THANK YOU for purchasing this high-quality product. Register your range at www.whirlpool.com. In Canada, register your range
at www.whirlpool.ca.
For future reference, please make a note of your product model and serial numbers. These can be found on the label located on the
upper-left side of the front frame.
Model Number________________________________________Serial Number________________________________________
Para obtener acceso a “Instrucciones para el usuario de la estufa a gas” en español, o para obtener información adicional acerca
de su producto, visite: www.whirlpool.com.
Para referencia futura, tome nota de los números de modelo y de serie de su producto. Puede encontrarlos en la etiqueta ubicada
en el lado superior izquierdo del marco frontal.
Table of Contents
RANGE SAFETY .............................................................................2
The Anti-Tip Bracket ....................................................................3
Your safety and the safety of others are very important.
We have provided many important safety messages in this manual and on your appliance. Always read and obey all safety
messages.
This is the safety alert symbol.
This symbol alerts you to potential hazards that can kill or hurt you and others.
All safety messages will follow the safety alert symbol and either the word “DANGER” or “WARNING.”
These words mean:
You can be killed or seriously injured if you don't immediately
DANGER
WARNING
All safety messages will tell you what the potential hazard is, tell you how to reduce the chance of injury, and tell you what can
happen if the instructions are not followed.
WARNING: If the information in these instructions is not followed exactly, a fire or
explosion may result causing property damage, personal injury or death.
follow instructions.
You
can be killed or seriously injured if you don't
instructions.
follow
– Do not store or use gasoline or other flammable vapors and liquids in the vicinity of this
or any other appliance.
– WHAT TO DO IF YOU SMELL GAS:
Do not try to light any appliance.
•
Do not touch any electrical switch.
•
Do not use any phone in your building.
•
Immediately call your gas supplier from a neighbor's phone. Follow the gas supplier's
•
instructions.
If you cannot reach your gas supplier, call the fire department.
•
– Installation and service must be performed by a qualified installer, service agency or
the gas supplier.
WARNING: Gas leaks cannot always be detected by smell.
Gas suppliers recommend that you use a gas detector approved by UL or CSA.
For more information, contact your gas supplier.
If a gas leak is detected, follow the “What to do if you smell gas” instructions.
State of California Proposition 65 Warnings:
WARNING: This product contains one or more chemicals known to the State of California to cause cancer.
WARNING: This product contains one or more chemicals known to the State of California to cause birth defects or other
reproductive harm.
2
The Anti-Tip Bracket
The range will not tip during normal use. However, the range can tip if you apply too much force or weight to the open door without the
anti-tip bracket fastened down properly.
WARNING
Tip Over Hazard
A child or adult can tip the range and be killed.
Verify the anti-tip bracket has been properly installed and engaged per installation instructions.
Re-engage anti-tip bracket if range is moved.
Do not operate range without anti-tip bracket installed and engaged.
Failure to follow these instructions can result in death or serious burns to children and adults.
To verify the anti-tip bracket is installed and engaged:
Anti-Tip
Bracket
Range Foot
• Slide range forward.
• Look for the anti-tip bracket securely attached to floor or wall.
• Slide range back so rear range foot is under anti-tip bracket.
• See installation instructions for details.
IMPORTANT SAFETY INSTRUCTIONS
WARNING: To reduce the risk of fire, electrical shock,
injury to persons, or damage when using the range, follow
basic precautions, including the following:
WARNING: TO REDUCE THE RISK OF TIPPING OF
■
THE RANGE, THE RANGE MUST BE SECURED BY
PROPERLY INSTALLED ANTI-TIP DEVICES. TO CHECK
IF THE DEVICES ARE INSTALLED PROPERLY, SLIDE
RANGE FORWARD, LOOK FOR ANTI-TIP BRACKET
SECURELY ATTACHED TO FLOOR OR WALL, AND
SLIDE RANGE BACK SO REAR RANGE FOOT IS UNDER
ANTI-TIP BRACKET.
■
WARNING:
heater to heat or warm the room. Doing so may result in
carbon monoxide poisoning and overheating of the oven.
■
WARNING:
in the oven bottom or cover an entire rack with materials
such as aluminum foil. Doing so blocks air flow through the
oven and may cause carbon monoxide poisoning.
Aluminum foil linings may also trap heat, causing a fire
hazard.
■ CAUTION: Do not store items of interest to children in
cabinets above a range or on the backguard of a range –
children climbing on the range to reach items could be
seriously injured.
NEVER use this appliance as a space
NEVER cover any slots, holes or passages
Proper Installation – The range, when installed, must be
■
electrically grounded in accordance with local codes or, in
the absence of local codes, with the
Code, ANSI/NFPA 70
electrically grounded in accordance with Canadian
Electrical Code. Be sure the range is properly installed and
grounded by a qualified technician.
This range is equipped with a three-prong grounding plug
■
for your protection against shock hazard and should be
plugged directly into a properly grounded receptacle. Do
not cut or remove the grounding prong from this plug.
■ Disconnect power before servicing.
Injuries may result from the misuse of appliance doors or
■
drawers such as stepping, leaning, or sitting on the doors
or drawers.
Maintenance – Keep range area clear and free from
■
combustible materials, gasoline, and other flammable
vapors and liquids.
■ Storage in or on the Range – Flammable materials should
not be stored in an oven or near surface units.
Top burner flame size should be adjusted so it does not
■
extend beyond the edge of the cooking utensil.
For self-cleaning ranges –
Before Self-Cleaning the Oven – Remove broiler pan and
■
other utensils. Wipe off all excessive spillage before
initiating the cleaning cycle.
. In Canada, the range must be
National Electrical
SAVE THESE INSTRUCTIONS
3
KEY USAGE TIPS
D
A
Surface Temperatures
When the range is in use, all range surfaces may become hot,
such as the knobs and oven door.
Warming or Storage Drawer
When the oven is in use, the drawer may become hot. Do not store
plastics, cloth, or other items that could melt or burn in the drawer.
Oven Vent
The oven vent releases hot air and moisture from the oven and
should not be blocked or covered. Do not set plastics, paper, or
other items that could melt or burn near the oven vent.
Preheating
When beginning a Bake, Convect Bake, or Convect Roast cycle,
the oven will begin preheating after START is pressed. The oven
will take approximately 12 to 15 minutes to reach 350°F (177°C)
with all of the oven racks provided with your oven inside the
oven cavity. Higher temperatures will take longer to preheat. The
preheat cycle rapidly increases the oven temperature. The actual
oven temperature will go above your set temperature to offset
the heat lost when your oven door is opened to insert food. This
ensures that when you place your food in the oven, the oven
will begin at the proper temperature. Insert your food when the
preheat tone sounds. Do not open the door during preheat before
the tone sounds.
Surface Burners
The burner bases and caps must be properly positioned before
cooking. Your range comes with 3 sizes of burners and caps. Each
round burner base is marked with letters indicating the burner size.
Align the burner bases as shown in the following illustration:
Align the gas tube opening in the burner base with the orice
holder on the cooktop and the igniter electrode with the notch
in the burner base.
A
B
C
E
A. Burner cap
B. Gas tube opening
C. Burner base
Each round burner cap is marked with letters indicating the burner
size. Place the burner caps on the appropriate burner bases.
AUX
Small cap (AUX)Medium cap (SR)Large cap (UR)
Burner caps should be level when properly positioned. If burner
caps are not properly positioned, surface burners will not light.
The burner cap should not rock or wobble when properly aligned.
D. Igniter electrode
E. Orice holder
SR
UR
A
BD
A. Small (AUX)
B. Large (UR)
C. Medium (SR)
D. Large (UR)
C
B
A. Incorrect
B. Correct
4
FEATURE GUIDE
This manual covers several models. Your model may have some or all of the items listed. Refer to this manual or Frequently Asked
Questions (FAQs) section of our website at www.whirlpool.com for more detailed instructions. In Canada, reference the Customer
Service section at www.whirlpool.ca.
WARNING
Food Poisoning Hazard
Do not let food sit in oven more than one hour before
or after cooking.
Doing so can result in food poisoning or sickness.
KEYPADFEATUREINSTRUCTIONS
OVEN LIGHTOven cavity
CLEAN
(on some models)
CONTROL LOCK
(Hold 3 Sec)
CLOCKClock
TIMER SET/OFFOven timer
BAKEBaking and
BROILBroiling
STARTCooking
light
Self-Cleaning
cycle
Oven control
lockout
roasting
start
While the oven door is closed, press OVEN LIGHT to turn the light on and off. The oven light will come
on when the oven door is opened. The oven light will not come on during the Self-Cleaning cycle.
See the “Self-Cleaning Cycle” section.
1. Check that the oven is OFF.
2. Press and hold the Control Lock keypad for 3 seconds.
3. A tone will sound and a lock will be displayed.
4. Repeat to unlock. No keypads will function with the controls locked.
The clock uses a 12-hour cycle.
1. Check that the oven is OFF.
2. Press CLOCK.
3. Press Temp/Time “up” or “down” arrow keypad to set the hours. Press CLOCK to switch
the minutes. Press Temp/Time “up” or “down” arrow keypad to set the minutes.
4. Press CLOCK or START.
The Timer can be set in hours or minutes up to 9 hours and 59 minutes.
1. Press TIMER SET/OFF.
2. Press Temp/Time “up” or “down” arrow keypad to set the length of time.
3. Press START to begin the countdown. If enabled, end-of-cycle tones will sound at end of countdown.
4. Press TIMER SET/OFF to cancel the Timer. Do not press the Cancel keypad because the oven
will turn off.
1. Press BAKE.
2. Press Temp/Time “up” or “down” arrow keypad until desired temperature is reached. A tone will
sound if the minimum or maximum temperature is reached.
3. Press START.
4. To change the temperature, repeat Step 2. Press START.
5. Press CANCEL when nished.
1. Press BROIL.
2. Press Temp/Time “up” or “down” arrow keypad until the desired temperature is reached.
A tone will sound if the minimum or maximum temperature is reached.
3. Press START. Preheat oven for 5 minutes.
4. Position cookware in oven and close the oven door.
5. To change the temperature, repeat Step 3. Press START.
6. Press CANCEL when nished.
The Start keypad begins any oven function. If Start is not pressed within 10 seconds, a tone will
sound and Start will blink until pressed or canceled. If Start is not pressed within 30 seconds after
pressing a keypad, the function is canceled and the time of day is displayed.
5
KEYPADFEATUREINSTRUCTIONS
FROZEN BAKEPrepackaged
food
DELAY Delayed start
COOK TIMETimed
cooking
KEEP WARMHold warm
CANCELRange
function
TEMP/TIMETemperature
and time
adjust
1. Position the food on a at rack in the oven on rack position 3. See the “Positioning Racks and
Bakeware” section.
NOTE: Cook only 1 package of frozen food at a time when using Frozen Bake™ Technology.
2. Press FROZEN BAKE LASAGNA or PIZZA.
3. Press the Temp/Time “up” or “down” arrow keypad to set the temperature as recommended on
the food packaging.
4. Press COOK TIME.
5. Press the Temp/Time “up” and “down” arrow keypads to set the maximum cook time as
recommended on the food packaging.
6. Press START. The range will calculate the best cook time based on the current oven temperature.
NOTE: The cook time that appears in the display is the estimated required cook time as
calculated by the oven control. It may be different than the time you entered. A beep will alert you
to check the food’s doneness with at least 2 minutes remaining on the timer. To add more time,
press the Temp/Time “up” arrow keypad and then press START.
7. Press START to start the calculated time.
8. At the end of the cook time, a beep will alert you to check the food’s doneness. To add more
time, press the Temp/Time “up” arrow keypad and then press START. Unless more time is
selected, the bake element turns off.
9. Press CANCEL when nished.
The Delay keypad is used to enter the starting time for an oven function with a delayed start. Delay
should not be used for foods such as breads and cakes because they may not bake properly.
To set a Timed Cook or a Delayed Timed Cook, see “Cook Time” section.
Timed Cooking allows the oven to be set to turn on at a certain time of day, cook for a set length
of time, and/or shut off automatically.
To set a Timed Cook or a Delayed Timed Cook, see “Cook Time” section.
Food must be at serving temperature before placing it in the warmed oven.
1. Press KEEP WARM.
2. Temperature is set at 170°F (75°C). Press the “up” and “down” arrow keypads until desired
temperature is reached. A tone will sound if the minimum or maximum temperature is reached.
3. Press START.
4. Press CANCEL when nished.
The Cancel keypad stops any function except the Timer and Control Lock.
The Temp/Time “up” and “down” arrow keypads are used to adjust time and temperature settings.
COOKTOP USE
WARNING
Fire Hazard
Do not let the burner flame extend beyond the edge of
the pan.
Turn off all controls when not cooking.
Failure to follow these instructions can result in death
or fire.
Electric igniters automatically light the surface burners when
control knobs are turned to IGNITE.
Before setting a control knob, place lled cookware on the
grate. Do not operate a burner using empty cookware or
without cookware on the grate.
6
To Set:
1. Push in and turn knob counterclockwise to IGNITE.
IMPORTANT: All 4 surface burners will click. Only the burner
with the control knob turned to IGNITE will produce a ame.
2. Turn knob to anywhere between HI and LO.
REMEMBER: When range is in use or (on some models)
during the Self-Cleaning cycle, the entire cooktop area may
become hot.
IMPORTANT: When cooktop is in use, the Self-Cleaning cycle will
be disabled. An error tone will sound and the Cooktop On indicator
light will ash. If you turn on the cooktop when the Self-Cleaning
cycle is in use, it will disable the Self-Cleaning cycle and “END” will
be displayed.
Power Failure
In case of prolonged power failure, the surface burners can
be lit manually. Hold a lit match near a burner and turn knob
counterclockwise to IGNITE. After the burner lights, turn knob
to setting.
Sealed Surface Burners
D
B
A
A
A
B
C
E
To Clean:
IMPORTANT: Before cleaning, make sure all controls are OFF and
the oven and cooktop are cool. Do not use oven cleaners, bleach,
or rust removers.
1. Remove the burner cap from the burner base and clean
according to “General Cleaning” section.
2. Clean the gas tube opening with a damp cloth.
3. Clean clogged burner ports with a straight pin as shown.
Do not enlarge or distort the port. Do not use a wooden
toothpick. If the burner needs to be adjusted, contact a
trained repair specialist.
A. Burner cap
B. Gas tube opening
C. Burner base
D. Igniter electrode
E. Orice holder
IMPORTANT: Do not obstruct the ow of combustion and
ventilation air around the burner grate edges.
Burner cap: Always keep the burner cap in place when using a
surface burner. A clean burner cap will help avoid poor ignition and
uneven ames. Always clean the burner cap after a spillover and
routinely remove and clean the caps according to the “General
Cleaning” section.
Alignment: Be sure to align the gas tube opening in the burner
base with the orice holder on the cooktop and the igniter
electrode with the notch in the burner base. Your range comes
with 3 sizes of burners and caps. Each round burner base is
marked with letters indicating the burner size.
Gas tube opening: Gas must ow freely throughout the gas
tube opening for the burner to light properly. Keep this area free
of soil and do not allow spills, food, cleaning agents, or any other
material to enter the gas tube opening. Keep spillovers out of the
gas tube by always using a burner cap.
A. 1-11/2" (2.5-3.8 cm)
B. Burner ports
Burner ports: Check burner ames occasionally for proper size
and shape as shown in the previous illustration. A good ame
is blue in color, not yellow. Keep this area free of soil and do not
allow spills, food, cleaning agents, or any other material to enter
the burner ports.
4. Each round burner cap is marked with letters indicating
the burner size. Replace the burner cap, making sure the
alignment pins are properly aligned with the burner cap.
B
A. Incorrect
B. Correct
AUX
Small (AUX)Medium (SR)Large (UR)
SR
UR
5. Turn on the burner. If the burner does not light, check cap
alignment. If the burner still does not light, do not service the
sealed burner yourself. Contact a trained repair specialist.
Burner Size
Select a burner that best ts your cookware. See the following
illustration and chart:
Small
(AUX)
Medium
(SR)
Large
(UR)
Large
(UR)
Burner SizeRecommended Use
Small
Medium
Large
■ Low-heat cooking
■ Melting chocolate or butter
■ Multipurpose burner
■ For large cookware
7
OVEN USE
The normal operation of the range will include several noises that
may be heard each time the bake or broil burners ignite during the
cooking cycle:
■ Gas valves may make a “popping” sound when opening
or closing.
■ Igniters will “click” several times until a ame is sensed.
■ A “poof” sound is heard when a bake or broil burner
ignites.
Odors and smoke are normal when the oven is used the rst few
times or when it is heavily soiled.
IMPORTANT: The health of some birds is extremely sensitive to
the fumes given off. Exposure to the fumes may result in death
to certain birds. Always move birds to another closed and wellventilated room.
Electronic Oven Controls
Control Display
The display will ash when powered up or after a power loss.
Press CANCEL to clear. When oven is not in use, the time of day
is displayed. Indicator lights show functions that are in use.
Tones
Tones are audible signals, indicating the following:
Basic Functions
One tone
■ Valid keypad press
■ Oven is preheated (long tone).
■ Function has been entered.
■ Reminder, repeating every 20 seconds after the end-of-
cycle tones
Three tones
■ Invalid keypad press
Four tones
■ End of cycle
Fahrenheit and Celsius
The temperature is preset at Fahrenheit but can be changed
to Celsius.
To change: Press and hold the Temp/Time “up” arrow keypad
for 5 seconds. “°C” or “°F” will appear on the display. Repeat to
change back.
To exit mode, press CANCEL.
Keypress Tones
Activates or turns off the tones when a keypad is pressed.
To change: Press and hold OVEN LIGHT for 5 seconds. Repeat to
change back.
To exit mode, press CANCEL.
Demo Mode
IMPORTANT: This feature is intended for use on the sales oor
with a 120V power connection and permits the control features
to be demonstrated without heating elements turning on. If this
feature is activated, the oven will not work.
To change: Press CANCEL, CANCEL, Temp/Time “up” arrow
keypad, TIMER SET/OFF. Repeat to change back and end Demo
mode.
8
Oven Temperature Control
IMPORTANT: Do not use a thermometer to measure oven
temperature. Elements will cycle on and off as needed to provide
consistent temperature but may run slightly hot or cool at any
point in time due to this cycling. Most thermometers are slow
to react to temperature change and will not provide an accurate
reading due to this cycling.
The oven provides accurate temperatures; however, it may cook
faster or slower than your previous oven, so the temperature can
be adjusted to personalize it for your cooking needs. It can be
changed in Fahrenheit or Celsius.
To Adjust Oven Temperature:
1. Press and hold the “down” arrow keypad for 5 seconds until
the oven display shows the current setting, for example “0°F
CAL” or “00.”
2. Press the Temp/Time “up” or “down” arrow keypad to increase
or to decrease the temperature in 5°F (3°C) amounts. The
adjustment can be set between 30°F (18°C) and -30°F (-18°C).
3. Press START.
Sabbath Mode
(on some models)
The Sabbath mode sets the oven to remain ON in a bake setting
until turned off. A Timed Bake can also be set to keep the oven
ON for only part of the Sabbath. The Oven Control Lockout feature
(if present) will be disabled during the Sabbath mode. After the
Sabbath mode is set, no tones will sound, the display will not
show the temperature, the Kitchen Timer mode will be canceled
(if active), and only the following keypads will function:
■ Temp/Time “up” and “down” arrow keypads
■ Cancel
When the oven door is opened or closed, the oven light will not
turn on or off and the heating elements will not turn on or off
immediately.
When power is restored after a power failure, the oven will return
to Sabbath mode and remain Sabbath compliant with the bake
elements off until the Cancel keypad is pressed.
Pressing the Cancel keypad at any time cancels the cooking cycle
and returns the oven to the normal cooking mode (not Sabbath
compliant).
Before entering the Sabbath mode, it must be decided if the oven
light is to be ON or OFF for the entire Sabbath mode period. If
the light is ON when entering Sabbath mode, it will remain ON for
the entire time Sabbath mode is in use. If the light is OFF when
entering Sabbath mode, it will remain OFF for the entire time
Sabbath mode is in use. Opening the oven door or pressing the
Oven Light keypad will not affect the oven light once Sabbath
mode has been entered.
On the Holiday, the oven temperature can be changed once the
oven is in Sabbath mode by pressing the Temp/Time “up” or
“down” arrow keypad. The oven temperature will change 25°F
(14°C) each time the Temp/Time “up” and “down” arrow keypads
are pressed. Press START to activate the new temperature. The
display will not change and there will be no sounds during this
adjustment.
To Bake Using Sabbath Mode:
1. Press BAKE.
2. To change the temperature, press the Temp/Time “up” or
“down” arrow keypad.
3. Press START.
4. Press and hold the TIMER SET/OFF for 5 seconds. “SAb” will
ash in the display.
5. Press START while “SAb” is ashing to enter Sabbath mode;
otherwise, the entire cycle cancels out. “SAb” will stop ashing
and remain on in the display. The oven is now in Sabbath
mode and is Sabbath compliant.
Pressing the Cancel keypad at any time cancels the cooking cycle
and returns the oven to the normal cooking mode (not Sabbath
compliant).
To Set a Timed Bake Using Sabbath Mode
(on some models):
1. Press BAKE.
2. Press the Temp/Time “up” or “down” arrow keypad to enter
a temperature other than the one displayed.
3. Press COOK TIME. The Cook Time oven indicator light will
light up.
4. Press the Temp/Time “up” or “down” arrow keypad to enter
a cook time length.
5. Press START.
6. Press and hold the Timer Set/Off keypad for 5 seconds.
“SAb” will ash in the display.
7. Press START while “SAb” is ashing to enter Sabbath mode;
otherwise, the entire cycle cancels out. “SAb” will stop ashing
and remain on in the display. The oven is now in Sabbath
mode and is Sabbath compliant. The Bake, On, and Cook
Time indicator lights will be displayed.
The temperature and/or cook time settings can be changed
anytime after the oven turns on by repeating steps 2 through 5.
To cancel the current delay time and enter a different delay time,
press CANCEL and repeat steps 1 through 7.
When the set cook time ends, the oven will shut off automatically
and the indicator lights will turn off, indicating the end of the cycle.
Pressing the Cancel keypad at any time cancels the cooking cycle
and returns the oven to the normal cooking mode (not Sabbath
mode compliant).
To Set a Delayed Timed Bake Using Sabbath Mode
(on some models):
WARNING
Food Poisoning Hazard
Do not let food sit in oven more than one hour before
or after cooking.
Doing so can result in food poisoning or sickness.
1. Press BAKE.
2. Press the Temp/Time “up” or “down” arrow keypad to enter
a temperature other than the one displayed.
3. Press COOK TIME. The Cook Time oven indicator light will
light up.
4. Press the Temp/Time “up” or “down” arrow keypad to enter
a cook time length.
5. Press DELAY. The Delay indicator light will light up.
6. Press the Temp/Time “up” or “down” arrow keypad to enter
a start time.
7. Press START.
8. Press and hold the Timer Set/Off keypad for 5 seconds.
“SAb” will ash in the display.
9. Press BAKE while “SAb” is ashing to enter Sabbath mode;
otherwise, the entire cycle cancels out. “SAb” will stop ashing
and remain on in the display. The oven is now in Sabbath
mode and is Sabbath compliant. The Delay indicator light will
be displayed.
When the start time is reached the Bake, On, and Cook Time
indicator lights will automatically turn on. When the set cook time
ends, the oven will shut off automatically and the indicator lights
will turn off, indicating the end of the cycle.
Pressing the Cancel keypad at any time returns the oven to the
normal cooking mode (not Sabbath mode compliant).
Keep Warm
WARNING
Food Poisoning Hazard
Do not let food sit in oven more than one hour before
or after cooking.
Doing so can result in food poisoning or sickness.
IMPORTANT: Food must be at serving temperature before placing
it in the warmed oven. Food may be held up to 1 hour; however,
breads and casseroles may become too dry if left in the oven
during the Keep Warm function. For best results, cover food.
The Keep Warm feature allows hot cooked foods to stay at serving
temperature.
To Use:
1. Press KEEP WARM.
2. Press Temp/Time “up” or “down” arrow keypad until desired
temperature is reached. A tone will sound if the minimum
or maximum temperature is reached.
3. Press START.
4. Place food in the oven.
5. Press CANCEL when nished.
NOTE: The temperature may be changed at any time by pressing
the Temp/Time “up” or “down” arrow keypad to the desired
temperature and then START.
Aluminum Foil
IMPORTANT: To avoid permanent damage to the oven bottom
nish, do not line the oven bottom with any type of foil or liner.
For best cooking results, do not cover entire oven rack with foil
because air must be able to move freely.
Positioning Racks and Bakeware
IMPORTANT: To avoid permanent damage to the porcelain nish,
do not place food or bakeware directly on the oven door or bottom.
Bakeware
To cook food evenly, hot air must be able to circulate. Allow
2" (5 cm) of space around bakeware and oven walls. Make
sure that no bakeware piece is directly over another.
Racks
■ Position racks before turning on the oven.
■ Do not move racks with bakeware on them.
■ Make sure racks are level.
9
To move a rack, pull it out to the stop position, raise the front edge,
A
WARNING
and then lift out. Use the following illustration as a guide.
5
4
3
2
1
6
Rack Positions
Rack 5: 2-rack baking and broiling
Rack 4: Broiling and toasting
Rack 3: Most baked goods on a cookie sheet, jellyroll pan, or
mufn pan; casseroles; frozen convenience foods
Rack 2: Roasting small cuts of meat and poultry, pies, bundt and
angel food cakes, yeast bread, quick breads, and 2-rack baking
Rack 1: Roasting large cuts of meat and poultry
Rack 6: Extra-large items
Multiple Rack Cooking
2-rack: Rack positions 2 and 4 or 2 and 5
Baking Layer Cakes on 2 Racks
For best results when baking cakes on 2 racks, use racks 2 and
4 for baking. Place the cakes on the racks, as shown.
Broiling
When broiling, preheat the oven for 5 minutes before putting food
in unless recommended otherwise in the recipe. Position food on
grid in a broiler pan, then place it in the center of the oven rack.
IMPORTANT: Close the door to ensure proper broiling temperature.
Changing the temperature when custom broiling allows more
precise control when cooking. The lower the broil setting is, the
slower the cooking. Thicker cuts and unevenly shaped pieces of
meat, sh, and poultry may cook better at lower broil settings.
Use rack 4 or 5 for broiling. Refer to the “Positioning Racks and
Bakeware” section for more information.
■ For best results, use a broiler pan and grid. It is designed
to drain juices and help avoid spatter and smoke.
If you would like to purchase a broiler pan, one may be ordered.
Please refer to the “Accessories” section for more information.
NOTE: Odors and smoke are normal the rst few times the oven
is used or if the oven is heavily soiled.
Cook Time
Food Poisoning Hazard
Do not let food sit in oven more than one hour before
or after cooking.
Doing so can result in food poisoning or sickness.
Oven Vent
A. Oven vent
The oven vent releases hot air and moisture from the oven and
should not be blocked or covered. Blocking or covering the oven
vent will cause poor air circulation, affecting cooking and cleaning
results. Do not set plastics, paper, or other items that could melt or
burn near the oven vent.
Baking and Roasting
The bake and broil burners cycle on and off in intervals. This
feature is automatically activated when the oven is in use.
Before baking and roasting, position racks according to
“Positioning Racks and Bakeware” section. When roasting, it is
not necessary to wait for the oven preheat cycle to end before
putting food in unless it is recommended in the recipe.
Preheating
When Start is pressed, the oven will begin preheating. Once
100ºF (38ºC) is reached, the display temperature will increase as
the actual temperature of the oven increases. When the preheat
temperature is reached, a tone will sound and the selected
temperature will appear on the display.
To Set a Timed Cook:
1. Press BAKE. The Bake indicator light will light up.
2. Press the Temp/Time “up” or “down” arrow keypad to enter a
temperature other than the one displayed.
3. Press COOK TIME. The cook time oven indicator light will
light up.
4. Press the Temp/Time “up” or “down” arrow keypad to enter
the length of time to cook.
5. Press START. The display will count down the time. When the
time ends, the oven will shut off automatically.
6. Press CANCEL to clear the display.
To Set a Delayed Timed Cook:
Before setting, make sure the clock is set to the correct time
of day. See the “Clock” keypad feature in the “Feature Guide”
section.
1. Press BAKE.
2. Press the Temp/Time “up” or “down” arrow keypad to enter
a temperature other than the one displayed.
3. Press COOK TIME. The cook time oven indicator light will
light up.
4. Press Temp/Time “up” or “down” arrow keypad to enter
the length of time to cook.
5. Press DELAY. The delay oven hour indicator will light up.
6. Press Temp/Time “up” or “down” arrow keypad to enter
the hour of day to start.
7. Press DELAY. The delay oven minute will light up.
8. Press Temp/Time “up” or “down” arrow keypad to change
the minute.
9. Press START.
When the start time is reached, the oven will automatically turn
on. The temperature and/or time settings can be changed anytime
after pressing Start by repeating steps 1 through 7. When the set
cook time ends, the oven will shut off automatically.
10. Press CANCEL to clear the display.
10
RANGE CARE
Self-Cleaning Cycle (on some models)
WARNING
Burn Hazard
Do not touch the oven during the Self-Cleaning cycle.
Keep children away from oven during
Self-Cleaning cycle.
Failure to follow these instructions can result in burns.
IMPORTANT: The health of some birds is extremely sensitive to
the fumes given off during the Self-Cleaning cycle. Exposure to the
fumes may result in death to certain birds. Always move birds to
another closed and well-ventilated room.
Do not block the oven vent during the Self-Cleaning cycle. Air
must be able to move freely. Depending on your model, see the
“Oven Vent” section.
Do not clean, rub, damage, or move the oven door gasket.
Prepare Range
■ Remove the broiler pan, grid, cookware and bakeware, all
cooking utensils, oven racks and aluminum foil and, on some
models, the temperature probe from the oven.
■ Use a damp cloth to clean inside door edge and the 1½"
(3.8 cm) area around the inside oven cavity frame, being
certain not to move or bend the gasket.
■ Remove plastic items from the cooktop because they
may melt.
■ Remove all items from the storage drawer.
How the Cycle Works
IMPORTANT: The heating and cooling of porcelain on steel in the
oven may result in discoloring, loss of gloss, hairline cracks, and
popping sounds.
Before cleaning, make sure the door is completely closed or the
door will not lock and the Self-Cleaning cycle will not begin.
Once the oven has completely cooled, remove ash with a damp
cloth. To avoid breaking the glass, do not apply a cool damp cloth
to the inner door glass before it has completely cooled.
To stop the Self-Cleaning cycle at any time, press the Cancel
button on the keypad. If the temperature is too high, the oven door
will remain locked and “cool” and “locked” will be displayed. The
cooling fan may continue to run.
Once the self-cleaning temperature has been reached, the
electronic control requires a 12-hour delay before another SelfCleaning cycle can be started.
The oven light will not function during the Self-Cleaning cycle.
Electronic Oven Control with Adjustable Clean Time
(on some models)
The Self-Cleaning cycle is time adjustable between 2 hours
30 minutes and 4 hours 30 minutes in 30-minute increments.
The suggested clean times are 2 hours 30 minutes for light soil
and 4 hours 30 minutes for heavy soil.
IMPORTANT: When cooktop is in use, the Self-Cleaning cycle
will be disabled. An error tone will sound and the Cooktop On
indicator light will ash. If you turn on the cooktop when the SelfCleaning cycle is in use, it will disable the Self-Cleaning cycle and
“END” will be displayed.
To Self-Clean:
1. Press CLEAN.
2. Press the Temp/Time “up” or “down” arrow keypad to enter
the desired Self-Cleaning cycle time.
3. Press START.
The oven door will automatically lock. The Door Locked and
Clean indicator lights will be displayed. The time remaining will
also be displayed.
4. When the Self-Cleaning cycle is complete and the oven cools,
the Door Locked and Clean indicator lights will turn off.
5. When the oven is completely cooled, remove ash with a
damp cloth.
To exit the Self-Cleaning cycle before completed, press
CANCEL. The door will unlock once the oven cools.
11
Loading...
+ 25 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.