Whirlpool WAE 8785/4 INSTRUCTION FOR USE
4gb05202.fm Page 1 Saturday, July 17, 2004 11:02 AM
GB WAE 8785 PROGRAMME CHART
This washing machine is equipped with
automatic safety functions
at an early stage and react appropriately, e.g.:
A. “Water Tap closed” indicator
Check your washing machine's water supply.
B. “Water Stop” indicator
Can be released by excess foaming or a leak in
the appliance (see also instructions for use
“Troubleshooting”).
which detect faults
A
B
D
C
E
F
G
C. “Door Locked” indicator
D.“Start/Pause” button
I
{
H
E. “Start Delay” button
F. Programme sequence indicator
G. Temperature selection buttons
H.“Speed R eduction” button
I. Operation indicators
Programme
Cotton
Synthetics
Daily Mixed
Delicate
Wool
Rapid wash
Handwash
Rinse + Spin
Intensive Spin
Spin
Drain
1)
For improved garment care spin speed is restricted to 1000 rpm in this programme.
2)
For improved garment care spin speed is restricted to 400 rpm in this programme.
Coton Blanc
Kookwas
Synthétiques
Synthetisch
Magic
Gemengde was
Délicat
Fijne was
Laine
Wol
Express
Expres
Lavage Main
Handwas
Rinçage + Essorage
Spoelen +Centrif.
Intensif Essorage
Intensief Centrif.
Essorage
Centrif.
Vidange
Afpompen
Care
Labels
Normally to heavily soiled bed linen, table
linen and underwear, towels, shirts etc.
made of cotton and linen.
Normally soiled blouses, shirts and other
outer clothing made of polyester (Diolen,
Trevira), polyamide (Perlon, Nylon) or
mixtures of these fibres with cotton.
Slightly to normally soiled textiles made of
cotton and/or synthetic fibres.
Curtains and delicate dresses, skirts, shirts
and blouses.
Only woollens with a felt-free finish,
labelled with the woolmark and identified
as machine washable.
Hardly worn outer and sport clothing
made of cotton, polyester, polyamid and
mixed cotton fabrics.
Textiles made of linen, silk, wool or
viscose marked as “handwashable”.
––
––
––
––––––
Type of wash/
Degree of soiling
Max.
load
Kg
6.0
2.5
3.0
1.5
1.0
3.0
1.0
6.0
6.0
1.5
Detergent and
Additives
Softe-
Main
ner
❉
❉
❉
❉
❉
❉
❉
❉
Pre-
wash
wash
Yes
❉❉ ❉ ❉ ❉ ❉ ❉ ❉
Yes
❉❉ ❉ ❉ ❉ ❉
Yes
–
Yes
❉❉ ❉
Yes
–
Yes
–
Yes
–
––
–––
–––
Start
delay
Départ
Différé
Start
Selectie
❉
❉
❉
❉
❉
❉
❉
❉
Selectable special options =
Pre-
Intensive
wash
Prélavage
Voorwas
Rinse
Rinçage
Intensif
Intensief
Spoelen
–
––
––
––
–
Rinse
hold
Arrêt
Cuve
Pleine
Spoelstop
❉❉ ❉ ❉
–
❉❉
❉❉
❉❉
❉❉
❉❉ ❉
–––
–––
Speed
reduction
Essorage
Centrifugeren
1)
1)
1)
2)
❉
1)
❉
❉
Easy
ironing
Repassage
facile
Gemakkelijk
Strijken
Eco+
Eco+
Eco+
❉❉
–
––
––
––
––
––
–––
–––
Temp e-
rature
20 t o 9 5 1400
20 t o 6 0 1000
30 t o 6 0 1400
20 t o 4 0 1000
20 t o 4 0 1000
20 t o 6 0 1400
20 to 30 400
Max.
spin
speed
°C rpm
20 1400
1400
1000
––– – ––––
Notes
“Prewash” can be additionally selected
for heavily soiled laundry at any
temperature.
“Prewash” can be additionally selected
1)
for heavily soiled laundry.
In this programme the spin speed
should be adapted to the fabrics.
1)
If you select “Rinse Hold” do not leave
1)
items to soak for too long.
–
–
If you select “Rinse Hold” do not leave
2)
items to soak for too long. A very
gentle spin is used in this programme.
Same as the spin cycle in the “Cotton”
programme.
In this programme spinning is
intensive. Same as the spin cycle in the
“Cotton” programme.
A very gentle spin is used in this
1)
programme. Same as the spin cycle in
the “Wool” programme.
This programme only drains
(alternative method of terminating the
programme after “Rinse Hold”
without spinning). In addition all
running programmes can be cancelled
with this programme.
5019 401 05202
Black process 45.0° 100.0 LPI
4gb05202.fm Page 2 Saturday, July 17, 2004 11:02 AM
CONSUMPTION DATA*
Programme Temp e ratur e
(°C)
Cotton 95 6.0 49*** 1.90 2:00
Cotton 60 6.0 44 1.14 2:20
Cotton with “Eco+”**** 60 6.0 44 1.02 2:30
Cotton 40 5.0 42 0.70 2:00
Synthetic 60 2.5 55*** 0.70 1:30
Synthetic 40 2.5 50 0.50 1:15
Daily Mixed 40 3.0 43 0.55 1:00
Delicate 30 1.5 60 0.50 0:45
Wool 40 1.0 60 0.50 0:40
Rapid wash 30 3.0 37 0.40 0:30
Handwash 30 1.0 45 0.40 0:35
* Consumption
** The
programme duration
conditions and to adapt the programme run time accordingly.
*** To reduce
water out.
****Reference Programme for Energy Label
were measured in normalized conditions in compliance with Standard IEC/EN 60456.
values
the water temperature
may also vary from the chart values. The washing machine is able to allow for particular household
, some cold water is added at the end of the main wash cycle, before the pump drains the
POUR IN DETERGENT, CLOSE THE
DOOR AND SELECT A PROGRAMME
Add the detergent as described in the chapter
“Detergent and Additives” in the booklet.
1. Turn the
programme selector knob
direction to the desired programme.
The remaining time display shows the duration
of the chosen programme (in hours and
minutes) and the pilot lamp above the
button is flashing.
Pause”
2. The programme sequence indicator and the
indicator with the maximum possible spin speed
light up.
3. The temperature can be altered by pressing the
or
“+”
button under the corresponding LED
“-”
display.
SELECT SPECIAL OPTIONS The indicator lights go on.
“Prewash” button
• Only for heavily soiled laundry (for example sand
or granular dirt). Programme duration is
increased by some 15 min.
“Intensive Rinse” button
• A n additional rinse cycle is carried out.
• This additional option is particularly suitable for
areas with very soft water, for washing baby
linen and helping people with detergent allergies.
in any
“Start/
Wash
(kg)
Water
(l)
Energy
(kWh)
Programme duration **
(hours : minutes)
“Rinse Hold” button
• The laundry remains in the last rinse water
without being spun: discoloration of the laundry
and additional creasing are prevented.
• This additional option is particularly
recommended for the programme “Synthetics”
or “Delicates”.
• This additional function is particularly useful if
you want to postpone spinning to a later time.
The programme has reached the “Rinse
Note:
Hold” when the “Rinse Hold” button light flashes.
Terminate the “Rinse Hold” option:
• Press the “Rinse Hold” button again; the
programme will terminate automatically with the
appropriate spin cycle for the current
programme.
• If you do not wish to spin the clothes, turn the
programme selector knob to “Drain” and press
the
“Start/Pause”
button again.
“Speed Reduction” button
• A maximum spin speed is assigned to each
programme.
• Press the button to set another speed for the
spin cycle.
• If the spin speed “0” is selected, the final spin is
cancelled. The water is only drained out.
approx.
“Easy Ironing” button
• To lessen creasing, the water quantity is
increased and the clothes are spun very gently at
reduced power. This makes your laundry
significantly damper at the end of the
programme.
“Eco+” button
• With a modified temperature profile and a
slightly prolonged washing duration, the
optimum combination of excellent washing
result and even lower energy consumption can
be achieved.
START DELAY
The “Start Delay” allows to run the machine at the
consumer's convenience, for example at night when
electricity is cheaper.
• Press the “Start Delay” button. Select the
programme start from 1 to 19 hours ahead by
pressing the button again.
•Press the
“Start/Pause”
button. The Start
Delay indicator light flashes until the programme
starts.
• During programme start the remaining time
appears in the digital display.
“Start Delay” correction.
• Before the “Start Delay” has been started:
The preset number of hours can be altered by
continuously pressing the “Start Delay” button.
The number of hours can be reduced by first
turning the programme selector switch to the
“Off” position. Then set the programme again
and select the desired number of hours.
• After the “Start Delay” has been started:
The preset number of hours can be reduced by
pressing the “Start Delay” button again. To
increase the number of hours preselected, first
turn the programme selector switch to the “Off”
position. Then set the programme and the
additional options again and select the desired
number of hours.
PROGRAMME START
After you have selected the programme and the
additional option, the indicator light over the
“Start/Pause”
start the programme by pressing the
Pause”
button flashes. Turn on the tap and
“Start/
button. Now the indicator light above the
button goes on.
In addition, all programme phases are indicated by
the associated lights. After the end of a programme
phase the associated indicator light goes out. Thus
the programme sequence indicator moves from left
to right across the wash, rinse and spin phases. At
the end of the programme only the “End” indicator
is still on.
DOOR LOCKED
In the first 15 minutes after the start of the “Cotton”
and “Synthetic” programmes the door can be
opened to add further laundry. This is not possible if
“Rapid Wash” is selecte.
PROGRAMME END
• The remaining time display shows “0:00” and the
“End” indicator lights up.
1. Turn the programme selector knob to the “Off”
position.
2. Turn off the tap.
3. Open the door and unload the machine.
RESELECT AFTER PROGRAMME START
A newly-selected programme will continue in the
same programme section during which the current
programme was interrupted. Therefore do not add
any more detergent.
1. Press the
“Start/Pause”
button to interrupt the
programme. The indicator light flashes.
2. Select the new programme (with temperature),
any additional options and - if you wish - another
spin speed.
3. Press the
“Start/Pause”
button again to restart
the programme.
•If you are in the “Prewash” programme step this
additional option can not be deselected as
described (to do this see “Interrupt/Cancel
Programme).
CANCEL/DELETE PROGRAMME
1. Press the
“Start/Pause”
button to interrupt the
programme. The indicator light flashes.
2. Set the programme selector to “Drain”.
The spin speed
and the remaining time “2
“0”
minutes” are displayed.
3. Press the
“Start/Pause”
button to start the
“Drain” programme.
5019 401 05202
Black process 45.0° 100.0 LPI
Loading...