Whirlpool WA SENSITIVE 34 DI, WA SENSE 42 DI, WA SENSITIVE 32 DI, WAP 6660-1 BK, WAP 6460-1 BK INSTRUCTION FOR USE
40105465GB.fm Page 1 Friday, October 31, 2008 12:31 PM
GB PROGRAMME CHART
A. “Door open” indication
This washing machine is equipped with
automatic safety functions which
detect and diagnose faults at an early
stage and react appropriately, e.g.:
B. “Service” indication
C. “Water tap closed” indication
D. “Clean pump” indication
Max
Programme
White Cotton /
Hygienic +
60 - 95 °C
Cotton
40 °C
SuperEco
60 °C
Synthetics
30 - 40 - 60 °C
Delicates
30 - 40 °C
Daily load
40 °C
Quick wash
30 °C
Wool
Cold - 40 °C
Handwash
40 °C
Lingerie
30 °C
Rinse & Spin Spülen & Schleudern
Spin Schleudern
Drain Abpumpen
❉
: = optional / Yes = dosing required.
1)
For improved garment care, spin speed is restricted to 1000 rpm in this programme.
2)
For improved garment care, spin speed is restricted to 400 rpm in this programme.
Koch- Buntwäsche/
Hygiene +
60 - 95 °C
Koch- Buntwäsche
40 °C
SuperEco
60 °C
Pflegeleicht
30 - 40 - 60 °C
Feinwäsche
30 - 40 °C
Mischwäsche
40 °C
Schnelle Wäsche 30min.
30 °C
Wolle
Kalt - 40 °C
Handwäsche
40 °C
Dessous
30 °C
Care
Labels
—
—
——
Load
kg
6.0
5.0
6.0
2.5
1.5
3.0
3.0
1.0
1.0
1.0
6.0
6.0
- For temperature selection, respect the manufacturer’s
recommendations on the care label
Normally to heavily soiled bed linen, table linen and underwear, towels, shirts
etc. made of cotton and linen.
Selecting “Cotton 95”, this programme eliminates bacteria, ensuring
sanitization of your laundry. The bacteria removal efficiency has been tested
following a similar methodology to the NF EN 13697 standard of Nov. 2001.
With heavily soiled laundry the additional “Prewash” option can be additionally
selected.
Slightly to normally soiled bed linen, table linen and underwear, towels, shirts
etc. made of cotton and linen.
Offers highest economy in energy consumption by prolonged washing duration.
Ideal to be run overnight to additionally profit from the more favourable energy
rates. To avoid noise of spinning at night, set spin speed to “0” and start spin
programme in the morning, or define programme start with “Start delay”
accordingly.
Normally soiled blouses, shirts, overalls etc. made of polyester (Diolen,
Trevira), polyamide (Perlon, Nylon) or blends with cotton.
With heavily soiled laundry the additional “Prewash” option can be additionally
selected.
Curtains and delicate clothing, dresses skirts, shirts and blouses.
With heavily soiled laundry the additional “Prewash” option can be additionally
selected.
Slightly to normally soiled textiles made of cotton and/or synthetics.
Shortly worn outer clothing made of cotton, polyester, polyamide and blends
with cotton.
Only woollens, labelled with the Woolmark and identified as machine
washable.
If you select “Rinse Hold” do not leave items to soak for too long.
Textiles made of linen, silk, wool and viscose marked as “handwashable”.
If you select “Rinse Hold” do not leave items to soak for too long. A very gentle
spin is used in this programme.
This cycle is particularly suitable to treat delicate lingerie (use of a laundry net
strongly recommended).
Same as the last rinse and the final spin in the “Cotton” programme.
In this programme spinning is intensive. Same as the spin cycle in the “Cotton”
programme.
Drain only - no spinning. Alternative method of terminating programme after
“Rinse Hold”.
K
J
Type of wash/Notes
C
D
G
E. Programme selector
H
}
F. “Start” button
G. Spin speed selector
A
H. Programme sequence indicator
B
I
I. “Reset” button
J. “Start delay” button
E
Detergents and additives Special options
Pre-
Main
Wash
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Softener Start
❉❉❉❉❉ ❉❉❉
❉❉
❉❉❉❉❉ ❉❉❉
❉❉
❉❉
❉❉
❉❉
❉❉
❉❉
❉❉
wash
❉
—
❉
❉
—
—
—
—
—
——
—— —
—— —
delay
Start-
vorwahl
❉
❉
F
K. Time display
Clean +
Clean +
Pre-
wash
wäsche
Vor-
Easy
ironing
Leicht
bügeln
Intensive
Intensiv
spülen
———
—
——
——
❉
❉❉❉❉
——— —
——— —
——— —
——— —
———
——— — —
——— — — — —
Rinse
rinse
hold
Spül-
stopp
Variable
spin
Schleudern
❉❉❉
❉❉
❉❉
❉❉
❉❉
❉❉
❉❉❉
❉
5019 401 05465
Max
Spin
Speed
rpm
max.
max.
1000
1000
max.
max.
1000
400
400
max.
max.
1)
1)
1)
2)
2)
Black process 45.0° 150.0 LPI
40105465GB.fm Page 2 Friday, October 31, 2008 12:31 PM
CONSUMPTION DATA
Programme
White Cotton / Hygienic + 95 6.0 59
Consumption values were measured in normalized conditions in compliance with Standard IEC/EN 60 456. Consumption data in the home
may vary with respect to the values in the table in relation to the water supply pressure and temperature, the load and the type of wash.
*
**
***
Cotton
***
Cotton 40 5.0 56 0.70 2:00
SuperEco 60 6.0 51 0.72 4:00
Synthetics 60 2.5 50
Synthetics 40 2.5 46 0.50 1:20
Delicates 30 1.5 60 0.50 0:45
Daily load 40 3.0 41 0.50 1:00
Quick wash 30 3.0 41 0.40 0:30
Wool 40 1.0 60 0.50 0:45
Handwash 40 1.0 45 0.50 0:40
Lingerie 30 1.0 45 0.40 0:40
The remaining time indicator can deviate from the values in the table, because it takes into account the household conditions
applicable at that time.
To reduce the water temperature, some cold water is added at the end of the main wash cycle, before the pump drains the water out.
Reference Programme for Energy Label.
Temperature
(°C)
60 6.0 49 1.02 2:20
ADD DETERGENTS, CLOSE THE DOOR
AND SELECT THE PROGRAMME
Add detergent as indicated on the front page and as
described in the chapter “Detergent and Additives” in
your Instructions for Use.
1. Turn the
programme and temperature.
2. The
programme (in hours and minutes), and the indication
lamp next to the
3. The
lights up.
programme selector
time display
indication lamp
shows the duration of the chosen
“Start”
of the predefined spin speed
to the desired
button flashes.
SELECT ANY DESIRED OPTION
Push the button(s) of any option(s) desired - the respective
indication lights up.
When the combination of programme and additional
option(s) is not possible, the indication lights switch off
automatically. Unsuitable combinations of options are
deselected automatically.
“Clean +” button
• Choose this option if you use an in-wash additive for
stain removal (powder, for example “Vanish”) - it will
optimize the additive’s efficiency to get better wash
performance and stain removal.
• Selectable for pr ogrammes “Cotton” and “Synthetics”;
choose temperature of 30 or 40°C and use with
maximum load.
• Add an appropriate amount of in-wash additive fo r stain
removal (powder) to the main wash chamber, together
with your detergent (only use powder detergent with this
option). Respect the manufacturer’s dosing instructions.
Load
Water
(kg)
• P rolongs the programme by approx. 10 to 15 minutes.
• Appropriate for use of stain re movers an d bleaches on
“Prewash” button
• Only for heavily soiled loads (for example sand,
“Easy ironing” button
• Can be used together with “Cotton”, “Synthetics” and
• Increases the water quantity and the clothes are spun
“Intensive rinse” button
• More water is added and rinse cycle is prolonged.
• This option is particularly suitable for areas with very soft
• Selectable only on the lowest temperature step of
“Rinse hold” button
• The laundry remains in the last rinse water without
• This option is particularly recommended for the
• It is particularly useful if you want to postpone spinning
Terminate the “Rinse hold” option:
• P ress the
Energy
(l)
(kWh)
1.90 2:00
**
0.80 1:35
**
oxygen basis.
not be used!
granular dirt) sensible. Increases the cycle time by
approximately 15 min.
“Daily load” programmes to make ironing easier.
very gently.
water , washing baby linen and helping people with allergies.
each programme.
progressing to the final spin cycle to avoid creasing and
prevent colours from changing.
programmes “Synthetics”, “Daily load” and “Delicates”.
to a later time, or if you want to drain only.
The programme stops to “Rinse hold” at the
Note:
time the “Rinse hold” light in the programme sequence
indication is on. The indication lamp next to the
button flashes.
“Start”
terminate automatically with the final spin cycle for the
present wash programme.
“Start”
Approx. Programme Duration
(hours : minutes)
Chlorine or perborate bleaches must
button; the programme will
*
• If you do not wish to spin the clothes, turn the
programme selector knob to the “Drain” programme
and press the
“Variable spin” button
• Every programme has a predefined spin speed.
• P ress the button to set another spin speed.
• If spin speed “0” is selected, the final spinning is
cancelled but intermediate spin peaks remain during
rinse. The water is drained out only.
“Start”
button.
START DELAY
The “Start Delay” allows to run the machine at the
consumer’s convenience, for example at night when
electricity is cheaper.
• Select programme, temperature and options.
• Press the “Start Delay” button to select the delay time
by 1 to 23 hours;
• Press the
The indication light next to the “Start Delay” button
lights up and the countdown of the delay time begins.
• The time delay indication disappears when the
programme starts and it is replaced by the remaining
programme time.
• Once having pressed the
of hours preselected can be reduced by pressing again
the “Start Delay” button.
To cancel the “Start Delay”
..before you press the “Start” button:
• Turn the programme selector to another position or
press the
..after having pressed the “Start” button:
• Press the
start delay time disappears from the time display.
button.
“Start”
“Start”
button.
“Reset”
button for at least 3 seconds - the
“Reset”
button, the number
PROGR AMME START
Open the tap and press the
indication lamp next to the
programme sequence indicator shows the current
programme phase, running from left to right through
Wash, Rinse, Spin/Drain.
The time display shows the remaining programme time. Due to
variations in load and temperature of inlet water, the remaining
time is newly calculated in certain programme phases. If this is
the case, an animation appears on the time display.
button. The
“Start”
button lights up. The
“Start”
“DOOR OPEN” INDICATION
Before starting and after end of a programme, the lamp
lights to show that the door can be opened. As long as a
wash programme is running, the door remains locked and
must on no account be forced open. In case you have an
urgent need to open it during a running programme, refer
to “Cancel (Reset) a running programme before the end”.
RED INDICATIONS
“Service”
Lighting up of the “Service” indication can be caused by a
fault in an electrical component. Refer to the
“Troubleshooting Guide” in your Instructions for Use; if
the fault persists, contact our After Sales Service.
“Water tap closed”
The appliance has no or insufficient water supply. Open
the water tap; if the indication still lights up, refer to the
“Troubleshooting Guide” in the Instructions for Use.
“Clean pump”
Waste water is not pumped out. Check whether the drain
hose is kinked or the filter must be cleaned; in the latter case
refer to the Instructions for Use (“Removing the Filter”).
PROGRAMME END
• All the lights of the programme sequence indicator
are off, and the “Door open” indication lights up.
1. Turn the programme selector to the “Off/O” position.
2. Close the water tap.
3. Open the door and unload the machine.
4. Leave the door ajar to allow the drum to dry.
CHANGE PROGRAMME AND/OR OPTIONS
AFTER PROGRAMME START
1. Press the
The light flashes.
2. Select the new programme and, if you want, another
spin speed and any options.
3. Press the
continues at the same position where the previous
programme was interrupted. Do not add detergent
for this programme.
button to pause the programme.
“Start”
button again. The new programme
“Start”
CANCEL (RESET) A RUNNING
PROGRAMME BEFORE THE END
The
• Press the
button cancels a programme before the end.
“Reset”
button for at least 3 seconds. Any
“Reset”
existing water is drained out before the door can be
opened.
5019 401 05465
Black process 45.0° 150.0 LPI
Loading...