Whirlpool WA PURE ST 34 FLD, WA UNIQ 814 ST PROGRAM CHART

GB PROGRAMME CHART

A. Programme selector B. Display C. “Temperature” button D. “Variable spin” button E. “Start delay” button F. “Start (Pause)” button G. “Reset/Drain” button H. “Favourites” button

Programme

White Cotton /

Hygiene +

Cotton

Tempe-

rature

Care

Max

Load

Labels

70 - 95 °C 8.0

20 - 60 °C

8.0

J M

Type of wash/Notes

- Respect the manufacturer’s recommendations on the care label

Normally to heavily soiled bed linen, table linen and underwear, towels, shirts etc. made of cotton and linen. At a temperature of 80°C or more, this programme eliminates bacteria, ensuring sanitization of your laundry. The bacteria removal efficiency has been tested following a similar methodology to the NF EN 13697 standard of Nov. 2001.

}

Detergents and additives Selectable options Start

wash

Pre-

❉

I. Programme sequence indication

J. “Door open” indication

K. “Child lock” indication L. “Detergent overdosage” indication

A F

Main

Softener Eco

wash

Ye s

❉❉❉❉ ❉ ❉ ❉ ❉ ❉

Eco

Pre-

wash

Vor-

wäsche

M. Red failure indications

Rinse

Intensive

rinse

Intensiv

spülen

Steam stain

removal

Dampf

intensiv-

waschen

hold

Spül-

stopp

sanitization

Steam

Dampf

Hygiene

delay

Start-

vorwahl

Var iab le

spin

Schleu-

dern

Spin

Max Spin

Speed

rpm

max.

Synthetics

Delicates Fein

Wool

Handwash

Big Items

Steam

Refresh

Steam

Auto Clean

Super Eco Super Eco

Daily load Mix

Quick wash Kurz 30

Rinse & Spin Spülen & Schleudern

Spin Schleudern

❉

optional / Yes : dosing required

For improved garment care, spin speed is restricted in these programmes.

Selectable only within temperature range of 40 to 60°C.

Große

Wäschestücke

Dampf

Auffrischen

Dampf

Selbstreinigen

20 - 60 °C

20 - 40 °C

20 - 40 °C 2.0

20 - 60 °C

—

———

20 - 60 °C 8.0

20 - 60 °C

20 - 30 °C

—— ——

Normally soiled blouses, shirts, overalls etc. made of polyester (Diolen, Trevira), polyamide

3.5

(Perlon, Nylon) or blends with cotton.

Curtains and delicate clothing, dresses, skirts, shirts and blouses.

2.5

Only woollens, labelled with the Woolmark and identified as machine washable. This programme (40°C) is tested and approved by The Woolmark Company for machine washable wool.

Textiles made of silk, linen, wool and viscose marked as “handwashable”. This programme (40°C) is tested and approved by The Woolmark Company for handwashable wool.

Blankets made of synthetic fibres; bed covers filled with feathers, polyester or other artificial

3.0

fibres; sleeping bags, bathmats and similar items.

Clean and dry laundry items made of cotton and/or synt

Refreshes, reduces smells, moderates creasing and makes the items ready to wear

1.0

minutes. After programme end, immediately put the laundry on hangers for 10 minutes before using. During this programme “St” appears on the display.

Self-cleaning programme. Cleans the interior of your washing machine and thus helps to avoid smells or deposits. Run this programme regularly if you never or seldom wash your laundry at temperatures over 60°C or if your washing machine has not been in use for a long

IMPORTANT: Do not load any laundry!

time.

During this programme “St” appears on the display.

Slightly to normally soiled bed linen, table linen and underwear, towels, shirts etc. made of cotton and linen.

Offers highest economy in energy consumption by prolonged washing duration. Ideal to be run overnight to additionally profit from the more favourable energy rates. To avoid noise of spinning at night, set spin speed to “0” and start spin programme in the morning, or define programme start with “Start delay” accordingly.

Slightly to normally soiled textiles made of cotton and/or synthetics.

6.0

Briefly worn outer clothing made of cotton, artificial fibers and blends with cotton.

6.0

Same as the last rinse and the final spin in the “Cotton” programme.

8.0

In this programme spinning is intensive. Same as the spin cycle in the “Cotton” programme.

8.0

The wool and handwash cycles of this machine have been tested and approved by The Woolmark Company for the washing of Woolmark garments labelled as “machine wash” or “hand wash” provided that the garments are washed according to the instructions on the garment label and those issued in this programme chart. M0702

hetics which were already used.

or use within 20

Ye s

❉

—

❉

❉❉❉❉ ❉ ❉ ❉ ❉ ❉

Ye s

❉

❉❉

—

——

❉❉ ❉

—

—— —

❉

—— —

❉

—— —

——

—————— — — —

Ye s

—

Ye s

—

Ye s

— ——

❉

❉ ❉

——

—— ——

❉❉

❉

—— —

❉❉

——

—————— — — —

5019 401 05485

❉❉

❉

——

❉

——

❉❉

❉❉ ❉❉

❉❉

max.

1000

400

1000

max.

max. max.

max.

CONSUMPTION DATA

Programme

White Cotton / Hygiene + 95 8.0 82

Cotton 60 8.0 77 1.52 2:10

Cotton with “Eco”

Cotton 40 8.0 77 0.75 Synthetics 60 3.5 46 Synthetics 40 3.5 42 0.50 1:20

Delicates 30 2.5 60 0.40

Handwash 40 2.0 45 0.60 0:40

Big Items 40 3.0 74 0.75 1:30

Steam Refresh — 1.0 0.5 0.20

Steam Auto Clean — — 11 0.50

SuperEco 60 8.0 75 0.95 4:00

Daily load 40 6.0 73 0.60

Consumption values were measured in normalized conditions in compliance with Standard IEC/EN 60 456. Consumption data in the home may vary with respect to the values in the table in relation to the water supply pressure and temperature, the load and the type of wash.

* ** ***

ADD DETERGENTS, CLOSE THE DOOR AND SELECT THE PROGRAMME

Add detergent as indicated on the front page and as described in the chapter “Detergent and Additives” in your Instructions for Use (remove separator in detergent dispenser for use of powder detergent if necessary). Turn the programme selector to the desired programme; the light of the

speed

“Temperature” button or the “Variable spin” button.

Quick wash 30 6.0 73 0.30

The time indicated on the display can deviate from the values in the table, because it takes into account the operation conditions applicable at that time. To reduce the water temperature, some cold water is added at the end of the main wash cycle, before the pump drains the water out. Reference Programme for Energy Label (with separator in detergent dispenser removed for use of powder detergent).

“Start (Pause)”

indicated on the display can be altered by pressing the

***

Wool 40 2.0 60 0.60

button blinks. The

Te m p e r a t u r e

(°C)

60 8.0 64 1.36 2:20

temperature

SELECT ANY DESIRED OPTION

When the combination of programme and additional option(s) is not possible, the indication lights switch off automatically. Unsuitable combinations of options are deselected automatically.

“Eco” button

• With a modified temperature profile and a slightly prolonged washing duration, the optimum combination of excellent washing result and even lower energy consumption is achieved.

“Prewash” button

• Only for heavily soiled loads (for example sand, granular dirt) sensible. Increases the cycle time by approximately 15 min.

• Do not use liquid detergent for the main wash when activating the “Prewash” option.

“Rinse hold” button

• The laundry remains in the last rinse water, without progressing to the fnal spin cycle, to avoid creasing and prevent colours from changing.

• The programme stops to “Rinse hold” when the “Rinse hold” symbol on the display blinks; the light of the

(Pause)”

button blinks as well.

• To terminate the “Rinse hold” by draining the water, without any spinning, press the

“Start (Pause)”

button.

and

“Start

Load

Wat er

(kg)

• To terminate the “Rinse hold” by spinning the laundry, press

• Do not leave the laundry to soak for too long in the “Rinse hold”.

“Intensive rinse” button

• More water is added and rinse cycle is prolonged.

• This option is particularly suitable for areas with very soft water or

spin

“Variable spin” button

• Every programme has a predefined spin speed.

• Press the button to set another spin speed.

• If spin speed “0” is selected, the final spinning is cancelled but

“Steam Stain Removal” button

• Treats the laundry with hot steam during the wash cycle in

• Selectable for laundry made of cotton and/or synthetics within

• If you select this option, “St” appears on the display during the

“Steam Sanitization” button

• Eliminates bacteria and helps sanitizing the laundry.

• Selectable for cotton and/or synthetic laundry items with care

• Prolongs the programme by approximately half an hour to an

• If you select this option, “St” appears on the display during the

Energy

(l)

(kWh)

2.40 2:10

0.85 1:35

the "Variable spin" button to select the desired spin speed and

“Start (Pause)”

then

for washing baby linen, and helps people with allergies.

intermediate spin peaks remain during rinse. The water is drained out only.

order to help removing stains.

temperature range of 40 to 60°C.

steam phases.

label within temperature range of 40 to 60°C; do not load more than 6kg cotton laundry when activating this option.

hour, depending on the load size.

steam phases.

Approx. Programme Duration

(hours : minutes)

2:05

0:45 0:45

0:10 0:35

1:00 0:30

to start the spin cycle.

SAVE YOUR FAVOURITE PROGRAMMES

If there is a programme setting which you use frequently, the appliance offers the possibility to save one setting for each programme so that it can be used again by just pushing one button.

• Select the desired programme, temperature, spin speed and option(s), push and hold the seconds. The lamp of the then lights up - the programme setting is saved.

Next time you want to use your individual programme setting, select the programme, push the

“Start (Pause)”

pushing If you want to replace the saved programme setting by another one, proceed as already described above.

“Favourites”

button for at least 3

button shortly blinks and

button and start by

START DELAY

The “Start delay” allows to run the machine at the consumer’s convenience, for example at night when electricity is cheaper. Do not use liquid detergent when activating the “Start delay”.

• Select programme, temperature, spin speed and options.

• Press the Start delay button to select one of the delay time steps between 0:30 and 23:00 hours.

•Press the

• The time delay indication disappears when the programme

To cancel the “Start delay” ..before you press the “Start (Pause)” button:

• Press the

..after having pressed the “Start (Pause)” button:

Press t he the display; press programme immediately.

“Start (Pause)”

becomes solid. The countdown of the delay time begins; the clock symbol next to the delay time and the colon between hours and minutes blink.

starts and it is replaced by the remaining programme time.

“Reset/Drain”

“0:00” - the delay time disappears after a few seconds.

“Start (Pause)”

button; the light stops blinking and

button, or set the start delay time to

button - the delay time disappears from

again to start the selected

“DOOR OPEN” INDICATION

Before starting and after end of a programme, the symbol lights to show that the door can be opened. As long as a wash programme is running, the door remains locked and must on no account be forced open. In case you have to open it urgently during a running programme, refer to “Reset a running programme before the end”.

PROGRAMME START

Open the tap and press the

“Start (Pause)”

sequence indicator shows the current programme phase, running from left to right through wash, rinse, spin, drain. In some phases, the remaining programme time is newly calculated - if this is the case, the “green intelligence sensor” on the display will fade, and the remaining time is replaced by an animation.

“Start (Pause)”

button light becomes constant. The programme

button; the blinking

CHILD LOCK

Activating the child lock prevents children from starting a wash cycle or changing the settings of a running programme. The child lock cannot be activated or deactivated when the programme selector is in the “Off/O” position. To activate the child lock:

• Turn the programme selector to a programme position, or run a programme as usual.

• Press the “Temperature” and the “Variable spin” button simultaneously for at least 3 seconds. The “Child lock” symbol

will shortly blink and then light up to indicate that the

child lock is active.

The programme setting cannot be changed anymore; the only change possible is to switch the washer off by turning the programme selector to the “Off/O” position. To deactivate the child lock, proceed in the same way as for activating it.

RED FAILURE INDICATIONS

If one of the red failure indications on the display lights up, refer to the “Troubleshooting Guide” in your “Instructions for Use”.

PROGRAMME END

• The display shows “End”, and the “Door open” indication

lights up.

1. Turn the programme selector to the “Off/O” position.

2. Close the water tap.

3. Open the door and unload the machine.

• Leave the door ajar to allow the drum to dry.

• If you do not turn the programme selector to the “Off/O”

position, all lights of the control panel go out after a few minutes to save energy - only “End” will remain on the display.

DETERGENT OVERDOSAGE INDICATION

The symbol will light up at the end of the programme if you used too much detergent. Use less detergent next time. If the symbol lights up and the display shows “Fod”, too much foam interrupted the wash process; refer to the “Troubleshooting Guide” in your Instructions for Use.

CHANGE PROGRAMME AND/OR OPTIONS AFTER PROGRAMME START

1. Press the

2. Select the new programme, temperature, any options and

3. Press the

“Start (Pause)”

The light blinks.

another spin speed if you want.

“Start (Pause)”

programme continues at the same position where the previous programme was interrupted. Do not add detergent for this programme.

button to pause the programme.

button again. The new

RESET A RUNNING PROGRAMME BEFORE THE END

“Reset/Drain”

The

• Press the

animation appears on the display. Any existing water is drained out before the door can be opened.

button cancels a programme before the end.

“Reset/Drain”

button for at least 3 seconds; an

5019 401 05485