Whirlpool WAT 1009 PRIMELINE INSTRUCTION FOR USE
GB WAT 1009 PRIMELINE PROGRAMME TABLE
AB C D
Programme Type of fabrics / Degree of soiling / Notes
White Cotton
Kochwäsche
Coloured Cotton
Buntwäsche
Synthetic
Pflegeleicht
Rapid
Express
Delicate
Feinwäsche
Wool
Wolle
Handwash
Handwäsche
Rinse & Spin
Spülen & Schleudern
Intensive Spin
Intensivschleudern
Gentle Spin
Schonschleudern
Drain
Abpumpen
Averagely soiled, hard wearing and temperature stable textiles in cotton and
linen (bed linen, table linen, underwear, shirts etc.). The max load for heavily
soiled laundry is 3.5 kg.
Averagely soiled, hard wearing and temperature stable textiles in cotton and
linen (bed linen, table linen, underwear, shirts etc.).
Lightly or averagely soiled blouses, skirts, etc. made of polyester (Diolen,
Trevira), polyamide (Perlon, Nylon) or cotton blends.
Lightly soiled outer garments and sportswear made of cotton, polyester,
polyamide and cotton blend.
Delicate curtains, dresses, skirts, shirts and blouses. 1.5 Yes Yes
Only machine washable woollens with pure new wool label. If you select the
special function “Rinse Hold” do not leave garments to soak for too long.
Silk and other textiles, which are labelled with “Handwash”.
For improved garment care the spin speed is restricted to 400 rpm. For no
spin select the option “Rinse Hold”. When the option light is flashing, turn the
programme selector to “Drain” and press the “Start/Pause” button.
Programme for treating wash with starch or softener. Terminates with an
intensive spin cycle.
Programme for intensive spin cycle. 5.0
Programme for gentle spin cycle. 1.5
Drain only, without spin cycle. Alternative way of terminating programmes
with “Rinse Hold” setting.
A. Water tap indication
- Check your washing machine’s water supply -
B. Programme sequence indication
C. “Variable spin” button
D. “Start/Pause” button
Max.
Load
kg
Normal 5.0
Rapid 3.0
Normal 5.0
Rapid 3.0
Normal 3.5
Rapid 1.5
3.0
1.0
1.0
5.0
Detergent and Additives Options Tem pe -
Pre-
Wash Softener Bleach Rapid Pre-
wash
Kurz
Yes Yes
Yes Yes
Yes Yes
Yes
—
Yes
—
Yes
—
——
❉❉❉❉ ❉❉❉
❉
❉
❉
❉
❉
❉
❉
—
—
——— —
——
——— —
——— —
——— —
—— — —— — — —
—— — —— — — —
❉❉ ❉ ❉ ❉
❉❉ ❉ ❉ ❉
When you select an option, the
corresponding indicator lights up,
except if the combination of
programme, additional options and
temperature is not possible.
❉
: option
Yes: dosing required
1
Do not use liquid detergents.
2
For improved garment care spin speed is restricted to
800 rpm in this programme.
3
For improved garment care spin speed is restricted to
400 rpm in this programme.
wash
Vor-
wäsche
Intensive
Rinse
Intensiv
Spülen
Rinse
Hold
Spül-
stopp
Variable
spin
Schleudern
❉❉
❉
—
❉❉
❉❉
❉
—
❉❉
❉
❉
rature
°C
95 1000
30-40-60 1000
30-40-60
30 1000
30-40
Cold-30-40
30
Cold 1000
—
—
Max.
Speed
rpm/min
800
800
800
400
1000
800
—————————— — —
Spin
2)
2)
2)
3)
2)
N.B.: This appliance is controlled by sensors.
The excess of detergent in the dispenser could cause technical problems.
5019 412 10070
CONSUMPTION DATA
Tem perat ure
Programme
Selector
White Cotton 95
(°C)
**
Load
Water
Energy
Programme
Duration
(kg)
(l)
(kWh)
(hours: minutes)*
5.0 49 1.60 2:00
Coloured Cotton 60 5.0 48 0.95 2:05
Synthetic 60 2.0 54 0.70 1:30
Synthetic 40 2.0 50 0.50 1:15
Rapid 30 3.0 35 0.40 0:30
Delicate 40 1.5 50 0.50 0:45
Wool 40 1.0 50 0.50 0:45
Handwash 30 1.0 35 0.40 0:35
Prewash cycle increases programme duration by 5 to 20 min. Consumption values were measured in normalized conditions in
compliance with Standard IEC/EN 60 456. Consumption data in the home may vary with respect to the values in the table in
relation to the water supply pressure and temperature, the load and the type of wash.
*
The remaining time indicator can similary deviate from the values in the table, because it takes into account thehousehold
conditions applicable at that time.
**
To reduce the water temperature, some cold water is added at the end of the main wash cycle, before the pump drains the
water out.
ADDING DETERGENT AND ADDITIVES
Add the detergent and the additives into the
dispenser as follows:
• Programme with pre- and main wash
• Main wash programme without prewash
• Fabric softeners and conditioners
• Chlorine bleach
• Stain remover agents
• Anti-scale agents (water hardness 4)
Important:
• Be careful not to fill more than the
“MAX”
level mark.
• For programmes without prewash from cold
to 40° C it is recommended to use a liquid
detergent to avoid whitish residues on the
coloured laundry.
• With a Start delay, use a dose aid for liquid
detergent, placed directly in the drum.
CLOSE THE DOOR AND SELECT THE
PROGRAMME
1. Turn the
programme selector knob
to the
desired programme with its predefined
temperature.
The remaining time display shows the duration
of the choosen programme (in hours and
minutes) and the pilot lamp of the
Pause”
button is flashing.
“Start/
2. The programme sequence and the predefined
spin speed indication corresponding to the
selected programme lights up.
PRESS ANY DESIRED OPTION BUTTON(S)
The pilot lamp lights up.
An audible tone sounds if the combination of
programme and additional options is not
possible. Unsuitable combinations of options
are deselected automatically
“Prewash” button
• Only for heavily soiled loads (for example
sand, granular dirt) sensible. The cycle time
increases from 5 to 20 min.
“Intensive Rinse” button
• For improved rinsing efficiency the rinse water
level and the cycle time are increased.
• This option is particulary suitable for areas
with very soft water washing baby linen and
helps people with allergies.
“Rinse Hold” button
• The laundry remains in the last rinse water
without progressing to the final spin cycle to avoid
creasing and prevent colours from changing.
• This option is particularly recommended for
the programme “Synthetic” or “Delicate”.
• This function is particularly useful if you want
to postpone spinning to a later time or when
you do not wish to spin the clothes.
Note:
The programme stops to “Rinse Hold” at
the time the “Rinse Hold” button light flashes
Terminate the “Rinse Hold” option:
• Press the “Rinse Hold” button again; the
programme will terminate automatically with
the final spin cycle for the present wash
programme.
• If you do not wish to spin the clothes, turn the
programme selector knob to the drain
programme and start again.
“Variable spin” button
• Every programme has an automatic predefined
maximum spin speed.
• Press the button to set another spin speed.
• If no lamps are on, the final spinning is
cancelled.
PROGRAMME START
Open the tap and press the
The pilot lamp of the
“Start/Pause”
“Start/Pause”
button.
button lights
up. The indicator lamps show the sequence
reached in the programme. After starting the
programme, the sequence indication runs from left
to right through Wash, Rinse, Spin. When the
sequence of the programme is finished the
corresponding lamps goes out.
DOOR LOCK
During the running programme the door can be
opened for adding further laundry.
The door locks automatically in all rinsing and
spinning cycles. If the programme is stopped or the
electrical power supply is terminated, the door lock
will open after approximately 1 minute.
RED INDICATIONS
“Water Tap”
The appliance has no or insufficient water supply.
Open the water tap; if the indication still lights up,
refer to the “Troubleshooting Guide” in the
Instructions for Use.
PROGRAMME END
• The remaining time is on “0:00” and all the lights
of the programme sequence indication are “Off”.
A short audible tone sounds three times.
1. Turn the programme selector to the position “ ”.
2. Turn the water supply tap off.
3. Open the door and the drum flaps and unload
the machine..
SELECTING A NEW PROGRAMME, SPIN
SPEED, OPTIONS AFTER PROGRAMME START
1. Press the
“Start/Pause”
button to pause the
programme. The light flashes.
2. Select the new programme (with temperature),
any options and another spin speed if you want it.
3. Press the
“Start/Pause”
button again. The
programme continues at the same position of
the programme sequence indication. Do not
add detergent for this programme..
TO STOP, RESET A PROGRAMME BEFORE
THE END
1. Press the
“Start/Pause”
button to pause the
programme. The lights flashes.
2. Set the programme selector to “Drain”.
The spin indications are off and the remaining
time shows 2 minutes.
3. Press the
“Start/Pause”
button to start the
drain programme..
AUTOMATIC SAFETY FUNCTIONS /
FAULTS
This washing machine is equipped with automatic
safety functions which detect and diagnose faults at
an early stage and react appropriately. Often,
however , the faults detected are small enough to be
solved in a matter of minutes. Informations can be
found in the “Troubleshooting Guide”.
5019 412 10070
Loading...