Whirlpool WFW9400VE03, WFW9400VE02, WFW9400SZ04, WFW9400SZ03, WFW9400SZ02 Owner’s Manual

®

o|

®

\

FRONT.LOADING

AUTOMATICWASHER

For questions about features, operation/performance,

parts, accessories or service call: 1-800-253-1301

In Canada, call: 1-800-807-8777

www,whirlpool.com or www.whirlpool.ca

or visit our website at

LAVEUSE

AUTOMATIQUEA

CHARGEMENTFRONTAL

Au Canada, pour assistance, installation ou service, composez le :

Table of Contents/Table des matieres .................. 2

Para obtener acceso al manual de uso y cuidado en espa_ol, o
para obtener informaci6n adicional acerca de su producto, visite:

www.whirlpool.com.
Tenga listo su nOmero de modelo completo. Podrh encontrar el

nOmero de modelo y de serie en la etiqueta ubicada debajo de la

tapa de la lavadora.

1-800-807-6777

ou visitez notre site internet &

www,whirlpool.ca

Designed to use only HE
High Efficiency Detergent

Con_ue pour I'utilisation
d'un detergent haute

efficacite seulement

461970240842 / WlO158202B

TABLEOFCONTENTS

TABLEDESMATI] RES

WASHER SAFETY ......................................................................... 3

iNSTALLATiON REQUIREMENTS ................................................ 4

Tools and Parts ............................................................................ 4

Options ......................................................................................... 4

Location Requirements ................................................................ 5

Drain System ................................................................................ 6

Electrical Requirements ............................................................... 7

iNSTALLATiON iNSTRUCTiONS .................................................. 7

Remove Transport System .......................................................... 7

Connect the inlet Hoses ............................................................... 8

Route the Drain Hose ................................................................... 8

Secure the Drain Hose ................................................................. 9

Level the Washer .......................................................................... 9

Complete Installation ................................................................... 9

FEATURES AND BENEFITS ........................................................ 10

WASHER USE ............................................................................... 11

Starting Your Washer ................................................................. 11

Using the Proper Detergent ....................................................... 11

Using the Dispenser ................................................................... 12

Pausing or Restarting ................................................................. 13

Changing Cycles, Options, and Modifiers ................................. 13

Status Lights .............................................................................. 13

Cycles ......................................................................................... 14

Normal Washer Sounds ............................................................. 16

Options ....................................................................................... 16

Modifiers ..................................................................................... 17

Laundry Guide ............................................................................ 17

LAUNDRY TIPS ............................................................................ 18

Loading ....................................................................................... 18

WASHER CARE ............................................................................ 19

Cleaning Your Washer ............................................................... 19

Water inlet Hoses ....................................................................... 20

Vacation, Storage, and Moving Care ......................................... 20

TROUBLESHOOTING .................................................................. 21

ASSISTANCE OR SERVICE ......................................................... 24

in the U.S.A................................................................................ 24

in Canada ................................................................................... 24

Accessories ................................................................................ 24

WAR RANTY .................................................................................. 25

S_eCURITE DE LA LAVEUSE ........................................................ 26

EXIGENCES D'INSTALLATION ................................................... 27

Outillage et pieces ...................................................................... 27

Options ....................................................................................... 27

Exigences d'emplacement ......................................................... 28

Systeme de vidange ................................................................... 29

Specifications _lectriques .......................................................... 30

iNSTRUCTiONS D'INSTALLATION ............................................. 31

F:limination des accessoires de transport .................................. 31

Raccordement des tuyau× d'alimentation ................................. 31

Acheminement du tuyau de vidange ......................................... 32

Immobilisation du tuyau de vidange .......................................... 32

R_glage de I'aplomb de la laveuse ............................................ 33

Achever I'installation .................................................................. 33

CARACTERISTIQUES ET AVANTAGES ..................................... 34

UTILISATION DE LA LAVEUSE ................................................... 35

Mise en marche de la laveuse.................................................... 35

Utilisation du d_tergent appropri_ ............................................. 35

Utilisation du distributeur ........................................................... 36

Pause ou remise en marche ....................................................... 38

Changement des programmes, options et modificateurs .........38

T_moins lumineux ...................................................................... 38

Programmes ............................................................................... 39

Sons normaux _mis par la laveuse ............................................ 41

Options ....................................................................................... 41

Modificateurs .............................................................................. 42

Guide de lessivage ..................................................................... 43

CONSEILS BE LESSIVAGE .......................................................... 44

Chargement ................................................................................ 44

ENTRETIEN DE LA LAVEUSE ..................................................... 45

Nettoyage de la laveuse ............................................................. 45

Tuyaux d'arriv_e d'eau ............................................................... 46

Precautions & prendre avant les vacances,

un entreposage ou un d_m_nagement ...................................... 46

DEPAN NAG E................................................................................. 47

ASSISTANCE OU SERVICE ......................................................... 50

Aux €:tats-Unis ............................................................................ 50

Au Canada .................................................................................. 50

Accessoires ................................................................................ 50

GARANTIE ..................................................................................... 51

2

WASHERSAFETY

Your safety and the safety of others are very important.

We have provided many important safety messages in this manual and on your appliance. Always read and obey all safety

messages.

This is the safety alert symbol.
This symbol alerts you to potential hazards that can kill or hurt you and others.

All safety messages will follow the safety alert symbol and either the word "DANGER" or "WARNING."

These words mean:

You can be killed or seriously injured if you don't immediately

follow instructions.

You can be killed or seriously injured if you don't follow
instructions.

All safety messages will tell you what the potential hazard is, tell you how to reduce the chance of injury, and tell you what can
happen if the instructions are not followed.

IMPORTANT SAFETY INSTRUCTIONS

WARNING: To reduce the risk of fire, electric shock, or injury to persons when using the washer, follow basic precautions,

including the following:

[] Read all instructions before using the washer.
[] Do not wash articles that have been previously cleaned

in, washed in, soaked in, or spotted with gasoline,
dry-cleaning solvents, other flammable, or explosive

substances as they give off vapors that could ignite or

explode.

[] Do not add gasoline, dry-cleaning solvents, or other

flammable, or explosive substances to the wash water.
These substances give off vapors that could ignite or

explode.

[] Under certain conditions, hydrogen gas may be

produced in a hot water system that has not been used

for 2 weeks or more. HYDROGEN GAS IS

EXPLOSIVE. Ifthe hot water system has not been
used for such a period, before using the washing

machine, turn on all hot water faucets and let the water

flow from each for several minutes. This will release

any accumulated hydrogen gas. As the gas is

flammable, do not smoke or use an open flame during
this time.

SAVE THESE INSTRUCTIONS

Do not allow children to play on or in the washer. Close
supervision of children is necessary when the washer is used

near children.

Before the washer is removed from service or discarded,

remove the door or lid.

mDo not reach into the washer if the drum, tub or agitator is

moving.

mDo not install or store the washer where it will be exposed to

the weather.

mDo not tamper with controls.
mDo not repair or replace any part of the washer or attempt any

servicing unless specifically recommended in this manual or in
published user-repair instructions that you understand and

have the skills to carry out.

mSee "Electrical Requirements" for grounding instructions.

INSTALLATIONREQUIREMENTS

Gather the required tools and parts before starting installation.
The parts supplied are in the washer drum.

Tools needed for connecting the water inlet hoses
[] Pliers (that open to 1%6" [39.5 ram])

[] Flashlight (optional)
Tools needed for installation

[] Open end wrenches 17 mm and 13 mm
[] Level
[] Wood block

[] Ruler or measuring tape

Parts supplied:

A B

CC>

A. Drain hose form
B. Inlet hose (2)

C. Inlet hose washer (4)

Alternate Parts
Your installation may require additional parts. If you are interested

in purchasing one of the items listed here, call the toll-free
number on the cover or in the "Assistance or Service" section.

if You Have You Will Need to Buy
Laundry tub or

standpipe taller
than 96" (2.4 m)

Overhead sewer

Floor drain

Drain hose too 4 ft (1.2 m) drain hose extension kit,
short Part Number 285863

Water faucets 2 longer water fill hoses:
beyond reach of fill 6 ft (1.8 m) Part Number 76314,
hoses 10 ft (3.0 m) Part Number 350008

Sump pump system (if not already
available)

Standard 20 gal. (76 L), 30" (76.2 cm) tall
drain tub or utility sink and sump pump
(available from local plumbing suppliers)

Siphon break, Part Number 285834;
additional drain hose

Part Number 8318155; and connector kit,
Part Number 285835

D. Transportbolt hole plug (4)

E.Beaded strap

Pedestal

You have the option of purchasing pedestals of different heights
separately for this washer. You may select a 10" (25.4 cm) or a

15.5" (39.4 cm) pedestal. These pedestals will add to the total
height of the washer for a total height of approximately
48" (121.9 cm) or 53.5" (135.9 cm), respectively.

A B

A. 10" (25.4 cm)pedestal
B. 15.5" (39.4 cm) pedestal

To order, call the dealer from whom you purchased your washer
or refer to the "Assistance or Service" section.

Pedestal Color Part Number
Height

10" (25.4 cm) White WHP1000SQ
10" (25.4 cm) Black WHP1000SB
10" (25.4 cm) Diamond Dust (Silver) WHP1000SU

15.5" (39.4 cm) White XHP1550VW

15.5" (39.4 cm) Black XHP1550VB

15.5" (39.4 cm) Diamond Dust (Silver) XHP1550VU

15.5" (39.4 cm) New Aspen (Green) XHP1550VA

15.5" (39.4 cm) Tuscan Chestnut XHP1550VC

15.5" (39.4 cm) Ocean Sapphire XHP1550VE

15.5" (39.4 cm) Metallic Red XHP1550VF

15.5" (39.4 cm) Oxide XHP1550VJ

15.5" (39.4 cm) Emerald Green XHP1550VP

15.5" (39.4 cm) Burgundy XHP1550VM

Stack Kit

Are you planning to stack your washer and dryer? To do so you

will need to purchase a Stack Kit.

To order, call the dealer from whom you purchased your dryer or

refer to the "Assistance or Service" section. Ask for Part
Number 8541503.

4

Selecting the proper location for your washer improves
performance and minimizes noise and possible washer "walk."

Your washer can be installed under a custom counter, or in a
basement, laundry room, closet, or recessed area. See "Drain

System."
Companion appliance location requirements should also be

considered. Proper installation is your responsibility.
You will need

A water heater set to deliver 120°F (49°C) water to the
washer.

A grounded electrical outlet located within 6 ft (1.8 m) of
where the power cord is attached to the back of the washer.
See "Electrical Requirements."

• Hot and cold water faucets located within 4 ft (1.2 m) of the
hot and cold water fill valves, and water pressure of
20-100 psi (137.9-689.6 kPa).

• A level floor with a maximum slope of 1" (2.5 cm) under entire
washer. Installing the washer on soft floor surfaces, such as
carpets or surfaces with foam backing, is not recommended.

• A sturdy and solid floor to support the washer with a total
weight (water and load) of 400 Ibs (180 kg).

Do not operate your washer in temperatures below 32°F (0°C).
Some water can remain in the washer and can cause damage in
low temperatures.

Recommended installation spacing for custom
undercounter installation

The dimensions shown are for the recommended spacing.

Custom undercounter installation - Washer only

t

39" rain.

(99.0 cm)

1" _ 27"---_- 1"

(2.5 cm) (68.6 cm) (2.5 cm)

Recommended installation spacing for recessed or
closet installation, with or without a pedestal

The dimensions shown are for the recommended spacing.

Recessed area or closet installation

/&

34" ' 48in.2. -

(86.4cnl) (310crn2)

v

_f 3"

(7.6cm)

7

Installation clearances

• The location must be large enough to allow the washer door
to be fully opened.

• Additional spacing should be considered for ease of
installation and servicing.

• Additional clearances might be required for wall, door, and
floor moldings.

• Additional spacing of 1" (2.5 cm) on all sides of the washer is
recommended to reduce noise transfer.

Companion appliance spacing should also be considered.

Washer Dimensions

27"

81" (68,8cm)

(129.5cm)

31W'

(80.0cm)

24 in.2. -

(188crn2)

I1"N-31_"-_14"I_--

(2.8crn) (80crn) (10.2crn)

f 3"

(7.6cm)

T

A B

A. Side view - closet or confined area

B. Closet door with vents

*Min. top and bottom air openings for closet door.
Recessed or closet installation - Washer on pedestal

\\_//

1" --_-_ 27"--_-- 1"

(2.8crn) (68.6crn) (2.8crn)

A

A. Recessed area

B. Side view - closet or confined area

I1"I_ 31w'_1 4"1

(2.8crn)(80crn)(10.2crn)

B

Recommended installation spacing for recessed or
closet installation, with stacked washer and dryer

Thedimensions shown arefor the recommended spacing.

48 in.2 *

(310cm2)

3"* (7.6 cm)

T

o

,!ii "ii?ii,

The washer can be installed using the standpipe drain system

(floor or wall), the laundry tub drain system, or the floor drain
system. Select the drain hose installation method you need. See

"Tools and Parts."

Standpipe drain system - wall or floor (views A & B)

The standpipe drain requires a minimum diameter standpipe of

2" (5 cm). The minimum carry-away capacity can be no less than
17 gal. (64 L) per minute.

The top of the standpipe must be at least 30" (76.2 cm) high and

no higher than 96" (2.4 m) from the bottom of the washer.

3"* (7.8cm)

24 in.2*

(155cm2)

*Required spacing

6"*(_5.2 cm)

76" _

(193cm)

1"* (2.5cm)

'i!,i!i'!i iii"

5½"**--_,_

(14 cm)

*Required spacing

**For venting out the side, 1" (2.5 cm) spacing is allowed.

Recommended installation spacing for cabinet
installation

Thedimensions shown arefor the recommended spacing.
For cabinet installation, with a door,the minimum ventilation

openings in the top are required.

1" -_- -_-- 27" -_

(2.5era) (66.6era)

T

30"rain.

(76.2cm)

[

B

Laundry tub drain system (view C)

The laundry tub needs a minimum 20 gal. (76 L) capacity. The top

of the laundry tub must be at least 30" (76.2 cm) above the floor.

Floor drain system (view D)

The floor drain system requires a siphon break that may be

purchased separately. See "Tools and Parts."

The siphon break must be a minimum of 28" (71 cm) from the

bottom of the washer. Additional hoses might be needed.

(71crn) )_,,_

C D

" . ) 7"(17.8cm)

8B

(22.9cm)

4 _ < 31V2

(10.2cm) (80.0cm) (2.5cm) (2.5cm) (68.6cm) (2.5cm)

1" 1" 27" 1"

6

[] Do not ground to a gas pipe.
[] Check with a qualified electrician if you are not sure the

washer is properly grounded.

[] Do not have a fuse in the neutral or ground circuit.

GROUNDING INSTRUCTIONS

Electrical Shock Hazard

Plug into a grounded 3 prong outlet.
Do not remove ground prong.
Do not use an adapter.

Do not use an extension cord.
Failure to follow these instructions can result in death,

fire, or electrical shock.

[] A 120 volt, 60 Hz., AC only, 15- or 20-amp, fused electrical

supply is required. A time-delay fuse or circuit breaker is
recommended. It is recommended that a separate circuit
serving only this appliance be provided.

[] This washer is equipped with a power supply cord having

a 3 prong grounding plug.

[] To minimize possible shock hazard, the cord must be

plugged into a mating, grounded 3 prong outlet, grounded
in accordance with local codes and ordinances. If a mating
outlet is not available, it is the personal responsibility and
obligation of the customer to have the properly grounded
outlet installed by a qualified electrician.

[] If codes permit and aseparate ground wire is used, it is

recommended that a qualified electrician determine that
the ground path is adequate.

For a grounded, cord-connected washer:

This washer must be grounded. In the event of a malfunction
or breakdown, grounding wilt reduce the risk of electrical

shock by providing a path of least resistance for electric
current. This washer is equipped with a cord having an
equipment-grounding conductor and a grounding plug. The

plug must be plugged into an appropriate outlet that is

properly installed and grounded in accordance with all local
codes and ordinances.

WARNING: Improper connection of the equipment-

grounding conductor can result in a risk of electric shock.

Check with a qualified electrician or serviceman if you are in
doubt as to whether the appliance is properly grounded.

Do not modify the plug provided with the appliance - if it wilt

not fit the outlet, have a proper outlet installed by a qualified
electrician.

For a permanently connected washer:
This washer must be connected to a grounded metal,

permanent wiring system, or an equipment grounding
conductor must be run with the circuit conductors and

connected to the equipment-grounding terminal or lead on
the appliance.

INSTAL TION INSTRUCTIONS

Excessive Weight Hazard

Use two or more people to move and install washer.
Failure to do so can result in back or other injury.

iMPORTANT: Position the washer so that the rear of the washer
is within approximately 3 ft (90 cm) of its final location.

There are 4 bolts in the rear panel of the washer that support the
suspension system during transportation. These bolts also retain
the power cord inside the washer until the bolts are removed.

1. Using a 13 mm wrench

loosen each of the bolts.

2.

Once the bolt is loose, move it to the center of the hole and
completely pull out the bolt, including the plastic spacer
covering the bolt.

3. Once all 4 bolts are removed, discard bolt and spacers. Then
pull the power cord through the opening of the rear panel and
close the hole with the attached cap.

4. Close the bolt holes with the 4 transport bolt hole plugs.

NOTE: If the washer is to be transported at a later date, call your
local service center. To avoid suspension and structural damage
to your washer, it must be properly set up for relocation by a

certified technician.

1.

Insert new flat washers (supplied) into each end of the inlet
hoses. Firmly seat the washers in the couplings.

8.

Using pliers, tighten the couplings with an additional
two-thirds turn.

NOTE: Do not overtighten. Damage to the coupling can result.

g.

Turn on the water faucets and check for leaks.
NOTE: Replace inlet hoses after 5 years of use to reduce the

risk of hose failure. Record hose installation or replacement
dates on the hoses for future reference.

Periodically inspect and replace hoses if bulges, kinks, cuts,
wear, or leaks are found.

Proper routing of the drain hose protects your floors from damage
due to water leakage. Read and follow these instructions.

Remove drain hose from washer cabinet
Gently pull the corrugated drain hose from the shipping clips.

A B

A. Coupling

B.Washer

2. Make sure the washer drum is empty.

3. Attach the hose with the red color indicator to the Hot (left)
inlet valve. Attaching the red coupling first makes it easier to

tighten connection with pliers. Screw on coupling by hand
until it is seated on the washer.

4. Attach the hose with the blue color indicator to the Cold
(right) water inlet valve. Screw on coupling by hand until it is

seated on the washer.

H. Hot water inlet
C. Cold water inlet

5. Using pliers, check the tightness of the hose couplings
already attached to the washer.

NOTE: Do not overtighten. Damage to the coupling can result.

6. Attach hot water hose to the hot water faucet. Screw on
coupling by hand until it is seated on the washer.

7. Attach cold water hose to the cold water faucet. Screw on
coupling by hand until it is seated on the washer.

Laundry tub drain or standpipe drain
Connect the drain hose form to the corrugated drain hose.

A B

A. Snap either end of the drain hose form to the drain hose at

the point where the corrugation begins.

B. Bend drain hose over drain hose form and snap into place.

To keep drain water from going back into the washer:
[] Do not straighten the drain hose, and do not force excess

drain hose into standpipe. Hose should be secure, but loose

enough to provide a gap for air.
[] Do not lay excess hose on the bottom of the laundry tub.
Floor drain

You may need additional parts. See Floor drain under "Tools and
Parts."

8

1=

Drape the power cord over the washer top.

2.

Secure the drain hose to the laundry tub leg or standpipe with
the beaded strap provided. (See illustrations A and B.)

A B C

If the washer faucets and the drain standpipe are recessed
(see illustration C), put the hooked end of the drain hose in
the standpipe. Tightly wrap the beaded strap around the

water inlet hoses and the drain hose.

Do not force excess drain hose into the standpipe.

Properly leveling your washer avoids excessive noise and
vibration.

1. Check the levelness of the washer by placing a level on the
top edge of the washer, first side to side, then front to back.

1. Check the electrical requirements. Be sure that you have the
correct electrical supply and the recommended grounding
method. See "Electrical Requirements."

2. Check that all parts are now installed. If there is an extra part,
go back through the steps to see which step was skipped.

3. Check that you have all of your tools.

4. Dispose of/recycle all packaging materials.

5. Check that the water faucets are on.

6. Check for leaks around faucets and inlet hoses.

Electrical Shock Hazard

Plug into a grounded 3 prong outlet.
Do not remove ground prong.
Do not use an adapter.

Do not use an extension cord.

Failure to follow these instructions can result in death,

fire, or electrical shock.

If the washer is against a wall, move the washer out slightly
before tipping back. If the washer is not level, first prop the
front with a wood block and adjust the feet as necessary;
then prop the back and adjust feet as necessary. Repeat this
step until washer is level.

2. Make sure all four feet are stable and resting on the floor.
Then check that the washer is perfectly level (use a level).

3. After the washer is level, use a 17 mm open-end wrench to
turn the nuts on the feet tightly against the washer cabinet.

IMPORTANT: All four feet must be tightened. If the nuts are
not tight against the washer cabinet, the washer may vibrate.

4. The washer should not move front to back, side to side, or
diagonally when pushed on its top edges.

5. Slide the washer to its final location.

6. Confirm the levelness of the washer.

7=

Plug into a grounded 3 prong outlet.

8.

Read "Washer Use."

9.

To test and clean your machine, make sure there are no
clothes in the washer and add one AFFRESH TM tablet to the

washer drum. Select Power, the Clean Washer cycle, and then
select START. This cycle will take approximately 50 minutes
to complete. Allow the washer to complete the entire cycle
without interruption.

FEATURESANDBENEFITS

The wool wash cycle of this machine has been
approved by Woolmark for the washing of machine
washable Woolmark products provided that the

WooE MARK

Electronic Controls

Flexible electronic controls are easy to use whether you are a
beginner or an expert.

Smart Dispensers

The Smart Dispensers make your washer truly automatic. This
washer provides a four-compartment dispenser which includes
separate compartments for main wash detergent, fabric softener,
bleach, and auto prewash or auto soak. The dispenser has large
pour zones. The dispenser is self-cleaning, and can be easily
removed. Laundry products are diluted with fresh water and
added to the load at the proper time in the wash cycle.

Auto Water Level

This washer automatically adjusts water level for optimal cleaning
and rinsing performance. Two sensors determine load size, load
composition, and suds level, then the sensors adjust the water
level to the proper setting. This eliminates guesswork. The water
level is just right for every wash load size.

Larger Load Size
Since there is no agitator, you can wash larger, bulkier items such

as a king-sized bedspread. You are also able to wash more
clothes at one time, which means fewer loads.

garments are washed according to the instructions
on the garment label and those issued by the
manufacturer of this washing machine, M0614.

Heating Element

This washer has a heating element that automatically heats the

water to the optimal temperature on select cycles. This enables
stepped cleaning, a process in which warm water is brought in
and mixed with detergent first, then the water is heated. Stepped
cleaning starts the wash cycle with warm water to remove stains
(such as blood and grass).

6th SENSE TM Technology

Intuitive intelligence "knows every load" determining load sizes,
water levels, and how much cleaning time is needed.

sense _

Add A Garment

When this option is available at the beginning of the cycle, the
Add a garment Status Light will glow for the first 8 minutes. This
washer allows an 8-minute period in which other garments may

be added to a load.

Direct Injection Wash System

This washer channels 100% of the water through the dispensers

to assure thorough rinse-out and mixture of all the laundry
products before they touch any garments. The water is then
sprayed from the top front onto the center of the load, providing
even distribution and optimum cleaning performance. It is normal
for small amounts of water to remain in the dispensers when the
wash cycle is complete.

Stainless Steel Drum

The stainless steel drum eliminates corrosion and enables higher
spin speeds for more water extraction, helping to reduce drying
time compared to traditional top-load washers.

High-Efficiency Wash System
Your new front-loading, high-efficiency washer saves time with

fewer, larger loads. It also lowers your water and energy bills by
helping conserve resources.

Spin Speeds
This washer automatically selects the spin speed based on the

cycle selected. This factory setting can be changed, however.
This washer offers up to five different spin speed choices.

Efficient Detergent System with Aati-Escape Valve

This washer has aspecially designed valve that closes during

the wash portion of the cycle so that 100% of the water and
detergent mixture is used on the load. The Efficient Detergent
System ensures that no water or detergent is wasted.

6-Point Suspension System

Shock absorbers, 2 springs, and electronic controls are specially
designed to help redistribute the load automatically and minimize
movement of the wash drum during the spin cycle. The 6-Point
Suspension System reduces the amount of force transmitted to
the floor by the washer, resulting in reduced noise and vibration.

10

WASHERUSE

NORMAL

BULKYITEMS SXARr

;OAK

Dooriocked

ContMs ok!Unlock

_ddo, _Sc<or,d

DEUCATE

_,#,s_cYas ....

CLEANWAgHER

Wrh _le_d_ Only

NOTE: The panel shown above may be different from that of your model.

Before washing clothes for the first time, if not completed during
the final installation step, choose the Normal/Casual cycle and
run it without clothes. Use only HE High Efficiency detergent. Use

_/2the manufacturer's recommended amount for a medium-size
load. This initial cycle serves to ensure the interior is clean before

washing clothes.

Fire Hazard

1. Open the washer door by pulling on the handle. Sort laundry

Never place items in the washer that are dampened
with gasoline or other flammable fluids.

No washer can completely remove oil
Do not dry anything that has ever had any type of oJJon

it (including cooking oils).
Doing so can result in death, explosion, or fire.

WARNING: To reduce the risk of fire, electric shock, or injury to
persons, read the IMPORTANT SAFETY INSTRUCTIONS before

operating this appliance.
The following is a guide to using your washer. Please refer to

specific sections of this manual for more detailed information.

2=

Do not store laundry products on the top surface of this washer.
Vibration is normal during operation.

Use only High Efficiency detergents. The package for this type
of detergent will be marked "HE" or "High Efficiency." This wash
system, along with less water, will create too much sudsing with a
regular non-HE detergent. Using regular detergent will likely result in
washer errors, longer cycle times, and reduced rinsing performance.
It may also result in component failures and noticeable mold or
mildew. HE detergents are made to produce the right amount of suds
for the best performance. Follow the manufacturer's instructions

3=

to determine the amount of detergent to use. Remember,
concentrated detergent such as 2x or higher will use less detergent

based on load size.

4=

E£ mated Time {;emainJng

Prewa@ Presoak Extra Rkme

@@®

Deby Wash

Warn* Medium Heavy Loud
Warm L0W Normal Soft

Cold NoSpn Ught G Off

OPTIONS

@@@0

Wate_Temp Spit SoiJ Cyde

w_m_/ins_ Speed Level Signal

Sr,bc on

First Wash Cycle Without Laundry

For All Wash Cycles

according to color and type of fabric. Place a load of sorted
clothes in the washer. Do not overload washer. Overloading
can cause poor cleaning.

[] The washer can be fully loaded, but not tightly packed.

Washer door should close easily.

[] Mix large and small items and avoid washing single items.

Load evenly.

[] Wash small items, such as infant socks, in mesh garment

bags. It is recommended that more than one garment bag
be used, and that each garment bag be filled with equal

amounts of material.

[] When unloading garments, occasionally check under the

gray colored seal at the front of the tub for small items.

Close the washer door by pushing it firmly until the lock
clicks. The washer door will remain locked during the wash
cycle.

NOTES:

[]

After any wash cycle is completed, the door must be
opened and then closed before a new cycle can begin.

[]

The door can be opened only if PAUSE/CANCEL is
selected while the Add A Garment light is glowing or if the
cycle has been canceled.

See "To cancel a cycle" in "Changing Cycles, Options,
and Modifiers" section.

Open the dispenser drawer and add laundry products to the
detergent, bleach, or fabric softener compartments. Close
drawer slowly to avoid spills. See "Using the Dispenser."

Turn on the washer by selecting POWER. Select one of the
cycles by turning the cycle selector. The indicator light for the
selected cycle will glow green. When you are selecting a
wash cycle, the preset options and modifiers (such as Water
Temp, Spin Speed, and Soil Level) for the selected cycle will

_uttor
Somd

Use only HE High Efficiency detergent.

11

glowgreen.Selectableoptionswillglowamber.Ifanoption
ormodifierisunavailablewithaselectedcycle,thelightwill
notilluminate.Thedisplayshowstheestimatedtime
remaining.Thepresetsettingsprovidetherecommended
fabriccarefortheselectedcycle.See"Cycles."

5. SelectthedesiredOptions.Notalloptionsareavailablewith
allcycles.See"Options."

6. SelectthedesiredmodifierssuchasWaterTemp,SpinSpeed,
andSoilLevel.Notallmodifiersareavailablewithallcycles
andoptions.See"Modifiers."

7. Ifdesired,selecttheCYCLESIGNAL.Thesignalishelpful
whenyouarewashingitemsthatshouldberemovedfromthe
washerassoonasitstops.SelectLoud,Soft,orOff.

8. Ifdesired,selecttheBUTTONSOUND.Thisfeaturemakesa
soundeachtimeabuttonispressed.SelectLoud,Soft,orOff.

9. SelectandholdSTARTforapproximately1second.
[] IfyoudonotselectSTARTwithin5minutesofchoosinga

cycle,thewasherautomaticallyshutsoff.

[] Whenthewashcycleiscomplete,theDONEstatuslight

glows,thedoorunlocks,andthewashloadcanberemoved
fromthewasher.Thewasherpowersdownautomatically
60minutesafterthecycleiscompleteandtheDONElight
goesoff.Topowerdownthewashermanuallyafterthewash
cycleiscomplete,selectPAUSE/CANCELonce.

10.Tousethesamecycleagain,pressPOWERfirst,thenselect
START.

11.To begin the wash cycle later

Select DELAY WASH until the desired delay time (in hours)
shows in the Estimated Time Remaining display. Select
START. The countdown to the wash cycle will show in the
display window.

iMPORTANT: When delaying a cycle, use only powdered
detergents in the main wash compartment since liquid
detergents may seep out of the compartment during Delay
Wash, before the wash cycle begins.

Your new washer has a dispenser drawer with four separate
compartments for your laundry products--two are for detergent,
one is for liquid chlorine bleach, and one is for liquid fabric softener.
Laundry products are diluted and dispensed automatically at the
proper time during the wash cycle, making it unnecessary for you
to return to the washer during the cycle to add them.

It is normal for small amounts of water to remain in the
dispensers when the wash cycle is complete.

Do not put laundry products directly into the wash tub. Always
use the proper dispensers when adding laundry products.

Choosing the Right Detergent

Use only High Efficiency detergents. The package for this type
of detergent will be marked "HE" or "High Efficiency." This wash
system, along with lesswater, will create too much sudsing with a
regular non-HE detergent. Using regular detergent will likely result in
washer errors, longer cycle times, and reduced rinsing performance.
It may also result in component failures and noticeable mold
or mildew. HE detergents are made to produce the right amount
of suds for the best performance. Follow the manufacturer's
instructions to determine the amount of detergent to use. Remember,
concentrated detergent such as 2x or higher will use less detergent

based on load size.

To fill dispenser compartments

1. Pull out the dispenser drawer.

2. Add the desired laundry product to the proper compartment.

3. Push in the dispenser drawer slowly and completely (to avoid
a spill).

F

Dispenser

A. Detergent type selector
B. Prewash detergent compartment
C. Main Wash detergent compartment
D. Dispenser release lever
E. Chlorine bleach compartment
F. Fabric softener compartment

Prewash detergent compartment
(Letter B in Dispenser Illustration)

Add detergent to this compartment when using the Prewash

option or Presoak. Liquid or powdered detergent may be used in
this compartment. The detergent will automatically be dispensed
during Prewash if the Prewash option is selected or during the

soak time if Presoak is selected.
[] Using High Efficiency (HE) detergent, add 1/3the

recommended amount to the Prewash compartment and
2/3the recommended amount to the Main Wash

compartment.

Main Wash detergent compartment
(Letters A & C in Dispenser Illustration)

Add liquid or powdered HE detergent to this compartment for
your main wash cycle. The detergent type selector (A) must

always be in the correct position for the detergent type used.
Slide the detergent type selector to the correct position.

iMPORTANT: Ifyou are using the Prewash, Presoak, or Delay
Wash option, powdered detergent must be used in the Main
Wash compartment, since liquid detergents may seep out of
the Main Wash compartment before the main wash begins.

[] Use the detergent manufacturer's recommended amount

for load size.

[] Liquid or powdered color-safe bleach may be added to the

Main Wash compartment along with the same type of
detergent, liquid or powdered.

12

Use only HE High Efficiency detergent.

[]

Liquid detergent:

[]

Powdered detergent:

Selector in position for liquid detergent

A.Detergent type selector

1=

To pause the washer at any time, press PAUSE/CANCEL.

2.

To continue the cycle, press START (for approximately
1 second).

Not all Options and Modifiers are available with all cycles.
Available modifiers will glow amber, if an option or modifier is
unavailable with a selected cycle, the light will not illuminate.
Cycles, Options, and Modifiers can be changed anytime before

START is selected.
Options and Modifiers can be changed anytime after START is

selected and before the start of the selected Option or Modifier.

To cancel a cycle and select a new cycle

1. Press PAUSE/CANCEL twice.

2. Press POWER.

3. Select desired cycle.

4. Select the desired Options or modifiers such as Water Temp,
Spin Speed, and Soil Level.

5. Press START (for approximately 1 second) to restart the
washer at the beginning of the new cycle.

:::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::_;;_____

To cancel a cycle

Selector in position for powdered detergent

A. Detergent type selector

Chlorine bleach compartment
(Letter E in Dispenser Illustration)

Add no more than 2/3cup (160 mL) liquid chlorine bleach to this
compartment. The bleach will be automatically diluted and
dispensed at the best time during the first rinse after the wash
cycle. This compartment cannot dilute powdered bleach.

[] Always measure liquid chlorine bleach. Use a measuring cup

with a pour spout; do not guess. Follow the manufacturer's
directions for proper use.

[] Do not fill beyond the "MAX" level.

NOTE: Overfilling could cause garment damage.

[] At the end of the cycle, a small amount of water may be left

in the dispenser. This is normal.

Fabric softener compartment
(Letter F in Dispenser Illustration)

Pour measured liquid fabric softener into the fabric softener
dispenser, if desired.

[] Do not overfill. The dispenser holds 1/4cup (60 mL).
[] The fabric softener is dispensed in the rinse cycle. If Extra

Rinse is selected, the fabric softener will be dispensed during
the Extra Rinse.

[] Do not use fabric softener dispensing balls in this washer.

Dispensing balls will not operate correctly with this washer.
[] Do not spill or drip any fabric softener onto the clothes.
[] At the end of the cycle, a small amount of water may be left

in the dispenser. This is normal.
NOTE: Use only liquid fabric softener in this dispenser.

1. Press PAUSE/CANCEL twice.

2. The washer powers down, the door unlocks, and clothes can
be removed.

NOTE: If the water level or the temperature is too high, the
washer will drain automatically before the door unlocks.

To change Options or Modifiers after the cycle has
started

1. Press PAUSE/CANCEL once.

2. Select the desired Options or modifiers such as Water Temp,
Spin Speed, and Soil Level. Available selections will glow

amber.

3. Press START (for approximately 1 second) to continue the
cycle.

To drain the washer manually

1. Press PAUSE/CANCEL twice.

2. Press POWER.

3. Select DRAiN/SPIN.

4. Press START (for approximately 1 second) to begin the drain.

5. When the spin is complete, the door unlocks. Items can be
removed from the washer.

These lights show which portion of the cycle the washer is

operating. They also indicate when you can add an additional
item to the wash cycle and when the controls are locked.

EstimatedTimeRemaining

13

Add a garment

::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::

This washer allows an 8-minute period in which other garments
may be added to the load. You can add items to the washer if the
Add a garment status light is glowing.

To add items when Add a garment light is glowing

1. Select PAUSE/CANCEL once. The washer door unlocks, and
items can be added.

Cycles can be selected by turning the Cycle Control knob to the
desired cycle. Each cycle is designed for different types of fabric
and soil levels. The modifier indicator lights, on the right-hand
side of the panel, will change as cycles are selected.

NORMAL

DELICATE_CASUALBULKYiTEMS

2. To continue the cycle, close the door and select and hold
START (for approximately 1 second).

To add items when the Add a garment light is not glowing

WOOL_/__ HEAVYDUTY

1. Select PAUSE/CANCEL twice. This will cancel the wash cycle
and options. The washer door unlocks, and items can be

added.

2. Close the door, press POWER, and select the new cycle and
options. Select and hold START (for approximately 1 second).

w_s,_YCL_S ..... RINSE/ SPIN

CL_:ANWASHER SOAK

Done

W_thBIe_ hOnly

[] Each cycle has a preset Soil Level (estimated cycle time),
The Done status light stays on for 60 minutes after the cycle is
complete, and then the washer shuts off.

Water Temperature, and Spin Speed, and may have preset
options. The preset settings provide the recommended fabric
care for the selected cycle.

Controls Lock/Unlock

The Controls Lock avoids unintended use of the washer. You can
also use the control lock feature to avoid unintended cycle or

option changes during a cycle. When Controls Lock is lit, all
buttons are disabled except for Pause/Cancel and Start. You can

lock the controls while the washer is operating.
To lock the controls

Press and hold CONTROLS LOCK/UNLOCK for 3 seconds.

[] The preset settings will glow green to show the preselected

options and modifiers, and be changed anytime before START
is pressed. Not all options and modifiers are available with all
cycles. Available selections glow amber. (To change settings
after the cycle has started, press PAUSE/CANCEL once, then
select the desired settings. Press START to continue the
cycle.)

[] Powdered detergents may not dissolve well in a slow-speed

cycle. For best results, use liquid detergent in slow-speed
cycles.

Co=troisLock/Un_ock

_o_d_3 se or,ds

The status light next to the CONTROLS LOCK/UNLOCK button
will glow.

To unlock the controls
Press and hold CONTROLS LOCK/UNLOCK for 3 seconds until
the status light turns off.

NOTE: To lock or unlock the controls when the washer is off,
press and hold CONTROLS LOCK/UNLOCK for 3 seconds.

Door Locked

When the status light glows, the door is locked.

Sensing/Revising Estimated Time

The cycle times vary automatically based on your water pressure,
water temperature, detergent, and clothes load.

The washer will automatically sense the progress in the cycle and
adjust the Estimated Time Remaining display. While the washer is
sensing, the estimated time will flash and the Sensing status light
will glow. When the sensing is complete, the flashing stops, the
status light goes off, and the Estimated Time Remaining display
is updated.

The cycle time will be extended if oversudsing occurs or the load
is unbalanced. The SUD routine removes extra suds and assures

proper rinsing of your garments. See "Troubleshooting." During
the unbalance routine, the time displayed may pause until this
activity is complete, then resume with the remainder of the cycle.

Preset cycle settings

Each cycle has a preset Soil Level (cycle time), Water

Temperature, and Spin Speed. The preset settings provide the

recommended fabric care for the selected cycle. See chart.

Cycle Soil Level Water Temp Spin

(cycle time) Speed

Sanitary Normal Super Hot/Cold Extra High

(1:50)

Whitest Normal Hot/Cold Extra High
Whites (1:20)

Heavy Duty Normal Hot/Cold Extra High

(1:25)

Bulky Items Normal Warm/Cold Low

(0:55)

Normal/ Normal Warm/Cold High
Casual (0:50)

Delicate Normal Warm/Cold Low

(0:40)

Wool Normal Warm/Cold Low

(0:30)

Silk Normal Cold/Cold No Spin

(O:25)

Hand Normal Cold/Cold Low

Washables (0:30)

14

Cycle Soil Level Water Temp Spin

(cycletime) Speed

Quick Wash Light Warm/Cold Extra High

(2-3 items) (0:25)
Clean N/A High

Washer
Soak Normal Warm/Cold No Spin

(0:30)

Rinse/Spin Normal Cold/Cold Extra High

(0:20)

Drain!Spin Normal N/A Extra High

(0:11)

To change the preset cycle settings
Press the selector of each available setting until the desired

setting glows green.

Sanitary

Use this cycle to clean heavily soiled, colorfast fabrics. This
cycle combines a super hot water temperature and fast speed
tumbling to help ensure the removal of heavy soils and stains.
It is recommended that you set your hot water heater to 120°F
(49°C) to ensure proper performance during this cycle. Extra high
speed spin helps shorten drying time.

Whitest Whites

This cycle is especially designed for cleaning loads of soiled
white fabrics with the addition of bleach. Hot washing

temperatures assure optimal bleach activity. An additional rinse
provides optimal rinse performance to avoid chlorine residues on

your laundry. This cycle combines fast-speed tumbling, longer
wash time, and extra high speed spin to shorten drying time.

Heavy Duty

Use this cycle to wash loads of sturdy, colorfast fabrics and
heavily soiled garments. This cycle combines fast-speed
tumbling, longer wash time, and extra high speed spin to shorten
drying times. {f the water temperature is lower than needed for
this cycle, the heater will warm the water to the optimum
temperature.

Bu{ky {terns

Use this cycle to wash large items such as blankets and
comforters. This cycle starts with a soak to thoroughly saturate
your large load. This is followed by medium wash action and
low-speed spin only to maintain load balance.

Normal/Casual

Use this cycle to wash loads of no-iron fabrics, such as sport
shirts, blouses, casual business clothes, permanent press
blends, cottons and linens, and synthetic fabrics. This cycle
combines medium-speed tumbling, high-speed spin, and a load
cooling process to reduce wrinkling.

NOTE: For the best energy performance, use the Normal/Casual
Cycle.

Delicate

Use this cycle to clean hand washable and special-care

garments. Similar to the way garments are hand washed in a

sink, the wash action of this cycle combines periods of low speed

tumbling and soaking. CRADLE CLEAN TM motion offers gentle

fabric care for safe and effective cleaning of delicate and hand

washable garments. Low speed spin reduces wrinkling.

[] Use mesh garment bags to wash undergarments such as

underwire bras, items with strings, and small items such as
infant socks.

Woo{

Use this cycle to clean machine washable woolen garments. (Check

the care instructions to make sure that garment is washable.)

CRADLE CLEANTM motion offers gentle fabric care for safe and

effective cleaning of washab{e wool. This cycle features gentle

tumbling and low-speed spin to provide optimum garment care.

r

Silk

Use this cycle to clean washable silk garments. (Check label

instructions to make sure that garment is washable.) This cycle

gently tumbles and drains without spinning to gently clean

garments and minimize wrinkling. Because there is no spinning

action, garments will contain a higher amount of water at the end

of this cycle. CRADLE CLEAN TM motion offers gentle fabric care

for safe and effective cleaning of silk.

[] Use mesh garment bags as necessary.

Hand Washab{es

Use this cycle to clean hand washable and special-care

garments. Similar to the way garments are hand washed in a

sink, the wash action of this cycle combines periods of low speed

tumbling and soaking. CRADLE CLEAN TM motion offers gentle

fabric care for safe and effective cleaning of delicate and hand

washable garments. Low speed spin reduces wrinkling.

Quick Wash

Use this cycle to wash small loads of 2-3 lightly soiled garments

that are needed in a hurry. This cycle combines fast-speed

tumbling, a shortened wash time, and extra high speed spin

to shorten drying time.

Clean Washer

Use the Clean Washer cycle once a month to keep the inside of

your washer fresh and clean. This cycle uses a higher water level.

Use with AFFRESH TM washer cleaner tablet or liquid chlorine

bleach to thoroughly clean the inside of your washing machine.

This cycle should not be interrupted. See "Cleaning Your

Washer."

IMPORTANT: Do not place garments or other items in the washer

during the Clean Washer cycle. Use this cycle with an empty

wash drum.

Soak

Use the Soak cycle to help remove small spots of set-in stains on

fabrics. This cycle provides a soak time with warm or cold water

followed by drain. Extra water, a short tumbling phase for equal

distribution of the laundry, and a soaking time without drum

movement improve the removal of set-in stains. Drain without

spin assures gentle treatment, even for delicate articles.

15

Rinse/Spin

Delay Wash

Use this cycle to get a rinse and spin only. This cycle combines
fast-speed tumbling and extra high speed spin. If desired, you
can reduce the spin speed by selecting the speed you want from

the SPIN SPEED modifier.
A Rinse/Spin cycle is useful for

[] Loads that need rinsing only.
[] Adding fabric softener to a load.

Drain/Spin

Use this cycle to drain your washer or to drain and spin your
wash load. The spin speed is preset to extra high. If desired, you

can reduce the spin speed by selecting the speed you want from
the SPIN SPEED modifier.

NOTE: Loads of synthetics, delicate fabrics, hand washables,
and washable woolens should be drained with no spin or low

spin speed to avoid fabric stress.

As with any new product, you will hear sounds that you are not
accustomed to. You may hear various sounds when the door is
locked and unlocked, and during the washing, rinsing, and
spinning process. Between changes in wash actions, there will
be momentary pauses. You will hear water spraying and
splashing during the wash and rinse cycles. These new sounds
and pauses are part of normal washer operation.

You can customize your wash by adding options to your cycle
selections. You can add or change an option after starting a cycle
anytime before the selected option begins. Not all options are
available with all cycles. Available options will glow amber.
Current selections will glow green. If an option is unavailable
with a selected cycle, the light will not illuminate.

Pewash Resoak ExtraRinse

®®@

Deby Wasl

_x S0ft

[] See the "Laundry Guide" for an overview of possible options

for each Wash Cycle selection.

[] You can select more than one option for a cycle. Some

options cannot be added to some cycles. For example,
Prewash cannot be added to the Quick Wash cycle.

[] If an option is unavailable with a selected cycle, there will be

3 short tones, and the light for that option will not glow when
selected.

OPTIONS

l, bud

Off

Cy@ _uttor'

ig_'al Sound

To begin the wash cycle later, select DELAY WASH until the

desired delay time (in hours) shows in the Estimated Time

Remaining display, and then select START. The countdown to the

wash cycle will show in the display window, and the button

indicator will blink until the cycle begins.

IMPORTANT: When delaying a cycle, use only powdered

detergents in the main wash compartment since liquid detergents

may seep out of the compartment during Delay Wash, before the

wash cycle begins.

Prewash

Use this option for heavily soiled loads that need pretreatment.

This option adds a 15-minute prewash and drain to the main

wash cycle.

NOTES:

[] Add detergent to the Prewash and Main Wash

compartments of the Dispenser Drawer.

[] When using Prewash, use only powdered detergents in the

main wash compartment since liquid detergents may seep
out of the compartment during Delay Wash, before the wash

cycle begins.

NOTE: The Prewash and Presoak options cannot be selected in

the same cycle.

Presoak

Use the Presoak option for loads of heavily soiled cotton, linen,

polyester, or nylon with set-in stains. During Presoak, water will

be added to the drum and the laundry will be equally distributed

by a short tumbling phase. Laundry will then be soaked by

phases without drum movement. After soaking, the washer

drains without spinning.

[] Add detergent to both the Prewash and Main Wash

compartments of the Dispenser Drawer.

[] Use powdered detergent for the main wash cycle because

liquid detergent will seep into the washer during Soak.

[] For cycles with Hot Wash Temperatures, the Presoak

temperature is set to Warm. Otherwise the Presoak
temperature is the same as the Wash Temperature.

[] The Presoak and Prewash options cannot be selected in the

same cycle.

Extra Rinse

An extra rinse can be used to aid in the removal of detergent or

bleach residue from garments. This option provides an additional

rinse with the same water temperature as the first rinse.

Cycle Signal

This signal is helpful when you are removing items from the

washer as soon as it stops. Press CYCLE SIGNAL to select Loud,

Soft, or Off.

Button Sound

16

Button sounds are used to notify you of what has been selected

or to let you know when something is not available. Press

BUTTON SOUND to select Loud, Soft, or Oft.