Whirlpool WAE 8788 INSTRUCTION FOR USE

4gb05134.fm Page 1 Tuesday, March 16, 2004 10:12 PM
GB WAE 8788 PROGRAMME GUIDE
This washing machine is equipped with
automatic safety functions
A. “Water Tap closed” indicator
Check your washing machine's water supply.
B. “Door Locked” indicator
which detect faults
A
C
B
D
E
F
G
H
C. “Start/Pause” button D. “Start Delay” button E. Programme sequence indicator
{
F. Temperature selection buttons G. “Speed Reduction” button H. Operation indicators
Programme
Cotton
Algodón
Synthetic
Sintéticos
Daily mixed
Prendas Mixtas
Delicate
Delicados
Wool Lana
Rapid wash
Rápido
Handwash
Lav. a Mano
Rinse + Spin
Aclarado + Centrif.
Intensive Spin
Centrif. Intensivo
Gentle spin
Centrif. Delicado
Drain
Vaciado/Inicio
Detergent and Additives Selectable special options =
Max.
Care
Labels
Normally to heavily soiled bed linen, table linen and underwear, towels, shirts etc. made of cotton and linen.
Normally soiled blouses, shirts and other outer clothing made of polyester (Diolen, Trevira), polyamide (Perlon, Nylon) or mixtures of these fibres with cotton.
Slightly to normally soiled textiles made of cotton and/or synthetic fibres.
Curtains and delicate dresses, skirts, shirts and blouses.
Only woollens with a felt-free finish, labelled with the woolmark and identified as machine washable.
Hardly worn outer and sport clothing made of cotton, polyester, polyamid and mixed cotton fabrics.
Textiles made of linen, silk, wool or viscose marked as “handwashable”.
Type of wash/
Degree of soiling
–– ––
––
load
Kg
6.0
2.5
3.0
1.5
1.0
3.0
1.0
6.0
6.0
1.5
Softe-
ner
❉ ❉
Main wash
Pre-
wash
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Pre-
wash
Pre-
lavado
❉❉ ❉ ❉ ❉ ❉ ❉❉
❉❉ ❉ ❉
––
❉❉
–– –
–– –
–– –
–––
Intensive
Rinse
Aclarado Intensivo
Rinse
hold
Paro Con
Cuba Llena
❉❉❉ ❉
❉ ❉
❉❉
❉❉❉
–––– – – –––– – –
Speed
reduction
Centri­fugado
1)
1)
1)
2)
1)
––
Easy
ironing
Facilidad
Planchado
Eco
Plus
Eco
Plus
Start delay
Inicio
Retar-
dado
❉❉❉
––
––
–– ––
–– ––
Tem pe -
rature
°C rpm
20
to 95
20
to 60
❉ ❉
❉ ❉
30
to 60
20
to 40
20
to 40
20
to 60
20
to 30
20 1400
– –
––
Max.
spin
speed
“Prewash” can be additionally
1400
selected for heavily soiled laundry at any temperature.
“Prewash” can be additionally
1)
1000
selected for heavily soiled laundry.
In this programme the spin speed
1400
should be adapted to the fabrics.
1)
1000
If you select “Rinse Hold” do not
1)
1000
leave items to soak for too long.
1400
If you select “Rinse Hold” do not leave items to soak for too long. A
2)
400
very gentle spin is used in this programme.
Same as the spin cycle in the “Coloured Cotton” programme.
In this programme spinning is
1400
intensive. Same as the spin cycle in the “Coloured Cotton” programme.
A very gentle spin is used in this
1)
1000
programme. Same as the spin cycle in the “Wool” programme.
This programme only drains (alternative method of terminating the programme after “Rinse Hold” without spinning). In addition all running programmes can be cancelled with this programme.
Notes
1)
For improved garment care spin speed is restricted to 1000 rpm in this programme.
2)
For improved garment care spin speed is restricted to 400 rpm in this programme.
Black process 45.0° 100.0 LPI
5019 401 05134
4gb05134.fm Page 2 Tuesday, March 16, 2004 10:12 PM
CONSUMPTION DATA
Temperature
Programme
(°C)
Wash
(kg)
Water
(l)
Energy
(kWh)
Programme
duration **
approx.
(hours : minutes)
Cotton 95 6.0 49*** 1.90 2:00 Cotton 60 6.0 44 1.14 2:20
Cotton with “Eco Plus” **** 60 6.0 44 1.02 2:30
Cotton 40 5.0 42 0.70 2:00
Daily Mixed 40 3.0 43 0.55 1:00
Synthetic 60 2.5 55*** 0.70 1:30 Synthetic 40 2.5 50 0.50 1:15
Delicate 30 1.5 60 0.50 0:45
Wool 40 1.0 60 0.50 0:40
Rapid wash 30 3.0 37 0.40 0:30
Handwash 30 1.0 45 0.40 0:35
* Consumption values were measured in normalized conditions in compliance with Standard IEC 60456. ** The programme duration may also vary from the chart values. The washing machine is able to allow for particular household
conditions and to adapt the programme run time ac cording ly.
*** To reduce the water temperature, some cold water is added at the end of the main wash cycle, before the pump dr ains
the water out.
****Reference Programme for Energy Label
POUR IN DETERGENT, CLOSE THE DOOR AND SELECT A PROGRAMME
Add the detergent as described in the chapter “Detergent and Additives” in the booklet.
1. Turn the programme selector knob in any direction to the desired programme. The remaining time display shows the duration of the chosen programme (in hours and minutes) and the pilot lamp above the “Start/ Pause” button is flashing.
2. The programme sequence indicator and the indicator with the maximum possible spin speed light up.
3. The temperature can be altered by pressing the “+” or “-” button under the corresponding LED display.
SELECT SPECIAL OPTIONS ­The indicator lights go on.
“Prewash” button
• Only for heavily soiled laundry (for example sand
or granular dirt). Programme duration is increased by some 15 min.
“Intensive Rinse” button
• An additional rinse cycle is carried out.
• This additional option is particularly suitable for
“Rinse Hold” button
• The laundry remains in the last rinse water without being spun: discoloration of the laundry and additional creasing are prevented.
• This additional option is particularly recommended for the programme “Synthetics” or “Delicates”.
• This additional function is particularly useful if you want to postpone spinning to a later time.
Note: The programme has reached the “Rinse Hold” when the “Rinse Hold” button light flashes.
Terminate the “Rinse Hold” option:
• Press the “Rinse Hold” button again; the programme will terminate automatically with the appropriate spin cycle for the current programme.
• If you do not wish to spin the clothes, turn the programme selector knob to “Drain/Cancel” and press the “Start/Pause” button again.
“Speed Reduction” button
• A maximum spin speed is assigned to each programme.
• Press the button to set another speed for the spin cycle.
• If the spin speed “0” is selected, the final spin is cancelled. The water is only drained out.
areas with very soft water, for washing baby linen and helping people with detergent allergies.
“Easy Ironing” button
• To lessen creasing, the water quantity is increased and the clothes are spun very gently at reduced power. This makes your laundry significantly damper at the end of the programme.
“Eco Plus” button
• With a modified temperature profile and a slightly prolonged washing duration, the optimum combination of excellent washing result and even lower energy consumption can be achieved.
START DELAY
The “Start Delay” allows to run the machine at the consumer's convenience, for example at night when electricity is cheaper.
• Press the “Start Delay” button. Select the programme start from 1 to 19 hours ahead by pressing the button again.
• Press the “Start/Pause” button. The Start Delay indicator light flashes until the programme starts.
• During programme start the remaining time appears in the digital display.
“Start Delay” correction.
• Before the “Start Delay” has been started: The preset number of hours can be altered by continuously pressing the “Start Delay” button. The number of hours can be reduced by first turning the programme selector switch to the “Off” position. Then set the programme again and select the desired number of hours.
• After the “Start Delay” has been started: The preset number of hours can be reduced by pressing the “Start Delay” button again. To increase the number of hours preselected, first turn the programme selector switch to the “Off” position. Then set the programme and the additional options again and select the desired number of hours.
PROGRAMME START
After you have selected the programme and the additional option, the indicator light over the “Start/Pause” button flashes. Turn on the tap and start the programme by pressing the “Start/ Pause” button. Now the indicator light above the button goes on.
In addition, all programme phases are indicated by the associated lights. After the end of a programme phase the associated indicator light goes out. Thus the programme sequence indicator moves from left to right across the wash, rinse and spin phases. At the end of the programme only the “End” indicator is still on.
DOOR LOCK
In the first 15 minutes after the start of the “Coloured Cotton” and “Synthetic” programmes the door can be opened to add further laundry. This is not possible if “Rapid Wash” is selected.
PROGRAMME END
• The remaining time display shows “0:00” and the “End” indicator lights up.
1. Turn the programme selector knob to the “Off” position.
2. Turn off the tap.
3. Open the door and unload the machine.
RESELECT AFTER PROGRAMME START
A newly-selected programme will continue in the same programme section during which the current programme was interrupted. Therefore do not add any more detergent.
1. Press the “Start/Pause” button to interrupt the programme. The indicator light flashes.
2. Select the new programme (with temperature), any additional options and - if you wish - another spin speed.
3. Press the “Start/Pause” button again to restart the programme.
• If you are in the “Prewash” programme step this additional option can not be deselected as described (to do this see “Interrupt/Cancel Programme).
CANCEL/DELETE PROGRAMME
1. Press the “Start/Pause” button to interrupt the programme. The indicator light flashes.
2. Set the programme selector to “Drain/Cancel”. The spin speed “0” and the remaining time “2 minutes” are displayed.
3. Press the “Start/Pause” button to start the “Drain/Cancel” programme.
5019 401 05134
Black process 45.0° 100.0 LPI
Loading...