Whirlpool WATE 9575 INSTRUCTION FOR USE
Spoelen
Start Selectie uren
GB WATE 9575
Snelwas
Fijne was
Synthetisch
Bonte was
Kookwas
BFCAGD E
Programme
White Cotton
Kookwas
Coloured
cotton
Bonte Was
Synthetics
Synthetisch
Delicates
Fijne Was
Rapid
Snelwas
Wool
Wol
Handwash
Handwas
Rinse + Spin
Spoelen +
centrifugeren
Spin
Centrifugeren
Gentle spin
Kort Centrifugeren
Drain
Afpompen / Reset
N.B. This machine is controlled by sensors. Please avoid excessive detergent dosing.
Care
Labels
—
—
—
—
Wol
Handwas
Normally soiled bed linen, table linen and underwear, towels, shirts etc.
made of cotton and linen.
For heavily soiled laundry the additional “Prewash” option can be selected as well.
Slightly to normally soiled bed linen, table linen and underwear, towels,
shirts etc., made of cotton and linen.
Slightly to normally soiled blouses, shirts, overalls etc. made of polyester
(Diolen, Trevira), polyamide (Perlon, Nylon) or blends with cotton.
Curtains and delicate clothing, dresses, skirts, shirts and blouses. 1.5
Slightly soiled overalls and sportswear made of cotton, polyester, polyamide
and blends with cotton.
Only woollens with a felt-free finish, labelled with the woolmark and
identified as machine washable.
If you select “Rinse Hold” do not leave items to soak for too long.
Textiles made of silk, linen, wool and viscose marked as “handwashable”.
If you select “Rinse Hold” do not leave items to soak for too long. A very
gentle spin is used in this programme.
Same as the last rinse and the final spin in the “Coloured Cotton”
programme.
Programme for treating wash with starch or softener.
In this programme spinning is intensive. Same as the spin cycle in the
“Coloured Cotton” programme.
In this programme spinning is gentle. Same as the spin cycle in the “Wool”
programme.
Drain only - no spinning. Alternative method of terminating programme
after “Rinse Hold”.
Waterstop
Kraan dicht
Makkelijk
Strijken
Voorwas Wassen Spoelen
Intensief
Spoelstop Centrifugeren Start Selectie uren
Type of wash / Notes
1200
1000
800
400
When you select an option, the
corresponding indicator lights up,
except if the combination of
programme, additional options and
temperature is not possible.
1)
2)
3)
Rinse
Hold
Spoelstop
❉
❉❉ ❉
❉
❉
WATE 9575
A. “Water Stop” Indication
B. “Water Tap” Indication
C. Temperature Selection Buttons
D. “Programme Sequence” Indicator
E. “Spin Speed Reduction” Button
F. “Start Delay” Button
G. “Start/Pause” Button
Detergents and additives Special Options
Max.
load
Prewash Main
kg
5.0
5.0
2.0
3.0
1.0
1.0
5.0
5.0
1.5
1)
❉
1)
❉
1)
❉
1)
❉
—
—
—
—
——— —— — —
——— —— — —❉
Wash
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Softener Easy
Ironing
Makkelijk
Strijken
Pre-
wash
Voorwas
Intensive
Intensief
❉❉❉❉❉ ❉ ❉
❉❉❉❉❉ ❉ ❉
❉❉❉❉❉❉
❉
❉
❉
❉
❉
—
❉
—— —
—— —
—— —
——
Rinse
Spoelen
—
❉❉ ❉ ❉
———— —— — — —
❉
: Option
Yes: dosing required
Do not use liquid detergents.
For improved garment care spin speed is
restricted to 1000 rpm in this programme.
For improved garment care spin speed is
restricted to 400 rpm in this programme.
Tempera-
Spin Speed
Reduction
Centrifugeren
Start
Delay
Start Selectie
Uren
ture
°C
20 to 95 1200
20 to 60 1200
2)
2)
❉
❉
❉
20 to 60 1000
20 to 40 1000
20 to 60 1200
2)
❉
3)
❉
❉
❉
20 to 40 1000
20 to 30 400
—
❉❉
2)
❉
❉
—
—
——
Max.
Spin
Speed
rpm
1200
1200
1000
2)
2)
2)
3)
2)
5019 412 00068
CONSUMPTION DATA
Programme
White Cotton
Coloured cotton
Coloured cotton
Synthetics
Synthetics
Rapid
Delicates
Wool
Handwash
Prewash cycle increases programme duration approximately 15 min. Consumption values were measured in normalized
conditions in compliance with standard IEC 60 456. Consumption data in the home may vary with respect to the values
in the table in relation to the water supply pressure and temperature, the load and the type of wash.
The data on the “Energy Label” refer to the programme “Coloured Cotton 60° C”.
* The remaining time indicator can similarly deviate from the values in the table, because it takes into account the
household conditions applicable at that time.
**To reduce the water temperature, some cold water is added at the end of the main wash cycle, before the pump
drains the water out.
Temperature Selector
(°C)
95 5.0 49** 1.60 2:00
60 5.0 48 0.95 2:05
40 5.0 48 0.60 2:00
60 2.0 54 0.70 1:30
40 2.0 50 0.50 1:15
30 3.0 35 0.40 0:30
40 1.5 50 0.50 0:45
40 1.0 50 0.50 0:45
30 1.0 35 0.40 0:35
PREPARATION OF WASH CYCLE
1. Close the drum flaps and check that they are
properly locked.
2. Add detergents and additives into the
dispenser to no more than the
“MAX“
mark, as follows:
• Programme with pre and main
wash
• Main wash programme
without prewash
• Fabric softeners and conditioners
• Stain remover agents
•
Anti-scale agents (if necessary)
3. Turn the
programme selector knob
desired programme.
The remaining time display shows the duration
of the chosen programme (in hours and
minutes) and the indicator light of the
“Start/Pause”
button flashes.
The programme sequence and the predefined
spin speed indication corresponding to the
selected programme lights up.
The preselected temperature can be altered by
pressing the “+” or “-” button.
SELECT THE DESIRED OPTION
When you select an option authorized by
the programme, the corresponding
level
to the
Load
(kg)
Water
(l)
Energy
(kWh)
Approx. Programme
Duration
(hours : minutes)*
“Easy Ironing” button
• Can be used together with “Cotton”,
“Coloured cotton” and “Synthetics”
programmes to make ironing easier.
• Increases the water quantity in rinsing and
the clothes are spun in a softer manner.
“Prewash” button
• Only for heavily soiled loads (for example
sand, granular dirt).
“Intensive Rinse” button
• The amount of water is increased to ensure
a more intensive rinse.
• This option is particularly suitable for areas
with very soft water, washing baby linen
and people with skin allergies.
“Rinse Hold” button
• The laundry remains in the last rinse water
without progressing to the final spin cycle
to avoid creasing and prevent colours from
fading.
• This option is particularly recommended for
the “Synthetics” or “Delicates”
programmes.
• This function is particularly useful if you
want to postpone spinning to a later time,
or if you want to drain only.
Note:
The programme stops to “Rinse Hold”
when the “Rinse Hold” light indicator
programme is on during the cycle.
indicator lights up, except if the
combination of programme, additional
options and temperature is not possible.
Appliance in “Rinse Hold”:
• Press the “Rinse Hold” button again: the
programme will terminate automatically
with the selected spin cycle.
• If you do not wish to spin the clothes, turn
the programme selector knob to the
“Drain” programme and press the “
Pause
” button again.
Start/
“Spin Speed Reduction” button
• Every programme has an automatically
allocated maximum spin speed.
• Press the button to set another spin speed.
• If you want to cancel the final spin, select
the rinse hold option and drain the water
after the cycle has finished (see
in “Rinse Hold”
).
Appliance
START DELAY
The “Start Delay” button allows the user to run
the machine at his convenience, for example at
night when electricity is cheaper.
• Select programme, temperature and
options.
• Press the “Start Delay” button several times
to select the delay time by 1 to 19 hours;
• Press the “
indicator light of the
Start/Pause
” button. The
“Start/Pause”
button
lights up and the lamp of the “Start Delay”
button flashes.
• The time delay indication disappears when
the programme starts and is replaced by the
remaining time.
• The number of hours preselected can be
reduced later by pressing the “Start Delay”
button again.
To cancel the “Start Delay” option
• Turn the programme selector to the “”
position.
• Reselect the desired programme and
options and press the “
Start/Pause
”
button.
PROGRAMME START
Turn on the tap and press the “
button. The indicator light of the “
Pause
” button lights up. The indicator lamp
Start/Pause
Start/
”
shows the sequence reached by the
programme. After starting the programme, the
programme sequence indicator signals the
Wash, Rinse and Spin phases.
Note
: If there is a power interruption or if the
appliance is disconnected during the cycle, the
programme will run again from the point
where it was interrupted.
DOOR LOCK
For safety reasons, the door is locked during
certain phases of the cycle. At the end of the
cycle or during an interruption, the door
unlocks automatically after about 1 minute.
END OF WASH CYCLE
• The remaining time is on “0:00” and all the
lights of the programme sequence
indication are off.
1. Turn the programme selector to the “”
position.
2. Turn the tap off.
3. Open the door and the drum flaps and
unload the machine.
CHANGE THE PROGRAMME OR OPTIONS
DURING THE CYCLE
1. Select the new programme using the
programme selector. If necessary, select the
additional options and the spin speed. The
luminous indicator of the
“Start/Pause”
button flashes.
Note:
the “Start Delay” and “Prewash”
options cannot be selected after a programme
change.
2. Press the
“Start/Pause
” button. The new
programme selected continues at the same
position where the previous programme was
interrupted.
Note:
Do not add detergent for this
programme.
PAUSE/INTERRUPT A PROGRAMME
If, for any reason, you wish to interrupt the
programme for a certain time and continue it
later:
1. Press the
“Start/Pause”
button. The light
flashes.
2. After the desired pause, press again on the
“Start/Pause”
button.
CANCEL PROGRAMME
1. Set the programme selector to “Drain”.
2. Press the
“Start/Pause”
button to start the
“Drain” programme.
5019 412 00068
Loading...