Whirlpool WAT PURE 42 FLD, WAT PURE 40 FLD INSTRUCTION FOR USE

GB

A. Programme selector
B. Option buttons
C. “Favourite” button
D. “Temperature” button
E. “Start delay” button
F. “Variable spin” button
G. “Start” button
H. “Reset” button
I. Display

Programme

White Cotton /

Hygienic+

Cotton Buntwäsche

Synthetics Pflegeleicht

Kochwäsche /

Hygiene+

Max.

Tempe-

rature

Care

Labels

Load

kg

70 - 95°C 6.0

20 - 60°C 6.0

20 - 60°C 3.0

PROGRAMME CHART

K

L M

I

B

- for temperature selection, respect the manufacturer's recommendations on the care

Normally to heavily soiled bed linen, table linen and underwear, towels, shirts etc. made
of cotton and linen.
At a temperature of 80ºC or more, this programme eliminates bacteria, ensuring
sanitization of your laundry. The bacteria removal efficiency has been tested following a
similar methodology to the NF EN 13697 standard of Nov. 2001.

Normally soiled blouses, shirts, overalls etc. made of polyester (Diolen, Trevira),
polyamide (Perlon, Nylon) or blends with cotton.

J

EGD

F

Type of wash / Notes

label

N
O

B

A

J. Programme sequence indicator

K. “Door open” indication
L. “Child lock” indication
Your washing machine is equipped with

H

automatic safety functions which detect and
diagnose faults at an early stage and react
appropriately, e.g.:

M. “ Water tap closed” indication

C

N. “Clean pump” indication
O. “Service” indication

Detergents and additives Special options Start

Pre-

wash





Main

Wash

Yes

Yes

Softener Pre-

  

wash

Vor-

wäsche

Clean+

Clean+

2)

Rinse

Intensive

Hold

rinse

Spül-

Intensiv-

stopp

spülen

    

       

Eco

Eco

delay

Start-

vorwahl

Variable

spin

Schleu-

dern

Spin

Max
spin

speed

rpm

max.

1000

1)

Daily load Mischwäsche

Speed 15

AquaEco AquaEco

Jeans Jeans

SuperEco SuperEco

Delicates Feinwäsche

Wool Wolle

Handwash Handwäsche

Rinse & Spin

Spin Schleudern

Drain Abpumpen

: optional / Yes : dosing required

1)

For improved garment care, spin speed is restricted in these programmes.

2)

Only selectable up to 60°C.

Schnelle
Wäsche

Spülen &

Schleudern

20 - 60°C 3.0

20 - 30°C 3.0

20 - 40°C 2.5

20 - 60°C 5.0

20 - 60°C 6.0

20 - 40°C 1.5

20 - 40°C 1.0

20 - 40°C 1.0

– – 6.0

– – 6.0

– – –

Slightly to normally soiled textiles made of cotton and/or synthetics.

Refreshed briefly worn outer clothing made of cotton, artificial fibers and blends with
cotton. Use lowest recommended detergent amount.

Lightly soiled laundry made of synthetic fibres, or synthetics mixed with cotton garments.

Saving programme with very low water consumption. Use liquid detergent and the lowest
recommended amount for 3 kg laundry. Do not use softener.

Normally soiled cotton jeanswear and garments made of jeanslike material such as
trousers and jackets.

Normally to heavilly soiled and robust bed linen, table linen and underwear, towels, shirts
etc. made of cotton and/or linen.

Offers highest economy in energy consumption by prolonged wash duration. Ideal to be run
overnight to additionally profit from the more favourable energy rates. To avoid noise of
spinning at night, set spin speed to “0” and start spin programme in the morning, or define
programme start with “Start Delay” accordingly. Use with maximum load.

Curtains and delicate clothing, dresses, skirts, shirts and blouses.

Only woollens with a felt-free finish, labelled with the woolmark and identified as
machine washable.
This programme (40ºC) is tested and approved by The Woolmark Company for machine
washable wool.

Textiles made of silk, linen, wool and viscose marked as “handwashable”.
This programme (40ºC) is tested and approved by The Woolmark Company for
handwashable wool.

Same as the last rinse and the final spin in the “Cotton” programme.

In this programme spinning is intensive. Same as the spin cycle in the “Cotton” programme.

Drain only - no spinning. Alternative method of terminating programme after “Rinse Hold”.

The wool and handwash cycles of this machine have been tested and approved by The Woolmark Company for
the washing of Woolmark garments labelled as “machine wash” or “hand wash”provided that the garments are
washed according to the instructions on the garment label and those issued in this programme chart.

M0703

– Yes

– Yes

– Yes – – –

Yes



– Yes

Yes



– Yes

– Yes

– –





 



 







– –

– –

– –

– –

– –

– –

 

– –



– –



–

– –



 

–

– –



– –



– –



 

– – – – – – – –

– – – – – – – –

–

 

 

 

 

–

 

 

 

 

–

 

 



Bauknecht is a registered trademark.

max.

max.

max.

max.

max.

1000

1000

400

max.

max.

– –

1)

1)

1)

5019 412 10133

CONSUMPTION DATA

Programme

White Cotton / Hygienic+ 95 6.0 59** 1.90 2:00

Cotton 60 6.0 55 1.14 2:30

Cotton with “Eco”*** 60 6.0 55 0.90 3:30

Cotton 40 6.0 55 0.70 2:30
Synthetics 60 3.0 54** 0.90 1:40
Synthetics 40 3.0 48 0.55 1:25
Daily load 40 3.0 40 0.45 1:00

Speed15 30 3.0 30 0.15 0:15
AquaEco 40 2.5 19 0.45 1:00

Jeans 40 5.0 70 0.70 2:43

SuperEco 60 6.0 55 0.78 4:00

Delicate 40 1.5 50 0.55 0:45

Wool

Handwash 40 1.0 40 0.55 0:35

Consumption values were measured in normalized conditions in compliance with standard IEC/EN 60 456. Consumption data in the
home may vary with respect to the values in the table in relation to the water supply pressure and temperature, the load and the type
of wash.
* The remaining time indicator can deviate from the values in the table, because it takes into account the household conditions
applicable at that time.
** To reduce the water temperature, some cold water is added at the end of the main wash cycle, before the pump drains the water
out.
*** Reference Programme for Energy Label.

Temperature

(°C)

40 1.0 55 0.55 0:45

Load

(kg)

ADD DETERGENTS, CLOSE THE LID AND
SELECT THE PROGRAMME

Add detergent as indicated an the front page and as
described in the chapter “Detergent and Additives” in
your Instructions for Use.

1. Turn the programme selector to the desired
programme.

2. The temperature and spin speed indicated on the
display can be altered by pressing the “Temperature”
button or the “Variable spin” button. The light next
to the “Start” button flashes.

SELECT ANY DESIRED OPTION

When the combination of programme and additional
option(s) is not possible, the indication lights switch off
automatically. Unsuitable combinations of options are
deselected automatically.

“Prewash” button

• Only for heavily soiled loads (for example sand,
granular dirt) sensible. Increases the cycle time by
approximately 15 min.

• Do not use liquid detergent for the main wash when
activating the Prewash option.

“Clean+” button

• Choose this option if you use an in-wash additive for
stain removal (powder, for example “Vanish”) - it
will optimize the additive’s efficiency to get better
wash performance and stain removal.

• Selectable for programmes “Cotton” and
“Synthetics”; choose temperature of 30 or 40°C and
use with maximum load.

• Add an appropriate amount of in-wash additive for
stain removal (powder) to the main wash chamber,
together with your detergent (only use powder
detergent with this option). Respect the
manufacturer’s dosing instructions.

Water

(l)

• Prolongs the programme by approx. 5 to 15 minutes.

• Appropriate for use of stain removers and bleaches
on oxygen basis.

must not be used!
Rinse Hold” button

• The laundry remains in the last rinse water without
progressing to
and prevent colours from changing.

• This option is particularly recommended for the
programmes “Synthetics”, “Daily load” and
“Delicates”.

• It is particularly useful if you want to postpone
spinning to a later time, or if you want to drain only

• If you select “Rinse Hold”, do not leave items to
soak for too long
Note: The programme stops to “Rinse hold” at the
time the “Rinse hold” symbol on the display lights up.
The blue light under the

Terminate the “Rinse Hold” option:

• Press the “Start” button; the programme will
terminate automatically with the final spin cycle for
the present wash programme.

• If you do not wish to spin the clothes, turn the
programme selector to “Drain” and press the
“Start” button to start the Drain programme.

“Intensive Rinse” button

• More water is added and rinse cycle is prolonged.

• This option is particularly suitable for areas with very
soft water, washing baby linen and helping people
with allergies.

“Eco” button

• With a modified temperature profile and a slightly

prologned washing duration, the optimum
combination of excellent washing result and even
lower energy consumption is achieved.

“Variable spin” button

• Every programme has a predefined spin speed.

• Press the button to set another spin speed.

Energy

(kWh)

Chlorine or perborate bleaches

the final spin cycle to avoid creasing

.

Approx. Programme

Duration*

(hours : minutes)

“Start” button flashes.

• If spin speed “0” is selected, the final spinning is
cancelled but intermediate spin peaks remain during
the rinse. The water is drained out only.

SAVE YOUR FAVOURITE PROGRAMMES

If there is a programme setting which you use frequently,
the appliance offers the possibility to save one setting
for each programme so that it can be used again by just
pushing one button.

• Select the desired programme, temperature, spin
speed and option(s), push and hold the
“Favourites” button for at least 3 seconds.
The lamp next to “Favourites” shortly flashes and
then lights up - the programme settings is saved.
Next time you want to use your individual programme
settings, select the programme, push the “Favourites”
button and start by pushing “Start”.

If you want to replace the saved programme
setting by another one:

• Push the programme button, select temperature,
spin speed and options as desired and then press and
hold the “Favourites” button for at least 3 seconds.
The previously saved programme setting will be
replaced by the new one.

START DELAY

The “Start delay” allows to run the machine at the
consumer's convenience, for example at night when
electricity is cheaper.

• Select programme, temperature, spin speed and
options.

• Press the “Start Delay” button to select the delay
time up to 23 hours.

• Press the “Start” button.
The countdown of the delay time begins; the clock
symbol next to the delay time and the dot between
hours and minutes flash.

• The time delay indication disappears when the
programme starts and it is replaced by the remaining

.

programme time.

• Once having pressed the “Start” button, the
number of hours preselected can be reduced by
pressing and holding the “Start delay” button. From
1 hour on, the delay time can also be reduced by
minutes

To cancel the “Start delay”
..before you press the “Start” button:

• Select another programme or press the “Drain/
Reset”
..after having pressed the “Start” button:

• Press the “Reset” button for at least 3 second - the

start delay time dissapears from the display.

.

button.

PROGRAMME START

Open the tap and press the “Start” button. The
indication lamp next to the “Start” button lights up.
The programme sequence indicator shows the current
programme phase, running from left to right through
Wash, Rinse, Spin/Drain.

“DOOR OPEN” INDICATION

Before starting and after end of a programme, the lamp
lights to show the the lid can be opened. As long as a

wash programme is running, the lid remains locked and
must on no account be forced open. In case you have
an urgent need to open it during a running programme,
refer to “Cancel a running programme before the end”.

LOCK BUTTON

You can lock the buttons of the control panel against
improper use (e.g. by children).

• Press the temperature and spin speed button
simultaneously and hold them for at least 3 seconds.
The key symbol on the display lights up.

• To unlock the buttons again: proceed in the same way.

RED INDICATIONS ON THE DISPLAY

“Water tap closed”

The appliance has no or insufficient water supply. Open
the water tap: if the indications still lights up, refer to the
“Troubleshooting Guide” in the Instructions for Use.

“Clean pump”

Waste water is not pumped out. Check whether the
drain hose is kinked or the filter must be cleaned; in the
latter case refer to the Instructions for Use (“Removing
the Filter”).

“Service”

Lighting up of the “Service” indication can be caused
by a fault in an electrical component. Refer to the
“Troubleshooting Guide” in your “Instructions for Use”;
if the fault persists, contact our After Sales Service.

PROGRAMME END

• The symbols of the programme sequence indicator
are dark, and the “Door open” indication lights up.

1. Turn the programme selector to the “On/Off” position.

2. Close the water tap.

3. Open lid and drum and unload the machine.

4. Leave the lid open for some time to allow the
interior of the machine to dry.

CHANGE PROGRAMME AND/OR OPTIONS
AFTER PROGRAMME START

1. Press the “Start” button to pause the programme.
The light flashes.

2. Select the new programme, temperature, any
options and another spin speed if you want.

3. Press the “Start” button again. The new
programme continues at the same position where
the previous programme was interrupted. Do not
add detergent for this programme.

CANCEL A RUNNING PROGRAMME BEFORE
THE END

The “Reset” button cancels a programme before the
end.

• Press the “Reset” button for at least 3 seconds; “rES”
appears on the display. Any existing water is drained
out before the lid can be opened.

Bauknecht is a registered trademark.

5019 412 10133