Whirlpool WBC3546 A FCX, KGN340 PROFRESH A IN, WBC3546 FCX, WBC3546 A FCW PROGRAM CHART

Your new appliance is a combined ventilated, fridge­freezer exclusively for domestic use. Fridge-freezers
provide, circulate chilled air around the storage areas,
holding the right humidity level, food hydration in the
fridge to keep the long freshness of food products and
prevent the formation of ice, thereby completely
eliminating the need for defrosting. Frozen items don't
stick to the walls, labelling stays legible and storage space
remains neat and clear. No Frost temperature and
humidity controls helps to keep food fresher for longer. In
combination with , not only does it control the
sensor, but directs the cooling power exactly where it is
needed, optimising energy efficiency.

A. Refrigerator Compartment

1. Multi-flow cold air system
1a. Light bulbs
1c. Light cover
1d. Multi-flow cold air vent

2. Shelves / Shelf area

3. Cooler compartment (temperature lower than in the

refrigerator compartment)

4. Rating plate with commercial name

6. Crisper divider

7. Reversibility kit

8. Egg tray

9. Separator

10. Door trays

B. Freezer Compartment

11. Storage baskets for frozen food items

12. Shelves

13. Middle basket (freezing zone)

14. Ice tray and/or cold accumulator

16. Freezer compartment door trays (for pizza or other

frozen product with a short time)
Depending on the model the number and type of
accessories may vary. The freezer compartment can be
used without the two upper baskets to increase storage
for large products. The lower basket must not be
removed. Place the food products directly on the racks.
After inserting food, ensure that the freezer compartment
door closes properly.

C. Control panel and display
Anti-bacterial protection:
1b. Filter grille, air intake area

5. Crisper with antibacterial additives (depending
on the model)

15. Door seals

The crisper and the door seals are manufactured from

materials that inhibit bacterial growth.

Notes:

- In case of power failure the cold accumulator helps

to keep optimal storage temperature longer.

- All shelves and door trays are removable.

- The internal temperatures of the appliance depend

on the ambient temperature, frequency of opening the
doors, as well as location of the appliance. Temperature
setting must consider these factors.

- The appliance accessories are not suitable for washing

in a dishwasher.
The fan helps to achieve a better temperature
distribution inside the refrigerator compartment, and
optimizes food storage conditions. The fan is turned on
and off automatically by an electronic system.

Important:
DO NOT obstruct the air intake area with food
items.
The fan ONLY runs if the compressor is working.

If the appliance has the fan it can be equipped with the filter.
Remove it from the box found in the crisper drawer (item

5) and insert into the grille (item 1b).

The replacement procedure is attached with the filter.

CONTROL PANEL DESCRIPTION

Compartments ON/OFF, menu, selection and
confirmation buttons

1. Refrigerator compartment Stand-by button

2. Menu button

3. Appliance ON/OFF button

4. Selected compartment temperature increase button

5. Confirmation button

6. Selected compartment temperature decrease button.

Switching on the appliance: Press & hold for 3 sec. the

"On-Off" button to activate freezer compartment and
then press & hold for 3 sec. the " fridge stand-by" button
to activate refrigerator compartment.
Switching off the appliance: Press & hold for 3 sec. the
"On-Off" button again

Adjusting the temperature: To change the temperature
inside the refrigerator or freezer compartment, press the
Menu button until the refrigerator or freezer temperature
symbol flashes).

ROBGRUSHSKCZPLIGB FINDKNSGRPENLFD

PRODUCT SHEET

GB

Then adjust the temperature by pressing the +/- buttons
and confirm by pressing "OK".

Displaying the refrigerator and freezer
compartment temperatures.

The temperature inside the refrigerator compartment can
be adjusted between +2°C and + 8°C. In the same way,
the freezer compartment temperature can be adjusted
between -16°C and -24°C.

ELECTRICAL CONNECTION

When the appliance is connected to the power supply, the
display lights up and all the symbols appear on the display
for a few seconds.
The freezer factory setting -18°C appears and flashes,
while the refrigerator display shows a temperature of
+5°C (factory-set).
While the appliance is working to reach the factory-set
temperature, an acoustic alarm sounds and temperature
symbol on the freezer display flashes (- -). This indicates
that the appliance has not yet reached the optimal
temperature for storage of foodstuffs.
Press and hold the button "OK" until the acoustic alarm
disables.
The icon disappears when the freezer compartment
reaches a temperature below -12°C, the display will show
the temperature -18°C.
After being switched on, the refrigerator needs from 2 to
3 hours to reach the correct temperature to store a
typical volume of food in the refrigerator compartment.

Important:

• If food is placed in the refrigerator before the appliance
has cooled completely, it may deteriorate.

• Turning the refrigerator and freezer controls to a cooler
than recommended setting will not cool the
compartments any faster.

• A built-in exterior moisture control continuously guards
against moisture build-up on the front edges.

Do not be alarmed if these edges sometimes feel warm to
the touch.
The inside light switches on when the refrigerator door is
opened. After 10 minutes of door opening the light
switches off.

GUIDE TO SELECTING FUNCTIONS

Functions are not available until freezer compartment
reaches the temperature below -12°C.

Functions and settings for the refrigerator
compartment.

Refrigerator compartment door open

Refrigerator compartment temperature setting

Vacation

This function turns the refrigerator compartment to
a warmer state if you are going away for some time.

To select the function, keep pressing the menu
button until the display shows the vacation symbol.
Press "OK" to confirm. To turn the refrigerator back
to setting point repeat this procedure.
Important: after activating this function, remove all
perishable foodstuffs from the refrigerator
compartment and leave the door closed, since the
refrigerator maintains a suitable temperature to
prevent the formation of unpleasant odours.

ON/OFF

This function turns off both the refrigerator and
freezer compartments.
To enable the stand-by function, press & hold the
"On-Off" button for 3 seconds, two hyphens appear
on both display to indicate that the appliance is in
stand-by. To switch the appliance on again, follow
the same procedure until the previously set
temperature is shown on the display. When the
appliance is in stand-by the light inside the
refrigerator compartment does not work.
Remember that this operation does not disconnect
the appliance from the power supply.

Fridge Stand-by

This function turns off the fridge compartment
while the freezer compartment continue to run.
To enable the stand-by function, press & hold the
"Fridge stand-by" button for 3 seconds. To switch
the fridge compartment on again, follow the same
procedure until the previously set temperature is
shown on the display. When the fridge
compartment is in standby the light inside the
refrigerator compartment does not work.

Functions and settings for the freezer compartment

Freezer compartment temperature setting

Fast freezing

For more efficient freezing activate this function 24
hours before freezing fresh food. To select the
function, keep pressing the menu button until the
display shows the fast freeze symbol .
Press "OK" to confirm.
After 24 hours place the food to be frozen in the
middle basket of freezer compartment.
The function is automatically disabled after 48
hours, or can be manually disabled by repeating the
same procedure.

Party mode

To select the function, keep pressing the menu
button until the display shows the party mode
symbol .
The symbol flashes, press "OK" to confirm. Use this
function to chill drinks inside the freezer compartment.

ROBGRUSHSKCZPLFINDKNSGRIPENLFGBD

PRODUCT SHEET

GB