Whirlpool WA UNIQ 714 HF, WA BLACK 714 BW BK, WA SILVER 714 BW BK INSTRUCTION FOR USE
40105537GB.fm Page 1 Monday, May 17, 2010 6:08 PM
GB PROGRAMME CHART
A. “Door open” indication
This washing machine is equipped with
automatic safety functions which detect and
diagnose faults at an early stage and react
appropriately, e.g.:
B. “Service” indication
C. “Water tap closed” indication
D. “Clean pump” indication
Tempe-
Programme
Mixed
Cotton
Synthetics
Delicates
Fabrics
Wool/Handwash
Jeans
White
Light colours
❉
:
1)
Colours
Eco
Dark
Super Eco
Aqua Eco
Speed 15
Eco Cotton
Rinse & Spin
optional / Yes : dosing required
For improved garment care, spin speed is restricted in this programme.
Mix
Koch / Bunt
Pflegeleicht
Fein
Wolle/Hand
Jeans
Weiße Wäsche
Helle Farben
Schwarz&Dunkel
Super Eco
Aqua Eco
Kurz 15’
Baumwolle Eco
Spülen&Schleudern
rature
20 - 60 °C 6.0
20 - 95 °C 7.0
20 - 60 °C 3.5
20 - 40 °C 2.5
20 - 40 °C 2.0
20 - 60 °C 7.0
20 - 60 °C 7.0
20 - 60 °C 5.5
20 - 60 °C 5.0
20 - 60 °C 7.0
20 - 40 °C 3.0
20 - 30 °C 3.0
60 °C 7.0
——
Care
Labels
J
M
}
L
K
Max.
Load
kg
Slightly to normally soiled robust laundry made of cotton, linen, artificial fibres and their blends.
Effective one-hour program. Make sure to wash only similar colours together in one wash load. If soil level requires, add
oxygen-based stain removers.
Normally to heavily soiled towels, underwear, table and bed linen etc. made of cotton and linen.
Normally soiled blouses, shirts, overalls, etc. made of polyester (Diolen, Trevira), polyamide (Perlon, Nylon)
or blends with cotton.
Curtains and delicate clothing, dresses, skirts, shirts and blouses.
Woollens, labelled with the Woolmark and identified as machine washable, as well as textiles made of silk,
linen, wool and viscose marked as handwashable.
This programme is tested and approved by The Woolmark Company for machine- and handwashable wool.
Select spin speed according to the manufacturer’s recommendations on the care label.
Normally soiled cotton jeanswear and garments made of robust jeanslike material such as trousers and jackets.
Normally to heavily soiled and robust white cotton laundry.
Save energy by selecting a lower wash temperature and adding an oxygen-based bleach product, in addition to your detergent.
White and pastel shaded garments made of delicate fabrics.
Gentle wash program to avoid graying or yellowing of your laundry. Use heavy duty detergent, if necessary also stain
removers or bleaches on oxygen basis. Do not use liquid detergent.
Black and dark garments made of cotton, cotton blends and polyester.
Special program to reduce colour fading and local discolouration. Prefer to use a liquid detergent for dark garments with
this program.
Normally to heavily soiled and robust underwear, table and bed linen, towels and shirts made of cotton and linen.
Offers highest economy in energy consumption by prolonged washing duration. Ideal to be run overnight to additionally
profit from the more favourable energy rates. To avoid noise of spinning at night, set spin speed to “0” and start spin
programme in the morning, or define programme start with “Start delay” accordingly.
Lightly soiled laundry made of synthetic fibres, or synthetics mixed with cotton garments.
Saving programme with a very low water consumption. Use liquid detergent and the lowest recommended amount for
3kg laundry. Do not use softener.
Briefly worn outer clothing made of cotton, artificial fibers and blends with cotton.
Refresh program. Use lowest recommended detergent amount.
Heavily soiled and robust laundry washable at 60°C such as bed linen, table linen towels etc.
The extended programme duration enables economic energy and water consumption while maintaining good washing results.
Rinse and intensive spin programme.
7.0
Same as the last rinse and the final spin in the “Cotton” programme.
- Respect the manufacturer’s recommendations on the care label
The Wool/Handwash cycle has been tested and approved and approved by The Woolmark Company for the washing of
Woolmark garments labelled as “machine wash” or “hand wash” provided that the garments are washed according to the
instructions on the garment label and those issued in this programme chart. M0702
Type of wa s h / N o t e s
C
D
H
}
E. Programme selector
F. “Start (Pause)” button
A
G. “Spin” button
B
H. Programme sequence indicator
I
I. “Reset/Drain” button
J. “Start delay” button
K. “Temperature” button
E FG
L. “Child lock” button combination
M. “Detergent overdosage” indication
Detergents and additives Special options
Pre-
Main
wash
wash
Yes
—
Yes
❉
Yes
❉
Yes
❉
Yes
—
Yes
❉
Yes
—
Yes
—
Yes
—
Yes
—
Yes
—
Yes
—
Yes
—
——
Softener Clean+
❉
❉❉❉❉❉❉❉❉
❉❉❉❉❉❉❉❉
❉
❉
❉❉❉❉
❉❉❉
❉
❉
❉
——
❉
❉
❉
Clean+
—
—
—
—
—
—
—
—
—
Start
delay
Start-
vorwahl
❉
❉❉
❉
❉
❉
❉
❉
❉
❉
❉
Pre-
wash
Vor-
wäsche
—
Intensive
Intensiv-
Easy
rinse
ironing
Leicht-
spülen
bügeln
❉❉❉❉
——
—— —
——
—— —
—— —
—
—
—
❉
—
❉
—— —
—— —
—
—
—
❉
—
❉
5019 401 05537
Rinse
Spin
hold
Schleu-
Spül-
dern
stopp
❉❉
❉❉
❉❉
❉❉
❉❉
❉❉
❉❉
❉❉
❉❉
❉❉
❉❉
Max.
Spin
Speed
rpm
max.
max.
max.
1000
1000
max.
max.
1000
1000
max.
max.
max.
max.
max.
1)
1)
1)
1)
Black process 45.0° 150.0 LPI
40105537GB.fm Page 2 Monday, May 17, 2010 6:08 PM
The Sensor Technology automatically adapts Programme Time, Water and Energy consumption to the size of your wash load.
CONSUMPTION DATA
Programme
Mixed 40 6.0 73 0.60 1:00
Cotton 95 7.0 74
Cotton 60 7.0 54 1.19 2:20
Cotton 40 7.0 77 0.75 2:05
Synthetics 60 3.5 46
Synthetics 40 3.5 42 0.50 1:20
Delicates 30 2.5 60 0.40 0:45
Wool/Handwash 40 2.0 45 0.60 0:40
Jeans 40 7.0 86 0.75 2:21
White 40 7.0 69 0.85 2:20
Light colours 40 5.5 70 0.50 1:20
Dark 40 5.0 45 0.60 1:40
Super Eco 60 7.0 69 0.84 4:00
Aqua Eco 40 3.0 19 0.45 1:00
Speed 15 30 3.0 30 0.20 0:15
Consumption values were measured in normalized conditions in compliance with Standard IEC/EN 60 456. Consumption data in the home may vary with respect
to the values in the table in relation to the water supply pressure and temperature, the load and the type of wash.
* The time indicated on the display can deviate from the values in the table, because it takes into account the operation conditions applicable at that time.
** To reduce the water temperature, some cold water is added at the end of the main wash cycle, before the pump drains the water out.
*** Reference Programme for Energy Label (with separa tor in detergent dis penser rem oved for use of powder deterg ent).
Eco Cotton
***
Tem p e rat u r e
(°C)
60 7.0 54 0.91 4:00
ADD DETERGENTS, CLOSE THE DOOR
AND SELECT THE PROGRAMME
Load your laundry, close the door properly and add detergent as
indicated on the front page and as described in the chapter “Detergent
and Additives” in your Instructions for Use (remove separator in
detergent dispenser for use of powder detergent if necessary).
1. Turn the
2. The
3. The indication lamp of the predefined
programme selector
display shows the programme duration in hours and minutes as well as
the predefined temperature. The
temperature
“Temperature” button.
case you want to set another spin speed, press the “Spin”
button .
to the desired programme. The
can be altered by pressing the
“Start (Pause)”
button blinks.
spin speed
lights up. In
SELECT ANY DESIRED OPTION
Push the button(s) of any option(s) desired - the respective
indication lights up.
When the combination of programme and option is not possible,
the lights switch off automatically. Unsuitable combinations of
options are deselected automatically.
“Clean +” button
• C hoose this option if you use an in-wash additive for stain removal
(powder , fo r example “Vanish”) - it will optimize the additive’s
efficiency to get better wash performance and stain removal.
• C hoose temperature of 30 or 40°C and use with maximum load.
• Add an appropriate amount of in-wash additive for stain
removal (powder) to the main wash chamber, together with
your detergent (only use powder detergent with this option).
Respect the manufacturer’s dosing instructions.
• Prolongs the programme by approx. 10 to 15 minutes.
• Appropriate for use of stain removers and bleaches on oxygen
basis.
Chlorine or perborate bleaches must not be used!
Load
Water
(kg)
“Prewash” button
• Only for heavily soiled loads (for example sand, granular dirt).
Increases the cycle time by approximately 15 min.
• Do not use liquid detergent for the main wash when activating
the Prewash option.
“Intensive rinse” button
• More water is added and rinse cycle is prolonged.
• This option is particularly suitable for areas with very soft
water, washing baby linen and helping people with allergies.
“Easy ironing” button
• Reduces creasing by an increased water quantity and a very
gentle spin.
“Rinse hold” button
• Press the button if you want to postpone spinning to a later
time or if you want to drain only.
• The laundry will remain in the last rinse water without
progressing to the final spin cycle to avoid creasing and prevent
colours from changing.
• Do not leave the laundry to soak in the “Rinse hold” for too long.
• The washing machine stops to rinse hold as soon as the “Rinse
hold” light in the programme sequence indicator blinks. The
“Start (Pause)”
To terminate the “Rinse hold”:
• If you want to drain only without spinning: Press the
(Pause)”
• If you want to spin your laundry: Press the “Spin” button
to select the desired spin speed and then
start the spin cycle.
“Spin” button
• Every programme has a predefined spin speed.
• Press the button to set another spin speed.
• If you select spin speed “0”, the final spinning is cancelled but
intermediate spin peaks remain during rinse. The water is
drained out only.
Energy
(l)
(kWh)
2.10 2:10
**
0.85 1:35
**
button to start the drain process.
Approx. Programme Duration
button also blinks.
(hours : minutes)
“Start (Pause)”
*
“Start
to
START DELAY
The “Start delay” allows to run the machine at the consumer’s
convenience, for example at night when electricity is cheaper. Do
not use liquid detergent when activating the “Start delay”.
• Select programme, temperature and options.
• Press the “Start delay” button to select a delay time up to 23
hours. The light of the
•Press the
• As soon as the programme starts, the start delay on the display
• Once having pressed the
To cancel the “Start delay”
...before you press “Start (Pause)” :
• Turn the programme selector to another position or press the
...after having pressed “Start (Pause)” :
•Press
“Start (Pause)”
delay time begins. The light of the
stops blinking and is on. The light of the start delay button will
keep blinking until the programme starts.
is replaced by the remaining programme time, and the light of
the “Start delay” button goes off.
number of hours preselected can be changed by pressing and
holding the “Start delay” button.
“Reset/Drain”
“Start (Pause)”
the display. Press
selected programme immediately.
“Start (Pause)”
button . The countdown of the
“Start (Pause)”
button .
- the delay time disappears from
“Start (Pause)”
button blinks.
“Start (Pause)”
button , the
again to start the
button
PROGR AMME START
Open the tap and press
is on. The programme sequence indicator shows the current programme
phase, running from left to right through Wash, Rinse, Spin/Drain.
The display shows the remaining programme time. Due to
variations in load and temperature of inlet water, the remaining
time is newly calculated in certain programme phases. If this is the
case,
an animation appears on the display
“Start (Pause)”
. The light stops blinking and
.
CHILD LOCK
Activating the child lock prevents children from starting a wash
cycle or changing the settings of a running programme. The child
lock cannot be activated or deactivated when the programme
selector is in the “Off/O” position. To activate the child lock:
• Turn the programme selector to a programme position, or run
a programme as usual.
• Press the 2 buttons marked with the key symbol
simultaneously for at least 3 seconds. A key-like symbol will shortly
appear on the display to indicate that the child lock is active.
Any time you try to change a programme setting with active child
lock, the display will shortly show the key-like symbol. The
programme setting cannot be changed anymore. The only change
possible is to switch the washer off by turning the programme
selector to the “Off/O” position. To deactivate the child lock:
• Press again the 2 buttons marked with the key symbol
simultaneously for at least 3 seconds.
“DOOR OPEN” INDICATION
Before starting and after end of a programme, the lamp lights to show
that the door can be opened. As long as a wash programme is running,
the door remains locked and must on no account be forced open. In
case you have an urgent need to open it during a running programme,
refer to “Reset a running programme before the end”.
RED INDICATIONS
“Service”
Lighting up of the “Service” indication can be caused by a fault in an
electrical component. Refer to the “Troubleshooting Guide” in your
Instructions for Use. If the fault persists, contact our After Sales Service.
“Water tap closed”
The appliance has no or insufficient water supply. Open the water
tap. If the indication still lights up, refer to the “Troubleshooting
Guide” in the Instructions for Use.
“Clean pump”
Waste water is not pumped out. Check whether the drain hose is
kinked or the filter must be cleaned. In the latter case refer to the
Instructions for Use (“Removing the Filter”).
PROGRAMME END
• The display shows “End” and the “Door open” indication lights.
1. Turn the programme selector to the “Off/O” position.
2. Close the water tap.
3. Open the door and unload the machine.
• Leave the door ajar to allow the drum to dry.
DETERGENT OVERDOSAGE INDICA TION
In case you used too much detergent, a small vertical bar will light
next to the overdosage symbol on the right of the display when
the wash programme is finished. Use less detergent next time. Too
much foam by detergent overdosing can also lead to interruption
of a wash cycle. In this case the display shows “Fod” - follow the
recommendations in the “Troubleshooting Guide” in your
Instructions for Use to solve the problem.
CHANGE PROGRAMME AND/OR OPTIONS
AFTER PROGRAMME START
1. Press
2. Select the new programme, temperature, any options and
3. Press
“Start (Pause)”
light blinks.
another spin speed if you want.
“Start (Pause)”
continues at the same position where the previous programme was
interrupted. Do not add detergent for this programme.
to pause the programme. The
again. The light is on, and the programme
RESET A RUNNING PROGRAMME BEFORE
THE END
The
“Reset/Drain”
the end.
•Press the
seconds. “rES” appears on the display. The water is drained
out. It may last some time until the door can be opened.
button cancels a programme before
“Reset/Drain”
button for at least 3
5019 401 05537
Black process 45.0° 150.0 LPI
Loading...