the outside exhaust hood to check air movement. If you do not feel air movement, clean exhaust system of lint or replace exhaust vent with heavy metal or flexible metal vent. See the

Installation Instructions.

Are fabric softener sheets blocking the grille?

Use only one fabric softener sheet, and use it only once. Is the exhaust vent the correct length?

Check that the exhaust vent is not too long or has too many turns. Long venting will increase drying times. See the

Installation Instructions.

Is the exhaust vent diameter the correct size?

Use 4" (10.2 cm) diameter vent material.

• Is the dryer located in a closet? Closet doors must have ventilation openings at the top and bottom of the door. The rear of the dryer requires 5" (12.7 cm) of airspace, and the sides and front of the dryer require a minimum of 1" (2.5 cm). See the Installation Instructions.

• Has the Air Only modifier been selected? Select the right temperature for the types of garments being

dried. See "Modifiers."

• Is the load too large and heavy to dry quickly? Separate the load to tumble freely.

Cycle time too short

Excessive Weight Hazard

Use two or more people to move and install dryer. Failure to do so can result in back or other injury.

• Is the automatic cycle ending early? The load may not be contacting the sensor strips. Level the dryer.

Change the dryness level setting on Automatic Cycles. Increasing or decreasing the dryness level will change the amount of drying time in a cycle.

Lint on load

• Is the lint screen clogged? Clean lint screen. Check for air movement.

Stains on load or drum

• Was dryer fabric softener properly used? Add dryer fabric softener sheets at the beginning of the cycle. Fabric softener sheets added to a partially dried load can stain your garments.

Drum stains are caused by dyes in clothing (usually blue jeans). This will not transfer to other clothing.

Explosion Hazard

Keep flammable materials and vapors, such as

gasoline, away from dryer. Place dryer at least 18 inches (46 crn) above the floor

for a garage installation.

Failure to do so can result in death, explosion, or fire.

Is the dryer located in a room with temperature below 45°F (7°C)?

Proper operation of dryer cycles requires temperatures above 45°F (7°C).

Loads are wrinkled

• Was the load removed from dryer at the end of the cycle?

• Was the dryer overloaded? Dry smaller loads that can tumble freely.

Odors

Have you recently been painting, staining or varnishing in the area where your dryer is located?

If so, ventilate the area. When the odors or fumes are gone from the area, rewash and dry the clothing.

ASSISTANCEORSERVICE

Before calling for assistance or service, please check "Troubleshooting." It may save you the cost of a service call. If you still need help, follow the instructions below.

When calling, please know the purchase date and the complete model and serial number of your appliance. This information will help us to better respond to your request.

If you need replacement parts

If you need to order replacement parts, we recommend that you only use FSP®factory specified parts. These parts will fit right and work right because they are made with the same precision used to build every new WHIRLPOOL ®appliance.

To locate FSP®replacement parts in your area: In the U.S.A., call the Customer eXperience Center at

1-800-253-1301, or your nearest designated service center. In Canada, call 1-800-807-6777, or your nearest designated

service center.

Call the Whirlpool Customer eXperience Center toll free: 1-800-253-1301 or visit us at www.whirlpool.com.

Our consultants provide assistance with:

Features and specifications on our full line of appliances. Installation information.

Use and maintenance procedures. Accessory and repair parts sales. Specialized customer assistance (Spanish speaking, hearing

impaired, limited vision, etc.). Referrals to local dealers, repair parts distributors, and

service companies. Whirlpool designated service technicians are trained to fulfill the product warranty and provide after- warranty service, anywhere in the United States.

To locate the Whirlpool designated service company inyour area, you can also look in your telephone directory Yellow Pages.

For further assistance

If you need further assistance, you can write to Whirlpool Corporation with any questions or concerns at:

Whirlpool Brand Home Appliances Customer eXperience Center

553 Benson Road Benton Harbor, MI 49022-2692

Please include a daytime phone number in your correspondence.

Call the Whirlpool Canada LP Customer Interaction Centre toll free: 1-800-807-6777 or visit us at www.whirlpool.ca.

Our consultants provide assistance with:

• Use and maintenance procedures

• Accessory and repair parts sales

• Features and specifications on our full line of appliances

• Referrals to local dealers, repair parts distributors, and service companies. Whirlpool Canada LP designated service technicians are trained to fulfill the product warranty and provide after-warranty service anywhere in Canada.

For further assistance If you need further assistance, you can write to Whirlpool Canada

LP with any questions or concerns at:

Customer Interaction Centre Whirlpool Canada LP

1901 Minnesota Court Mississauga, Ontario L5N 3A7

Please include a daytime phone number in your correspondence.

ACCESSORIES

Enhance your dryer with these premium accessories. For more high-quality items or to order, call 1-800-901-2042, or

visit us at www.whirlpool.com/accessories. In Canada,call 1-800-807-6777, or visit us at www.whirlpoolparts.ca.

Part Accessory Number

20-48KITRC 4 ft (1.2 m) gas line dryer connector

PT220L PT400L

PT600L

4210463 31682

1903WH

49572 W10071550A

installation kit 4 ft (1.2 m) dryer cord, 3-wire, 30 amp

4 ft (1.2 m) dryer cord, 4-wire, 30 amp 6 ft (1.8 m) dryer cord, 4-wire, 30 amp Dryer vent lint brush

All-purpose appliance cleaner

Laundry supply storage cart LP gas conversion kit Dryer Rack

Accessories U.S.A.

To order accessories, call the Whirlpool Customer eXperience Center toll free at 1-800-442-9991 and follow the menu prompts. Or visit our website at www.whirlpool.com.

WHIRLPOOLCORPORATIONMAJORAPPLIANCEWARRANTY

ONE YEAR LIMITED WARRANTY

For one year from the date of purchase, when this major appliance is operated and maintained according to instructions attached to or furnished with the product, Whirlpool Corporation or Whirlpool Canada LP (hereafter "Whirlpool") will pay for Factory Specified Parts and repair labor to correct defects in materials or workmanship. Service must be provided by a Whirlpool designated service company. This limited warranty applies only when the major appliance is used in the country in which it was purchased.

ITEMS WHIRLPOOL WILL NOT PAY FOR

1. Service calls to correct the installation of your major appliance, to instruct you how to use your major appliance, to replace or repair house fuses or to correct house wiring or plumbing.

2. Service calls to repair or replace appliance light bulbs, air filters or water filters. Those consumable parts are excluded from warranty coverage.

3. Repairs when your major appliance is used for other than normal, single-family household use.

4. Damage resulting from accident, alteration, misuse, abuse, fire, flood, acts of God, improper installation, installation not in accordance with electrical or plumbing codes, or use of products not approved by Whirlpool.

5. Any food loss due to refrigerator or freezer product failures.

6. Replacement parts or repair labor costs for units operated outside the United States or Canada.

7. Pickup and delivery. This major appliance is designed to be repaired in the home.

8. Repairs to parts or systems resulting from unauthorized modifications made to the appliance.

9. Expenses for travel and transportation for product service in remote locations.

10. The removal and reinstallation of your appliance if it is installed in an inaccessible location or is not installed in accordance with published installation instructions.

11. Replacement parts or repair labor costs when the major appliance is used in a country other than the country in which it was purchased.

DISCLAIMER OF IMPLIED WARRANTIES; LIMITATION OF REMEDIES

CUSTOMER'S SOLE AND EXCLUSIVE REMEDY UNDER THIS LIMITED WARRANTY SHALL BE PRODUCT REPAIR AS PROVIDED HEREIN. IMPLIED WARRANTIES, INCLUDING WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE,

ARE LIMITED TO ONE YEAR OR THE SHORTEST PERIOD ALLOWED BY LAW. WHIRLPOOL SHALL NOT BE LIABLE FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES. SOME STATES AND PROVINCES DO NOT ALLOW THE EXCLUSION OR LIMITATION

OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, OR LIMITATIONS ON THE DURATION OF IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS, SO THESE EXCLUSIONS OR LIMITATIONS MAY NOT APPLY TO YOU. THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS AND YOU MAY ALSO HAVE OTHER RIGHTS, WHICH VARY FROM STATE TO STATE OR PROVINCE TO PROVINCE.

Outside the 50 United States and Canada, this warranty does not apply. Contact your authorized Whirlpool dealer to determine if another warranty applies.

If you need service, first see the "Troubleshooting" section of the Use & Care Guide. After checking "Troubleshooting," additional help can be found by checking the "Assistance or Service" section or by calling Whirlpool. In the U.S.A., call 1-800-253-1301. In Canada,

call 1-800-807-6777. 12/05

Keep this book and your sales slip together for future reference. You must provide proof of purchase or installation date for in-warranty service.

Write down the following information about your major appliance to better help you obtain assistance or service if you ever need it. You will need to know your complete model number and serial

number. You can find this information on the model and serial number label located on the product.

Dealer name

Address

Phone number

Model number

Serial number

Purchase date

# # #

SECURITEDELASECHEUSE

Votre securite et celle des autres est tres importante.

Nous donnons de nombreux messages de s_curit_ importants dans ce manuel et sur votre appareil m_nager. Assurez-vous de toujours lire tousles messages de s_curit_ et de vous y conformer.

Ce symbole d'alerte de s_curit_ vous signale les dangers potentiels de d_c_s et de blessures graves & vous et & d'autres.

Voici le symbole d'alerte de s_curit&

Tousles messages de s_curit_ suivront le symbole d'alerte de s_curit_ et le mot "DANGER" ou

"AVERTISSEMENT". Ces mots signifient •

Risque possible de d_cbs ou de blessure grave si vous ne suivez pas imm_diatement les instructions.

Risque possible de d_cbs ou de blessure grave si vous ne suivez pas les instructions.

Tousles messages de s_curit_ vous diront quel est le danger potentiel et vous disent comment r_duire le risque de blessure et ce qui peut se produire en cas de non-respect des instructions.

AVERTISSEMENT • Pour votre securite, les renseignements dans ce manuel doivent etre observes pour reduire au minimum les risques d'incendie ou d'explosion ou pour eviter des dommages au produit, des blessures ou un deces.

- Ne pas entreposer ou utiliser de ressence ou d'autres vapeurs ou liquides

inflammables a proximite de cet appareil ou de tout autre appareil electromenager.

-QUE FAIRE DANS LE CAS D'UNE ODEUR DE GAZ :

• Ne pas tenter d'allumer un appareil.

• Ne pas toucher a un commutateur electrique; ne pas utiliser le telephone se trouvant

sur les lieux.

• I_vacuer tous les gens de la piece, de I'edifice ou du quartier.

• Appeler immediatement le fournisseur de gaz d'un telephone voisin. Suivre ses

instructions.

• .&.defaut de joindre votre fournisseur de gaz, appeler les pompiers.

- L'installation et rentretien doivent etre effectues par un installateur qualifie, une agence de service ou le fournisseur de gaz.

IMPORTANTES INSTRUCTIONS DE SECURJTE

AMERT_SSE_V_ ENT • Pour reduire le risque d'incendie, de choc electrique ou de blessure Iors de I'utilisation de la secheuse, il convient d'observer certaines precautions el6mentaires dont les suivantes :

[] Lire toutes les instructions avant d'utiliser la secheuse. [] Ne pas placer des articles exposes aux huiles de cuisson

dans votre secheuse. Les articles contamines par des huiles de cuisson peuvent contribuer &une reaction

chimique qui pourrait causer & la charge de s'enflammer.

[] Ne pas faire secher dans la machine des articles qui ont

deja et6 nettoyes, laves, imbibes, ou taches d'essence, de solvants pour nettoyage & sec, d'autres substances

inflammables, ou de substances explosives puisqu'elles

degagent des vapeurs qui peuvent provoquer un

incendie ou une explosion.

[] Ne pas permettre & des enfants de jouer sur ou &

I'interieur de la secheuse. Une surveillance etroite est

necessaire Iorsque la secheuse est utilisee pres d'eux.

[] Avant d'enlever la secheuse du service ou la jeter, enlever

la porte du compartiment de sechage.

[] Ne pas mettre la main dans la secheuse si le tambour est

en mouvement.

[] Ne pas installer ni entreposer la secheuse ou elle sera

exposee aux intemperies.

[] Ne pas jouer avec les commandes.

[] Ne pas reparer ni remplacer une piece de la secheuse ou

essayer d'en faire I'entretien & moins d'une recommandation specifique dans le guide d'utlilisation et d'entretien, ou

publiee dans les instructions de reparation par I'utilisateur que vous comprenez et pouvez executer avec competence.

[] Ne pas utiliser un produit assouplissant de tissu ou des

produits pour eliminer la statique & moins qu'ils ne soient recommandes par le fabricant du produit assouplissant de

tissu ou du produit.

[] Ne pas utiliser la chaleur pour faire secher des articles

fabriques avec du caoutchouc mousse ou des materiaux semblables.

[] Nettoyer le filtre & charpie avant et apr_s chaque charge. [] Ne pas laisser la charpie, la poussiere, ou la salete

s'accumuler autour du systeme d'evacuation ou autour de I'appareil.

[] Un nettoyage periodique de I'interieur de la secheuse et du

conduit d'evacuation doit _tre effectue par une personne qualifiee.

[] Voir les instructions d'installation pour les exigences de

liaison de I'appareil &la terre.

CONSERVEZ CES INSTRUCTIONS

IMPORTANT : L'installation du gaz dolt se conformer aux codes Iocaux, ou en I'absence de codes Iocaux, au code canadien

d'installation B149.1 du gaz naturel ou du propane.

La secheuse dolt _tre electriquement reliee & la terre conformement aux codes Iocaux, ou en I'absence de codes Iocaux, au Code

canadien de I'electricit6, CSA C22.1.

INSTRUCTIONSD'INSTALLATION

.... ?6ces

Rassembler les outils et pieces necessaires avant de commencer I'installation. Lire et suivre les instructions fournies avec les outils

indiques ici.

• Cle a tuyau de 8" ou 10" •

• Cle& molette de 8" ou 10" • (pour le raccordement au

gaz) •

• Tournevis a lame plate

• Cle &molette avec • ouverture jusqu'&

1" (2,5 cm) ou cle & douille hexagonale (pour ajuster les pieds de la secheuse)

• Niveau •

• Tourne-ecrou ou cle douille de 1¼,,

Couteau Clapets d'evacuation

Compose d'etancheite des tuyauteries resistant au gaz de petrole liquefi6

Pistolet & calfeutrage et compose de calfeutrage (pour I'installation d'un

nouveau circuit d'evacuation)

Pince

Risque d'explosion

Garder les matieres et les vapeurs inflammables, telle que I'essence, loin de la s6cheuse.

Placer la s6cheuse au moins 46 cm (18 po) au=dessus

du plancher pour une installation darts un garage.

Le non=respect de ces instructions peut causer un d6ces, une explosion ou un incendie.

Pi_ces fournies :

Retirer le sachet de pieces du tambour de la secheuse. Verifier que toutes les pieces de la liste sont presentes.

4pieds de nivellement

Pi_ces necessaires :

Consulter les codes Iocaux et le fournisseur de gaz, verifier I'alimentation en gaz existante, I'alimentation electrique et le circuit d'evacuation, et lire les sections "Specifications electriques", "Alimentation en gaz" et "Exigences concernant I'evacuation" avant d'acheter les pieces necessaires.

Les installations pour maison mobile necessitent des pieces particulieres (voir liste ci-dessous) qui peuvent 6tre commandees en appelant le marchand chez qui vous avez achete votre secheuse. Pour des informations sur la commande, veuillez vous referer & la section "Assistance ou service". Vous pouvez egalement contacter le marchand chez qui vous avez achete

votre secheuse.

• Trousse d'installation pour maison mobile. Demander le numero de piece 346764.

• Systeme d'evacuation en metal.

II vous faudra

• Un emplacement permettant une evacuation appropriee. Voir "Exigences concernant I'evacuation".

• Un circuit separe de 30 amperes.

• Une prise electrique avec liaison & la terre situee a moins de 2 pi (61 cm) de I'un des c6tes de la secheuse. Voir "Specifications electriques".

• Un plancher robuste capable de supporter un poids total (secheuse et charge) de 200 Ib (90,7 kg). Le poids combine d'un appareil voisin dolt egalement 6tre pris en compte.

• Un plancher horizontal avec une pente maximale de 1" (2,5 cm) sous I'ensemble de la secheuse.

Ne pas faire fonctionner la secheuse &des temperatures inferieures & 45°F (7°C). A des temperatures inferieures, la

secheuse risque de ne plus s'arr6ter & lafin d'un programme automatique. Les temps de sechage risquent alors d'augmenter.

La secheuse ne dolt pas 6tre installee ou remisee dans un endroit oQ elle sera exposee & I'eau et/ou aux intemperies.

Verifier les reglements Iocaux. Certains codes limitent ou

n'autorisent pas I'installation des secheuses dans un garage, un placard, une maison mobile ou une chambre & coucher. Communiquer avec I'inspecteur des b&timents local.

REMARQUE :Aucun autre appareil consommant un combustible ne dolt 6tre installe dans le m6me placard.

Degagements de separation _ respecter L'emplacement dolt 6tre assez grand pour permettre d'ouvrir

completement la porte de la secheuse.

Dimensions de la s_cheuse

*La plupart des installations requierent un espace minimum de

5" (12,7 cm) derriere la secheuse pour le conduit d'evacuation avec coude. Voir "Exigences concernant I'evacuation".

Espacement minimum pour une installation dans un encastrement ou dans un placard

On recommande les dimensions d'espacement suivantes pour cette secheuse. Cette secheuse a et6 testee pour une installation avec degagement de 0" (0 cm) sur les c6tes et & I'arriere. L'espacement recommande dolt _tre consider6 pour les raisons

suivantes :

• On prevoira un peu plus d'espace pour faciliter I'installation et I'entretien.

• Un espace supplementaire peut _tre requis pour les moulures de porte et de plancher et pour les plinthes.

• Un espace supplementaire de tousles c6tes de la secheuse est recommande pour reduire le transfert du bruit.

• Si une porte de placard est installee (pour une installation encastree), on dolt prevoir des orifices d'entree d'air en haut et en bas de la porte. Les portes a claire-vole offrant une surface equivalente de passage de I'air sont acceptables.

• II faut aussi prendre en compte I'espace requis entre les appareils voisins.

• Un espacement supplementaire est requis si I'air est evacu6 & I'arriere de la secheuse sur le c6te gauche ou droit.

_f 3"*

_Sp0 2.

18"*iC

(45,7cm)

__!L

l_J

(310cm2) • _"

2@o2*

(155cm2)- I_1.

1"-_ _ 29"_ _1" _1"*I_ 29,4"_1s"

(2,5cm) (2,5cm) (2,5cm)

*Espacement requis

Exigences suppl_mentaires pour I'installation dans une maison mobile

Cette secheuse convient aux installations pour maison mobile. L'installation dolt _tre conforme & la norme canadienne sur les

maisons pr6fabriqu_es CAN/CSA-Z240 MH.

(73,7crn) (74,3crn) (12,7crn)

A B

A. Encastrement B. Vue lat_rale - placard ou endroit exigu

C. Porte du placard avec orifices d'entr_e d'air

(7,6cm)

___ 3"*

(7,6cm)

L'installation dans une maison mobile exige :

• Un systeme d'evacuation en metal qui peut _tre achete chez votre marchand.

• Trousse d'installation pour maison mobile Piece n° 346764. Voir la section "Outillage et pieces" pour des renseignements

sur la commande. II faut prendre des dispositions speciales pour I'apport d'air

de I'exterieur dans la secheuse. L'ouverture (telle qu'une fen_tre a proximite) devrait _tre au moins deux fois plus grande que I'ouverture de decharge de la secheuse.

Risque de choc _lectrique

Brancher sur une prise a 3 alv_oles reli_e a Jaterre. Ne pas enlever la broche de liaison a la terre.

Ne pas utiliser un adaptateur. Ne pas utiliser un c&ble de rallonge.

Le non=respect de ces instructions peut causer un d_c_s, un incendie ou un choc _lectrique.

L'appareil dolt _tre alimente par un circuit de 120 V, CA seulement, 60 Hz, 15 ou 20 amperes, protege par fusible. On recommande I'emploi d'un fusible ou d'un disjoncteur temporis& II est recommande de raccorder I'appareil sur un circuit distinct exclusif & cet appareil.

INSTRUCTIONS DE LIAISON A LA TERRE

[] Pour une s_cheuse reli_e & la terre et connect_e par

un cordon :

Cette s_cheuse dolt @re reli_e & la terre. En cas de mauvais

fonctionnement ou de panne, la liaison & la terre r_duira le

risque de choc _lectrique en offrant au courant _lectrique un acheminement d'_vacuation de moindre r_sistance. Cette

s_cheuse est aliment_e par un cordon _lectrique comportant

un conducteur reli_ & la terre et une fiche de branchement munie d'une broche de liaison & la terre. La fiche dolt @re

branch_e sur une prise appropri_e qui est bien install_e et reli_e & la terre conform_ment &tousles codes et reglements

Iocaux.

AVERTISSEMENT " Le raccordement incorrect de

cet appareil au conducteur de liaison & la terre peut susciter

un risque de choc _lectrique. En cas de doute quant & la qualit_ de liaison & la terre de la s_cheuse, consulter un

_lectricien ou un technicien ou un personnel qualifi& Ne pas

modifier la fiche de branchement fournie avec la s_cheuse; si la fiche ne correspond pas &la configuration de la prise de courant, demander &un _lectricien qualifi_ d'installer une

prise de courant appropri_e.

CONSERVEZ CES INSTRUCTIONS

Risque d'explosion

Utiliser une canalisation neuve d'arriv_e de gaz

approuv_e par CSA International. installer un robinet d'arr_t.

Bien serrer chaque organe de connexion de la

canalisation de gaz.

En cas de connexion au gaz propane, demander a une

personne qualifi_e de s'assurer que la pression de gaz

ne d_passe pas 33 cm (13 po) de la colonne d'eau. Par personne qualifi_e, on comprend :

le personnel autoris_ de chauffage, le personnel autoris_ d'une compagnie de gaz, et

le personnel d'entretien autoris& Le non=respect de ces instructions peut causer

un d_c_s, un explosion ou un incendie.

• Pour le gaz naturel, ne pas utiliser de conduits en cuivre.

• Adaptateur de 3/8"x tuyau NPT de 3/8"entre le conduit de la secheuse et le tuyau approuve de 3/8".

• Pour les Iongueurs superieures & 20 pi (6,1 m), on doit utiliser des tuyaux plus gros et un adaptateur de grosseur differente.

• Si la secheuse a et6 convertie au gaz de petrole liqu6fi6, on peut utiliser un tuyau en cuivre compatible au gaz de petrole liqu6fi6 de 3/8".Si la Iongueur totale de la canalisation d'arrivee de gaz est superieure a 20 pi (6,1 m), utiliser une plus grosse conduite.

REMARQUE : On doit utiliser un compose d'etanch6it6 des tuyauteries resistant a I'action du gaz de petrole liqu6fi& Ne pas utiliser de ruban TEFLON ®t.

• Doit comporter un robinet d'arr_t du gaz : Un robinet d'arr_t manuel individuel doit _tre installe

conformement & la norme B149.1 du Code des installations au gaz naturel ou propane. II est recommande qu'un robinet

d'arr_t manual individuel soit installe en de(_&de 6 pi (1,8 m) de la secheuse. L'emplacement doit _tre facile a atteindre pour I'ouverture et la fermeture.

A C E

B D

Type de gaz

Gaz naturel :

Cette secheuse est equip6e pour une alimentation au gaz naturel. Sa conception est homologuee par la CSA International pour I'alimentation au gaz de petrole liqu6fi6 (propane ou butane), avec conversion appropriee.

• Cette secheuse doit _tre equip6e du brQleur convenable, correspondant au gaz specifique qui alimente I'habitation. L'information sur le brQleur se trouve sur la plaque signaletique dans le Iogement de la porte de la secheuse. Si cette information ne correspond pas au type de gaz disponible, contacter votre marchand ou composer les numeros de tel6phone indiqu6s sur la page de couverture de

ce manuel.

Conversion au gaz de p_trole liqu_fi_ :

Un technicien qualifi_ dolt effectuer la conversion. Ne pas entreprendre de convertir I'appareil pour I'utilisation d'un

gaz different de celui indiqu6 sur la plaque signaletique sans d'abord consulter le fournisseur de gaz. Pour des renseignements sur la commande d'un ensemble de conversion au gaz de petrole liqu6fi6, se ref6rer & la section "Assistance ou service". Demander la piece n° 49572.

Canalisation d'arriv6e de gaz

• La canalisation doit comprendre un connecteur obture (filetage NPT de ½"ou plus) accessible pour le raccordement

de I'instrument de mesure immediatement en amont de la connexion d'alimentation en gaz de la secheuse (voir

I'illustration).

• Un tuyau IPS de 1/2"est recommand&

• Pour les Iongueurs inferieures a 20 pi (6,1 m), on peut utiliser des tuyaux approuves de 3/8"(aluminium ou cuivre) si les codes Iocaux et lefournisseur de gaz le permettent.

A. Connecteur souple de %"

B.Adaptateur du tuyau au joint conique de _ "

C. Connecteur obtur_ (filetage NPT de _" ou plus) D. Canafisation d'arriv_e de gaz NPT de Y2"

E. Robinet d'arr#t du gaz

Exigences concernant le raccordement au gaz

• Utiliser un coude et un adaptateur NPT de 3/8"x 3/8"entre le connecteur de gaz flexible et la conduite de gaz de la secheuse, tel que necessaire pour eviter le pincement.

• Utiliser uniquement un compose d'etancheite des tuyauteries. Ne pas utiliser de ruban TEFLON ®t.

• On doit raccorder la secheuse &la conduite d'alimentation en gaz & I'aide d'un connecteur de gaz flexible homologu_ qui

respecte les normes applicables aux connecteurs utilises avec des appareils menagers & gaz, CSA 6.10.

Caract_ristiques d'alimentation du brOleur

Altitudes sup_rieures a 10 000 pi (3 048 m) :

• Si la secheuse doit _tre utilisee &une altitude superieure & 10 000 pi (3 048 m), on doit reduire de 4 % le debit thermique du brQleur indiqu_ sur la plaque signaletique pour chaque tranche de 1000 pi (305 m) d'augmentation de I'altitude.

I_preuve sous pression de I'alimentation en gaz

• La secheuse doit _tre deconnectee du systeme de canalisation d'alimentation en gaz Iors de tout test de pression & des pressions plus elevees que 1/2Ib/po 2.

¢®TEFLON est une marque deposee de E.I. Du Pont De Nemours et Compagnie.

Canalisation d'arriv_e de gaz de la s_cheuse

En cas de nouveau syst_me d'_vacuation

• La canalisation d'arrivee de gaz sortant & I'arriere de la secheuse est dotee d'un filetage m&le de 3/8".

2 It

(5,1crn)

3/4"

(1,9crn)

A. Tuyau NPT de la s_cheuse de _"

Risque d'incendie

Utiliser un conduit d'_vacuation en m_tal Iourd. Ne pas utiliser un conduit d'_vacuation en plastique.

Ne pas utiliser un conduit d'_vacuation en feuille

de m_tal.

Le non=respect de ces instructions peut causer un d_c_s ou un incendie.

AVERTISSEMENT " Pour reduire le risque d'incendie,

cette secheuse doit €:VACUER L'AIR A L'EXT¢:RIEUR. IMPORTANT : Observer les dispositions de tousles codes et

reglements en vigueur. Le conduit d'evacuation de la secheuse ne doit pas _tre

connecte & une evacuation de gaz, une cheminee, un mur, un plafond ou un vide de construction.

Materiel pour I'_vacuation

• Utiliser un conduit d'evacuation en metal Iourd. Ne pas utiliser un conduit de plastique ou en feuille metallique.

• Utiliser un conduit d'evacuation en metal Iourd de 4" (10,2 cm) et des brides de serrage. Les produits

d'evacuation DURASAFE TM sont recommandes.

Conduit d'_vacuation en m_tal Iourd de 4" (10,2 cm)

On peut se procurer les produits d'evacuation DURASAFE TM aupres du marchand ou en telephonant au service Pieces et accessoires de Whirlpool. Pour plus de renseignements, voir

la section "Assistance ou service".

Conduit m_tallique rigide

• Pour un meilleur rendement de sechage, on recommande d'utiliser des conduits metalliques rigides.

• On recommande d'utiliser un conduit metallique rigide pour reduire les risques d'ecrasement et de deformation.

Conduit m_tallique flexible

• Les conduits metalliques flexibles sont acceptables seulement dans la mesure oQils sont accessibles en vue du

nettoyage.

• Un conduit metallique flexible doit _tre totalement deploye et soutenu Iorsque la secheuse est & sa position finale.

• Enlever tout exces de conduit flexible pour eviter tout affaissement ou deformation susceptible de reduire la

capacite d'evacuation et le rendement.

• Ne pas installer le conduit metallique flexible dans les cavites fermees des murs, plafonds ou planchers.

Coudes

Les coudes & 45° permettent une meilleure circulation de I'air que les coudes & 90°.

En cas d'utilisation du syst_me d'_vacuation existant

• €:liminer la charpie sur toute la Iongueur du systeme et veiller &ce que le clapet de decharge ne soit pas obstrue par une

accumulation de charpie.

• Remplacer tout conduit de plastique ou de feuille metallique par un conduit de metal Iourd rigide ou souple.

• Examiner le tableau de Iongueur du conduit d'evacuation. Apporter les modifications necessaires au systeme d'evacuation pour atteindre le meilleur rendement de sechage.

Bon Meilleur

Brides de serrage

• Utiliser des brides pour sceller tousles joints.

• Le conduit d'evacuation ne doit pas _tre connecte ou fixe avec des vis ou avec tout autre dispositif de serrage qui se

prolonge & I'interieur du conduit. Ne pas utiliser de ruban adhesif pour conduit.

Bride de serrage

+ 67 hidden pages