Whirlpool WA PURE XXL 34 BW INSTRUCTION FOR USE

40105483aGB.fm Page 1 Tuesday, April 14, 2009 11:53 AM

GB PROGRAMME CHART

A. “D oor open” indication
This washing machine is equipped with

automatic safety functions which detect and
diagnose faults at an early stage and react
appropriately, e.g.:

B. “Service” indication
C. “Water tap closed” indication
D. “Clean pump” indication

Programme

White Cotton /

Hygiene +

Cotton

Tempe-

rature

70 - 95 °C

20 - 60 °C

Care

Labels

J

M

}

L

K

Max.
Load

kg

- Respect the manufacturer’s recommendations on the care label

8.0

Normally to heavily soiled bed linen, table linen and underwear, towels, shirts etc. made
of cotton and linen.
At a temperature of 80°C or more, this programme eliminates bacteria, ensuring
sanitization of your laundry. The bacteria removal efficiency has been tested following a

8.0

similar methodology to the NF EN 13697 standard of Nov. 2001.

Type of wash/Notes

C
D

H

}

E FG

Detergents and additives Special options

Pre-

Main

wash

❉

Softener Clean+ Start

Wash

Yes

❉❉❉❉❉ ❉❉❉

E. Programme selector
F. “Start (Pause)” button

A

G. “Variable spin” button

B

H. Programme sequence indicator

I

I. “Reset/Drain” button
J. “Start delay” button

K. “Temperature” button
L. “Child lock” button combination
M. “Detergent overdosage” indication

Pre-

wash

Intensive

rinse

delay

Easy

ironing

Rinse

hold

Variable

spin

Max
Spin

Speed

rpm

max.

Synthetics

Delicates

Wool

Handwash

Lingerie

Jeans

Sport

SuperEco

Daily load

Speed 15

Rinse & Spin

Spin

optional / Yes : dosing required

❉

:

1)

For improved garment care, spin speed is restricted in this programme.

20 - 60 °C

20 - 40 °C
20 - 40 °C

20 - 40 °C

20 - 30 °C
20 - 60 °C

20 - 30 °C

20 - 60 °C

20 - 60 °C

20 - 30 °C

——
——

Normally soiled blouses, shirts, overalls etc. made of polyester (Diolen, Trevira),

3.5

polyamide (Perlon, Nylon) or blends with cotton.

Curtains and delicate clothing, dresses skirts, shirts and blouses.

2.5

Only woollens, labelled with the Woolmark and identified as machine washable.
This programme (40°C) is tested and approved by The Woolmark Company for machine

2.0

washable wool.
Textiles made of silk, linen, wool and viscose marked as “handwashable”.

This programme (40°C) is tested and approved by The Woolmark Company for

2.0

handwashable wool.
This programme is particularly suitable to treat delicate lingerie (use of a laundry net

2.0

strongly recommended).
Normally soiled cotton jeanswear and garments made of robust jeanslike material such

7.0

as trousers and jackets.
Normally soiled and sweaty sportswear made of cotton jersey or microfibers.

This programme includes a prewash cycle – you can add detergent also to the prewash

3.5

chamber. Do not add any softener.

Slightly to normally soiled bed linen, table linen and underwear, towels, shirts etc. made
of cotton and linen.

Offers highest economy in energy consumption by prolonged washing duration. Ideal to be run

8.0

overnight to additionally profit from the more favourable energy rates. To avoid noise of
spinning at night, set spin speed to “0” and start spin programme in the morning, or define
programme start with “Start Delay” accordingly.

Slightly to normally soiled textiles made of cotton and/or synthetics.

6.0

Refreshes briefly worn outer clothing made of cotton, artificial fibers and blends with

3.0

cotton.

Same as the last rinse and the final spin in the “Cotton” programme.

8.0

In this programme spinning is intensive. Same as the spin cycle in the “Cotton” programme.

8.0

The wool and handwash cycles of this machine have been tested and approved by The Woolmark Company for the washing of
Woolmark garments labelled as “machine wash” or “hand wash” provided that the garments are washed according to the
instructions on the garment label and those issued in this programme chart. M0702

Yes

❉

Yes

❉

Yes

—

Yes

—

Yes

—

Yes

❉

Yes

❉

Yes

—

Yes

—

Yes

—
——

❉❉❉❉❉ ❉❉❉
❉

❉
❉

❉

—
—

—
—

❉❉❉❉

——

❉

❉

❉
❉

—

—

—
—

—— — —

❉❉
❉

❉
❉

——

—— —
—— —

—— —

——

—

❉

—

❉

—

❉

—— —

❉

—

❉

—— — —

❉

❉❉❉❉

❉

—

❉❉❉❉

❉

—

5019 401 05483/A

❉❉
❉❉

❉❉
❉❉

❉❉

❉❉

❉❉
❉❉

❉

max.

1000
1000

400
400

max.
max.

max.

max.

max.
max.
max.

1)

1)

1)

1)

Black process 45.0° 150.0 LPI

40105483aGB.fm Page 2 Tuesday, April 14, 2009 11:53 AM

CONSUMPTION DATA

Programme

Temp e rat u re

(°C)

White Cotton / Hygiene + 95 8.0 82

Cotton

***

60 8.0 59 1.36 2:20

Cotton 40 8.0 77 0.75 2:05
Synthetics 60 3.5 46
Synthetics 40 3.5 42 0.50 1:20

Delicates 30 2.5 60 0.40 0:45

Wool 40 2.0 60 0.60 0:45

Handwash 40 2.0 45 0.60 0:40

Lingerie 30 2.0 45 0.35 0:36

Jeans 40 7.0 95 0.80 2:21
Sport 30 3.5 54 0.55 1:34

SuperEco 60 8.0 75 0.95 4:00

Daily load 40 6.0 73 0.60 1:00

Consumption values were measured in normalized conditions in compliance with Standard IEC/EN 60 456. Consumption data in the home may va r y
with respect to the values in the table in relation to the water supply pressure and temperature, the load and the type of wash.

*
**
***

Speed 15 30 3.0 30 0.20 0:15

The time indicated on the display can deviate from the valu es in the table, because it takes into account the operation conditi ons applicable at that time.
To reduce the water temperature, some cold water is added at the end of the main wash cycle, before the pump drains the water out.
Reference Programme for Energy Label (with separator in dispenser removed for powder detergent use).

ADD DETERGENTS, CLOSE THE DOOR
AND SELECT THE PROGRAMME

Load your laundry, close the door properly and add detergent as
indicated on the front page and as described in the chapter “Detergent
and Additives” in your Instructions for Use (remove separator in
detergent dispenser for use of powder detergent if necessary).

1. Turn the

2. The

3. The indication lamp of the predefined

programme selector

display shows the programme duration in hours and minutes as well as
the predefined temperature. The

temperature

“Temperature” button.

case you want to set another spin speed, press the “Variable
spin” button .

to the desired programme. The

“Start (Pause)”

can be altered by pressing the

button blinks.

spin speed

SELECT ANY DESIRED OPTION

Push the button(s) of any option(s) desired - the respective
indication lights up.
When the combination of programme and option is not possible,
the lights switch off automatically. Unsuitable combinations of
options are deselected automatically.

“Clean +” button

• Choose this option if you use an in-wash additive for stain removal
(powder , fo r example “Vanish”) - it will optimize the additive’s
efficiency to get better wash performance and stain removal.

• Choose temperature of 30 or 40°C and use with maximum load.

• Add an appropriate amount of in-wash additive for stain
removal (powder) to the main wash chamber, together with
your detergent (only use powder detergent with this option).
Respect the manufacturer’s dosing instructions.

• Prolongs the programme by approx. 10 to 15 minutes.

• Appropriate for use of stain removers and bleaches on oxygen
basis.

Chlorine or perborate bleaches must not be used!

lights up; in

Load

Water

(kg)

“Prewash” button

• Only for heavily soiled loads (for example sand, granular dirt)

• Do not use liquid detergent for the main wash when activating

“Intensive rinse” button

• More water is added and rinse cycle is prolonged.

• This option is particularly suitable for areas with very soft

“Easy ironing” button

• Reduces creasing by an increased water quantity and a very

“Rinse hold” button

• Press the button if you want to postpone spinning to a later

• The laundry will remain in the last rinse water without

• Do not leave the laundry to soak in the “Rinse hold” for too long.

• The washing machine stops to rinse hold as soon as the “Rinse

To terminate the “Rinse hold”:

• If you want to drain only without spinning: Press the

• If you want to spin your laundry: Press the “Variable spin”

“Variable spin” button

• Every programme has a predefined spin speed.

• Press the button to set another spin speed.

• If you select spin speed “0”, the final spinning is cancelled but

Energy

(l)

(kWh)

2.10 2:10

**

0.85 1:35

**

sensible. Increases the cycle time by approximately 15 min.

the Prewash option.

water, washing baby linen and helping people with allergies.

gentle spin.

time or if you want to drain only.

progressing to the final spin cycle to avoid creasing and prevent
colours from changing.

hold” light in the programme sequence indicator blinks; the

“Start (Pause)”

button to start the drain process.

(Pause)”

button to select the desired spin speed and then

to start the spin cycle.

(Pause)”

intermediate spin peaks remain during rinse. The water is
drained out only.

Approx. Programme Duration

(hours : minutes)

button also blinks.

*

“Start

“Start

START DELAY

The “Start delay” allows to run the machine at the consumer’s
convenience, for example at night when electricity is cheaper. Do
not use liquid detergent when activating the “Start delay”.

• Select programme, temperature and options.

• Press the “Start delay” button to select a delay time up to 23
hours; the light of the

•Press the

• As soon as the programme starts, the start delay on the display

• Once having pressed the

To cancel the “Start delay”
..before you press “Start (Pause)” :

• Turn the programme selector to another position or press the

..after having pressed “Start (Pause)” :

•Press

“Start (Pause)”

delay time begins. The light of the
stops blinking and is on; the light of the start delay button will keep
blinking until the programme starts.

is replaced by the remaining programme time, and the light of
the “Start delay” button goes off.

number of hours preselected can be changed by pressing and
holding the “Start delay” button.

“Reset/Drain”

“Start (Pause)”

the display; press
selected programme immediately.

“Start (Pause)”

button ; the countdown of the

“Start (Pause)”

button .

- the delay time disappears from

“Start (Pause)”

button blinks.

“Start (Pause)”

button , the

again to start the

button

PROGR AMME START

Open the tap and press
is on. The programme sequence indicator shows the current programme
phase, running from left to right through Wash, Rinse, Spin/Drain.
The display shows the remaining programme time. Due to
variations in load and temperature of inlet water, the remaining
time is newly calculated in certain programme phases. If this is the
case,

an animation appears on the display

“Start (Pause)”

; the light stops blinking and

.

CHILD LOCK

Activating the child lock prevents children from starting a wash
cycle or changing the settings of a running programme. The child
lock cannot be activated or deactivated when the programme
selector is in the “Off/O” position. To activate the child lock:

• Turn the programme selector to a programme position, or run
a programme as usual.

• Press the 2 buttons marked with the key symbol
simultaneously for at least 3 seconds; a key-like symbol will shortly
appear on the display to indicate that the child lock is active.

Any time you try to change a programme setting with active child
lock, the display will shortly show the key-like symbol. The
programme setting cannot be changed anymore; the only change
possible is to switch the washer off by turning the programme
selector to the “Off/O” position. To deactivate the child lock:

• Press again the 2 buttons marked with the key symbol
simultaneously for at least 3 seconds.

“DOOR OPEN” INDICATION

Before starting and after end of a programme, the lamp lights to show
that the door can be opened. As long as a wash programme is running,
the door remains locked and must on no account be forced open. In
case you have an urgent need to open it during a running programme,
refer to “Reset a running programme before the end”.

RED INDICATIONS

“Service”

Lighting up of the “Service” indication can be caused by a fault in an
electrical component. Refer to the “Troubleshooting Guide” in your
Instructions for Use; if the fault persists, contact our After Sales Service.

“Water tap closed”

The appliance has no or insufficient water supply. Open the water
tap; if the indication still lights up, refer to the “Troubleshooting
Guide” in the Instructions for Use.

“Clean pump”

Waste water is not pumped out. Check whether the drain hose is
kinked or the filter must be cleaned; in the latter case refer to the
Instructions for Use (“Removing the Filter”).

PROGRAMME END

• The display shows “End” and the “Door open ” indication lights.

1. Turn the programme selector to the “Off/O” position.

2. Close the water tap.

3. Open the door and unload the machine.

• Leave the door ajar to allow the drum to dry.

DETERGENT OVERDOSAGE INDICA TION

In case you used too much detergent, a small vertical bar will light
next to the overdosage symbol on the right of the display when
the wash programme is finished; use less detergent next time. Too
much foam by detergent overdosing can also lead to interruption
of a wash cycle; in this case the display shows “Fod” - follow the
recommendations in the “Troubleshooting Guide” in your
Instructions for Use to solve the problem.

CHANGE PROGRAMME AND/OR OPTIONS
AFTER PROGRAMME START

1. Press

2. Select the new programme, temperature, any options and

3. Press

“Start (Pause)”

light blinks.

another spin speed if you want.

“Start (Pause)”

continues at the same position where the previous programme was
interrupted. Do not add detergent for this programme.

to pause the programme; the

again. The light is on, and the programme

RESET A RUNNING PROGRAMME BEFORE
THE END

The

“Reset/Drain”

the end.

•Press the
seconds; “rES” appears on the display. Any existing water is
drained before the door can be opened.

button cancels a programme before

“Reset/Drain”

button for at least 3

5019 401 05483/A

Black process 45.0° 150.0 LPI