Whirlpool WA STAR 64 EX BK INSTRUCTION FOR USE

GB PROGRAMME CHART

A. “Door open” indication This washing machine is equipped with

automatic safety functions which detect and diagnose faults at an early stage and react appropriately, e.g.:

B. “Service” indication C. “Water tap closed” indication D. “Clean pump” indication

Programme

Care

Labels

Max

Load

- For temperature selection, respect the manufacturer’s recommendations on the care label

Type of wash/Notes

C D

E. Programme selector

F. “Start/Pause” button G. “Variable spin” button

A B

H. Programme sequence indicator I. “Reset” button

J. “Start delay” button K. Time display

Detergents and additives Special options

Pre-

Main

wash

Softener Eco +

wash

Öko +

Pre-

wash

Vor-

wäsche

Start

delay

Start-

vorwahl

Easy

ironing

Leicht

bügeln

Intensive

rinse

Intensiv

spülen

Rinse

hold

Spül-

stopp

Varia ble

spin

Schleu-

dern

Max Spin

Speed

rpm

Cotton /

Antibacterial

60 - 95 °C

Cotton

40 °C

Jeans

40 °C

Synthetics

30 - 40 - 60 °C

Delicates

30 - 40 °C

Daily load

40 °C

Quick wash

30 °C

Wool

Cold - 40 °C

Handwash

40 °C

Lingerie

30 °C

Rinse & Spin Spülen & Schleudern

Spin Schleudern

Drain Abpumpen

❉

: optional / Yes : dosing required

For improved garment care, spin speed is restricted in these programmes.

Buntwäsche

60 - 95 °C

Buntwäsche

40 °C

Jeans

40 °C

Pflegeleicht

30 - 40 - 60 °C

Feinwäsche

30 - 40 °C

Mischwäsche

40 °C

Schnelle Wäsche

30 °C

Wolle

kalt - 40 °C

Handwäsche

40 °C

Dessous

30 °C

Koch

— —

6.0

5.0

2.5

1.5 Curtains and delicate clothing, dresses skirts, shirts and blouses.

3.0 Slightly to normally soiled textiles made of cotton and/or synthetics.

3.0

1.0

6.0

——

Normally to heavily soiled bed linen, table linen and underwear, towels, shirts etc. made of cotton and linen. Selecting “Cotton 95”, this programme eliminates bacteria, ensuring sanitization of your laundry. The bacteria removal efficiency has been tested following a similar methodology to the NF EN 13697 standard of Nov. 2001.

Normally soiled cotton jeanswear and garments made of robust jeanslike material such as trousers and jackets.

Normally soiled blouses, shirts, overalls etc. made of polyester (Diolen, Trevira), polyamide (Perlon, Nylon) or blends with cotton.

Shortly worn outer clothing made of cotton, polyester, polyamide and blends with cotton.

Only woollens, labelled with the Woolmark and identified as machine washable. This programme (40°C) is tested and approved by The Woolmark Company for machine washable wool.

Textiles made of linen, silk, wool and viscose marked as “handwashable”. This programme (40°C) is tested and approved by The Woolmark Company for handwashable wool.

This programme is particularly suitable to treat delicate lingerie (use of a laundry net strongly recommended).

Same as the last rinse and the final spin in the “Cotton” programme. In this programme spinning is intensive. Same as the spin cycle in the “Cotton”

programme. Drain only - no spinning. Alternative method of terminating programme after

“Rinse Hold”.

The wool and handwash cycles of this machine have been tested and approved by The Woolmark Company for the washing of Woolmark garments labelled as “machine wash” or “hand wash” provided that the garments are washed according to the instructions on the garment label and those issued in this programme chart. In the UK and Ireland, the Woolmark trademark is a certification trademark. M0619

Ye s

❉

Ye s

❉

Ye s

❉

Ye s

❉

Ye s

—

Ye s

—

Ye s

—

Ye s

—

Ye s

— ——

❉❉❉❉❉ ❉ ❉ ❉

❉❉❉❉

❉❉❉❉❉ ❉ ❉ ❉

❉

❉ ❉

❉❉

—

——

—— ——

—— — — —

——

❉❉

❉❉ ❉ ❉ ❉

❉

——

❉

——

❉

——

❉

——

❉

—

❉

———

❉❉❉

❉❉

max.

1000

max.

1000

400

max.

❉

—— — — — — — — — — —

5019 401 05391

CONSUMPTION DATA

Programme

Te m p e r a t u r e

(°C)

Cotton / Antibacterial 95 6.0 59

Load

(kg)

Water

(l)

Energy

(kWh)

Approx. Programme Duration

(hours : minutes)

1.90 2:00

Cotton 60 6.0 56 1.14 2:10

Cotton with “Eco”

***

60 6.0 49 1.02 2:20

Cotton 40 5.0 56 0.70 2:00

Jeans 40 5.0 70 0.70 2:15

Synthetics 60 2.5 50

0.80 1:35

Synthetics 40 2.5 46 0.50 1:20

Delicates 30 1.5 60 0.50 0:45

Daily load 40 3.0 41 0.50 1:00

Quick wash 30 3.0 41 0.40 0:30

Wool 40 1.0 60 0.50 0:45

Handwash 40 1.0 45 0.50 0:40

Lingerie 30 1.0 45 0.40 0:40

Consumption values were measured in normalized conditions in compliance with Standard IEC/EN 60 456. Consumption data in the home may vary with respect to the values in the table in relation to the water supply pressure and temperature, the load and the type of wash.

The remaining time indicator can deviate from the values in the table, because it takes into account the household conditions

applicable at that time. To reduce the water temperature, some cold water is added at the end of the main wash cycle, before the pump drains the water out.

Reference Programme for Energy Label.

***

ADD DETERGENTS, CLOSE THE DOOR AND SELECT THE PROGRAMME

1. Add detergent as indicated on the front page and as described in the chapter “Detergent and Additives” in your Instructions for Use.

2. Turn the

programme selector

to the desired programme and temperature. The

time display

shows the duration of the chosen programme (in hours and minutes), and the

“Start/Pause”

The indication lamp of the predefined

lights up.

speed

indication lamp flashes.

spin

SELECT ANY DESIRED OPTION

Push the button(s) of any option(s) desired - the respective indication lights up. When the combination of programme and additional option(s) is not possible, the indication lights switch off automatically. Unsuitable combinations of options are deselected automatically.

“Eco” button

•With a modified temperature profile and a slightly prolonged washing duration, the optimum combination of excellent washing result and even lower energy consumption is achieved.

“Prewash” button

• Only for heavily soiled loads (for example sand, granular dirt) sensible. Increases the cycle time by approximately 15 min.

• Do not use liquid detergent for the main wash when activating the “Prewash” option.

“Easy ironing” button

• Can be used together with “Cotton”, “Synthetics” and “Daily load” programmes to make ironing easier.

• Increases the water quantity and the clothes are spun very gently.

“Intensive rinse” button

• More water is added and rinse cycle is prolonged.

• This option is particularly suitable for areas with very soft water, washing baby linen and helps people with allergies.

“Rinse hold” button

• The laundry remains in the last rinse water without progressing to the final spin cycle to avoid creasing and prevent colours from changing.

• This option is particularly recommended for the programmes “Synthetics”, “Daily load” and “Delicates”.

• It is particularly useful if you want to postpone spinning to a later time, or if you want to drain only.

• If you select “Rinse hold” do not leave the laundry items to soak for too long.

The programme stops to “Rinse hold” at

Note:

the time the “Rinse hold” light in the programme sequence indication is on. The indication lamp over the

“Start/Pause”

button flashes.

Terminate the “Rinse hold” option:

•Press the

“Start/Pause”

button; the programme will terminate automatically with the final spin cycle for the present wash programme.

• If you do not wish to spin the clothes, turn the programme selector knob to the “Drain” programme and press the

“Start/Pause”

button.

“Variable spin” button

• Every programme has a predefined spin speed.

• Press the button to set another spin speed.

• If spin speed “0” is selected, the final spinning is cancelled but intermediate spin peaks remain during rinse. The water is drained out only.

START DELAY

The “Start Delay” allows to run the machine at the consumer’s convenience, for example at night when electricity is cheaper. Do not use liquid detergent when activating the “Start Delay”.

• Select programme, temperature and options.

• Press the “Start Delay” button to select the delay time by 1 to 23 hours;

•Press the

“Start/Pause”

button. The indication light over the “Start Delay” button flashes and the countdown of the delay time begins.

• The time delay indication disappears when the programme starts and it is replaced by the remaining programme time.

• Once having pressed the

“Start/Pause”

button, the number of hours preselected can be reduced by pressing again the “Start Delay” button.

To cancel the “Start Delay” ..before you press the “Start/Pause” button:

• Turn the programme selector to another position or press the

“Reset”

button.

..after having pressed the “Start/Pause” button:

• Press the

button for at least 3 seconds - the

“Reset”

start delay time disappears from the time display.

PROGRAMME START

Open the tap and press the indication lamp over the

“Start/Pause”

button. The

button lights up. The programme sequence indicator shows the current programme phase, running from left to right through Wash, Rinse, Spin/Drain. The time display shows the remaining programme time. Due to variations in load and temperature of inlet water, the remaining time is newly calculated in certain programme phases. If this is the case, an animation appears on the time display.

“DOOR OPEN” INDICATION

Before starting and after end of a programme, the lamp lights to show that the door can be opened. As long as a wash programme is running, the door remains locked and must on no account be forced open. In case you have an urgent need to open it during a running programme, refer to “Cancel (Reset) a running programme before the end”.

RED INDICATIONS

“Service”

Lighting up of the “Service” indication can be caused by a fault in an electrical component. Refer to the “Troubleshooting Guide” in your Instructions for Use; if the fault persists, contact our After Sales Service.

“Water tap closed”

The appliance has no or insufficient water supply. Open the water tap; if the indication still lights up, refer to the “Troubleshooting Guide” in the Instructions for Use.

“Clean pump”

Waste water is not pumped out. Check whether the drain hose is kinked or the filter must be cleaned; in the latter case refer to the Instructions for Use (“Removing the Filter”).

PROGRAMME END

• All the lights of the programme sequence indicator are off, and the “Door open” indication lights up.

1. Turn the programme selector to the “Off/O” position.

2. Close the water tap.

3. Open the door and unload the machine.

4. Leave the door ajar to allow the drum to dry.

CHANGE PROGRAMME AND/OR OPTIONS AFTER PROGRAMME START

1. Press the

“Start/Pause”

button to pause the

programme. The light flashes.

2. Select the new programme (with temperature), any options and another spin speed if you want.

3. Press the

“Start/Pause”

button again. The new programme continues at the same position where the previous programme was interrupted. Do not add detergent for this programme.

CANCEL (RESET) A RUNNING PROGRAMME BEFORE THE END

The

“Reset”

button cancels a programme before

the end.

•Press the

“Reset”

button for at least 3 seconds. Any existing water is drained out before the door can be opened.

5019 401 05391