Whirlpool WATE 9375/2 INSTRUCTION FOR USE

GB WATE 9375

B

A

Programme

Cotton

Synthetics

Daily Mixed

Delicates

Rapid

Wool

Handwash

Rinse + Spin

Spin

Gentle spin

Drain

N.B. This machine is controlled by sensors. Please avoid excessive detergent dosing.

—

Care

Labels

Normally to heavily soiled bed linen, table linen and underwear, towels, shirts
etc. made of cotton and linen.
For heavily soiled laundry the additional “Prewash” option can be selected as
well.

Normally soiled blouses, shirts, overalls etc. made of polyester (Diolen,
Trevira), polyamide (Perlon, Nylon) or blends with cotton.

Slightly to normally soiled textiles made of cotton and/or synthetics. 3.0

Curtains and delicate clothing, dresses, skirts, shirts and blouses. 1.5
Shortly worn outer clothing made of cotton, polyester, polyamide and blends

with cotton.
Only woollens with a felt-free finish, labelled with the woolmark and identified

as machine washable.
If you select “Rinse Hold” do not leave items to soak for too long.

Textiles made of silk, linen, wool and viscose marked as “handwashable”.
If you select “Rinse Hold” do not leave items to soak for too long. A very gentle
spin is used in this programme.

Programme for treating the laundry with starch and softener or to moisten the
laundry. For delicate laundry reduce the spin speed to 400 - 800 rpm.

Programme to spin cotton or linen laundry intensively with maximum spin

—

speed.
Programme to spin delicate laundry gently with a restricted spin speed. 1.5

—

Drain only - no spinning. Alternative method of terminating programme after

—

“Rinse Hold”.

C

Type of wash / Notes

A. “Water Stop” Indication
B. “Water Tap” Indication
C. Temperature Selection Buttons

When you select an option, the
corresponding indicator lights up, except if
the combination of programme, additional
options and temperature is not possible.

D. “Programme Sequence” Indicator
E. “Spin Speed Reduction” Button
F. “Start Delay” Button

G. “Start/Pause” Button

E

FD

G

Max.

load

kg

5.0

2.0

3.0

1.0

1.0

5.0

5.0

Detergents and additives Special Options Tempera-

Pre-

Main

wash

❉

❉

—

❉

—

—

—

—

Softener Bleach Easy

Wash

1)

Yes

1)

Yes

Yes

1)

Yes

Yes

Yes

Yes

Yes

❉❉❉❉❉ ❉ ❉ ❉

❉
❉

❉
❉

❉

❉

❉

Ironing

—
—

——
————

————

————

———

Pre-

Intensive

wash

Rinse

❉❉❉ ❉ ❉

—

❉

❉

—— — — —— — —

❉❉ ❉❉

—

❉❉ ❉❉

—— — — —— — —❉

——— — — — — — — —

: Op tion

❉

Yes: dosing required

1)

Do not use liquid detergents.

2)

For improved garment care spin speed is restricted to
800 rpm in this programme.

3)

For improved garment care spin speed is restricted to
400 rpm in this programme.

Rinse

Spin Speed

Hold

Reduction

❉

❉

❉❉❉

❉

❉

❉

❉

Start

Delay

20 to 95 1000

2)

2)

2)

3)

❉

❉

❉

❉

20 to 60 800

30 to 60 1000

20 to 40 800

20 to 30 1000

20 to 40 800

20 to 30 400

❉❉

2)

❉
❉

ture

°C

—
—

—

Max.

Spin

Speed

rpm

1000

1000

800

2)

2)

2)

3)

2)

——

5019 412 10042

CONSUMPTION DATA

Programme

Temperature

Selector

(°C)

Load

(kg)

Water

(l)

Energy

(kWh)

Approx. Programme

Duration

(hours : minutes)*

Cotton 95/40 5.0 49**/48 1.60/0.60 2:05/2:00
Cotton 60 5.0 48 0.95 2:05

Synthetics 60/40 2.0 54/50 0.70/0.50 1:30/1:15

Daily Mixed 40 3.0 45 0.45 1:00

Delicates 40 1.5 50 0.50 0:45

Rapid 30 3.0 35 0.40 0:30
Wool 40 1.0 50 0.50 0:45

Handwash 30 1.0 35 0.40 0:35

Prewash cycle increases programme duration approximately 15 min. Consumption values were measured in normalized conditions in
compliance with standard IEC/EN 60 456. Consumption data in the home may vary with respect to the values in the table in relation to
the water supply pressure and temperature, the load and the type of wash.

The data on the “Energy Label” refer to the programme “Cotton 60° C”.

* The remaining time indicator can similarly deviate from the values in the table, because it takes into account the household conditions

applicable at that time.

** T o reduce the water temperature, some cold water is added at the end of the main wash cycle, before the pump drains the water out.

PREPARATION OF WASH CYCLE

1. Close the drum doors and check that they are
properly locked.

2. Add detergents and additives into the dispenser to
no more than the

“MAX”

level mark, as follows:

• Programme with pre and main wash

• Main wash programme without prewash

• Fabric softeners and conditioners

• Chlorine bleach

(4 chamber models only)

• Stain remover agents

• Anti-scale agents (if necessary)

3. Turn the

programme selector knob

to the
desired programme.
The remaining time display shows the duration of
the chosen programme (in hours and minutes)
and the indicator light of the

“Start/Pause”

button flashes.
The programme sequence and the predefined
spin speed indication corresponding to the
selected programme lights up.

The preselected temperature can be altered by
pressing the “+” or “-” button.

SELECT THE DESIRED OPTION

When you select an option authorized by the
programme, the corresponding indicator
lights up, except if the combination of
programme, additional options and
temperature is not possible.

“Easy Ironing” button

• Can be used together with “Cotton”,
“Synthetics” and “Daily Mixed” programmes to
make ironing easier.

• Increases the water quantity in rinsing and the
clothes are spun in a softer manner.

“Prewash” button

• Only for heavily soiled loads (for example sand,
granular dirt).

“Intensive Rinse” button

• The amount of water is increased to ensure a
more intensive rinse.

• This option is particularly suitable for areas with
very soft water, washing baby linen and people
with skin allergies.

“Rinse Hold” button

• The laundry remains in the last rinse water
without progressing to the final spin cycle to
avoid creasing and prevent colours from fading.

• This option is particularly recommended for the
“Synthetics”, “Delicates” and “Daily Mixed”
programmes.

• This function is particularly useful if you want to
postpone spinning to a later time, or if you want
to drain only.

Note:

The programme with “Rinse Hold” stops
when the “Rinse Hold” indicator light flashes on the
“Programme Sequence Indicator”.

Appliance in “Rinse Hold”:

• Press the “Rinse Hold” button again: the
programme will terminate automatically with
the selected spin cycle.

• If you do not wish to spin the clothes, turn the
programme selector knob to the “Drain”
programme and press the

“Start/Pause”

button again.

“Spin Speed Reduction” button

• Every programme has an automatically allocated
maximum spin speed.

• Press the button to set another spin speed.

• If you want to cancel the final spin, select the
rinse hold option and drain the water after the
cycle has finished (see

Hold”

).

Appliance in “Rinse

START DELAY

The “Start Delay” button allows the user to run the
machine at his convenience, for example at night
when electricity is cheaper.

• Select programme, temperature and options.

• Press the “Start Delay” button several times to
select the delay time by 1 to 19 hours;

• Press the
light of the

“Start/Pause”

“Start/Pause”

button. The indicator

button lights up and

the lamp of the “Start Delay” button flashes.

• The time delay indication disappears when the
programme starts and is replaced by the
remaining time.

• The number of hours preselected can be
reduced later by pressing the “Start Delay”
button again.

To cancel the “Start Delay” option

• Turn the programme selector to the “ ”
position.

• Reselect the desired programme and options
and press the

“Start/Pause”

button.

PROGRAMME START

Turn on the tap and press the
button. The indicator light of the

“Start/Pause”

“Start/Pause”

button lights up. The indicator lamp shows the
sequence reached by the programme. After starting
the programme, the programme sequence indicator
signals the Wash, Rinse and Spin phases.

Note

: If there is a power interruption or if the
appliance is disconnected during the cycle, the
programme will run again from the point where it
was interrupted.

LID LOCK

For safety reasons, the lid is locked during certain
phases of the cycle. At the end of the cycle or during
an interruption, the lid unlocks automatically after
about 1 minute.

END OF WASH CYCLE

• The remaining time is on “0:00” and all the lights
of the programme sequence indication are off.

1. Turn the programme selector to the “ ”
position.

2. Turn the tap off.

3. Open the li d and the drum doors and unload the
machine.

CHANGE THE PROGRAMME OR OPTIONS
DURING THE CYCLE

1. Select the new programme using the programme
selector. If necessary, select the additional
options and the spin speed. The luminous
indicator of the

Note:

The “Start Delay” and “Prewash” options

“Start/Pause”

button flashes.

cannot be selected after a programme change.

2. Press the

“Start/Pause”

button. The new
programme selected continues at the same
position where the previous programme was
interrupted.

Note:

Do not add detergent for this

programme.

PAUSE/INTERRUPT A PROGRAMME

If, for any reason, you wish to interrupt the
programme for a certain time and continue it later:

1. Press the

“Start/Pause”

button. The light
flashes.

2. After the desired pause, press again on the

“Start/Pause”

button.

CANCEL PROGRAMME

1. Set the programme selector to “Drain”.

2. Press the

“Start/Pause”

button to start the
“Drain” programme.

5019 412 10042