THANK YOU for purchasing this high-quality product. Register your range at www.whirlpool.com. In Canada, register your range
at www.whirlpool.ca.
For future reference, please make a note of your product model and serial numbers. These can be found on the label located on the
upper-left side of the front frame.
Model Number___________________________________________ Serial Number___________________________________________
Para obtener acceso a “Instrucciones para el usuario de la estufa a gas” en español, o para obtener información adicional acerca
de su producto, visite: www.whirlpool.com
Para referencia futura, tome nota de los números de modelo y de serie de su producto. Puede encontrarlos en la etiqueta ubicada
en el lado superior izquierdo del marco frontal.
Table of Contents
RANGE SAFETY .............................................................................2
The Anti-Tip Bracket ....................................................................3
Your safety and the safety of others are very important.
We have provided many important safety messages in this manual and on your appliance. Always read and obey all safety
messages.
This is the safety alert symbol.
This symbol alerts you to potential hazards that can kill or hurt you and others.
All safety messages will follow the safety alert symbol and either the word “DANGER” or “WARNING.”
These words mean:
You can be killed or seriously injured if you don't immediately
DANGER
WARNING
All safety messages will tell you what the potential hazard is, tell you how to reduce the chance of injury, and tell you what can
happen if the instructions are not followed.
WARNING: If the information in these instructions is not followed exactly, a fire or
explosion may result causing property damage, personal injury or death.
follow instructions.
You
can be killed or seriously injured if you don't
instructions.
follow
– Do not store or use gasoline or other flammable vapors and liquids in the vicinity of this
or any other appliance.
– WHAT TO DO IF YOU SMELL GAS:
Do not try to light any appliance.
•
Do not touch any electrical switch.
•
Do not use any phone in your building.
•
Immediately call your gas supplier from a neighbor's phone. Follow the gas supplier's
•
instructions.
If you cannot reach your gas supplier, call the fire department.
•
Installation and service must be performed by a qualified installer, service agency or
–
the gas supplier.
WARNING: Gas leaks cannot always be detected by smell.
Gas suppliers recommend that you use a gas detector approved by UL or CSA.
For more information, contact your gas supplier.
If a gas leak is detected, follow the “What to do if you smell gas” instructions.
State of California Proposition 65 Warnings:
WARNING: This product contains one or more chemicals known to the State of California to cause cancer.
WARNING: This product contains one or more chemicals known to the State of California to cause birth defects or other
reproductive harm.
2
The Anti-Tip Bracket
The range will not tip during normal use. However, the range can tip if you apply too much force or weight to the open door without the
anti-tip bracket fastened down properly.
WARNING
Tip Over Hazard
A child or adult can tip the range and be killed.
Verify the anti-tip bracket has been properly installed and engaged per installation instructions.
Re-engage anti-tip bracket if range is moved.
Do not operate range without anti-tip bracket installed and engaged.
Failure to follow these instructions can result in death or serious burns to children and adults.
To verify the anti-tip bracket is installed and engaged:
Anti-Tip
Bracket
Range Foot
• Slide range forward.
• Look for the anti-tip bracket securely attached to floor or wall.
• Slide range back so rear range foot is under anti-tip bracket.
• See installation instructions for details.
IMPORTANT SAFETY INSTRUCTIONS
WARNING: To reduce the risk of fire, electrical shock,
injury to persons, or damage when using the range, follow
basic precautions, including the following:
WARNING: TO REDUCE THE RISK OF TIPPING OF
■
THE RANGE, THE RANGE MUST BE SECURED BY
PROPERLY INSTALLED ANTI-TIP DEVICES. TO CHECK
IF THE DEVICES ARE INSTALLED PROPERLY, SLIDE
RANGE FORWARD, LOOK FOR ANTI-TIP BRACKET
SECURELY ATTACHED TO FLOOR OR WALL, AND
SLIDE RANGE BACK SO REAR RANGE FOOT IS UNDER
ANTI-TIP BRACKET.
■
WARNING:
heater to heat or warm the room. Doing so may result in
carbon monoxide poisoning and overheating of the oven.
■
WARNING:
in the oven bottom or cover an entire rack with materials
such as aluminum foil. Doing so blocks air flow through the
oven and may cause carbon monoxide poisoning.
Aluminum foil linings may also trap heat, causing a fire
hazard.
■ CAUTION: Do not store items of interest to children in
cabinets above a range or on the backguard of a range –
children climbing on the range to reach items could be
seriously injured.
NEVER use this appliance as a space
NEVER cover any slots, holes or passages
Proper Installation – The range, when installed, must be
■
electrically grounded in accordance with local codes or, in
the absence of local codes, with the
Code, ANSI/NFPA 70
electrically grounded in accordance with Canadian
Electrical Code. Be sure the range is properly installed and
grounded by a qualified technician.
This range is equipped with a three-prong grounding plug
■
for your protection against shock hazard and should be
plugged directly into a properly grounded receptacle. Do
not cut or remove the grounding prong from this plug.
■ Disconnect power before servicing.
Injuries may result from the misuse of appliance doors or
■
drawers such as stepping, leaning, or sitting on the doors
or drawers.
Maintenance – Keep range area clear and free from
■
combustible materials, gasoline, and other flammable
vapors and liquids.
■ Storage in or on the Range – Flammable materials should
not be stored in an oven or near surface units.
Top burner flame size should be adjusted so it does not
■
extend beyond the edge of the cooking utensil.
For self-cleaning ranges –
Before Self-Cleaning the Oven – Remove broiler pan and
■
other utensils. Wipe off all excessive spillage before
initiating the cleaning cycle.
. In Canada, the range must be
National Electrical
SAVE THESE INSTRUCTIONS
3
FEATURE GUIDE
This manual covers several models. Your model may have some or all of the items listed. Refer to this manual or Frequently Asked
Questions (FAQs) section of our website at www.whirlpool.com for more detailed instructions. In Canada, reference the Customer
Service section at www.whirlpool.ca.
KEYPADFEATUREINSTRUCTIONS
LIGHTOven cavity
CLEAN
(on some models)
CONTROL LOCK
(hold 3 sec)
CLOCKClock
TIMER SET/OFFOven timer
BAKEBaking and
KEEP WARMHold warm
light
Self-Cleaning
cycle
Oven control
lockout
roasting
While the oven door is closed, press LIGHT to turn the light on and off. The oven light will come
on when the oven door is opened. The oven light will not come on during the Self-Cleaning cycle.
See the “Self-Cleaning Cycle” section.
1. Check that the oven is OFF.
2. Press and hold CONTROL LOCK for 3 seconds.
3. A tone will sound and a lock will be displayed.
4. Repeat to unlock. No keypads will function with the controls locked.
The clock uses a 12-hour cycle.
1. Check that the oven is OFF.
2. Press CLOCK.
3. Press Temp/Time “up” or “down” arrow keypad to set the hours. Press CLOCK to switch
the minutes. Press Temp/Time “up” or “down” arrow keypad to set the minutes.
4. Press CLOCK or START.
The timer can be set in hours or minutes up to 9 hours and 59 minutes.
1. Press TIMER SET/OFF.
2. Press Temp/Time “up” or “down” arrow keypad to set the length of time.
3. Press START to begin the countdown. If enabled, end-of-cycle tones will sound at end
of countdown.
4. Press TIMER SET/OFF to cancel the Timer. Do not press the Cancel keypad because the oven
will turn off.
1. Press BAKE.
2. Press Temp/Time “up” or “down” arrow keypad until desired temperature is reached. A tone
will sound if the minimum or maximum temperature is reached.
3. Press START.
4. To change the temperature, repeat Step 2. Press START.
5. Press CANCEL when finished.
NOTE: The convection fan will shut off when the oven door is opened. If the oven door remains
open for too long, the heating elements will shut off until the oven door is closed. All timers,
including any active Cook Time or Timed Cook functions, will continue to count down.
Food must be at serving temperature before placing it in the warmed oven.
1. Press KEEP WARM.
2. Temperature is set at 170°F (75°C). Press the Temp/Time “up” or “down” arrow keypad until
desired temperature is reached. A tone will sound if the minimum or maximum temperature
is reached.
3. Press START.
4. Press CANCEL when finished.
NOTES:
■ The oven will automatically turn off after 60 minutes.
■ The convection fan will shut off when the oven door is opened. If the oven door remains
open for too long, the heating elements will shut off until the oven door is closed. All timers,
including any active Cook Time or Timed Cook functions, will continue to count down.
4
KEYPADFEATUREINSTRUCTIONS
FROZEN
BAKE
Prepackaged
food
1. Position the food on a flat rack in the oven on rack position 4. See the “Positioning Racks and
Bakeware” section.
NOTE: Cook only 1 package of frozen food at a time when using Frozen Bake™ Technology.
2. Press FROZEN BAKE LASAGNA or PIZZA.
3. Press the
Temp/Time
on the food packaging.
4. Press COOK TIME.
5. Press the Temp/Time “up” or “down” arrow keypad to set the maximum cook time as
recommended on the food packaging.
6. Press START. The range will calculate the best cook time based on the current oven temperature.
NOTE: The cook time that appears in the display is the estimated required cook time as
calculated by the oven control. It may be different than the time you entered. A beep will alert
you to check the food’s doneness with at least 2 minutes remaining on the timer. Follow the
prompts on the display to select more time if desired.
7. Press START to start the calculated time.
8. At the end of the cook time, a beep will alert you to check the food’s doneness. Follow the
prompts on the display to select more time if desired. Unless more time is selected, the bake
element turns off.
9. Press CANCEL when finished.
NOTE: The convection fan will shut off when the oven door is opened. If the oven door remains
open for too long, the heating elements will shut off until the oven door is closed. All timers,
including any active Cook Time or Timed Cook functions, will continue to count down.
CONVECT
BAKE
Convection
baking and
roasting
1. Press CONVECT BAKE.
2. Press Temp/Time “up” or “down” arrow keypad until desired temperature is reached. A tone
will sound if the minimum or maximum temperature is reached.
3. Press START.
4. To change the temperature, repeat Step 2. Press START.
5. Press CANCEL when finished.
NOTES:
■ There is a 5-minute delay before the convection fan turns on when starting a Convect
Bake cycle.
■ The convection fan will shut off when the oven door is opened. If the oven door remains
open for too long, the heating elements will shut off until the oven door is closed. All timers,
including any active Cook Time or Timed Cook functions, will continue to count down.
BROILBroiling
1. Position cookware in oven and close the oven door.
2. Press BROIL.
3. Press Temp/Time “up” or “down” arrow keypad until the desired temperature is reached.
A tone will sound if the minimum or maximum temperature is reached.
4. Press START.
5. To change the temperature, repeat Step 3. Press START.
6. Press CANCEL when finished.
NOTE: The convection fan will shut off when the oven door is opened. If the oven door remains
open for too long, the heating elements will shut off until the oven door is closed. All timers,
including any active Cook Time or Timed Cook functions, will continue to count down.
STARTCooking start
The Start keypad begins any oven function. If Start is not pressed within 5 seconds, a tone will
sound and Start will blink until pressed or canceled. If Start is not pressed within 1 minute after
pressing a keypad, the function is canceled and the time of day is displayed.
DELAY Delayed start
The Delay keypad is used to enter the starting time for an oven function with a delayed start. Delay
should not be used for foods such as breads and cakes because they may not bake properly.
To set a timed cook or a delayed timed cook, see the “Cook Time” section.
COOK TIMETimed cooking
Timed cooking allows the oven to be set to turn on at a certain time of day, cook for a set length
of time, and/or shut off automatically.
To set a timed cook or a delayed timed cook, see the “Cook Time” section.
CANCELRange function
TEMP/TIMETemperature and
The Cancel keypad stops any function except Timer and Control Lock.
The Temp/Time “up” and “down” arrow keypads are used to adjust time and temperature settings.
time adjust
“up” or “down” arrow keypad to set the temperature as recommended
5
COOKTOP USE
WARNING
B
A
Sealed Surface Burners
A
Fire Hazard
Do not let the burner flame extend beyond the edge of
the pan.
Turn off all controls when not cooking.
Failure to follow these instructions can result in death
or fire.
Electric igniters automatically light the surface burners when
control knobs are turned to IGNITE.
Before setting a control knob, place filled cookware on the
grate. Do not operate a burner using empty cookware or
without cookware on the grate.
To Set:
1. Push in and turn knob counterclockwise to IGNITE.
IMPORTANT: All 4 surface burners will click. Only the burner
with the control knob turned to IGNITE will produce a flame.
2. Turn knob to anywhere between Hi and Lo.
REMEMBER: When range is in use or (on some models)
during the Self-Cleaning cycle, the entire cooktop area may
become hot.
IMPORTANT: When cooktop is in use, the Self-Cleaning cycle will
be disabled. An error tone will sound and the Cooktop On indicator
light will flash. If you turn on the cooktop when the Self-Cleaning
cycle is in use, it will disable the Self-Cleaning cycle and “END” will
be displayed.
Power Failure
In case of prolonged power failure, the surface burners can
be lit manually. Hold a lit match near a burner and turn knob
counterclockwise to IGNITE. After the burner lights, turn knob
to setting.
B
C
A. Burner cap
B. Burner base
C. Alignment pins
IMPORTANT: Do not obstruct the flow of combustion and
ventilation air around the burner grate edges.
Burner cap: Always keep the burner cap in place when using a
surface burner. A clean burner cap will help avoid poor ignition and
uneven flames. Always clean the burner cap after a spillover and
routinely remove and clean the caps according to the “General
Cleaning” section.
Gas tube opening: Gas must flow freely throughout the gas tube
opening for the burner to light properly. Keep this area free of soil
and do not allow spills, food, cleaning agents, or any other
material to enter the gas tube opening. Keep spillovers out of the
gas tube by always using a burner cap.
A. 1-11/2" (2.5-3.8 cm)
B. Burner ports
Burner ports: Check burner flames occasionally for proper size
and shape as shown in the previous illustration. A good flame
is blue in color, not yellow. Keep this area free of soil and do not
allow spills, food, cleaning agents, or any other material to enter
the burner ports.
D. Igniter
E. Gas tube opening
D
E
To Clean:
IMPORTANT: Before cleaning, make sure all controls are OFF and
the oven and cooktop are cool. Do not use oven cleaners, bleach,
or rust removers.
1. Remove the burner cap from the burner base and clean
according to the “General Cleaning” section.
2. Clean the gas tube opening with a damp cloth.
6
Loading...
+ 12 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.