Whirlpool WAE 8575 INSTRUCTION FOR USE
GB WAE 8575 PROGRAMME GUIDE
This washing machine is equipped with
safety functions
stage and react appropriately, e.g.:
A. “Tap Off” indicator
Check your washing machine's water supply.
B. “Water Stop” indicator
Can be released by excess foaming or a leak in the
appliance (see also instructions for use
“Troubleshooting”).
Programme
Cotton
Kookwas
which detect faults at an early
Care
Labels
automatic
Type of wash/
Degree of soiling
Normally soiled bed linen, table linen and
underwear, towels etc. made of cotton and linen.
SENSE
B
DYNAMIC
C
A
D
Max.
Detergent and Additives
load
Softe-
Kg h °C rpm
5,0
ner
❉
Main
wash
Yes
Kraan dicht
Start
Pauze
E
Pre-
wash
Waterstop
Deur open
Resttijd
uren min.
Start Selectie ure n
F
Start
delay
Start
Selectie
Temperatuur
G
Pre-
wash
Voorwas
°C
1200
1000
800
400
Intensief
SpoelenWassenVoorwas Spoelstop Eind eCentrifugeren
0
Selectable special options =
Intensive
Rinse
Intensief
Spoelen
❉❉ ❉ ❉ ❉ ❉ ❉
I
Makkelijk
strijken
H
Rinse
hold
Spoelstop
Kookwas
Bonte was
Synthetisch
Fijne was
Wol
{
Snelwas
Handwas
❉
Speed
reduction
Centrifugeren
Spoelen+Centrif.
Intensief Centrif.
Centrifugeren
Afpompen / Reset
WAE 8575
Made in Germany
Easy
ironing
Makkelijk
strijken
C. “Door Free” indicator
D. “Start/Pause” button
E. “Start Delay” button
F. Programme sequence indicator
G. Temperature selection buttons
H. “Speed Reduction“ button
I. Operation indicators
Tempe-
rature
20
to 95
Max.
spin
speed
1200
“Prewash” can be additionally selected for
heavily soiled laundry.
Notes
Coloured Cotton
Bonte was
Synthetics
Synthetisch
Delicate
Fijne was
Wool
Wol
Rapid wash
Snelwas
Handwash
Handwas
Rinse + Spin
Spoelen+
Centrifugeren
Intensive spin
Intensief
Centrifugeren
Gentle spin
Centrifugeren
Draining / Clearing
Afpompen/Reset
1)
For improved garment care spin speed is restricted to 1000 rpm in this programme.
2)
For improved garment care spin speed is restricted to 400 rpm in this programme.
Slightly to normally soiled bed linen, table linen
and underwear, towels, shirts etc. made of cotton
and linen.
Slightly to normally soiled blouses, shirts and
other outer clothing made of polyester
(Diolen, Trevira), polyamide (Perlon, Nylon) or
cotton blends.
Curtains and delicate dresses, skirts, shirts and
blouses.
Only woollens with a felt-free finish, labelled
with the woolmark and identified as machine
washable.
Lightly soiled outer garments and sportswear
made of cotton, polyester, polyamide and
cotton blend.
Textiles made of linen, silk, wool or viscose
marked as “handwashable”.
––
––
––
5,0
❉
2,5
❉
1,5
❉
1,0
❉
3,0
❉
1,0
❉
5,0
❉
5,0
–––
1,5
–––
––––––
Yes
Yes
Yes
Yes
Yes
Yes
❉❉ ❉ ❉ ❉ ❉ ❉
❉❉ ❉ ❉ ❉ ❉ 1)❉
❉❉ ❉
–
–
–
––
20
to 60
20
to 60
20
to 40
20
to 40
20
to 60
20
to 30
20 1200
❉
1)
1)
–
–
–
2)
–
–
❉
1)
––
––
–
❉
❉
❉
❉
❉
❉
❉
––
––
––
–
❉❉ ❉
–– –
–– –
–– – – –––
❉❉
❉❉
❉❉
❉❉
1200
1000
1000
1000
1200
400
1200
1000
“Prewash” can be additionally selected for
heavily soiled laundry.
“Prewash” can be additionally selected for
1)
heavily soiled laundry.
In this programme, selection of the special
1)
options “Intensive Rinse” and “Easy
ironing” is not possible.
If you select “Rinse Hold” do not leave
1)
items to soak for too long.
In this programme, selection of the special
options “Prewash”, “Intensive Rinse” and
“Easy Ironing” is not possible.
If you select “Rinse Hold” do not leave items
2)
to soak for too long. A very gentle spin is
used in this programme.
Same as the spin cycle in the “Coloured
Cotton” programme.
In this programme spinning is intensive.
Same as the spin cycle in the “Coloured
Cotton” programme.
A very gentle spin is used in this
1)
programme. Same as the spin cycle in the
“Wool” programme.
This programme only drains (alternative
method of terminating the programme
after “Rinse Hold” without spinning). In
addition all running programmes can be
cancelled with this programme.
5019 401 15070
CONSUMPTION DATA
Programme Temperature
White Cotton
Coloured cotton
Coloured cotton
Synthetic
Synthetic
Rapid wash
Delicate
Wool
Handwash
Consumption values
*
programme duration
** The
particular household conditions and to adapt the programme run time accordingly.
***To reduce
the pump drains the water out.
the water temperature
POUR IN DETERGENT, CLOSE THE
DOOR AND SELECT A PROGRAMME
Add the detergent as described in the chapter
“Detergent and Additives” in the booklet.
1. Turn the
programme selector knob
any direction to the desired programme.
The remaining time display shows the
duration of the chosen programme (in
hours and minutes) and the pilot lamp
above the
“Start/Pause”
flashing.
2. The programme sequence indicator and
the indicator with the maximum possible
spin speed light up.
3. The temperature can be altered by pressing
“+”
the
“-”
or
button under the
corresponding LED display.
SELECT SPECIAL OPTIONS - The
indicator lights go on.
“Prewash” button
• Only for heavily soiled laundry (for example
sand or granular dirt). Programme duration is
increased by some 15 min.
“Intensive Rinse” button
• An additional rinse cycle is carried out.
*
Load
(°C)
95 5,0 44*** 1,60 1:55
60 5,0 39 0,95 2:00
40 5,0 39 0,55 2:00
60 2,5 55*** 0,70 1:30
40 2,5 50 0,50 1:15
30 3,0 35 0,40 0:30
30 1,5 50 0,50 0:45
40 1,0 50 0,50 0:40
30 1,0 35 0,40 0:35
were measured in normalized conditions in compliance with Standard IEC 60456.
may also vary from the chart values. The washing machine is able to allow for
(kg)
, some cold water is added at the end of the main wash cycle, before
Water
(l)
Energy
“Rinse Hold” button
• The laundry remains in the last rinse
water without being spun: discoloration
of the laundry and additional creasing are
prevented.
in
• This additional option is particularly
recommended for the programme
“Synthetics” or “Delicates”.
• This additional function is particularly
useful if you want to postpone spinning
button is
to a later time.
Note:
The programme has reached the
“Rinse Hold” when the “Rinse Hold” button
light flashes.
Terminate the “Rinse Hold” option:
• Press the “Rinse Hold” button again; the
programme will terminate automatically
with the appropriate spin cycle for the
current programme.
• If you do not wish to spin the clothes,
turn the programme selector knob to
“Draining/Clearing” and press the
Start/Pause
“
“Speed Reduction” button
• A maximum spin speed is assigned to each
programme.
• Press the button to set another speed for the
spin cycle.
• This additional option is particularly
suitable for areas with very soft water, for
washing baby linen and helping people
with detergent allergies.
Programme duration
(kWh)
” button again.
**
approx.
(hours : minutes)
• If the spin speed “0” is selected, the final
spin is cancelled. The water is drained out
only.
“Easy Ironing” button
• To lessen creasing, the water quantity is
increased and the clothes are spun very
gently at reduced power. This makes your
laundry significantly damper at the end of
the programme.
START DELAY
The “Start Delay” allows to run the machine
at the consumer's convenience, for example
at night when electricity is cheaper.
• Press the “Start Delay” button. Select the
programme start from 1 to 19 hours
ahead by pressing the button again.
• Press the
“Start/Pause”
button. The
Start Delay indicator light flashes until the
programme starts.
• During programme start the remaining
time appears in the digital display.
“Start Delay” correction.
• Before the “Start Delay” has been started:
The preset number of hours can be
altered by continuously pressing the
“Start Delay” button.
The number of hours can be reduced by
first turning the programme selector
switch to the “Off” position. Then set the
programme again and select the desired
number of hours.
• After the “Start Delay” has been started:
The preset number of hours can be
reduced by pressing the “Start Delay”
button again. To increase the number of
hours preselected, first turn the
programme selector switch to the “Off”
position. Then set the programme and
the additional options again and select
the desired number of hours.
PROGRAMME START
After you have selected the programme and
the additional option, the indicator light
over the
“Start/Pause”
button flashes. Turn
on the tap and start the programme by
pressing the
“Start/Pause”
button. Now the
indicator light above the button goes on.
In addition, all programme phases are
indicated by the associated lights. After the
end of a programme phase the associated
indicator light goes out. Thus the
programme sequence indicator moves from
left to right across the wash, rinse and spin
phases. At the end of the programme only
the “End” indicator is still on.
DOOR LOCK
In the first 15 minutes after the start of the
“Cotton”, “Coloured Cotton” and “Synthetic”
programmes the door can be opened to add
further laundry. This is not possible if “Rapid
Wash” is selected.
PROGRAMME END
• The remaining time display shows “0:00”
and the “End” display lights up.
1. Turn the programme selector knob to the
“Off” position.
2. Turn off the tap.
3. Open the door and unload the machine.
RESELECT AFTER PROGRAMME START
A newly-selected programme will continue
in the same programme section during
which the current programme was
interrupted. Therefore do not add any more
detergent.
1. Press the
“Start/Pause”
button to
interrupt the programme. The indicator
light flashes.
2. Select the new programme (with
temperature), any additional options and
- if you wish - another spin speed.
3. Press the
“Start/Pause”
button again to
restart the programme.
• If you are in the “Prewash” programme step
this additional option can not be deselected
as described (to do this see “Interrupt/Cancel
Programme).
CANCEL/DELETE PROGRAMME
1. Press the
“Start/Pause”
button to
interrupt the programme. The indicator
light flashes.
2. Set the programme selector to “Draining/
Clearing”. The spin speed
“0”
and the
remaining time “2 minutes” are displayed.
3. Press the
“Start/Pause”
button to start the
“Draining/Clearing” programme.
5019 401 15070
Loading...