Whirlpool WFW9470WW01, WFW9470WW00, WFW9470WR00, WFW9470WL01, WFW9470WL00 Owner’s Manual

FRONT.LOADING

AUTOMATICWASHER

For questions about features, operation/performance,

parts, accessories, or service call: 1-800-253-1301

In Canada, call: 1-800-807-6777

www.whirlpool.com or www.whirlpool.ca

or visit our website at

LAVEUSE

AUTOMATIQUEA

CHARGEMENTFRONTAL

461970255051

Certified to Sanitize Certifi6 pour aseptiser

Au Canada, pour assistance, installation ou service, composez le :

Table of Contents/Table des matieres .................. 2

Para obtener acceso al manual de use y cuidado en espa5ol, o para

obtener informaci6n adicional acerca de su producto, visite:

Designed to use only HE High Efficiency Detergent Congue pour I'utilisation d'un d6tergent haute efficacit6

seulement

1-800-807-6777

ou visitez notre site Internet &

www.whirlpool.ca

www.whirlpool.com.

TABLEOFCONTENTS

WASHER SAFETY ....................................................................................... 2

INSTALLATION REQUIREMENTS ............................................................. 3

Tools and Parts ......................................................................................... 3

Options ...................................................................................................... 4

Location Requirements ............................................................................. 4

Drain System ............................................................................................. 6

Electrical Requirements ............................................................................ 6

INSTALLATION INSTRUCTIONS ............................................................... 7

Remove Transport System ....................................................................... 7

Connect the Inlet Hoses ........................................................................... 7

Connect the Drain Hose ........................................................................... 8

Secure the Drain Hose .............................................................................. 8

Level the Washer ...................................................................................... 8

Complete Installation ................................................................................ 9

FEATURES AND BENEFITS ....................................................................... 9

WASHER USE ............................................................................................ 10

Starting Your Washer .............................................................................. 10

Using the Proper Detergent .................................................................... 10

Using the Dispenser ................................................................................ 11

Pausing or Restarting ............................................................................. 12

Changing Cycles, Options, and Modifiers .............................................. 12

Status Lights ........................................................................................... 13

Cycles ..................................................................................................... 13

Normal Washer Sounds .......................................................................... 15

Options .................................................................................................... 15

Modifiers ................................................................................................. 16

Laundry Guide ........................................................................................ 17

LAUNDRY TIPS .......................................................................................... 18

Loading ................................................................................................... 18

WASHER CARE ......................................................................................... 19

Cleaning Your Washer ............................................................................ 19

Water Inlet Hoses .................................................................................... 19

Vacation, Storage, and Moving Care ..................................................... 20

TROUBLESHOOTING ............................................................................... 20

ASSISTANCE OR SERVICE ...................................................................... 22

In the U.S.A ............................................................................................. 22

In Canada ................................................................................................ 22

Accessories ............................................................................................. 22

WARRANTY ............................................................................................... 23

TABLEDESMATIERES

SI!:CURITI!: DE LA LAVEUSE .................................................................... 24

EXIGENCES D'INSTALLATION ................................................................ 25

Outillage et pieces .................................................................................. 25

Options ................................................................................................... 25

Exigences d'emplacement ..................................................................... 26

Systeme de vidange ............................................................................... 27

Sp6cifications 61ectriques ....................................................................... 28

INSTRUCTIONS B'INSTALLATION ......................................................... 29

I_limination des accessoires de transport .............................................. 29

Raccordement des tuyaux d'alimentation ............................................. 29

Connect the Drain Hose ......................................................................... 30

Immobilisation du tuyau de vidange ...................................................... 30

R_glage de I'aplomb de la laveuse ........................................................ 31

Achever I'installation ............................................................................... 31

CARACTC:RISTIQUES ET AVANTAGES .................................................. 31

UTILISATION DE LA LAVEUSE ................................................................ 32

Mise en marche de la laveuse ................................................................ 33

Utilisation du d6tergent appropri6 .......................................................... 33

Utilisation du distributeur ........................................................................ 34

Pause ou remise en marche ................................................................... 35

Changement des programmes, options et modificateurs ..................... 35

T6moins lumineux ................................................................................... 36

Programmes ........................................................................................... 36

Sons normaux 6mis par la laveuse ........................................................ 38

Options ................................................................................................... 38

Modificateurs .......................................................................................... 39

Guide de lessivage ................................................................................. 40

CONSEILS BE LESSIVAGE ...................................................................... 41

Chargement ............................................................................................ 41

ENTRETIEN DE LA LAVEUSE .................................................................. 41

Nettoyage de la laveuse ......................................................................... 41

Tuyaux d'arriv6e d'eau ........................................................................... 42

Precautions _ prendre avant les vacances,

un entreposage ou un d6m6nagement .................................................. 43

DEPANNAGE ............................................................................................. 43

ASSISTANCE OU SERVICE ...................................................................... 46

Aux €:tats-Unis ........................................................................................ 46

Au Canada .............................................................................................. 46

Accessoires ............................................................................................. 47

GARANTIE .................................................................................................. 47

WASHER SAFETY

Your safety and the safety of others are very important.

We have provided many important safety messages in this manual and on your appliance. Always read and obey all safety messages.

This is the safety alert symbol. This symbol alerts you to potential hazards that can kill or hurt you and others.

All safety messages will follow the safety alert symbol and either the word "DANGER" or "WARNING." These words mean:

You can be killed or seriously injured if you don't immediately_ follow instructions.

You can be killed or seriously injured if you don't follow

instructions.

All safety messages will tell you what the potential hazard is, tell you how to reduce the chance of injury, and tell you what can happen if the instructions are not followed.

iMPORTANT SAFETY iNSTRUCTiONS

WARNING: To reduce the risk of fire, electric shock, or injury to persons when using the washer, follow basic precautions,

including the following:

[] Read all instructions before using the washer. [] Do not wash articles that have been previously cleaned

in, washed in, soaked in, or spotted with gasoline, dry=cleaning solvents, other flammable, or explosive

substances as they give off vapors that could ignite or explode.

[] Do not add gasoline, dry=cleaning solvents, or other

flammable, or explosive substances to the wash water. These substances give off vapors that could ignite or

explode.

[] Under certain conditions, hydrogen gas may be

produced in a hot water system that has not been used for 2 weeks or more. HYDROGEN GAS IS

EXPLOSIVE. If the hot water system has not been used for such a period, before using the washing

machine, turn on all hot water faucets and let the water flow from each for several minutes. This will release

any accumulated hydrogen gas. As the gas is flammable, do not smoke or use an open flame during

this time.

State of California Proposition 65 Warnings: WARNING: This product contains a chemical known to the State of California to cause cancer. WARNING: This product contains a chemical known to the State of California to cause birth defects or other reproductive harm.

SAVE THESE INSTRUCTIONS

Do not allow children to play on or in the washer. Close supervision of children is necessary when the washer is used

near children.

Before the washer is removed from service or discarded,

remove the door or lid.

[] Do not reach into the washer if the drum, tub or agitator is

moving.

[] Do not install or store the washer where it will be exposed to

the weather.

[] Do not tamper with controls. [] Do not repair or replace any part of the washer or attempt any

servicing unless specifically recommended in this manual or in

published user-repair instructions that you understand and have the skills to carry out.

[] See "Electrical Requirements" for grounding instructions.

INSTALLATIONREQUIREMENTS

Gather the required tools and parts before starting installation. The parts supplied are in the washer drum.

Tools needed for connecting the water inlet hoses

• Pliers (that open to 1 9/_6"[39.5 mm])

• Flashlight (optional) Tools needed for connecting the drain hose

• Locking pliers (that open to 19/_6"[39.5 mm]) Tools needed for installation

• Open end wrenches 17 mm and 13 mm

• Level

• Wood block

• Ruler or measuring tape NOTE: Replace inlet hoses after 5 years of use to reduce the risk

of hose failure. Record hose installation or replacement dates for future reference.

Parts supplied:

A. Drain hose form B. Inlet hose (2)

C. Inlet hose washer (4) D. Transport bolt hole plug (4)

E.Beaded strap E Drain hose

G.Hose clamp

Alternate Parts

Your installation may require additional parts. If you are interested in purchasing one of the items listed here, call the toll-free number

on the cover or in the "Assistance or Service" section.

If You Have You Will Need to Buy

Laundry tub or Sump pump system (if not already standpipe taller available) than 96" (2.4 m)

Overhead sewer Standard 20 gal. (76 L), 30" (762 mm) tall

drain tub or utility sink and sump pump (available from local plumbing suppliers)

Pedestal Color Part Number Height

15.5" (394 ram) NewAspen (Light Green) XHP1550VA

15.5" (394 ram) Tuscan Chestnut XHP1550VC

15.5" (394 ram) Ocean Blue XHP1550VE

15.5" (394 ram) Cranberry Red XHP1550WR

15.5" (394 ram) Lunar Silver XHP1550WL

Stack Kit

Floor drain Siphon break, Part Number 285834;

additional drain hose Part Number 8318155; and connector kit, Part

Number 285835

Drain hose too 4 ft (1.2 m) drain hose extension kit, short Part Number 285863

Water faucets 2 longer water fill hoses: 6 ft (1.8 m) beyond reach of fill Part Number 76314, 10 ft (3.0 m)

hoses Part Number 350008

Pedestal

You have the option of purchasing pedestals of different heights separately for this washer. You may select a 10" (254 mm) or a

15.5" (394 mm) pedestal. These pedestals will add to the total height of the washer for a total height of approximately 48" (1219 mm) or 53.5" (1359 mm).

Are you planning to stack your washer and dryer? To do so you will need to purchase a Stack Kit.

To order, call the dealer from whom you purchased your dryer or refer to the "Assistance or Service" section. Ask for Part

Number 8541503.

Selecting the proper location for your washer improves performance and minimizes noise and possible washer "walk."

Your washer can be installed under a custom counter, or in a basement, laundry room, closet, or recessed area. See "Drain System."

Companion appliance location requirements should also be considered. Proper installation is your responsibility.

You will need

• A water heater set to deliver 120°F (49°C) water to the washer. A grounded electrical outlet located within 6 ft (1.8 m) of

where the power cord isattached to the back of the washer. See "Electrical Requirements."

Hot and cold water faucets located within 4 ft (1.2 m) of the hot and cold water fill valves, and water pressure of 20-100 psi (137.9-689.6 kPa).

A level floor with a maximum slope of 1" (25 mm) under entire washer. Installing the washer on soft floor surfaces, such as

carpets or surfaces with foam backing, is not recommended. A sturdy and solid floor to support the washer with a total

weight (water and load) of 400 Ibs (180 kg).

Do not operate your washer in temperatures below 32°F (0°C). Some water can remain in the washer and can cause damage in low temperatures.

A B

A. 10" (254 ram) pedestal B. 15.5" (394 ram) pedestal

Toorder, call the dealer from whom you purchased your washer or refer to the "Assistance or Service" section.

Pedestal Color Part Number Height

10" (254 mm) White WHP1000SQ 10" (254 ram) Black WHP1000SB 10" (254 ram) Diamond Dust (Silver) WHPIOOOSU

15.5" (394 ram) White XHP1550VW

15.5" (394 ram) Black XHP1550VB

15.5" (394 ram) Diamond Dust (Silver) XHP1550VU

Installation clearances

• The location must be large enough to allow the washer door to be fully opened.

Additional spacing should be considered for ease of installation and servicing.

Additional clearances might be required for wall, door, and floor moldings.

Additional spacing of 1" (25 mm) on all sides of the washer is recommended to reduce noise transfer.

Companion appliance spacing should also be considered.

WasherDimensions

521/2"

_(1335m

Recommended installation spacing for recessed or closet installation, with stacked washer and dryer

The dimensions shown are for the recommended spacing.

48 in.2 *

(310cm2}

3"* (76 ram)

Recommended installation spacing for custom undercounter installation

The dimensions shown are for the recommended spacing. Custom undercounter installation - Washer only

(99o_m)

-- i" 27

(25ram) (888ram) (25ram)

Recommended installation spacing for recessed or closet installation, with or without a pedestal

The dimensions shown are for the recommended spacing.

Recessed area or closet installation

34" rain.

(864ram}

24in?t-_

(155cra2}

1"_=4_-31WL_,,44"

(25ram)

(800mm)(102ram)

A. Side view - closet or confined area B. Closet door with vents

._(78ram)

2[_

j_ 3"* (76mm)

24 in. 2 *

(155cm_)

*Required spacing

6"* (_52 mm)

( 976

51/2,,**--_

(140mm)

*Required spacing

**For venting out the side, 1" (25 mm) spacing is allowed.

Recommended installation spacing for cabinet installation

• The dimensions shown are for the recommended spacing.

• For cabinet installation, with a door, the minimum ventilation openings in the top are required.

--)I P_--

1" _ _- 27"-_

(25 ram) (686 ram)

7 _j

(178ram)

1"* (25mm)

1'1

(25ram)

*Min. top and bottom air openings for closet door.

Recessed or closet installation - Washer on pedestal

-- 18" mirL

_ (457re.m}

I"--_4 I'_--27"---_II_-----

(25ram)

{686ram) (25rara) (800mm) (102mm}

A. Recessed area B. Side view - closet or confined area

1"----_ 1"_-311/2"'-_44

(102ram) (800ram)

I!m

-_ 9" (229ram)

(25ram} (686mm) (25mra)

Thewashercanbeinstalledusingthestandpipedrainsystem (floororwall),thelaundrytubdrainsystem,orthefloordrain system.Selectthedrainhoseinstallationmethodyouneed.See "ToolsandParts."

Standpipe drain system - wall or floor (views A & B)

The standpipe drain requires a minimum diameter standpipe of 2" (50 mm). The minimum carry-away capacity can be no less than 17 gal. (64 L) per minute.

The top of the standpipe must be at least 30" (762 mm) high and no higher than 96" (2.4 m) from the bottom of the washer.

30" rnin.

(762irn}

Electrical Shock Hazard

Plug into a grounded 3 prong outlet. Do not remove ground prong. Do not use an adapter.

Do not use an extension cord.

Failure to follow these instructions can result in death,

fire, or electrical shock.

Laundry tub drain system (view C) The laundry tub needs a minimum 20 gal. (76 L) capacity. The top

of the laundry tub must be at least 30" (762 mm) above the floor.

Floor drain system (view D)

The floor drain system requires a siphon break that may be purchased separately. See "Tools and Parts."

The siphon break must be a minimum of 28" (710 mm) from the bottom of the washer. Additional hoses might be needed.

C D

A 120 volt, 60 Hz., AC only, 15- or 20-amp, fused electrical supply is required. A time-delay fuse or circuit breaker is recommended. It is recommended that a separate circuit serving only this appliance be provided.

This washer is equipped with a power supply cord having a 3 prong ground plug.

To minimize possible shock hazard, the cord must be plugged into a mating, 3 prong, ground-type outlet, grounded in

accordance with local codes and ordinances. If a mating outlet is not available, it is the personal responsibility and obligation of the customer to have the properly grounded outlet installed by a qualified electrician.

If codes permit and a separate ground wire is used, it is recommended that a qualified electrician determine that the ground path is adequate.

Do not ground to a gas pipe. Check with a qualified electrician if you are not sure the

washer is properly grounded.

• Do not have a fuse in the neutral or ground circuit. 2.

GROUNDING iNSTRUCTiONS

For a grounded, cord-connected washer:

This washer must be grounded, in the event of a malfunction or breakdown, grounding will reduce the risk of electrical

shock by providing a path of least resistance for electric current. This washer is equipped with a cord having an equipment-grounding conductor and a grounding plug. The plug must be plugged intoan appropriate outlet that is

properly installed and grounded in accordance with all local codes and ordinances.

WARNING: Improper connection of the equipment-

grounding conductor can result in a risk of electric shock. Check with a qualified electrician or serviceman if you are in doubt as to whether the appliance is properly grounded.

Do not modify the plug provided with the appliance - if itwill not fit the outlet, have a proper outlet installed by a qualified

electrician. For a permanently connected washer:

This washer must be connected to a grounded metal, permanent wiring system, or an equipment grounding

conductor must be run with the circuit conductors and connected to the equipment=grounding terminal or lead on

the appliance.

Once the bolt is loose, move it to the center of the hole and completely pull out the bolt, including the plastic spacer

covering the bolt.

3. Once all 4 bolts are removed discard bolt and spacers. Then pull the power cord through the opening of the rear panel and

close the hole with the attached cap.

4. Close the bolt holes with the 4 transport bolt hole plugs.

NOTE: If the washer is to be transported at a later date, call your local service center. To avoid suspension and structural damage

to your washer, it must be properly set up for relocation by a certified technician.

Insert new flat washers (supplied) into each end of the inlet hoses. Firmly seat the washers in the couplings.

A B

INSTALLATIONINSTRUCTIONS

Excessive Weight Hazard

Use two or more people to move and install washer.

Failure to do so can result in back or other injury.

IMPORTANT: Position the washer so that the rear of the washer is within approximately 3 ft (900 mm) of its final location.

There are 4 bolts in the rear panel of the washer that support the suspension system during transportation. These bolts also retain

the power cord inside the washer until the bolts are removed.

! R_

1. Using a 13 mm wrench, loosen each of the bolts.

A. Coupling B. Washer

Make sure the washer drum isempty.

Attach the hose with the red color indicator to the Hot (left) inlet valve. Attaching the red coupling first makes it easier to tighten connection with pliers. Screw on coupling by hand until it is seated on the washer.

Attach the hose with the blue color indicator to the Cold (right) water inlet valve. Screw on coupling by hand until it is seated

on the washer.

H. Hot water inlet C. Cold water inlet

5. Using pliers, check the tightness of the hose couplings already attached to the washer.

NOTE: Do not overtighten. Damage to the coupling can result.

6. Attach hot water hose to the hot water faucet. Screw on coupling by hand until it is seated on the washer.

7. Attach cold water hose to the cold water faucet. Screw on coupling by hand until it is seated on the washer.

8. Usingpliers,tightenthecouplingswithanadditional two-thirdsturn.

NOTE: Do not overtighten. Damage to the coupling can result.

9. Turn on the water faucets and check for leaks. NOTE: Replace inlet hoses after 5 years of use to reduce the

risk of hose failure. Record hose installation or replacement dates on the hoses for future reference.

Periodically inspect and replace hoses if bulges, kinks, cuts, wear, or leaks are found.

Laundry tub drain or standpipe drain Connect the drain hose form to the corrugated drain hose.

A B

A. Snap either end of the drain hose form to the drain hose at

the point where the corrugation begins.

B. Bend drain hose over drain hose form and snap into place.

_,_ _,_ _ ,_ _ _/_ _ -_'_-_,_ _ _3 ¸ _+,s_

Remove drain hose from washer drum

1. Use locking pliers, squeeze hose clamp tabs together and insert over the end of drain hose.

2. Slide drain hose onto washer connection.

Once drain hose is in place, release pliers.

To keep drain water from going back into the washer:

• Do not straighten the drain hose, and do not force excess drain hose into standpipe. Hose should be secure, but loose

enough to provide a gap for air.

• Do not lay excess hose on the bottom of the laundry tub.

Floor drain

You may need additional parts. See Floor drain under "Tools and Parts."

Drape the power cord over the washer top.

Secure the drain hose to the laundry tub leg or standpipe with the beaded strap provided. (See illustrations A and B.)

A B C

If the washer faucets and the drain standpipe are recessed (see illustration C), put the hooked end of the drain hose in the standpipe. Tightly wrap the beaded strap around the water

inlet hoses and the drain hose.

Do not force excess drain hose into the standpipe.

Washer drain system can be installed using afloor drain, wall standpipe, floor standpipe, or laundry tub.

Properly leveling your washer avoids excessive noise and vibration.

1. Check the levelness of the washer by placing a level on the top edge of the washer, first side to side, then front to back.

If the washer is against a wall, move the washer out slightly before tipping back. If the washer is not level, first prop the front with a wood block and adjust the feet as necessary; then

prop the back and adjust feet as necessary. Repeat this step until washer is level.

Make sure all four feet are stable and resting on the floor. Then check that the washer is perfectly level (use a level).

After the washer is level, use a 17 mm open-end wrench to turn the nuts on the feet tightly against the washer cabinet.

IMPORTANT: All four feet must be tightened. If the nuts are not tight against the washer cabinet, the washer may vibrate.

The washer should not move front to back, side to side, or diagonally when pushed on its top edges.

Slide the washer to its final location.

Confirm the levelness of the washer.

1. Check the electrical requirements. Be sure that you have the correct electrical supply and the recommended grounding

method. See "Electrical Requirements."

2. Check that all parts are now installed. If there is an extra part, go back through the steps to see which step was skipped.

3. Check that you have all of your tools.

4. Dispose of/recycle all packaging materials.

5. Check that the water faucets are on.

6. Check for leaks around faucets and inlet hoses.

Electrical Shock Hazard

Plug into a grounded 3 prong outlet. Do not remove ground prong. Do not use an adapter.

Do not use an extension cord.

Failure to follow these instructions can result in death,

fire, or electrical shock.

Plug into a grounded 3 prong outlet.

Read "Washer Use."

To test and clean your machine, make sure there are no clothes in the washer and add one AFFRESWe tablet to the

washer drum. Select Power, the Clean Washer cycle and then select START.This cycle will take approximately 50 minutes to

complete. Allow the washer to complete the entire cycle without interruption.

FEATURESANDBENEFITS

Electronic Controls

Flexible electronic controls are easy to use whether you are a beginner or an expert.

Smart Dispensers

The Smart Dispensers make your washer truly automatic. This washer provides a three-compartment dispenser which includes

separate compartments for main wash detergent, fabric softener, and bleach. The dispenser has large pour zones. The dispenser is self-cleaning, and can be easily removed. Laundry products are

diluted with fresh water and added to the load at the proper time in the wash cycle.

Clean Washer with AFFRESH TM Cycle

This cycle uses steam to raise the temperature of the unit and makes the washer self-cleaning, flushing the machine's interior

free of dirt and other residue. The use of AFFRESH _ewasher cleaner or liquid chlorine bleach with this cycle will remove and

help avoid odor-causing residue.

Auto Water Level

This washer automatically adjusts water level for optimal cleaning and rinsing performance. Two sensors determine load size, load

composition, and suds level, then the sensors adjust the water level to the proper setting. This eliminates guesswork. The water level is just right for every wash load size.

Larger Load Size Since there isno agitator, you can wash larger, bulkier items such

as a king-sized bedspread. You are also able to wash more clothes at one time, which means fewer loads.

Stainless Steel Drum

The stainless steel drum eliminates corrosion and enables higher spin speeds for more water extraction, helping to reduce drying time compared to traditional top-load washers.

High-Efficiency Wash System

Your new front-loading, high-efficiency washer saves time with fewer, larger loads. It also lowers your water and energy bills by helping conserve resources.

Spin Speeds

This washer automatically selects the spin speed based on the cycle selected. This factory setting can be changed, however. This washer offers up to four different spin speed choices, up to 1300

rpm.

Heating Element

This washer has a heating element that automatically heats the water to the optimal temperature on select cycles. This enables stepped cleaning, a process in which warm water is brought in and mixed with detergent first, then the water is heated. Stepped

cleaning starts the wash cycle with warm water to remove stains (such as blood and grass).

6th Sense _ Technology Intuitive intelligence "knows every load" determining load sizes,

water levels and how much cleaning time is needed.

sense TM

Direct Injection Wash System

This washer channels 100% of the water through the dispensers to assure thorough rinse-out and mixture of all the laundry

products before they touch any garments. The water is then sprayed from the top front onto the center of the load, providing even distribution and optimum cleaning performance. It is normal

for small amounts of water to remain in the dispensers when the wash cycle is complete.

Add a Garment

Clothes can be added to the load during the first 8 minutes of the cycle. During this time, the Add a Garment Status Indicator will

indicate it is okay to add clothes.

Efficient Detergent System with Anti-Escape Valve

This washer has a specially designed valve that closes during the wash portion of the cycle so that 100% of the water and detergent

mixture is used on the load. The Efficient Detergent System ensures that no water or detergent is wasted.

6-Point Suspension System

Shock absorbers, 2 springs and electronic controls are specially designed to help redistribute the load automatically and minimize movement of the wash drum during the spin cycle. The 6-Point Suspension System reduces the amount of force transmitted to

the floor by the washer, resulting in reduced noise, and vibration.

WASHERUSE

NOTE: The panel shown above may be different from that of your model.

DelayWasl_

,f'%

• II0t • Me_m • Heavy • loud !x

• Wam • _a_e • N0_mal • Soft

Cold _ s_in ol't Of_ _I

00ooo

iSOlll Cyde _ls_

i.....

Fire Hazard

Never place items in the washer that are dampened

with gasoline or other flammable fluids.

No washer can complete|y remove oil. Do not dry anything that has ever had any type of oil on

it (including cooking oils). Doing so can result in death, explosion, or fire.

WARNING: To reduce the risk of fire, electric shock, or injuryto persons, read the IMPORTANT SAFETY INSTRUCTIONS before

operating this appliance. The following is a guide to using your washer. Please refer to

specific sections of this manual for more detailed information. Do not store laundry products on the top surface of this washer.

Vibration is normal during operation.

Use only High Efficiency detergents. The package for this type of detergent will be marked "HE" or "High Efficiency." This wash system, along with less water, will create too much sudsing with a regular non-HE detergent. Using regular detergent will likely result

in washer errors, longer cycle times, and reduced rinsing performance. It may also result in component failures and noticeable mold or mildew. HE detergents are made to produce

the right amount of suds for the best performance. Follow the manufacturer's instructions to determine the amount of detergent to use. Remember, concentrated detergents such as 2x or higher will use less detergent based on load size.

Use only HE High Efficiency detergent.

First Wash Cycle Without Laundry

Before washing clothes for the first time, if not completed during the final installation step, choose the Normal/Casual cycle and run it without clothes. Use only HE High Efficiency detergent. Use V; the manufacturer's recommended amount for a medium-size

load. This initial cycle serves to ensure the interior is clean before washing clothes.

For All Wash Cycles

Open the washer door by pulling on the handle. Sort laundry according to color and type of fabric. Place a load of sorted clothes in the washer. Do not overload washer. Overloading can cause poor cleaning.

• The washer can be fully loaded, but not tightly packed. Washer door should close easily.

• Mix large and small items and avoid washing single items.

Load evenly.

Wash small items, such as infant socks, in mesh garment

bags. It is recommended that more than one garment bag be used, and that each garment bag be filled with equal

amounts of material.

• Whenunloadinggarments,checkunderthegraycolored sealatthefrontofthetubforsmallitems.

2. Closethewasherdoorbypushingitfirmlyuntilthelockclicks. Thewasherdoorwillremainlockedduringthewashcycle.

NOTES:

After any wash cycle is completed, the door must be opened and then closed before a new cycle can begin.

The door can be opened only if PAUSE/CANCEL is selected while the Add A Garment light is glowing or if the cycle has been canceled.

See "To cancel a cycle" in "Changing, Cycles, Options, and Modifiers" section.

3. Open the dispenser drawer and add laundry products to the detergent, bleach, or fabric softener compartments. Close

drawer slowly to avoid spills. See "Using the Dispenser."

4. Turn on the washer by selecting POWER. Select one of the cycles by turning the cycle selector. The indicator light for the selected cycle will glow green. When selecting a wash cycle,

the preset options and modifiers (such as Water Temp, Spin Speed, Soil Level, and Rinse) for the selected cycle will glow green. Selectable options will glow amber. If an option or modifier is unavailable with a selected cycle, the light will not

illuminate. The display shows the estimated time remaining. The preset settings provide the recommended fabric care for the selected cycle. See "Cycles."

5. Select the desired Options. Not all options are available with all cycles. See "Options."

6. Select the desired modifiers such as Water Temp, Spin Speed, Soil Level, and Rinse. Not all modifiers are available with all cycles and options. See "Modifiers."

7. If desired, select the CYCLE SIGNAL. The signal is helpful when you are washing items that should be removed from the

washer as soon as it stops. Select Loud, Soft, or Off.

8. If desired, select the BUTTON SOUND. This feature makes a sound each time a button is pressed. Select Loud, Soft, or Off.

9. Select and hold START for approximately 1 second.

• If you do not select START within 5 minutes of choosing a

cycle, the washer automatically shuts off. When the wash cycle is complete, the DONE status light

glows, the door unlocks, and the wash load can be removed from the washer. The washer powers down automatically 60 minutes after the cycle is complete and the DONE light goes off. To power down the washer manually after the wash cycle is complete, select PAUSE/

CANCEL once.

10. To use the same cycle again, press POWER first, then select START.

11. To begin the wash cycle later Select DELAY WASH until the desired delay time (in hours)

shows in the Estimated Time Remaining display. Select START.The countdown to the wash cycle will show inthe

display window. IMPORTANT: When delaying a cycle, use only powdered

detergents in the main wash compartment since liquid detergents may seep out of the compartment during Delay

Wash, before the wash cycle begins.

Your new washer has a dispenser drawer with three separate compartments for your laundry products--one is for detergent, one is for liquid chlorine bleach, and one is for liquid fabric

softener. Laundry products are diluted and dispensed automatically at the proper time during the wash cycle, making it unnecessary for you to return to the washer during the cycle to

add them. It is normal for small amounts of water to remain in the dispensers

when the wash cycle is complete. Do not put laundry products directly into the wash tub. Always

use the proper dispensers when adding laundry products.

Choosing the Right Detergent

in washer errors, longer cycle times, and reduced rinsing performance. It may also result in component failures and noticeable mold or mildew. HE detergents are made to produce

Use only HE High Efficiency detergent.

Tofill dispenser compartments

Pull out the dispenser drawer.

Add the desired laundry product to the proper compartment.

Push in the dispenser drawer slowly and completely (to avoid a spill).

t____ L2_/_ ......................................................C

,, .........................................................................

B ............................................................................................................................................................................................E

Dispenser

A.Detergent type selector B.Main Washdetergent compartment

C.Dispenser releaselever D.Chlorine bleach compartment

E.Fabric softener compartment

MainWashdetergentcompartment

(Letter B in Dispenser Illustration) Add liquid or powdered HE detergent to this compartment for

your main wash cycle. The detergent type selector (A) must always be inthe correct position for the detergent type used. Slide the detergent type selector to the correct position.

IMPORTANT: If you are using the Delay Wash option, powdered detergent must be used in the Main Wash compartment, since liquid detergents may seep out of the Main Wash compartment before the main wash begins.

• Use the detergent manufacturer's recommended amount for load size.

• Liquid or powdered color-safe bleach may be added to the Main Wash compartment along with the same type of detergent, liquid or powdered.

• Liquid detergent:

A ..............

Selector in position for liquid detergent

A. Detergent typeselector

Powdered detergent:

Fabric softener compartment (Letter E in Dispenser Illustration)

Pour measured liquid fabric softener into the fabric softener dispenser, if desired.

IMPORTANT: Dilute all fabric softener with water for a total of 1/4cup (60 mL).

• Do not overfill. The dispenser holds 1/4cup (60 mL).

• Do not spill or drip any fabric softener onto the clothes. NOTES:

• Use only liquid fabric softener in this dispenser.

• Do not use fabric softener dispensing balls in this washer. Dispensing balls will not operate correctly with this washer.

To pause the washer at any time, press PAUSEICANCEL.

To continue the cycle, press START (for approximately 1 second).

Not all Options and Modifiers are available with all cycles. Available modifiers will glow amber. If anOption or Modifier is

unavailable with a selected cycle, the light will not illuminate. Cycles, Options, and Modifiers can be changed anytime before

START is selected. Options and Modifiers can be changed anytime after START is

selected and before the start of the selected Option or Modifier.

To cancel a cycle and select a new cycle

1. Press PAUSE/CANCEL twice.

2. Press POWER.

3. Select desired cycle.

4. Select the desired Options or Modifiers such as Water Temp, Spin Speed, and Soil Level.

5. Press START (for approximately 1 second) to restart the washer at the beginning of the new cycle.

Selectorin position for powdered detergent

A.Detergent type selector

Chlorine bleach compartment (Letter D in Dispenser Illustration) Add no more than 2/3cup (160 mL) liquid chlorine bleach to this

compartment. The bleach will be automatically diluted and dispensed at the optimum time during the first rinse after the wash

cycle. This compartment cannot dilute powdered bleach.

• Always measure liquid chlorine bleach. Use a measuring cup with a pour spout; do not guess.

• Do not fill beyond the "MAX" level. NOTE: Overfilling could cause garment damage.

At the end of the cycle, a small amount of water may be left in the dispenser. This is normal.

To cancel a cycle

1. Press PAUSE/CANCEL twice.

2. The washer powers down, the door unlocks, and clothes can be removed.

NOTE: If the water level or the temperature is too high, the washer will drain automatically before the door unlocks.

To change Options or Modifiers after the cycle has started

Press PAUSE/CANCEL once.1=

Select the desired Options or Modifiers such as Water Temp, Spin Speed, and Soil Level. Available selections will glow

amber.

Press START (for approximately 1 second) to continue the cycle.

To drain the washer manually

1. Press PAUSE/CANCEL twice.

2. Press POWER.

3. Select DRAIN/SPIN.

4. Press START (for approximately 1 second) to begin the drain.

5. When the spin is complete, the door unlocks. Items can be removed from the washer.

Sensing/Revising Estimated Time

These lights show which portion of the cycle the washer is operating. They also indicate when you can add an additional item to the wash cycle and when the controls are locked.

EstimatedTimeRemaining

Done

The Done status light stays on for 60 minutes after the cycle is complete, and then the washer shuts off.

Controls Lock/Unlock

The Controls Lock avoids unintended use of the washer. You can also use the control lock feature to avoid unintended cycle or

option changes during a cycle. When Controls Lock is lit, all buttons are disabled except for Pause/Cancel and Start. You can

lock the controls while the washer is operating.

To lock the controls

Press and hold CONTROLS LOCK/UNLOCK for 3 seconds.

ControlsL0ck/Unl0ck

Hold{0r3Seconds

The status light next to the CONTROLS LOCK/UNLOCK button will glow.

To unlock the controls

Press and hold CONTROLS LOCK/UNLOCK for 3 seconds until the status light turns off.

NOTE: To lock or unlock the controls when the washer is off, press and hold CONTROLS LOCK/UNLOCK for 3 seconds.

Door Locked

When the status light glows, the door is locked.

Add a garment

This washer allows an 8-minute period in which other garments may be added to the load. You can add items to the washer if the

status indicator shows Add a Garment.

To add items

1. Select Start/Pause once. The washer door unlocks and items can be added.

2. To continue the cycle, close the door and select Start/Pause (for approximately 1 second).

3. To unlock the door after the Add a Garment period, press Power/Cancel twice. This will cancel the Wash Cycle.

The cycle times vary automatically based on your water pressure, water temperature, detergent, and clothes load.

The washer will automatically sense the progress in the cycle and adjust the Estimated Time Remaining display. While the washer is

sensing, the estimated time will flash and the Sensing Status Light will glow. When the sensing is complete, the flashing stops, the status light goes off and the Estimated Time Remaining display is

updated. The cycle time will be extended if oversudsing occurs or the load

is unbalanced. The SUD routine removes extra suds and assures proper rinsing of your garments. See "Troubleshooting." During the unbalance routine the time displayed may pause until this

activity is complete, then resume with the remainder of the cycle.

Cycles can be selected by turning the Cycle Control knob to the desired cycle. Each cycle is designed for different types of fabric and soil levels. The Modifier Indicator Lights, on the right-hand

side of the panel, will change as cycles are selected.

NORMAL

HAND BULKYITEMS WASHABLES HEAVYDUTY

QUICKWASH WHITEST

was,CYCLES WHITES

CLEANWASHER SOAK

SANITARY

RINSE/SPIN

w,%m_

Each cycle has a preset Soil Level (estimated cycle time), Water Temperature, and Spin Speed, and may have preset options. The preset settings provide the recommended fabric

care for the selected cycle. The preset settings will glow green to show the preselected

Options and Modifiers, and be changed anytime before START is pressed. Not all Options and Modifiers are available

with all cycles. Available selections glow amber. (To change settings after the cycle has started, press PAUSE/CANCEL once, then select the desired settings. Press START to continue the cycle.)

Powdered detergents may not dissolve well in a slow-speed cycle. For best results, use liquid detergent in slow-speed cycles.

Preset cycle settings Each cycle has a preset Soil Level (cycle time), Water

Temperature, and Spin Speed. The preset settings provide the recommended fabric care for the selected cycle. See chart.

Cycle Soil Level Water Temp Spin

(cycle time) Speed

Sanitary Normal Super Hot/Cold High

(1:50)

Whitest Normal Hot/Cold High Whites (1:20)

Heavy Duty Heavy Warm/Cold High

(1:20)

Bulky Items Normal Warm/Cold High

(0:55)

Normal/ Normal Warm/Cold High Casual (0:50)

Cycle SoilLevel Water Temp Spin

(cycle time) Speed

Delicate Normal Warm/Cold Medium

(0:40)

Hand Normal Cold/Cold Low Washables (0:30)

Quick Wash Light Warm/Cold Extra High (2-3 Items) (0:18)

Clean N/A N/A High Washer (1:05)

With

AFFRESH TM

Soak Normal Warm/Cold No Spin

(0:30)

Rinse/Spin N/A Cold/Cold Extra High

(0:22)

Drain/Spin N/A N/A Extra High

(0:13)

To change the preset cycle settings Press the selector of each available setting until the desired

setting glows green.

Sanitary

Use this cycle to clean heavily soiled, colorfast fabrics. This cycle combines a super hot water temperature and fast tumbling to help

ensure the removal of heavy soils and stains. It is recommended that you set your hot water heater to 120 F(49 C)to ensure proper performance during this cycle.

Whitest Whites

This cycle is especially designed for cleaning loads of soiled white fabrics with the addition of bleach. Hot washing temperatures assure optimal bleach activity. An additional rinse provides optimal rinse performance to avoid chlorine residues on your

laundry. This cycle combines fast-speed tumbling, longer wash time, and high speed spin to shorten drying time.

Heavy Duty

Use this cycle to wash loads of sturdy, colorfast fabrics, and heavily soiled garments. This cycle combines fast-speed

tumbling, optimal wash time, and high speed spin to shorten drying times. If the water temperature is lower than needed for this cycle, the heater will warm the water to the optimum temperature.

Bulky Items

Use this cycle to wash large items such as blankets and comforters. This cycle starts with a soak to thoroughly saturate your large load. This is followed by medium wash action and low- spin speeds to maintain load balance.

Normal/Casual

Use this cycle to wash loads of no-iron fabrics, such as sport shirts, blouses, casual business clothes, permanent press blends, cottons and linens, and synthetic fabrics. This cycle combines medium-speed tumbling, high-speed spin, and a load cooling

process to reduce wrinkling. NOTE: For the best energy performance, use the Normal/Casual

Cycle.

Delicate

Use this cycle to clean hand washable and special-care garments. Similar to the way garments are hand washed in a sink, the wash

action of this cycle combines periods of low speed tumbling and soaking. CRADLE CLEAN TM motion offers gentle fabric care for effective cleaning of delicate and hand washable garments.

Medium speed spin helps reduce wrinkling.

• Use mesh garment bags to wash undergarments such as underwire bras, items with strings, and small items such as

infant socks.

Hand Washables

Use this cycle to clean hand washable and special-care garments. Similar to the way garments are hand washed in a sink, the wash action of this cycle combines periods of low speed tumbling and soaking. CRADLE CLEAN TM motion offers gentle fabric care for

effective cleaning of delicate and hand washable garments. Low speed spin helps reduce wrinkling.

Quick Wash

Use this cycle to wash small loads of 2-3 lightly soiled garments that are needed in a hurry. This cycle combines fast-speed

tumbling, a shortened wash time, and high speed spin to shorten drying time.

Clean Washer With AFFRESH TM cycle

Use the Clean Washer With AFFRESH TM cycle once a month to keep the inside of your washer fresh and clean. This cycle uses a

higher water level. Use with AFFRESH ° washer cleaner tablet or liquid chlorine bleach to thoroughly clean the inside of your washing machine. This cycle should not be interrupted. See

"Cleaning Your Washer" in the "Washer Care" section. IMPORTANT: Do not place garments or other items in the washer

during the Clean Washer cycle. Use this cycle with an empty wash drum.

Soak

Use the Soak cycle to help remove small spots of set-in stains on fabrics. This cycle provides a soak time with warm or cold water followed by drain. Extra water, a short tumbling phase for equal

distribution of the laundry, and a soaking time without drum movement improve the removal of set-in stains. Drain without spin assures gentle treatment, even for delicate articles.

Rinse/Spin

Use this cycle to get a rinse and spin only. This cycle combines fast-speed tumbling and High speed spin. If desired, you can reduce the spin speed by selecting the speed you want from the

SPIN SPEED modifier.

A Rinse/Spin cycle is useful for

• Loads that need rinsing only, like swimsuits. NOTE: For more delicate loads, when using a Rinse & Spin

cycle to rinse swimwear, change the Speed Spin Modifier setting to Medium or Low to avoid fabric stress.

• Adding fabric softener to a load.

Drain/Spin

Use this cycle to drain your washer or to drain and spin your wash load. The spin speed is preset to High. If desired, you can reduce

the spin speed by selecting the speed you want from the SPIN SPEED modifier.

NOTE: Loads of synthetics, delicate fabrics, hand washables, and woolens should be drained with no spin or low spin speed to

avoid fabric stress.

FanFresh TM option

As with any new product, you will hear sounds that you are not accustomed to. You may hear various sounds when the door is locked and unlocked, and during the washing, rinsing, and

spinning process. Between changes in wash actions, there will be momentary pauses. You will hear water spraying and splashing during the wash and rinse cycles. These new sounds and pauses

are part of normal washer operation.

You can customize your wash by adding options to your cycle selections. You can add or change an option after starting a cycle

anytime before the selected option begins. Not all options are available with all cycles. Available options will glow amber. Current selections will glow green. If an option is unavailable with a

selected cycle, the light will not illuminate.

DelayWash

0 DeepClean OPreSoak

©©

Soft

_O_/_L°ud

FanFresh

• See the "Laundry Guide" for an overview of possible options for each Wash Cycle selection.

You can select more than one option for a cycle. Some options cannot be added to some cycles. If an option is unavailable with a selected cycle, there will be 3 short tones, and the light for that option will not glow when selected.

Off

Cycle

Signal

_u_t0n Sound 0n/0f'

Hold for _Sec

Use this option when you are not able to unload your clothes, soon after the wash cycle ends. This option provides periodic

tumbling and airflow (aided by a quiet, ultra low energy fan) for up to 10 hours to help freshen your clothes. During this time, the "Done" indicator remains activated, the door remains locked, and

the FanFresh TM indicator light will flash. The FanFresh TM option will automatically stop and the door lock will be released after this time expires, or if you press cancel at anytime to unload your laundry.

Deep Clean

Use this option for heavily soiled loads that need improved stain treatment, loads with multiple types of stains, or loads you suspect as having stains, but are afraid may have been missed (no sorting or searching for stains). When Deep Clean is selected,

the water temperature of the selected wash cycle is automatically set to warm. The water will then be slowly heated to the temperature selected, to aid in stain removal. This option will provide optimal

removal of organic stains such as blood and grass.

Pre Soak

Use this option for loads of heavily soiled items that need pretreatment.

• Add detergent to Main Wash compartment of the dispenser drawer.

This option adds tumbling time prior to the selected main cycle. The washer continues automatically from presoak into the main

wash cycle.

Cycle Signal

Delay Wash

To begin the wash cycle later, select DELAY WASH until the desired delay time (in hours) shows in the Estimated Time

Remaining display, and then select START. The countdown to the wash cycle will show in the display window, and the button

indicator will blink until the cycle begins. IMPORTANT: When delaying a cycle, use only powdered

detergents inthe main wash compartment since liquid detergents may seep out of the compartment during Delay Wash, before the wash cycle begins.

This signal is helpful when you are removing items from the washer as soon as it stops. Press CYCLE SIGNAL to select Loud,

Soft, or Off. To activate/deactivate button sound hold cycle signal button for 3 seconds.

+ 33 hidden pages