Whirlpool WA PURE XXL 44 FLD, WA PLATINUM XXL/E BK INSTRUCTION FOR USE

40105503GB.fm Page 1 Tuesday, August 4, 2009 12:05 PM

GB PROGRAMME CHART

A. Programme selector B. Display C. “Temperature” button D. “Variable spin” button E. “Start delay” button F. “Start (Pause)” button G. “Reset/Drain” button H. “Favourites” button

J M

}

A F

I. Programme sequence indication

J. “Door open” indication

K. “Child lock” indication L. “Detergent overdosage” indication

M. Red failure indications

Programme

White Cotton /

Hygiene +

Cotton Bunt

Synthetics Pflegeleicht

Delicates Fein

Wool

Handwash

Lingerie Dessous

Eco Cotton Baumwolle Eco

Sport Sport

SuperEco SuperEco

Wolle

Hand

Tempe-

rature

70 - 95 °C 8.0

Koch

20 - 60 °C

20 - 40 °C

20 - 40 °C 2.0

20 - 30 °C 2.0

60 °C 8.0

20 - 30 °C

20 - 60 °C 8.0

Care

Labels

Variable

spin

Schleu-

dern

Spin

Max Spin

Speed

rpm

max.

1000

400

max.

Max

Load

- Respect the manufacturer’s recommendations on the care label

Normally to heavily soiled bed linen, table linen and underwear, towels, shirts etc. made of cotton and linen. At a temperature of 80°C or more, this programme eliminates bacteria, ensuring sanitization of your laundry. The bacteria removal efficiency has been tested following a similar

8.0

methodology to the NF EN 13697 standard of Nov. 2001.

Normally soiled blouses, shirts, overalls etc. made of polyester (Diolen, Trevira), polyamide

3.5

(Perlon, Nylon) or blends with cotton.

Curtains and delicate clothing, dresses, skirts, shirts and blouses.

2.5

Only woollens, labelled with the Woolmark and identified as machine washable. This programme (40°C) is tested and approved by The Woolmark Company for machine washable wool.

Textiles made of silk, linen, wool and viscose marked as “handwashable”. This programme (40°C) is tested and approved by The Woolmark Company for handwashable wool.

This programme is particularly suitable to treat delicate lingerie (use of a laundry net strongly recommended).

Heavily soiled and robust laundry washable at 60°C such as bed linen, table linen, towels etc.

The extended programme duration enables economic energy and water consumption while maintaining good washing results.

Normally soiled and sweaty sportswear made of cotton jersey or microfibers.

This programme includes a prewash cycle – you can add detergent also to the prewash chamber.

3.5

Do not add any softener.

Normally to heavily and robust soiled bed linen, table linen and underwear, towels, shirts etc. made of cotton and linen.

Offers highest economy in energy consumption by prolonged washing duration. Ideal to be run overnight to additionally profit from the more favourable energy rates. To avoid noise of spinning at night, set spin speed to “0” and start spin programme in the morning, or define programme start with “Start Delay” accordingly.

Type of wash/Notes

Detergents and additives Selectable options Start

Pre-

Main

wash

❉

❉ ❉

—

— — —

❉

—

Softener Clean +

wash

Yes

Clean +

❉❉❉❉ ❉❉❉

❉❉❉❉ ❉❉❉ ❉

❉

❉ ❉ ❉

———

❉

Pre-

wash

Vor-

Spülstopp

wäsche

—

❉❉

——

—— —— ——

——

Rinse

Intensive

hold

Intensiv

Spülen

❉

❉ ❉ ❉❉❉❉

❉❉❉❉

rinse

— —

delay

Start-

vorwahl

❉❉ ❉❉

Daily load Mix

Speed 15 Kurz 15

Rinse & Spin

Spin Schleudern

❉

optional / Yes : dosing required

For improved garment care, spin speed is restricted in these programmes.

Black process 45.0° 150.0 LPI

Spulen &

Schleudern

20 - 60 °C

20 - 30 °C 3.0

—— ——

Slightly to normally soiled textiles made of cotton and/or synthetics.

6.0

Refreshes briefly worn outer clothing made of cotton, artificial fibers and blends with cotton.

Use lowest recommended detergent amount. Same as the last rinse and the final spin in the “Cotton” programme.

8.0

In this programme spinning is intensive. Same as the spin cycle in the “Cotton” programme.

8.0

The wool and handwash cycles of this machine have been tested and approved by The Woolmark Company for the washing of Woolmark garments labelled as “machine wash” or “hand wash” provided that the garments are washed according to the instructions on the garment label and those issued in this programme chart. M0702

Yes

—

Yes

— ——

❉ ❉

❉

—— ——

——

❉❉❉❉ ❉

—

❉❉❉❉

——— —— — —

5019 401 05503

❉❉

max.

max. max.

max.

40105503GB.fm Page 2 Tuesday, August 4, 2009 12:05 PM

The sensor Technology automatically adapts Programme Time, Water and Energy consumption to the size of your wash load.

CONSUMPTION DATA

Programme

Temp e ratu r e

(°C)

White Cotton / Hygiene + 95 8.0 82

Cotton 60 8.0 59 1.36 2:20

Cotton 40 8.0 77 0.75 2:05 Synthetics 60 3.5 46 Synthetics 40 3.5 42 0.50 1:20

Delicates 30 2.5 60 0.40 0:45

Wool 40 2.0 60 0.60 0:45

Handwash 40 2.0 45 0.60 0:40

Lingerie 30 2.0 45 0.35 0:36

Eco Cotton

***

60 8.0 59 1.04 4:00

Sport 30 3.5 54 0.55 1:34

SuperEco 60 8.0 75 0.95 4:00

Daily load 40 6.0 73 0.60 1:00

Speed 15 30 3.0 30 0.20 0:15

Consumption values were measured in normalized conditions in compliance with Standard IEC/EN 60 456. Consumption data in the home may vary with respect to the values in the table in relation to the water supply pressure and temperature, the load and the type of wash.

The time indicated on the display can deviate from the values in the table, because it takes into account the operation conditi ons

applicable at that time. To reduce the water temperature, some cold water is added at the end of the main wash cycle, before the pump drains the water out.

Reference Programme for Energy Label (with separator in detergent dispenser removed for use of powder detergent).

***

ADD DETERGENTS, CLOSE THE DOOR AND SELECT THE PROGRAMME

Add detergent as indicated on the front page and as described in the chapter “Detergent and Additives” in your Instructions for Use (remove separator in detergent dispenser for use of powder detergent if necessary). Turn the programme selector to the desired programme; the light of the

“Start (Pause)”

indicated on the display can be altered by pressing the

speed

“Temperature” button or the “Variable spin” button.

button blinks. The

temperature

SELECT ANY DESIRED OPTION

When the combination of programme and additional option(s) is not possible, the indication lights switch off automatically. Unsuitable combinations of options are deselected automatically.

“Clean+” button

• Choose this option if you use an in-wash additive for stain removal (powder, for example “Vanish”) - it will optimize the additive’s efficiency to get better wash performance and stain removal.

• Choose temperature of 30 or 40°C and use with maximum load.

• Add an appropriate amount of in-wash additive for stain removal (powder) to the main wash chamber, together with your detergent (only use powder detergent with this option). Respect the manufacturer’s dosing instructions.

• Prolongs the programme by approx. 10 to 15 minutes.

• Appropriate for use of stain removers and bleaches on oxygen basis.

Chlorine or perborate bleaches must not be used!

“Prewash” button

• Only for heavily soiled loads (for example sand, granular dirt) sensible. Increases the cycle time by approximately 15 min.

• Do not use liquid detergent for the main wash when activating the “Prewash” option.

and

Load

Water

(kg)

“Rinse hold” button

• The laundry remains in the last rinse water, without

• The programme stops to “Rinse hold” when the “Rinse hold”

• To terminate the “Rinse hold” by draining the water, without

spin

• To terminate the “Rinse hold” by spinning the laundry, press

• Do not leave the laundry to soak for too long in the “Rinse hold”.

“Intensive rinse” button

• More water is added and rinse cycle is prolonged.

• This option is particularly suitable for areas with very soft water or

“Variable spin” button

• Every programme has a predefined spin speed.

• Press the button to set another spin speed.

• If spin speed “0” is selected, the final spinning is cancelled but

Energy

(l)

(kWh)

2.40 2:10

0.85 1:35

progressing to the fnal spin cycle, to avoid creasing and prevent colours from changing.

symbol on the display blinks; the light of the

button blinks as well.

(Pause)”

any spinning, press the

the “Variable spin” button to select the desired spin speed and then

“Start (Pause)”

for washing baby linen, and helps people with allergies.

intermediate spin peaks remain during rinse. The water is drained out only.

Approx. Programme Duration

(hours : minutes)

“Start (Pause)”

to start the spin cycle.

SAVE YOUR FAVOURITE PROGRAMMES

If there is a programme setting which you use frequently, the appliance offers the possibility to save one setting for each programme so that it can be used again by just pushing one button.

• Select the desired programme, temperature, spin speed and option(s), push and hold the 3 seconds. The lamp of the and then lights up - the programme setting is saved.

“Favourites”

“Start

button.

button for at least

button shortly blinks

Next time you want to use your individual programme setting, select the programme, push the pushing

“Start (Pause)”

If you want to replace the saved programme setting by another one, proceed as already described above.

“Favourites”

button and start by

START DELAY

The “Start delay” allows to run the machine at the consumer’s convenience, for example at night when electricity is cheaper. Do not use liquid detergent when activating the “Start delay”.

• Select programme, temperature, spin speed and options.

• Press the Start delay button to select one of the delay time steps between 0:30 and 23:00 hours.

•Press the

• The time delay indication disappears when the programme

To cancel the “Start delay” ..before you press the “Start (Pause)” button:

• Press the

..after having pressed the “Start (Pause)” button:

Press the from the display; press programme immediately.

“Start (Pause)”

becomes solid. The countdown of the delay time begins; the clock symbol next to the delay time and the colon between hours and minutes blink.

starts and it is replaced by the remaining programme time.

“Reset/Drain”

“0:00” - the delay time disappears after a few secon ds.

“Start (Pause)”

button; the light stops blinking and

button, or set the start delay time to

button - the delay time disappears

“Start (Pause)”

again to start the selected

“DOOR OPEN” INDICATION

Before starting and after end of a programme, the symbol lights to show that the door can be opened. As long as a wash programme is running, the door remains locked and must on no account be forced open. In case you have to open it urgently during a running programme, refer to “Reset a running programme before the end”.

PROGR AMME START

Open the tap and press the

“Start (Pause)”

sequence indicator shows the current programme phase, running from left to right through wash, rinse, spin, drain. In some phases, the remaining programme time is newly calculated - if this is the case, the “green intelligence sensor” on the display will fade, and the remaining time is replaced by an animation.

“Start (Pause)”

button light becomes constant. The programme

button; the blinking

CHILD LOCK

Activating the child lock prevents children from starting a wash cycle or changing the settings of a running programme. The child lock cannot be activated or deactivated when the programme selector is in the “Off/O” position. To activate the child lock:

• Turn the programme selector to a programme position, or run a programme as usual.

• Press the “Temperature” and the “Variable spin” button simultaneously for at least 3 seconds. The “Child lock” symbol

will shortly blink and then light up to indicate that the

child lock is active.

The programme setting cannot be changed anymore; the only change possible is to switch the washer off by turning the programme selector to the “Off/O” position. To deactivate the child lock, proceed in the same way as for activating it.

RED FAILURE INDICATIONS

If one of the red failure indications on the display lights up, refer to the “Troubleshooting Guide” in your “Instructions for Use”.

PROGRAMME END

• The display shows “End”, and the “Door open” indication

lights up.

1. Turn the programme selector to the “Off/O” position.

2. Close the water tap.

3. Open the door and unload the machine.

• Leave the door ajar to allow the drum to dry.

• If you do not turn the programme selector to the “Off/O” position, all lights of the control panel go out after a few minutes to save energy - only “End” will remain on the display.

DETERGENT OVERDOSAGE INDICA TION

The symbol will light up at the end of the programme if you used too much detergent. Use less detergent next time. If the symbol lights up and the display shows “Fod”, too much foam interrupted the wash process; refer to the “Troubleshooting Guide” in your Instructions for Use.

CHANGE PROGRAMME AND/OR OPTIONS AFTER PROGRAMME START

1. Press the

2. Select the new programme, temperature, any options and

3. Press the

“Start (Pause)”

The light blinks.

another spin speed if you want.

“Start (Pause)”

programme continues at the same position where the previous programme was interrupted. Do not add detergent for this programme.

button to pause the programme.

button again. The new

RESET A RUNNING PROGRAMME BEFORE THE END

The

“Reset/Drain”

•Press the

animation appears on the display. Any existing water is drained out before the door can be opened.

button cancels a programme before the end.

“Reset/Drain”

button for at least 3 seconds; an

5019 401 05503

Black process 45.0° 150.0 LPI