Whirlpool WFW94HEXR, WFW94HEXW, WFW95HEXR, WFW95HEXW Use And Care Manual

0 (0)

Use & Care Guide Guide d’ulisaon et d’entreen

FRONT-LOADING AUTOMATIC WASHER LAVEUSE DE CHARGEMENT FRONTAL

If you have any problems or quesons, visit us at www.whirlpool.com

W10254493A W10254494A - SP

Para obtener acceso al

Manual de uso y

cuidado en español, o para obtener información adicional acerca de su producto, visite:

www.whirlpool.com

Designed to use only HE

High Eciency detergents.

Conçue pour l’ulisaon d’un détergent haute ecacité seulement.

Cered to Sanize and to Reduce Allergens Homologué pour assainir

FRONT-LOADING

LAVEUSE DE

AUTOMATIC WASHER

TABLE OF CONTENTS

WASHER SAFETY ................................................................................. 2

ACCESSORIES ...................................................................................... 3

CONTROL PANEL AND FEATURES ........................................................ 4

CYCLE GUIDE ....................................................................................... 6

USING YOUR WASHER ........................................................................ 8

CYCLE STATUS LIGHTS ....................................................................... 12

WASHER MAINTENANCE .................................................................. 13

TROUBLESHOOTING ......................................................................... 16

WARRANTY ....................................................................................... 23

ASSISTANCE OR SERVICE ..................................................... Back Cover

WASHER SAFETY

CHARGEMENT FRONTAL

Table de Maères

ACCESSOIRES ...................................................................................... 3

SÉCURITÉ DE LA LAVEUSE ................................................................. 24

TABLEAU DE COMMANDE ET CARACTÉRISTIQUES ........................... 26

GUIDE DES PROGRAMMES ............................................................... 28

UTILISATION DE LA LAVEUSE ............................................................ 31

ENTRETIEN DE LA LAVEUSE ..............................................................37

DÉPANNAGE ..................................................................................... 40

GARANTIE ......................................................................................... 47

ASSISTANCE OR SERVICE ......................................... Couverture arrière

ACCESSORIES

Customize your new washer and dryer with the following genuine Whirlpool accessories. For more information on options and ordering, contact your dealer, or visit: www.whirlpool.com.

15" Pedestal

Color matched pedestals raise the washer and dryer to a more comfortable working height. The large drawer provides convenient storage. Available in matching colors.

Piédestal de 15"

Les piédestaux aux coloris assortis surélèvent la laveuse et la sécheuse pour les amener à une hauteur d’utilisation plus confortable. Le grand tiroir offre une capacité de rangement pratique. Coloris assortis disponibles.

Worksurface

The worksurface bridges the washer and dryer, and provides a convenient working and storage area.

Surface de travail

La surface de travail établit la liaison entre la laveuse et la sécheuse et offre une zone de travail et d’entreposage pratique.

ACCESSOIRES

Personnalisez votre nouvelle laveuse et sécheuse grâce aux authentiques accessoires Whirlpool suivants. Pour plus d’informations sur les options et sur les possibilités de commande, contactez votre revendeur ou consultez : www.whirlpool.com.

Stack Kit

If space is at a premium, the stack kit allows the dryer to be installed on top of the washer.

Ensemble de superposition

Si l’espace disponible est restreint, l’ensemble de superposition permet à la sécheuse d’être installée par dessus la laveuse.

CONTROL PANEL AND FEATURES

Not all features and cycles are available on all models.

Steam models

Non-Steam models

A HE detergent B Liquid fabric

softener

C Chlorine bleach D Oxi Dispense

POWER BUTTON

Press to turn the washer on and off. Press to stop/cancel a cycle at any time.

WASH CYCLE KNOB

Use your Wash Cycle Knob to select available cycles on your washer. Turn the knob to select a cycle for your laundry load. See “Cycle Guide” for detailed descriptions of cycles.

A HE detergent B Liquid fabric

C Chlorine bleach

softener

START/PAUSE BUTTON

Press and hold to start a cycle, or press once while a cycle is in process to pause it.

DELAY START BUTTONS

Use these buttons to delay the start of the wash cycle by up to 16 hours on models with Steam, and 12 hours on non-Steam models.

LED DISPLAY AND SETTINGS BUTTONS

When you select a cycle, its default settings will light up and the Estimated Time Remaining will be displayed. Factors such as load size, wash temperature, and water pressure may affect the time shown in the display. Overloading, unbalanced loads, or excessive suds may cause the washer to adjust the cycle time, as well.

Use the buttons along the bottom of the display to adjust settings. See “Cycle Guide” for available settings on each cycle. Not all settings are available with all cycles.

Cycle Status Lights

The indicator bar at the top of the display will let you know what stage of the wash cycle is in process, as well as when the door is locked or if you can still add an item. For more information on each stage, see “Cycle Status Lights”.

Temperature

The recommended wash temperature is preset for each cycle. You may also select a wash temperature based on the type of fabric and soils being washed. For best results, use the warmest wash water safe for your fabric, following the garment label instructions. All wash temperatures feature a cold rinse, except Warm*, which has a warm wash and a warm rinse.

Spin Speed

This washer automatically selects the spin speed based on the cycle selected. Some preset speeds can be changed.

•

Faster spin speeds mean shorter dry times, but may increase wrinkling in your load.

•

Slower spin speeds reduce wrinkling, but will leave your load more damp.

Soil Level

Soil level (wash time) is preset for each wash cycle. As you press the Soil Level button, the cycle time will increase or decrease in the Estimated Time Remaining display.

For most loads, use the soil level that is preset with the cycle you have chosen. For heavily soiled and sturdy fabrics, press Soil Level to select more wash time. For lightly soiled and delicate fabrics, press Soil Level to select less wash time. Lower soil level settings will help reduce tangling and wrinkling.

Cycle Signal

Use this option to adjust volume of the signal that sounds at end of cycle.

NOTE: You may also turn off the tones that sound when a button is pressed. Press and hold the EcoBoost button for about one second to turn button sounds on or off.

OPTION BUTTONS

Use these buttons to activate additional wash options or additional features on the washer. Not all options are available on all models.

EcoBoost™ option

Press to activate the EcoBoost™ option. The EcoBoost™ option provides additional energy savings through reduced hot water usage and maintains cleaning performance by lengthening the wash time on some cycles. NOTE: Press and hold the EcoBoost button for about one second to turn button sounds on or off.

OXI Dispense (on some models)

Turn this option on when using Oxi boost products in the dispenser to ensure they are dispensed at the optimal time in the cycle. Oxi Dispense is not available on the Quick Wash, Delicates, or Handwash cycle.

Presoak

Press to add a Presoak to a wash cycle to help loosen tough stains. On models with Steam, you may add detergent to the Oxi compartment for Presoak.

Deep Clean (on some models)

The Deep Clean option adds additional soak and wash time to many cycles to help remove tough stains. An integrated heater helps to maintain optimal wash temperatures. See the “Cycle Guide” for cycles that allow the Deep Clean option.

Extra Rinse

Activate this option to add an extra rinse to most cycles. NOTE: Some cycles include this feature as a default. See “Cycle Guide” for details.

Drum Light (on some models)

Press to turn the LED drum light on or off. The light will also turn on when the door is open, and turn off automatically after about 5 minutes.

Control Lock

Press and hold for 3 seconds to lock the controls to avoid unwanted changes or operation. Press and hold 3 seconds again to unlock. You may still press START/PAUSE to pause the cycle, or press the POWER button to turn the washer off.

DEEP CLEAN with Steam (Steam models only)

The Deep Clean with Steam option adds additional soak and wash time to many cycles to help remove tough stains, as well as a Steam boost for added cleaning power. An integrated heater helps to maintain optimal wash temperatures. See the “Cycle Guide” for cycles that allow the Deep Clean option.

FANFRESH™ OPTION

With the washer on, press to activate the FanFresh™ option. This will periodically tumble the load after the end of the cycle for up to 16 hours while the integrated fan circulates air through the washer to reduce humidity. You may also activate the FanFresh option without running a cycle by pressing and holding for 3 seconds, then pressing START/PAUSE.

NOTES:

The door will lock while the FanFresh option is active.

•

Press the POWER/CANCEL button to stop the cycle and unlock the door.

•

FanFresh is not available if the spin speed is set to No Spin.

PRECISION DISPENSE DRAWER

The Precision Dispense drawer gives you the convenience of automatically adding HE detergent, liquid chlorine bleach, and fabric softener to the wash load at the proper time. Steam models also feature an Oxi /color-safe bleach compartment. See “Using the Dispenser” for information on using the dispenser drawer.

High Efciency “HE” detergent compartment

This compartment holds liquid or powdered HE detergent for your main wash cycle.

For models without an Oxi dispenser compartment, liquid or powdered color-safe bleach or Oxi booster product may be added to the HE detergent compartment along with the same type of detergent, liquid or powdered.

Liquid fabric softener compartment

Automatically dilutes and dispenses liquid fabric softener at the optimum time in the cycle.

Use only liquid fabric softener in this dispenser.

Liquid chlorine bleach compartment

Automatically dilutes and dispenses liquid chlorine bleach at the optimum time during the rst rinse after the wash cycle. This compartment cannot dilute powdered bleach.

Oxi Dispense compartment (Steam models only)

This compartment holds measured liquid or powdered Oxi booster product and dispenses it at the proper time in the cycle. Oxi Dispense is not available on the Quick Wash, Delicates, or Handwash cycle.

This compartment may also be used to hold detergent when using the Presoak option.

CYCLE GUIDE — STANDARD CYCLES

Settings and options shown in bold are default settings for that cycle. For best fabric care, choose the cycle that best ts the load being washed. Not all cycles and options are available on all models.

For best performance, not all settings are available with each cycle, and some options cannot be used together.

Items to wash

using default

cycle settings:

Normally soiled cottons, Normal/ Hot Extra High Heavy Extra Rinse This cycle combines medium-speed linens, sheets, and Casual Warm* High Normal Deep Clean** tumbling and a high-speed spin. mixed garment loads Warm Medium Light Presoak This cycle is designed to provide Cold No Spin FanFresh the most energy efciency. Delay Start

Sturdy colorfast Heavy Sanitize fabrics and heavily Duty Hot High Normal Deep Clean** high-speed nal spin help provide soiled garments, Warm* Medium Light Presoak optimal cleaning and reduce and towels Warm Low EcoBoost drying times. Cold No Spin FanFresh Delay Start

Heavily soiled white Whitest Sanitize fabrics and garments Whites Hot High Normal Deep Clean** liquid chlorine bleach action. Warm* Medium Light Presoak An Extra Rinse helps remove any Warm Low EcoBoost bleach residue in clothes. Cold No Spin FanFresh Delay Start

Blankets, comforters, Bulky Sanitize jackets, and small rugs Items Hot Medium Normal Deep Clean** saturate the load, followed by Warm* Low Light Presoak medium wash speeds and a Warm No Spin EcoBoost medium-speed spin to maintain Cold FanFresh load balance. Delay Start

Sturdy garments and Allergen household items Hot High Normal Deep Clean** allergens such as dust mites and exposed to possible Medium Light Presoak pet dander from normally-soiled allergens FanFresh items. Delay Start

Sheer fabrics, Delicate Warm* Extra High Normal Extra Rinse This cycle combines low-speed lingerie, sweaters, and Warm High Light FanFresh tumbling and low-speed spin lightly-soiled shirts, Cold Medium Delay Start for gentle fabric care and reduced blouses, trousers, Low wrinkling. pants, and skirts No Spin

Small loads of items Hand Wash Warm* Extra High Normal Extra Rinse Similar to the way garments are labeled “handwash”: Warm High Light FanFresh hand-washed in a sink, this cycle undergarments, Cold Medium Delay Start combines periods of low-speed washable silks Low tumbling and soaking. NOTE: Use No Spin mesh garment bags as needed.

Cycle:

††

Sanitize† Extra High Heavy Extra Rinse Uses more water to ush out

Wash

Temperature*:

†

Extra High Heavy Extra Rinse High-speed tumbling and a

†

Extra High Heavy Extra Rinse Hot wash temperatures ensure

†

High Heavy Extra Rinse Uses an initial soak to completely

Spin

Speed:

Soil

Level:

Available

Options:

Cycle Details:

* All temperature selections feature a Cold rinse, except Warm*, which features a warm wash and a warm rinse. ** Deep Clean on non-Steam models. Deep Clean with Steam on Steam models. See “Control Panel and Features” for additional

information.

Models: WFW94HE**, WFW95HE**

† Sanitize

Cycles certied by NSF International, an independent, third party testing and certication organization are those with the sanitize temperature selection available. The certication veried that these cycles reduce 99.9% of bacteria typically found on clothing, bedding, and towels. There is no carryover of bacteria between loads after the cycle is complete. Only cycles with sanitize wash temperature selected have been designed to meet the requirements of NSF Protocol P172 for Sanitizing Effectiveness.

†† Allergen

Allergen cycle certied by NSF International, an independent, third party testing and certication organization. The certication veried that this cycle reduced tested allergens by at least 95.0% and maintained the water temperature necessary to kill dust mites. Only the allergen cycle has been designed to meet the requirements of NSF Protocol P351 for Allergen Reduction Performance effectiveness.

CYCLE GUIDE — SPECIAL-PURPOSE CYCLES

For best performance, not all settings are available with each cycle, and some options cannot be used together.

Items to wash

using default

cycle settings:

Swimwear, items Rinse/Drain Warm* Extra High N/A Extra Rinse This cycle adds water, then uses that need rinsing only & Spin Warm High FanFresh high-speed tumbling and an extra Cold Medium Delay Start high-speed spin. For some fabrics, Low you may wish to set the spin speed No Spin to a lower setting.

Wet load of clothes Rinse/Drain N/A Extra High N/A FanFresh Use Drain & Spin to remove excess & Spin High water from the load by choosing Medium Rinse/Drain & Spin and turning off Low Extra Rinse. Spin speed can be set to a lower setting.

Small loads of 3–4 Quick Wash Hot Extra High Heavy Extra Rinse For small loads (3–4 items) needed lightly soiled garments Warm High Normal FanFresh quickly. This cycle combines Cold Medium Light Delay Start high-speed tumbling, a shortened Low wash time, and a high-speed spin for reduced drying times.

Jeans and denims Jeans Warm Medium Heavy Extra Rinse Cycle combines low-speed (on some models) Cold Low Normal Presoak tumbling and medium-speed spins No Spin Light FanFresh to provide gentle care for jeans and Delay Start denims.

No clothes in washer Clean Washer Use monthly with Affresh with Affresh sure no clothes are in washer. The Clean Washer light will ash every 30 loads to remind you to run the Clean Washer cycle.

* All temperature selections feature a Cold rinse, except Warm*, which features a warm wash and a warm rinse.

Cycle:

Wash

Temperature*:

the interior of the washer. Make

Spin

Speed:

Soil

Level:

Available

Options:

Cycle Details:

to clean

Load Size Recommendations

For best results, follow the load size recommendations noted for each cycle.

Small load: Fill the washer drum with 3-4 items, not more than 1/4 full.

Medium load: Fill the washer drum up to about 1/2 full.

Large load: Fill the washer drum up to about 3/4 full.

Extra-large load: Fill the washer drum, but make sure clothes can tumble freely.

For best results, avoid packing tightly.

USING YOUR WASHER

Choosing the Right Detergent

Use only High Efciency detergents. The package will be marked “HE” or “High Efciency.” Low-water washing creates excessive sudsing with a regular non-HE detergent. Using regular detergent will likely result in longer cycle times and reduced rinsing performance. It may also result in component failure and, over time, build-up of mold or mildew. HE detergents are made to produce the right amount of suds for the best performance. Follow the manufacturer’s instructions to determine the amount of detergent to use.

Use only High Efciency (HE) detergent.

First wash cycle without laundry

Before washing clothes for the rst time, if not completed during the nal installation step, choose the QUICK WASH cycle and run it without clothes. Use only HE detergent. Use 1/2 the manufacturer’s recommended amount for a medium-size load. This initial cycle serves to ensure the interior is clean before washing clothes.

1. Sort and prepare your laundry

IMPORTANT:

n Empty pockets. Loose change, buttons, or any small object

can plug pumps and may require a service call.

n Close zippers, fasten hooks, tie strings and sashes, and

remove non-washable trim and ornaments.

n Mend rips and tears to avoid further damage to items

during washing.

n Turn knits inside out to prevent pilling. Separate lint-takers

from lint-givers. Synthetics, knits, and corduroy fabrics will pick up lint from towels, rugs, and chenille fabrics.

n Do not dry garments if stains remain after washing, because

heat can set stains into fabric.

n Always read and follow fabric care labels and laundry

product instructions. Improper usage may cause damage to your garments.

2. Load laundry into washer

Sort items by recommended cycle, water temperature, and colorfastness. Separate heavily soiled items from lightly soiled. Separate delicate items from sturdy fabrics. Treat stains promptly and check for colorfastness by testing stain remover products on an inside seam.

Open the washer door. Place a load of sorted clothes loosely in the washer. Items need to move freely for best cleaning and to reduce wrinkling and tangling. Close the washer door by pushing it rmly until the latch clicks.

n Depending on load type and cycle, the washer can be fully

loaded, but not tightly packed. Washer door should close easily. See “Cycle Guide” for loading suggestions.

n Mix large and small items and avoid washing single items.

Load evenly.

n Wash small items in mesh garment bags. For multiple items,

use more than one bag and ll bags equally.

Using the Dispenser

To use the Precision Dispense drawer:

1. Open the dispenser drawer.

2. Add laundry products as described in steps 3–6.

3. Slowly close the dispenser drawer. Make sure it is

completely closed.

NOTE: A small amount of water may remain in the dispensers from the previous wash cycle. This is normal.

3. Add HE detergent to dispenser

Models with a 4-compartment dispenser

HE detergent compartment

Pour a measured amount of HE detergent into detergent compartment. For powdered detergent, slide the selector to the left. For liquid detergent, slide the selector to the right.

Do not overll; adding too much detergent may cause detergent to be dispensed into the washer too early.

Use only High Efciency

(HE) detergent.

Models with a 3-compartment dispenser

HE detergent compartment

Pour a measured amount of HE detergent into detergent compartment. For powdered detergent, slide the selector to the left. For liquid detergent, slide the selector to the right.

Do not overll; adding too much detergent may cause detergent to be dispensed into the washer too early.

Use only High Efciency

(HE) detergent.

Powdered detergent:

Slide the selector to the left.

When using the Presoak option, 1/3 of the detergent for the load may be placed in the Oxi compartment in place of an Oxi product.

IMPORTANT: Use powdered detergent when using the

Delay Wash option. Liquid detergent may seep out before the wash begins.

Liquid detergent:

Slide the selector to the right.

Powdered detergent:

Slide the selector to the left.

If you would like to use powdered or liquid oxi-type boosters or color-safe bleach, follow the manufacturer’s recommendations for placement. If no recommendation is available, you may add powdered or liquid oxi-type boosters or color-safe bleach to the detergent compartment with the same type of detergent, powdered or liquid.

IMPORTANT: Use powdered detergent when using the Delay Wash option. Liquid detergent may seep out before the wash begins.

Liquid detergent:

Slide the selector to the right.

4. Add fabric softener to dispenser

(if desired)

Liquid fabric

softener

Four compartment dispenser shown

compartment

6. Add Oxi or color safe bleach

(on some models)

Oxi / color safe bleach compartment

Four compartment dispenser shown

Pour a measured amount of liquid fabric softener into liquid fabric softener compartment. Always follow manufacturer’s directions for correct amount of fabric softener based on your load size.

Fabric softener is always dispensed in the last rinse, even if Extra Rinse is selected.

IMPORTANT: Do not overll, dilute, or use more than 1/4 cup (60 mL) of fabric softener. Do not ll past the MAX line. Overlling dispenser will cause fabric softener to immediately dispense into washer.

Do not spill or drip any fabric softener onto the clothes.

Do not use liquid fabric softener dispenser balls in this

washer. They will not dispense correctly.

5. Add liquid chlorine bleach

to dispenser (if desired)

On models with a 4-compartment dispenser, add Oxi booster or color safe bleach to the Oxi compartment. Be sure to select the OXI Dispense option.

Always follow the manufacturer’s recommendations.

When using the Presoak option, 1/3 of the detergent for the load may be placed in the Oxi compartment in place of an Oxi product.

For models without an Oxi compartment: If you would like to use powdered or liquid oxi-type boosters or color-safe bleach, follow the manufacturer’s recommendations for placement. If no recommendation is available, you may add powdered or liquid oxi-type boosters or color-safe bleach to the detergent compartment with the same type of detergent, powdered or liquid.

7. Press POWER to turn on washer

Four compartment dispenser shown

Add a measured amount of liquid chlorine bleach to the bleach compartment. Do not overll, dilute, or use more than 2/3 cup (165 mL). Use a measuring cup with a pour spout; do not guess.

Do not ll beyond the “MAX” level. Overlling will cause bleach

to dispense too soon and may cause garment damage. Do not add color-safe bleach or oxi-product to this dispenser.

Liquid chlorine

bleach

compartment

Slowly close the Precision Dispense drawer. Make sure the drawer is closed completely, then press and hold POWER to turn on the washer.

8. Select CYCLE

FanFresh

Delay Start

Door LockedSensing

Estimated Time Remaining

Delay Set

Steam model shown

Turn cycle knob to select your wash cycle. See “Cycle Guide” for details on cycle features. Not all options and settings are available on all cycles.

9. Adjust settings, if desired

11. Setting a delayed start

If you do not want to begin a cycle immediately, you may choose the DELAY START option. This will delay the start of the wash cycle by up to 16 hours on models with Steam, and 12 hours on non-Steam models.

To set a delayed Start:

1. Press DELAY START s and t buttons to set the desired

delay time.

2. Press START/PAUSE to set the delay. The delay countdown

has started when the START/PAUSE light stops blinking.

12. Press and hold START/PAUSE

to begin wash cycle

Steam model shown

The display will show the default settings for the selected cycle. If desired, press the button beneath each setting to adjust the Temperature, Soil Level, Spin Speed, and Cycle Signal. Adjusting the Soil Level will change the Estimated Time Remaining. Overloading, unbalanced loads, or excessive suds may also cause the washer to increase the cycle time.

NOTE: Not all settings are available on all cycles. See “Cycle Guide” for available settings.

10. Select any additional options

Steam model shown

Press and hold the START/PAUSE button to start the wash cycle. To pause a cycle in progress, press the START/PAUSE button once, then press and hold again to continue the cycle. To cancel a cycle, press the POWER button.

Once you press and hold START/PAUSE, you will hear the door lock, unlock, and lock again. The washer door will remain locked during the wash cycle.

Unlocking the door to add garments:

If you need to open the door to add 1 or 2 missed garments, you may do so while the “Add a Garment” light is lit.

Press START/PAUSE once; the door will unlock once the washer movement has stopped. This may take several minutes. Then close door and press START/PAUSE again to restart the cycle.

To add additional options to the cycle, such as the EcoBoost™ option, Deep Clean/Deep Clean with Steam (on some models), or Presoak, press the button for the desired options to add them to the selected cycle.

NOTE: Not all options are available with all cycles. See “Cycle Guide” for available options.

Cycle Status Lights

Steam model shown

The Cycle Status Lights show the progress of a cycle. At each stage of the process, you may notice sounds or pauses that are different from traditional washers.

Door Locked Door Locked will light to indicate that the door is locked and

cannot be opened without rst pausing or canceling the cycle.

FanFresh

™

The FanFresh™ indicator will light when the FanFresh™ option

is active. During this time, the washer will occasionally tumble the load while a fan circulates fresh air through the washer.

Delay Set If a Delay Start is set, the Delay Set indicator will light and the

delay time will count down in the display.

Add a Garment When Add a Garment is lit, you may pause the washer, open

the door, and add items.

Sensing When the START/PAUSE button is pressed, the washer will

rst perform a self-test on the door lock mechanism. You will hear a click, the drum will make a partial turn, and the door will unlock briey before locking again.

Once the door has locked the second time, the washer will

begin tumbling and adding water. This sensing process will continue until the correct amount of water has been added for the load. You may also hear water owing through the dispenser, adding detergent to the load.

The displayed time may change as the washer goes through

the sensing process. This is normal.

Soak This portion of the cycle allows gentle tumbling for water and

detergent to soak into the load for optimal cleaning.

Wash

This is the main portion of the wash cycle. You will see the

washer tumble the load. The motor sounds may change at different stages in the cycle. The wash time is determined by the selected cycle and soil level along with your load size.

Rinse

You will hear sounds similar to the wash cycle as the

washer rinses and moves the load. If used, liquid chlorine bleach is added in the rst rinse. Fabric Softener is added in the last rinse.

Spin

The washer spins the load at increasing speeds for

proper water removal, based on the selected cycle and spin speed.

Steam (on some models)

This will light to show that the cycle is using a Steam boost

for added cleaning power.

Sanitized

Sanitized will light on cycles with a Sanitize setting once the

load has been washed at the proper temperature for the necessary time to meet NSF Sanitization requirements.

Done

Once the cycle is complete, this light will come on.

Remove the load promptly for best results.

13. Remove garments promptly

after cycle is nished

Promptly remove garments after cycle has completed to avoid odor and rusting of metal objects on garments. When unloading garments, pull back the door seal and check for small items between the tub and the basket.

If you will be unable to remove the load promptly, use the FanFresh FanFresh automatically activate the fan and tumble the load periodically for up to 16 hours.

NOTE:

n

™

option is selected, the washer will

After any wash cycle is completed, the door must be opened and then closed before a new cycle can begin.

A small amount of water may remain in the dispensers after the wash cycle is complete. This is normal.

This washer has a tight seal to avoid water leaks. To avoid odors, leave the door open to allow the washer to dry between uses.

™

option. If the

WASHER MAINTENANCE

CLEANING YOUR WASHER

Keep your washer as clean and fresh as your clothes. To keep washer interior odor-free, follow this recommended cleaning procedure at least once a month:

1. Make sure laundry drum is empty.

2. Using recommended AFFRESH

one tablet to washer basket

OR If using liquid chlorine bleach, add 1 cup (250 mL) to

liquid chlorine bleach dispenser.

IMPORTANT: Do not add detergent to CLEAN WASHER cycle. Do not use more than recommended amount of bleach to avoid damaging product over time.

3. Close washer door.

4. Press POWER.

5. Select CLEAN WASHER with Affresh

6. Press and hold START/PAUSE. NOTE: The basket will rotate, then the door will unlock,

lock again, and then the cycle will continue. The washer will add some water, and the basket will rotate while the washer runs a short sensing cycle. This will take approximately 3 minutes.

7. The cycle will determine whether clothing or other items

are in the washer. If no items are detected in the washer, it will proceed to Step 8.

If any items are detected in the washer, “rL” will be

displayed, and the WASH and CONTROL LOCK lights will light. The door will unlock. Open and remove any garments in the wash drum. Press POWER to cancel the error message. Then repeat steps 3–6 to start the cycle again.

8. Once the cycle has started, allow it to nish. If you must

cancel the cycle before it has nished, press POWER. “Int” (Interrupted) will appear in the display. It may take up to 10 minutes for the door to unlock.

9. After the cycle has ended, leave the door open slightly,

to allow for better ventilation and drying of washer interior.

To clean exterior:

1. Use a soft, damp cloth or sponge to wipe up any spills.

2. Use mild soap and water if needed. IMPORTANT: To avoid damaging washer nish, do not use

abrasive products.

washer cleaner, add

™

cycle.

WASHER MAINTENANCE

CLEANING THE DISPENSER

You may nd laundry product residue leftover in your dispenser compartments. To remove residue, follow this recommended cleaning procedure:

1. Pull dispenser drawer out until it stops.

2. Press down on the release tab and pull straight out to

remove the dispenser.

3. Lift off cover panel by

pulling straight up.

4. Wash dispenser and

cover panel in warm, soapy water, using a mild detergent.

5. Rinse with warm water.

6. Air dry or wipe with a

clean towel, slide cover panel back onto posts on dispenser.

7. Align edges of dispenser

with guides in washer, then slide dispenser back into slot.

IMPORTANT: Dispenser is

not dishwasher safe.

CLEANING THE DOOR SEAL

1. Open the washer door and remove any clothing or items

from the washer.

2. Inspect the gray colored seal between the door opening

and the basket for stained areas. Pull back the seal to inspect all areas under the seal and to check for foreign objects.

Seal

3. If stained areas are found, wipe down these areas of the

seal, using the procedure that follows.

a) Mix a dilute solution, using 3/4 cup (177 mL) of liquid

chlorine bleach, and 1 gal. (3.8 L) of warm tap water.

b) Wipe the seal area with the dilute solution, using

a damp cloth.

c) Let stand 5 minutes. d) Wipe down area thoroughly with a dry cloth and let the

washer interior air dry with door open.

IMPORTANT: Wear rubber gloves when cleaning for prolonged periods. Refer to the bleach manufacturer’s instructions for proper use.

NON-USE AND VACATION CARE

REINSTALLING/USING WASHER AGAIN

Operate your washer only when you are home. If moving, or not using your washer for a period of time, follow these steps:

1. Unplug or disconnect power to washer.

2. Turn off water supply to washer to avoid ooding due

to water pressure surges.

WINTER STORAGE CARE

IMPORTANT: To avoid damage, install and store washer

where it will not freeze. Because some water may stay in hoses, freezing can damage washer. If storing or moving during freezing weather, winterize your washer.

To winterize washer:

1. Shut off both water faucets, disconnect and drain water

inlet hoses.

2. Put 1 qt. (1 L) of R.V.-type antifreeze in basket and run

washer on RINSE AND SPIN cycle for about 30 seconds to mix antifreeze and remaining water.

3. Unplug washer or disconnect power. IMPORTANT: To reduce risk of hose failure, replace inlet

hoses every ve years and periodically inspect for kinks, cuts, wear or water leaks.

HELPFUL TIP: When replacing your inlet hoses, mark replacement date on label with a permanent marker.

To reinstall washer after non-use, vacation, winter storage, or moving:

1.Refer to Installation Instructions to locate, level, and

connect washer.

2.Before using again, run washer through the following

recommended procedure:

To use washer again:

1.Flush water pipes and hoses. Reconnect water inlet

hoses. Turn on both water faucets.

TRANSPORTING YOUR WASHER

1. Shut off both water faucets. Disconnect and drain water

inlet hoses.

2. If washer will be moved during freezing weather, follow

WINTER STORAGE CARE directions before moving.

3. Disconnect drain hose from drain system and from back

of washer.

4. Unplug power cord.

5. Place inlet hoses and drain hose inside washer basket.

6. Bundle power cord with a rubber band or cable tie to

keep it from hanging onto the ground.

IMPORTANT: Call for service to install new transport bolts. Do not reuse transport bolts. Washer must be transported in the upright position. To avoid structural damage to your washer, it must be properly set up for relocation by a certied technician.

2.Plug in washer or reconnect power.

3.Run washer through BULKY ITEMS cycle to clean

washer and remove antifreeze, if used. Use only HE detergent. Use half the manufacturer’s recommended amount for a medium-size load.

+ 33 hidden pages