Whirlpool WA PURE ST 14 FLD INSTRUCTION FOR USE

40105425GB.fm Page 1 Thursday, September 6, 2007 6:16 PM

GB PROGRAMME CHART

A. “Door open” indication This washing machine is equipped with

automatic safety functions which detect and diagnose faults at an early stage and react appropriately, e.g.:

B. “Service” indication C. “Water tap closed” indication D. “Clean pump” indication

Programme

White Cotton /

Hygiene +

Coloured

Cotton

SuperEco SuperEco

Synthetics Pflegeleicht

Kochwäsche

Hygiene +

Buntwäsche

Tempe-

rature

70 - 95 °C

20 - 60 °C

Care

Labels

F K

Max

Load

- Respect the manufacturer's recommendations on the care label

7.5

Normally to heavily soiled bed linen, table linen and underwear, towels, shirts etc. made of cotton and linen. At a temperature of 80°C or more, this programme eliminates bacteria, ensuring sanitization of your laundry. The bacteria removal efficiency has been tested following a similar methodology to the NF EN 13697 standard of Nov. 2001.

7.5

Slightly to normally soiled bed linen, table linen and underwear, towels, shirts etc. made of cotton and linen.

Offers highest economy in energy consumption by prolonged washing duration. Ideal to

7.5

be run overnight to additionally profit from the more favourable energy rates. To avoid noise of spinning at night, set spin speed to “0” and start spin programme in the morning, or define programme start with “Start delay” accordingly.

Normally soiled blouses, shirts, overalls etc. made of polyester (Diolen, Trevira),

3.5

polyamide (Perlon, Nylon) or blends with cotton.

Type of wash/Notes

C D

Detergents and additives Special options Start

Pre-

wash

❉

—

❉

Main wash

Yes

E. Programme selector

F. “Start” button G. “Variable spin” button

H. Programme sequence indicator

I. “Reset” button J. “Start delay” button K. “Temperature” button

Softener

Pre-

Rinse

hold

Spül-

stopp

Intensive

rinse

Intensiv

spülen

wash

Vor-

wäsche

❉❉❉❉❉ ❉ ❉ ❉❉

—

❉

❉❉

❉❉❉❉❉ ❉ ❉ ❉❉

L. Display

Eco +

Öko +

Steam

sanitization

Dampf

Hygiene

Steam stain

removal

Dampf Intensiv-

waschen

—— —

delay

Start-

vorwahl

❉❉

Variable

spin

Schleu-

dern

Spin

Max Spin

Speed

rpm

max.

1000

Daily load Mischwäsche

Quick wash Schnelle Wäsche

Steam Refresh

Steam

Auto Clean

Delicates Feinwäsche

Wool Wolle

Handwash /

Lingerie

Rinse & Spin

Spin Schleudern

Drain Abpumpen

❉

: optional / Yes : dosing required

For improved garment care, spin speed is restricted in these programmes.

Only selectable within the temperature range of 40 - 60°C.

Black process 45.0° 100.0 LPI

Dampf

Auffrischen

Dampf

Selbstreinigen

Dessous

Handwäsche

Spülen &

Schleudern

20 - 60 °C

20 - 30 °C

—

———

20 - 40 °C 20 - 40 °C

20 - 40 °C

—— ——

———

Slightly to normally soiled textiles made of cotton and/or synthetics.

6.0

Shortly worn outer clothing made of cotton, polyester, polyamide and blends with

6.0

cotton. Clean and dry laundry items made of cotton and/or synthetics which were already

used.

Refreshes, reduces smells, moderates creasing and makes the items ready to wear or

1.0

use within 20 minutes. After programme end, immediately put the laundry on hangers for 10 minutes before using. During this programme “St” appears on the display.

Self-cleaning programme. Cleans the interior of your washing machine and thus helps to avoid smells or deposits. Run this programme regularly if you never or seldom wash your laundry at temperatures over 60°C or if your washing machine has not been in use for a long time.

During this programme “St” appears on the display.

Curtains and delicate clothing, dresses skirts, shirts and blouses.

2.5

Only woollens, labelled with the Woolmark and identified as machine washable. This programme (40°C) is tested and approved by The Woolmark Company for

2.0

machine washable wool. Textiles made of silk, linen, wool and viscose marked as “handwashable”.

Up to a temperature of 30°C, this programme is particularly suitable to treat delicate lingerie (use of a laundry net strongly recommended).

2.0

This programme (40°C) is tested and approved by The Woolmark Company for handwashable wool.

Same as the last rinse and the final spin in the “Cotton” programme.

7.5

In this programme spinning is intensive. Same as the spin cycle in the “Cotton”

7.5

programme. Drain only - no spinning. Alternative method of terminating programme after “Rinse

Hold”.

IMPORTANT: Do not load any laundry!

The wool and handwash cycles of this machine have been tested and approved by The Woolmark Company for the washing of Woolmark garme nts labelled as “machine wash” or “hand wash” pr ovided that the garments are washed according to the instructions on the garment label and those issued in this programme chart.

— —

Yes Yes

—

❉ ❉

—

❉❉ ❉

—— —

—— — —

——————— — —

Yes

❉

Yes

—

Yes

—

——

❉❉❉

—

❉

—

❉

—

❉

—— — — —— — —

❉

—— — —

❉

❉❉

—— —

——————— — —

❉❉ ❉❉

❉

❉ ❉❉

❉❉

❉❉ ❉❉

max. max.

——

1000

400

max. max.

——————— — — ———

M0702

5019 401 05425

40105425GB.fm Page 2 Thursday, September 6, 2007 6:16 PM

CONSUMPTION DATA

Programme

Temperature

(°C)

White Cotton / Hygiene + 95 7.5 78

Load

(kg)

Water

(l)

Energy

(kWh)

Approx. Programme Duration

(hours : minutes)

2.25 2:10

Coloured Cotton 60 7.5 73 1.42 2:10

Coloured Cotton with “Eco +”

***

60 7.5 65 1.27 2:20

Coloured Cotton 40 7.5 73 0.80 2:05

SuperEco 60 7.5 69 0.90 4:00

Synthetics 60 3.5 48

0.95 1:35

Synthetics 40 3.5 44 0.55 1:20 Daily load 40 6.0 75 0.70 1:00

Quick wash 30 6.0 68 0.35 0:30

Steam Refresh — 1.0 1 0.20 0:10

Steam Auto Clean — — 11 0.50 0:35

Delicates 30 2.5 60 0.45 0:50

Wool 40 2.0 60 0.65 0:45

Handwash 40 2.0 45 0.65 0:40

Handwash / Lingerie 30 2.0 45 0.35 0:36

Consumption values were measured in normalized conditions in compliance with Standard IEC/EN 60 456. Consumption data in the home may vary with respect to the values in the table in relation to the water supply pressure and temperature, the load and the type of wash.

The time indicated on the display can deviate from the values in the table, because it takes into account the operating conditions

applicable at that time. To reduce the water temperature, some cold water is added at the end of the main wash cycle, before the pump drains the water out.

Reference Programme for Energy Label.

***

ADD DETERGENTS, CLOSE THE DOOR AND SELECT THE PROGRAMME

Add detergent as indicated on the front page and as described in the chapter “Detergent and Additives” in your Instructions for Use.

1. Turn the

2. The

3. The indication lamp of the predefined

programme selector

programme. The display shows the programme duration in hours and minutes as well as the predefined temperature. The

temperature

“Temperature” button. lights up; in case you want to set another spin speed,

press the “Variable spin” button.

“Start”

can be altered by pressing the

to the desired

button flashes.

spin speed

SELECT ANY DESIRED OPTION

Push the button(s) of any option(s) desired - the respective indication lights up. When the combination of programme and additional option(s) is not possible, the indication lights switch off automatically. Unsuitable combinations of options are deselected automatically.

“Prewash” button

• Only for heavily soiled loads (for example sand, granular dirt) sensible. Increases the cycle time by approximately 15 min.

• Do not use liquid detergent for the main wash when activating the Prewash option.

“Rinse hold” button

• The laundry remains in the last rinse water without progressing to the final spin cycle to avoid creasing and prevent colours from changing.

• This option is particularly recommended for the programmes “Synthetics”, “Daily load” and “Delicates”.

• It is particularly useful if you want to postpone spinning to a later time, or if you want to drain only.

• If you select “Rinse hold”, do not leave the laundry to soak for too long.

The programme stops to “Rinse hold” at the

Note:

time the “Rinse hold” light in the programme sequence indicator is on. The light over the flashes.

Terminate the “Rinse hold” option:

• P ress the terminate automatically with the final spin cycle for the present wash programme.

• If you do not wish to spin the clothes, turn the programme selector to the “Drain” programme and press the

“Intensive rinse” button

• More water is added and rinse cycle is prolonged.

• This option is particularly suitable for areas with very soft water, washing baby linen and helps people with allergies.

“Eco +” button

• With a modified temperature profile and a slightly prolonged washing duration, the optimum combination of excellent washing result and even lower energy consumption is achieved..

“Variable spin” button

• Every programme has a predefined spin speed.

• Press the button to set another spin speed.

• If spin speed “0” is selected, the final spinning is cancelled but intermediate spin peaks remain during rinse. The water is drained out only.

button; the programme will

“Start”

button.

“Start”

button

“Steam Sanitization” button

• Eliminates bacteria and he lps sanitizing the laundry.

• Appropriate for cotton and/or synthetic laundry items with care label within temperature range of 40 to 60°C.

• Prolongs the programme by appr ox. half an hour to an hour , depending on the load size.

• If you select this option, “St” appears on the display during the steam phase.

“Steam Stain Removal” button

• Treats the laundry with hot steam during the wash cycle in order to help removing stains.

• Selectable for laundry made of cotton and/or synthetics within temperature range of 40 to 60°C.

• If you select this option, “St” appears on the display during the steam phase.

START DELAY

The “Start Delay” allows to run the machine at the consumer’s convenience, for example at night when electricity is cheaper. Do not use liquid detergent when activating the “Start Delay”.

• Select programme, temperature and options.

• Press the “Start Delay” button to select the delay time by 1 to 23 hours;

• Press the The indication light next to the “Start Delay” button lights up and the countdown of the delay time begins. During the countdown, the light over the “Start Delay” button and the dot between hours and minutes on the display flash.

• The time delay indication disappears when the programme starts and it is replaced by the remaining programme time.

• Once having pressed the hours preselected can be reduced by pressing and holding the “Start Delay” button. From 1 hour on, the delay time can also be reduced by minutes.

To cancel the “Start Delay” ..before you press the “Start” button:

• Turn the programme selector to another position or press the

..after having pressed the “Start” button:

• Press the start delay time disappears from the display.

button.

“Start”

button, the number of

“Start”

button.

“Reset”

button for at least 3 seconds - the

“Reset”

PROGR AMME START

Open the tap and press the the indicator shows the current programme phase, running from left to right through Wash, Rinse, Spin/Drain. The display shows the remaining programme time. Due to variations in load and temperature of inlet water, the remaining time is newly calculated in certain programme phases. If this is the case,

button is on. The programme sequence

“Start”

an animation appears on the display

button. The light over

“Start”

“DOOR OPEN” INDICATION

Before starting and after end of a programme, the lamp lights to show that the door can be opened. As long as a wash programme is running, the door remains locked and must on no account be forced open. In case you have an urgent need to open it during a running programme, refer to “Cancel (Reset) a running programme before the end”.

RED INDICATIONS

“Service”

Lighting up of the “Service” indication can be caused by a fault in an electrical component. Refer to the “Troubleshooting Guide” in your Instructions for Use; if the fault persists, contact our After Sales Service.

“Water tap closed”

The appliance has no or insufficient water supply. Open the water tap; if the indication still lights up, refer to the “Troubleshooting Guide” in your Instructions for Use.

“Clean pump”

Waste water is not pumped out. Check whether the drain hose is kinked or the filter must be cleaned; in the latter case refer to the Instructions for Use (“Removing the Filter”).

PROGRAMME END

• All the lights of the programme sequence indicator are off, and the “Door open” indication lights up.

1. Turn the programme selector to the “Off/O” position.

2. Close the water tap.

3. Open the door and unload the machine.

4. Leave the door ajar to allow the drum to dry.

CHANGE PROGRAMME AND/OR OPTIONS AFTER PROGRAMME START

1. Press the The light flashes.

2. Select the new programme, temperature, any options and another spin speed if you want.

3. Press the continues at the same position where the previous programme was interrupted. Do not add detergent for this programme.

button to pause the programme.

“Start”

button again. The new programme

“Start”

CANCEL (RESET) A RUNNING PROGRAMME BEFORE THE END

The

• Press the

button cancels a programme before the end.

“Reset”

button for at least 3 seconds;

“Reset”

“rES” appears on the display. Any existing water is drained out before the door can be opened. Caution! The washing might still be hot.

5019 401 05425

Black process 45.0° 100.0 LPI